Arbetsorganisation i träbränsleeldande fjärrvärmeverk

The objective of this study has been to describe and analyse existing forms of organisation in heating plants using wood fuels, regarding work tasks, organisational structure, skill demands, crew recruitment, working hours and wage conditions. Sixteen plants ranging from 10 to 120 MW have been studied by means of interviews, work place observations and written material. The job of the operator of heating plants is fairly qualified, independent and varied. The most negative factor is shift work. Some of the bigger plants (enterprises) have a relatively hierarchic, segmented and perhaps also an oversized organisation. However, modern concepts of organisation, such as customer orientation, ”flat organisation”, integration of production and maintenance etc, are gaining ground. Blue collar and white collar tasks are increasingly being integrated. Some of the medium sized enterprises have reached very far and may serve as models for bigger enterprises.

Arbetsorganisation i träbränslefabriker

The objective of this study has been to describe and analyse existing forms of organisation in wood fuel plants regarding work tasks, organisational structure, work content, skill demands, crew recruitment, working hours and wage conditions. The study has been introductory, con¬sisting of 2-3 hour visits to 12 plants.The production of refined wood fuels is carried out in rather small plants. The number of employees ranges from 6 to 15 persons in the factories producing between 20 and 100 thousand tons per year. Generally one shift crew consists of only two persons. The operator job requires multiskill capacity, dexterity and autonomous problem-solving.The job can be considered as qualified, responsible, autonomous, meaningful and variable. It was generally considered that it takes about a year to become a good operator. And even after that, one is still learning. Negative factors are shift work, partly poor physical working environment (dust and noise) and, occasionally, mental pressure and overtime.Modern organisation concepts are, to a large extent, applied in the wood fuel plants. The organisation is flat, lean and customer-oriented.

TCA Evaluation : Lab Measurements, Modelling and System Simulations

The study reported here is part of a large project for evaluation of the Thermo-Chemical Accumulator (TCA), a technology under development by the Swedish company ClimateWell AB. The studies concentrate on the use of the technology for comfort cooling. This report concentrates on measurements in the laboratory, modelling and system simulation. The TCA is a three-phase absorption heat pump that stores energy in the form of crystallised salt, in this case Lithium Chloride (LiCl) with water being the other substance. The process requires vacuum conditions as with standard absorption chillers using LiBr/water. Measurements were carried out in the laboratories at the Solar Energy Research Center SERC, at Högskolan Dalarna as well as at ClimateWell AB. The measurements at SERC were performed on a prototype version 7:1 and showed that this prototype had several problems resulting in poor and unreliable performance. The main results were that: there was significant corrosion leading to non-condensable gases that in turn caused very poor performance; unwanted crystallisation caused blockages as well as inconsistent behaviour; poor wetting of the heat exchangers resulted in relatively high temperature drops there. A measured thermal COP for cooling of 0.46 was found, which is significantly lower than the theoretical value. These findings resulted in a thorough redesign for the new prototype, called ClimateWell 10 (CW10), which was tested briefly by the authors at ClimateWell. The data collected here was not large, but enough to show that the machine worked consistently with no noticeable vacuum problems. It was also sufficient for identifying the main parameters in a simulation model developed for the TRNSYS simulation environment, but not enough to verify the model properly. This model was shown to be able to simulate the dynamic as well as static performance of the CW10, and was then used in a series of system simulations. A single system model was developed as the basis of the system simulations, consisting of a CW10 machine, 30 m2 flat plate solar collectors with backup boiler and an office with a design cooling load in Stockholm of 50 W/m2, resulting in a 7.5 kW design load for the 150 m2 floor area. Two base cases were defined based on this: one for Stockholm using a dry cooler with design cooling rate of 30 kW; one for Madrid with a cooling tower with design cooling rate of 34 kW. A number of parametric studies were performed based on these two base cases. These showed that the temperature lift is a limiting factor for cooling for higher ambient temperatures and for charging with fixed temperature source such as district heating. The simulated evacuated tube collector performs only marginally better than a good flat plate collector if considering the gross area, the margin being greater for larger solar fractions. For 30 m2 collector a solar faction of 49% and 67% were achieved for the Stockholm and Madrid base cases respectively. The average annual efficiency of the collector in Stockholm (12%) was much lower than that in Madrid (19%). The thermal COP was simulated to be approximately 0.70, but has not been possible to verify with measured data. The annual electrical COP was shown to be very dependent on the cooling load as a large proportion of electrical use is for components that are permanently on. For the cooling loads studied, the annual electrical COP ranged from 2.2 for a 2000 kWh cooling load to 18.0 for a 21000 kWh cooling load. There is however a potential to reduce the electricity consumption in the machine, which would improve these figures significantly. It was shown that a cooling tower is necessary for the Madrid climate, whereas a dry cooler is sufficient for Stockholm although a cooling tower does improve performance. The simulation study was very shallow and has shown a number of areas that are important to study in more depth. One such area is advanced control strategy, which is necessary to mitigate the weakness of the technology (low temperature lift for cooling) and to optimally use its strength (storage).

