GESTÃO DO CONHECIMENTO TÁCITO: ESTUDO DE CASOS MÚLTIPLOS NA ÁREA DE DESENVOLVIMENTO DE PRODUTOS DE EMPRESAS DO SETOR AUTOMOBILÍSTICO DO ABC PAULISTA

O presente estudo buscou a compreensão dos motivos que levam as empresas pesquisadas do setor automobilístico a gerir o conhecimento tácito, mediados pela gestão do conhecimento, na área de gestão de desenvolvimento de produtos. As questões de pesquisa que este estudo objetivou responder foram: Como empresas estudadas utilizam o conhecimento tácito para se tornarem mais eficientes e eficazes nas atividades/ operações? De que forma o conhecimento tácito é percebido na organização por parte dos funcionários e gestores? Para responder a estas perguntas houve a investigação de duas empresas do setor automobilístico, na área de desenvolvimento de produtos. Como base teórica para o desenvolvimento do presente estudo autores como Davenport e Prusak (1998), Nonaka e Takeuchi (1997) e Choo (2006) orientam esta pesquisa. A pesquisa abrange duas empresas do ramo automobilístico na região do ABC Paulista, com equivalência no número de funcionários e porte. Dentre os entrevistados há funcionários e gestores de áreas de gestão de projetos e produtos. A metodologia aplicada ao estudo foi de caráter qualitativo por meio de pesquisa exploratória-descritiva, sendo que o método de coleta de dados se deu a partir de entrevistas semiestruturadas. O estudo investigou quais as práticas usadas para a conversão do conhecimento, fatores facilitadores e fatores dificultadores para a conversão do conhecimento e as principais contribuições da aplicação das práticas e iniciativas voltadas gerir o conhecimento tácito, sob a ótica dos gestores e funcionários. Através do presente estudo pode-se verificar que existe a preocupação com a gestão do conhecimento nas empresas estudadas e que há práticas diversas relativas ao conhecimento tácito e que as formas de disseminação deste conhecimento são distintas. Algumas das práticas são os cursos de especialização, brainstorming e lesson learned e conversas informais. Nos fatores facilitadores há a troca de informação entre os pares, reuniões semanais, equipes multidisciplinares/ multifuncionais. Nos fatores dificultadores há a indicação de questões comportamentais, acúmulo de funções e tempo para partilhar informações.

A articulação das ações de propaganda, relações públicas e assessoria de imprensa para uma comunicação mercadológica integrada: análise da integração das ações de relações públicas, assessoria de imprensa e propaganda nos lançamentos de produtos dirigidos às mulheres

O objetivo principal desta dissertação é analisar a comunicação integrada e as especificidades das ferramentas da comunicação mercadológica, mais especificamente as formas de integração entre as ações de relações públicas, assessoria de imprensa e propaganda, para o lançamento de produtos dirigidos às mulheres. Trata-se de uma pesquisa qualitativa e descritiva, que empregou as técnicas de pesquisas bibliográficas e documentais. A partir deste estudo, verificou-se que a possibilidade de integração dessas ferramentas de comunicação mercadológica está uma intrinsecamente relacionada a um objetivo mercadológico e a uma verba de comunicação determinados em um plano estratégico de marketing e que a integração poderá ocorrer a partir da visão articuladora do gestor de comunicação da empresa.(AU)

GESTÃO DO CONHECIMENTO TÁCITO: ESTUDO DE CASOS MÚLTIPLOS NA ÁREA DE DESENVOLVIMENTO DE PRODUTOS DE EMPRESAS DO SETOR AUTOMOBILÍSTICO DO ABC PAULISTA.

O presente estudo buscou a compreensão dos motivos que levam as empresas pesquisadas do setor automobilístico a gerir o conhecimento tácito, mediados pela gestão do conhecimento, na área de gestão de desenvolvimento de produtos. As questões de pesquisa que este estudo objetivou responder foram: Como empresas estudadas utilizam o conhecimento tácito para se tornarem mais eficientes e eficazes nas atividades/ operações? De que forma o conhecimento tácito é percebido na organização por parte dos funcionários e gestores? Para responder a estas perguntas houve a investigação de duas empresas do setor automobilístico, na área de desenvolvimento de produtos. Como base teórica para o desenvolvimento do presente estudo autores como Davenport e Prusak (1998), Nonaka e Takeuchi (1997) e Choo (2006) orientam esta pesquisa. A pesquisa abrange duas empresas do ramo automobilístico na região do ABC Paulista, com equivalência no número de funcionários e porte. Dentre os entrevistados há funcionários e gestores de áreas de gestão de projetos e produtos. A metodologia aplicada ao estudo foi de caráter qualitativo por meio de pesquisa exploratória-descritiva, sendo que o método de coleta de dados se deu a partir de entrevistas semiestruturadas. O estudo investigou quais as práticas usadas para a conversão do conhecimento, fatores facilitadores e fatores dificultadores para a conversão do conhecimento e as principais contribuições da aplicação das práticas e iniciativas voltadas gerir o conhecimento tácito, sob a ótica dos gestores e funcionários. Através do presente estudo pode-se verificar que existe a preocupação com a gestão do conhecimento nas empresas estudadas e que há práticas diversas relativas ao conhecimento tácito e que as formas de disseminação deste conhecimento são distintas. Algumas das práticas são os cursos de especialização, brainstorming e lesson learned e conversas informais. Nos fatores facilitadores há a troca de informação entre os pares, reuniões semanais, equipes multidisciplinares/ multifuncionais. Nos fatores dificultadores há a indicação de questões comportamentais, acúmulo de funções e tempo para partilhar informações.