Parabolic dish reflectors for solar applications approximated by simple surfaces

Two different concentrating mirrors have been constructed that resemble parabolic dish reflectors. Both mirrors are made of slightly curved strips of flat, bendable material. The strips of the most simplified mirror have only large-radius circles and straight lines as boundaries. The necessary equations for making the mirrors have been derived. Also a simple way to make a stiff, lightweight frame and support for the mirror strips has been developed. Models of the mirrors have been built and successfully used for cooking and baking.This report is an extended version of a paper to be published in Solar Energy that contains complete derivations of all mirror design equations.

Thermal Performance of a Solarus CPC-Thermal Collector

The  aim  of  this  master  thesis  is  an  investigation  of  the  thermal  performance  of  a  thermal compound parabolic concentrating (CPC) collector from Solarus. The collector consists of two troughs with absorbers which are coated with different types of paint with  unknown  properties.  The  lower  and  upper  trough  of  the  collector  have  been  tested individually. In  order  to  accomplish  the  performance  of  the  two  collectors,  a  thorough  literature  study  in  the  fields  of  CPC  technology,  various  test  methods,  test  standards  for  solar thermal  collectors  as  well  as  the  latest  articles  relating  on  the  subject  were  carried  out. In addition, the set‐up of the thermal test rig was part of the thesis as well. The thermal  performance  was  tested  according  to  the  steady  state  test  method  as  described in the European standard 12975‐2. Furthermore, the thermal performance of  a  conventional  flat  plate  collector  was  carried  out  for  verification  of  the  test  method. The  CPC‐Thermal  collector  from  Solarus  was  tested  in  2013  and  the  results  showed  four  times  higher  values  of  the  heat  loss  coefficient  UL (8.4  W/m²K)  than  what  has been reported for a commercial collector from Solarus. This value was assumed to be too large and it was assumed that the large value was a result of the test method used that time. Therefore, another aim was the comparison of the results achieved in this work with the results from the tests performed in 2013. The results of the thermal performance showed that the optical efficiency of the lower trough of the CPC‐T collector is 77±5% and the corresponding heat loss coefficient UL 4.84±0.20  W/m²K.  The  upper  trough  achieved  an  optical  efficiency  of  75±6  %  and  a  heat loss coefficient UL of 6.45±0.27 W/m²K. The results of the heat loss coefficients  are  valid  for  temperature  intervals  between  20°C  and  80°C.  The  different  absorber paintings have a significant impact on the results, the lower trough performs overall better.  The  results  achieved  in  this  thesis  show  lower  heat  loss  coefficients UL and higher optical efficiencies compared to the results from 2013. 

Influence of hydraulics and control of thermal storage in solar assisted heat pump combisystems

This paper studies the influence of hydraulics and control of thermal storage in systems combined with solar thermal and heat pump for the production of warm water and space heating in dwellings. A reference air source heat pump system with flat plate collectors connected to a combistore was defined and modeled together with the IEA SHC Task 44 / HPP Annex 38 (T44A38) “Solar and Heat Pump Systems” boundary conditions of Strasbourg climate and SFH45 building. Three and four pipe connections as well as use of internal and external heat exchangers for DHW preparation were investigated as well as sensor height for charging of the DHW zone in the store. The temperature in this zone was varied to ensure the same DHW comfort was achieved in all cases. The results show that the four pipe connection results in 9% improvement in SPF compared to three pipe and that the external heat exchanger for DHW preparation leads to a 2% improvement compared to the reference case. Additionally the sensor height for charging the DHW zone of the store should not be too low, otherwise system performance is adversely affected

Differences in muscle activity during hand dexterity tasks between women with arthritis and a healthy reference group

Background. Impaired hand function is common in patients with arthritis and it affects performance of daily activities; thus, hand exercises are recommended. There is little information on the extent to which the disease affects activation of the flexor and extensor muscles during these hand-dexterity tasks. The purpose of this study was to compare muscle activation during such tasks in subjects with arthritis and in a healthy reference group. Methods. Muscle activation was measured in m. extensor digitorium communis (EDC) and in m. flexor carpi radialis (FCR) with surface electromyography (EMG) in women with rheumatoid arthritis (RA, n = 20), hand osteoarthritis (HOA, n = 16) and in a healthy reference group (n = 20) during the performance of four daily activity tasks and four hand exercises. Maximal voluntary isometric contraction (MVIC) was measured to enable intermuscular comparisons, and muscle activation is presented as %MVIC. Results. The arthritis group used a higher %MVIC than the reference group in both FCR and EDC when cutting with a pair of scissors, pulling up a zipper and—for the EDC—also when writing with a pen and using a key (p < 0.02). The exercise “rolling dough with flat hands” required the lowest %MVIC and may be less effective in improving muscle strength. Conclusions. Women with arthritis tend to use higher levels of muscle activation in daily tasks than healthy women, and wrist extensors and flexors appear to be equally affected. It is important that hand training programs reflect real-life situations and focus also on extensor strength.

Novas fases amorfas de carbono produzidas por irradiação iônica de filmes de C/sub 60/, [alfa]-C e [alfa]-C:H

Neste trabalho estuda-se a formação de novas fases de carbono amorfo através da irradiação iônica de filmes de fulereno, a-C e a-C:H polimérico. Os efeitos da irradiação iônica na modificação das propriedades ópticas e mecânicas dos filmes de carbono irradiados são analisados de forma correlacionada com as alterações estruturais a nivel atômico. O estudo envolve tanto a análise dos danos induzidos no fulereno pela irradiação iônica a baixas fluências, correspondendo a baixas densidades de energia depositada, quanto a investigação das propriedades físico-químicas das fases amorfas obtidas após irradiações dos filmes de fulereno, a-C e a-C:H com altas densidades de energia depositada. As propriedades ópticas, mecânicas e estruturais das amostras são analisadas através de técnicas de espectroscopia Raman e infravermelho, espectrofotometria UV-VIS-NIR, microscopias ópticas e de força atômica, nanoindentação e técnicas de análise por feixe de íons, tais como retroespalhamento Rutherford e análises por reação nuclear. As irradiações produzem profundas modificações nas amostras de fulereno, a-C e a-C:H, e por conseqüência significativas alterações em suas propriedades ópticas e mecânicas. Após máximas fluências de irradiação fases amorfas rígidas (com dureza de 14 e 17 GPa) e com baixos gaps ópticos (0,2 e 0,5 eV) são formadas. Estas estruturas não usuais correspondem a arranjos atômicos com 90 a 100% de estados sp2. Em geral fases sp2 são planares e apresentam baixa dureza, como predito pelo modelo de “cluster”. Entretanto, os resultados experimentais mostram que as propriedades elásticas das novas fases formadas são alcançadas através da criação de uma estrutura sp2 tridimensional. A indução de altas distorções angulares, através da irradiação iônica, possibilita a formação de anéis de carbono não hexagonais, tais como pentágonos e heptágonos, permitindo assim a curvatura da estrutura. Utilizando um modelo de contagem de vínculos é feita uma análise comparativa entre a topologia (estrutura geométrica) de ligações C-sp2 e as propriedades nanomecânicas. São comparados os efeitos de estruturas sp2 planares e tridimensionais (aleatórias) no processo de contagem de vínculos e, conseqüentemente, nas propriedades elásticas de cada sistema. Os resultados mostram que as boas propriedades mecânicas das novas fases de carbono formadas seguem as predições do modelo de vínculos para uma rede atômica sp2 tridimensional. A formação de uma fase amorfa dura e 100% sp2 representa uma importante conquista na procura de novas estruturas rígidas de carbono. A síntese da estrutura desordenada sp2 tridimensional e vinculada aqui apresentada é bastante incomum na literatura. O presente trabalho mostra que o processo de não-equilíbrio de deposição de energia durante a irradiação iônica permite a formação de distorções angulares nas ligações sp2-C, possibilitando a criação de estruturas grafíticas tridimensionais.