Prevenção de Infeções em Ambiente Clínico através da Integração de Tecnologia em Bata Cirúrgica Antimicrobiana

O ambiente hospitalar é veículo de grande parte das infeções. Muitas destas infeções são originadas pelos microrganismos multirresistentes requerendo soluções de controlo difíceis e dispendiosas. Em Portugal, dos pacientes admitidos em hospitais, 5 a 10% adquirem infeções agudas que correspondem a cerca de 3 milhões de pacientes/ano. A existência de têxteis com eficiência antimicrobiana no contacto entre o doente e os profissionais de saúde poderia constituir uma barreira à propagação de tais microrganismos, com um relevante impacto na redução da infeção nosocomial. Alguns destes têxteis são descontaminados durante o seu ciclo de higienização (lençóis), outros são eliminados (batas e máscaras), acarretando custos substanciais e elevado impacto ambiental. Neste projeto pretende-se conjugar as necessidades atuais de têxteis hospitalares com alta eficiência antimicrobiana, sendo reutilizáveis e versáteis. Esta conjugação surge da necessidade de obter equipamento de proteção cirúrgica: a bata, a touca e a máscara. Todo este processo de estudo e criação, passa pela inserção da metodologia de design, desde a pesquisa das necessidades até à prototipagem, como também a validação do resultado obtido.

Uma abordagem para evolução e reconciliação de linhas de produtos de software clonadas

Software product line engineering promotes large software reuse by developing a system family that shares a set of developed core features, and enables the selection and customization of a set of variabilities that distinguish each software product family from the others. In order to address the time-to-market, the software industry has been using the clone-and-own technique to create and manage new software products or product lines. Despite its advantages, the clone-and-own approach brings several difficulties for the evolution and reconciliation of the software product lines, especially because of the code conflicts generated by the simultaneous evolution of the original software product line, called Source, and its cloned products, called Target. This thesis proposes an approach to evolve and reconcile cloned products based on mining software repositories and code conflict analysis techniques. The approach provides support to the identification of different kinds of code conflicts – lexical, structural and semantics – that can occur during development task integration – bug correction, enhancements and new use cases – from the original evolved software product line to the cloned product line. We have also conducted an empirical study of characterization of the code conflicts produced during the evolution and merging of two large-scale web information system product lines. The results of our study demonstrate the approach potential to automatically or semi-automatically solve several existing code conflicts thus contributing to reduce the complexity and costs of the reconciliation of cloned software product lines.

Produção do mestrado profissional em ensino de ciências naturais e matemática da UFRN (física e química/2005-2012): papel dos documentos oficiais e características dos produtos educacionais

The importance of the Professionals Master in the field of science education is revealed by the recognition that they provide, to practicing teachers, in particular, training spaces for reflection and application of knowledge. This work appears in the context of the project "Research and training in teaching science and mathematics: a cutout of academic production in the northeast and overview of formative action in basic education" on the Centre for Education program, which main objective was to conduct studies description, analysis and evaluation of the academic production of Postgraduate Programs in Science Teaching of UFRPE, UFRN and UEPB and investigate the contribution of continuing education in stricto sensu level, of graduated teachers to improve the quality of basic education . We sought to examine a cut of academic production PPGECNM / UFRN, taking as reference dissertations of Natural Sciences, finished between the years 2005 and 2012, which have developed and applied educational products for high school students. More specifically we sought to conduct a general characterization of the dissertations analyzed for basic descriptors, to understand if and how the official documents governing the Brazilian education, especially science education, subsidized development of dissertations and identify current trends for science teaching are addressed and which ones are used in preparing the product of dissertations. The survey was based on documentary analysis, a type of qualitative approach in which the documents are objects of study in themselves. The results revealed that most of the work was developed in public schools, on subjects of physics and chemistry. During analytical reading of the text of the dissertations was observed that, in its construction, most of them addressed somehow, official documents governing the Brazilian educational system, that the products are basically teaching units and teaching approaches that are more focused on Experimentation and History and Philosophy of Science