Visão prospectiva da demanda de aços planos no Brasil

Ao longo da história da humanidade, vários esforços foram feitos na tentativa de prever o futuro. Isto ocorreu como uma forma de antever possíveis situações e também de estabelecer mudanças de objetivos devido às alternativas apresentadas. Inúmeros questionamentos surgiram diante deste processo e inegavelmente estavam centrados no quesito “incerteza” dos eventos. E é exatamente neste contexto que surge a técnica prospectiva, que tem o propósito de analisar as incertezas e refletir sobre as suas alternativas de ação no presente e trata de aprimorar o entendimento de como o futuro pode acontecer. As opções de futuro se materializam através da sua descrição ordenada e consistente, ou seja, através de um cenário que é a delimitação de uma situação futura e da seqüência dos acontecimentos que permitem passar da situação de origem a essa situação futura. Assim, o objetivo desse trabalho é realizar um estudo prospectivo e longo prazo sobre a demanda de aços planos no Brasil, tendo em vista a importância da indústria siderúrgica brasileira e às incertezas a ela relacionadas e utiliza a análise prospectiva na elaboração de cenários passíveis de ocorrência. Portanto, trata, inicialmente, de aspectos conceituais da visão prospectiva e sua evolução histórica, abordando e focalizando a técnica proposta por Michel Godet, porém utilizando o método PROSPEX de Eduardo Marques para a elaboração de cenários da demanda de aços planos no Brasil. Diante disso, foram identificados dois cenários qualitativos contrastantes e posteriormente submetidos a um modelo macroeconômico de projeção, o Projetar_e, que, devidamente calibrado, indicou quantitativamente o nível de diversas variáveis econômicas e o desempenho futuro do Produto Interno Bruto (PIB). Como resultado, concluímos que há uma forte relação de causalidade entre o PIB e o consumo de aços planos e identificamos uma equação de regressão linear que permite a projeção da referida demanda. As conclusões ainda demonstram que os resultados dos cenários quantitativos identificados neste trabalho apresentam diferenças significativas em relação às estimativas efetuadas pelo Instituto Brasileiro de Siderurgia (IBS), cabendo, portanto uma reflexão sobre a plausibilidade da utilização de cenários de caráter projetivos para estudos de longo vii prazo, baseados em dados históricos que simplesmente extrapolam para o futuro a imagem do passado. Finalmente, recomendamos pesquisas adicionais para a formalização da integração de métodos qualitativos com métodos quantitativos de elaboração de cenários e a utilização de estudos prospectivos nas empresas participantes da cadeia de valor que utilizam o aço plano como matéria-prima essencial nos seus processos produtivos.

Gestão de projetos em uma empresa pública: uma prática rumo à flexibilização : discurso ou realidade?

o presente trabalho é um estudo de caso que tem por objetivo avaliar se a implementação da prática empresarial Gestão de Projetos na empresa pública Dataprev - Empresa de Tecnologia e Informações da Previdência Social, avançou rumo à flexibilização organizacional. Demandas do contexto governamental e previdenciário na direção da adoção de modelo de gestão que viesse a privilegiar a flexibilidade organizacional na administração pública contribuíram para que, em junho de 2000, a Dataprev desse início à implementação da prática Gestão de Projetos, visando alavancar e sedimentar gestão orientada a resultados voltados, principalmente, à qualidade e prontidão dos serviços/produtos. o estudo em questão foi realizado por meio de pesquisa bibliográfica, levantamento documental e aplicação de questionário em gerentes patrocinadores e líderes dos projetos cadastrados no Sistema Gestão de Projetos da Empresa, no período de junho de 2000 a julho de 2003. o questionário aplicado abordou seis aspectos considerados críticos para avaliação do nível de maturidade da Gestão de Projetos segundo adaptação ao modelo de maturidade de Harold Kerzner, na direção de uma prática bem sucedida que considera como resultados competitivos prazo, custo e qualidade. Os fatores abordados e que dão sustentação a essa prática são apoio gerencial, cultura, metodologia/processos, tecnologia/ferramenta e capacitação. Considerando que o desempenho dos projetos na Dataprev, no que diz respeito ao cumprimento de prazos, não atingiu patamares elevados, impactando tanto na qualidade, quanto nos custos, e tendo em vista a ocorrência de situações próprias da gestão pública, na qual prevaleceu a descontinuidade administrativa, devido a sucessivas mudanças na direção da Empresa, limitações orçamentárias prejudicando os investimentos necessários, a cultura com predominância de relações hierárquicas e departamentalizadas e a pouca visão estratégica com foco em resultados e alinhamento às necessidades do cliente, pode-se dizer que a Dataprev avançou pouco rumo à flexibilização. Na percepção dos respondentes ao questionário há. evidências de que, quanto ao nível de maturidade, a empresa está saindo da fase embrionária para, agora, iniciar o seu processo de crescimento. Apesar de ter sido inovadora ao elaborar uma metodologia e construir uma ferramenta própria de planejamento, acompanhamento e avaliação dos projetos, não foi suficiente para garantir resultados mais exitosos. Na ausência das condições necessárias para dar sustentação à gestão tais como o necessário comprometimento por parte dos patrocinadores, de cultura voltada para a responsabilização e compartilhamento e investimento na capacitação de seus profissionais, prevaleceu por meio do controle na execução dos projetos, a cultura da nonna e do poder, reforçando posturas próprias do modelo tecnoburocrático. Hoje percebe-se na empresa que essas condições facilitadoras estão mais asseguradas, o que já torna possível a transformação do discurso em realidade e remete a uma reflexão de que Gestão de Projetos e Flexibilização Organizacional são interdependentes e, portanto, devem caminhar juntas para o alcance da eficácia organizacional. Do discurso à realidade. Atualmente a Dataprev encontra-se em processo de mudança implantando escritório de projetos, estrutura horizontalizada em uma das diretorias e construindo o seu Planejamento Estratégico Participativo 2004/2007.

Three applications of the marginal cost of public funds concept

This paper illustrates the use of the marginal cost of public funds concept in three contexts. First, we extend Parry’s (2003) analysis of the efficiency effects excise taxes in the U.K., primarily by incorporating the distortion caused by imperfect competition in the cigarette market and distinguishing between the MCFs for per unit and ad valorem taxes on cigarettes. Our computations show, contrary to the standard result in the literature, that the per unit tax on cigarettes has a slightly lower MCF than the ad valorem tax on cigarettes. Second, we calculate the MCF for a payroll tax in a labour market with involuntary unemployment, using the Shapiro and Stiglitz (1984) efficiency wage model as our framework. Our computations, based on Canadian labour market data, indicate that incorporating the distortion caused by involuntary unemployment raises the MCF by 25 to 50 percent. Third, we derive expressions for the distributionally-weighted MCFs for the exemption level and the marginal tax rate for a “flat tax”, such as the one that has been adopted by the province of Alberta. This allows us to develop a restricted, but tractable, version of the optimal income tax problem. Computations indicate that the optimal marginal tax rate may be quite high, even with relatively modest pro-poor distributional preferences.

Facebook3d

INTRODUCTION With the advent of Web 2.0, social networking websites like Facebook, MySpace and LinkedIn have become hugely popular. According to (Nilsen, 2009), social networking websites have global1 figures of almost 250 millions unique users among the top five2, with the time people spend on those networks increasing 63% between 2007 and 2008. Facebook alone saw a massive growth of 566% in number of minutes in the same period of time. Furthermore their appeal is clear, they enable users to easily form persistent networks of friends with whom they can interact and share content. Users then use those networks to keep in touch with their current friends and to reconnect with old friends. However, online social network services have rapidly evolved into highly complex systems which contain a large amount of personally salient information derived from large networks of friends. Since that information varies from simple links to music, photos and videos, users not only have to deal with the huge amount of data generated by them and their friends but also with the fact that it‟s composed of many different media forms. Users are presented with increasing challenges, especially as the number of friends on Facebook rises. An example of a problem is when a user performs a simple task like finding a specific friend in a group of 100 or more friends. In that case he would most likely have to go through several pages and make several clicks till he finds the one he is looking for. Another example is a user with more than 100 friends in which his friends make a status update or another action per day, resulting in 10 updates per hour to keep up. That is plausible, especially since the change in direction of Facebook to rival with Twitter, by encouraging users to update their status as they do on Twitter. As a result, to better present the web of information connected to a user the use of better visualizations is essential. The visualizations used nowadays on social networking sites haven‟t gone through major changes during their lifetimes. They have added more functionality and gave more tools to their users, but still the core of their visualization hasn‟t changed. The information is still presented in a flat way in lists/groups of text and images which can‟t show the extra connections pieces of information. Those extra connections can give new meaning and insights to the user, allowing him to more easily see if that content is important to him and the information related to it. However showing extra connections of information but still allowing the user to easily navigate through it and get the needed information with a quick glance is difficult. The use of color coding, clusters and shapes becomes then essential to attain that objective. But taking into consideration the advances in computer hardware in the last decade and the software platforms available today, there is the opportunity to take advantage of 3D. That opportunity comes in because we are at a phase were the hardware and the software available is ready for the use of 3D in the web. With the use of the extra dimension brought by 3D, visualizations can be constructed to show the content and its related information to the user at the same screen and in a clear way. Also it would allow a great deal of interactivity. Another opportunity to create better information‟s visualization presents itself in the form of the open APIs, specifically the ones made available by the social networking sites. Those APIs allow any developers to create their own applications or sites taking advantage of the huge amount of information there is on those networks. Specifically to this case, they open the door for the creation of new social network visualizations. Nevertheless, the third dimension is by itself not enough to create a better interface for a social networking website, there are some challenges to overcome. One of those challenges is to make the user understand what the system is doing during the interaction with the user. Even though that is important in 2D visualizations, it becomes essential in 3D due to the extra dimension. To overcome that challenge it‟s necessary the use of the principles of animations defined by the artists at Walt Disney Studios (Johnston, et al., 1995). By applying those principles in the development of the interface, the actions of the system in response to the user inputs became clear and understandable. Furthermore, a user study needs to be performed so the users‟ main goals and motivations, while navigating the social network, are revealed. Their goals and motivations are important in the construction of an interface that reflects the user expectations for the interface, but also helps in the development of appropriate metaphors. Those metaphors have an important role in the interface, because if correctly chosen they help the user understand the elements of the interface instead of making him memorize it. The last challenge is the use of 3D visualization on the web, since there have been several attempts to bring 3D into it, mainly with the various versions of VRML which were destined to failure due to the hardware limitations at the time. However, in the last couple of years there has been a movement to make the necessary tools to finally allow developers to use 3D in a useful way, using X3D or OpenGL but especially flash. This thesis argues that there is a need for a better social network visualization that shows all the dimensions of the information connected to the user and that allows him to move through it. But there are several characteristics the new visualization has to possess in order for it to present a real gain in usability to Facebook‟s users. The first quality is to have the friends at the core of its design, and the second to make use of the metaphor of circles of friends to separate users in groups taking into consideration the order of friendship. To achieve that several methods have to be used, from the use of 3D to get an extra dimension for presenting relevant information, to the use of direct manipulation to make the interface comprehensible, predictable and controllable. Moreover animation has to be use to make all the action on the screen perceptible to the user. Additionally, with the opportunity given by the 3D enabled hardware, the flash platform, through the use of the flash engine Papervision3D and the Facebook platform, all is in place to make the visualization possible. But even though it‟s all in place, there are challenges to overcome like making the system actions in 3D understandable to the user and creating correct metaphors that would allow the user to understand the information and options available to him. This thesis document is divided in six chapters, with Chapter 2 reviewing the literature relevant to the work described in this thesis. In Chapter 3 the design stage that resulted in the application presented in this thesis is described. In Chapter 4, the development stage, describing the architecture and the components that compose the application. In Chapter 5 the usability test process is explained and the results obtained through it are presented and analyzed. To finish, Chapter 6 presents the conclusions that were arrived in this thesis.

Obtenção de óxidos a base de níquel e cobalto para reação de oxidação parcial do metano

Nickel-based catalysts supported on alumina have been widely used in various reactions to obtain synthesis gas or hydrogen. Usually, higher conversion levels are obtained by these catalysts, however, the deactivation by coke formation and sintering of metal particles are still problems to be solved. Several approaches have been employed in order to minimize these problems, among which stands out in recent years the use of additives such as oxides of alkali metals and rare earths. Similarly, the use of methodologies for the synthesis faster, easier, applicable on an industrial scale and to allow control of the microstructural characteristics of these catalysts, can together provide the solution to this problem. In this work, oxides with spinel type structure AB2O4, where A represents divalent cation and B represents trivalent cations are an important class of ceramic materials investigated worldwide in different fields of applications. The nickel cobaltite (NiCo2O4) was oxides of spinel type which has attracted considerable interest due to its applicability in several areas, such as chemical sensors, flat panel displays, optical limiters, electrode materials, pigments, electrocatalysis, electronic ceramics, among others. The catalyst precursor NiCo2O4 was prepared by a new chemical synthesis route using gelatine as directing agent. The polymer resin obtained was calcined at 350°C. The samples were calcined at different temperatures (550, 750 and 950°C) and characterized by X ray diffraction, measurements of specific surface area, temperature programmed reduction and scanning electron microscopy. The materials heat treated at 550 and 750°C were tested in the partial oxidation of methane. The set of techniques revealed, for solid preparations, the presence of the phase of spinel-type structure with the NiCo2O4 NixCo1-xO solid solution. This solid solution was identified by Rietveld refinement at all temperatures of heat treatment. The catalyst precursors calcined at 550 and 750°C showed conversion levels around 25 and 75%, respectively. The reason H2/CO was around 2 to the precursor treated at 750°C, proposed reason for the reaction of partial oxidation of methane, one can conclude that this material can be shown to produce synthesis gas suitable for use in the synthesis Fischer-Tropsch process

Estudo morfológico da blenda polimérica poli(metacrilato de metila)/poli(tereftalato de etileno) reciclado (PMMA/PET)

Among the options for plastics modification more convenient, both from a technical-scientific and economic, is the development of polymer blends by processing in the molten state. This work was divide into two stages, with the aim to study the phase morphology of binary blend PMMA / PET blend and this compatibilized by the addition of the poly(methyl methacrylate-co-glycidyl methacrylate-co-ethyl acrylate) copolymer (MMA-GMA-EA). In the first stage is analyzed the morphology of the blend at a preliminary stage where we used the bottle-grade PET in a Haake torque rheometer and the effect of compatibilizer in this blend was evaluated. In the second stage the blend was processed using the recycled PET in a single screw extruder and subsequently injection molding in the shape of specimens for mechanical tests. In both stages we used a transmission electron microscopy (TEM) to observe the morphologies of the samples and an image analyzer to characterize them. In the second stage, as well as analysis by TEM, tensile test, scanning electron microscopy (SEM) and atomic force microscopy (AFM) was performed to correlate the morphology with the mechanical properties. The samples used in morphological analyzes were sliced by cryo-ultramicrotomy technique for the analysis by TEM and the analysis by SEM and AFM, we used the flat face of the block after cut cryogenic. It was found that the size of the dispersed phase decreased with the addition of MMA-GMA-EA in blends prepared in a Haake. In the tensile test, the values of maximum tensile strength and modulus of elasticity is maintained in a range between the value of pure PMMA the pure PET, while the elongation at break was influenced by the composition by weight of the PMMA mixture. The coupling agent corroborated the results presented in the blend PMMA / PETrec / MMA-GMA-EA (80/15/5 %w/w), obtained by TEM, AFM and SEM. It was concluded that the techniques used had a good morphologic correlation, and can be confirmed for final analysis of the morphological characteristics of the blends PMMA / PET