Aplicação do planejamento de experimentos no processo de desenvolvimento de produtos: pesquisa em uma sorveteria artesanal

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES

Diagnóstico da comercialização de produtos da medicina popular em feiras livres do semiárido do Rio Grande do Norte: avaliações socioeconômicas e sanitárias, com proposta de legislação específica

Historically, man has empirically acquired knowledge about the therapeutic applications of extracted elements of the natural environment in which belonged. Such knowledge over time culminated in the formation of traditional health systems. Among its features, the use of bioactive plant species - medicinal plants - stands out for its efficiency and high popular acceptance. Despite its importance for public health, the population still has in the open-air fairs the main source for the acquisition of the species used. In these spaces, the trade generally occurs informally, under unfavorable conditions to the quality of the products and to the financial sustainability of the business. In this context, this study aimed to characterize the socioeconomic, cultural and sanitary aspects related to the trade of medicinal plants in municipalities of a semiarid region of Rio Grande do Norte, and additionally, proposing a specific legislation to the activity. Socioeconomic data were collected through on-site interviews, guided by structured form. The observations about the hygienic and sanitary adequacy of physical facilities and practices employed at the point of sale /environment were conducted and recorded with the use of assessment tool developed for use in open markets. The adequacy of medicinal plants to consumption was determined by microbiological analysis. The activity was carried out by individuals who are aged between 21 and 81 years of age, low educational level and low-income, predominantly males. The data showed a tendency to extinction of the activity in all the districts studied. It was observed in all the fairs studied hygiene and sanitation inadequacies that characterized very high health risk, representing in this way, the high probability of Food Transmitted Diseases outbreaks Such conditions were reflected in the high percentage of inadequacy to the consumption of the analyzed medicinal plants samples, illustrating the potential health risk to consumers. To contribute to the correction of hygiene and sanitation inadequacies observed in the studied open-air fairs, educational interventions were made to the training of traders in Good Practices. As a complement, was drafted a specific legislation for the marketing of folk medicine's products in open-air fairs. Such actions, products and its developments will contribute significantly to improving the quality of products available to the population and the preservation of activity, potentially reducing the risks to public health.

Polpa de jambolão (Eugenia jambolana Lam.) fresca e desidratada: características físico-químicas, bioativas e funcionais, efeitos biológicos em Caenorhabditis elegans e uso para produção de frozen yogurt caprino probiótico

This work evaluated the fresh, spray dried (with 10 % of Arabic Gum) and freeze dried jambolan pulp (Eugenia jambolana Lam.) in regard to physicochemical (pH, moisture, water activity, average particle diameter, solubility and color), bioactive [total phenolic content (TPC), monomeric anthocyanin, pronathocyanidin (PA), total elagic acid (TEA), myricetin and cyanidin] and in vitro functionality (antioxidant, antienzymatic and antimicrobial activities]. In addition, the in vivo functionality of jambolan pulp was investigated using the Caenorhabditis elegans model for insulin signaling, longevity and induced neurodegeneration (Alzheimer’s disease and Parkinson’s disease related symptoms). The dried jambolan pulp presented TPC retention (50% to 75%), PA (90% to 98%), TEA (31% to 83%), myricetin (40% to 84%), cyanidin (72% to 84%) and antioxidant activity (15%). The fresh jambolan pulp, the freeze dried pulp and the spray dried jambolan pulp presented high enzymatic inhibitory activity against pancreatic lipase (4,4 to 5,8 mg/mL), alpha-glycosidase (10,3 to 13,8 mg/mL) and alpha-amylase (8,9 to 11,2 mg/mL). They also were active inhibitors against the pathogen S. aureus. The dried jambolan experimental samples were able to increase the expression of several genes linked to the insulin signaling pathways (SIR-2.1, PPTR-1, DAF-16, SOD-3, e CTL) and increased the lifespan in C. elegans (18,07 % - 24,34 %), besides decreasing the amyloid AB1-42 aggregation induced paralysis and MPP+ (1-methyl-4-phenylpyridinium) induced neurodegeneration. Based on that, the jambolan pulp and the spray dried jambolan pulp were further selected for the production of caprine frozen yogurt with the addition of Bifidobacterium animalis subsp. lactis BI-07. The final product were evaluated in regard to their physicochemical (pH, acidity, total solids, protein, total reducing sugars, fat, ashes, overrun, melting test), bioactive (TPC and monomeric anthocyanin, antioxidant activity, probiotic viability and sensory analysis (sensory acceptance). The results showed that samples with probiotic had lowest pH and higher acidity, TPC, anthocyanin and antioxidant activity. It was also observed low overrun (14.2% to 22.6%). vi Samples with probiotic had lower flavor scores. Overall, this research presents the jambolan as a highly functional bioactive-rich fruit with the potential to modulate important biological pathways, extend lifespan and retard the development of neurodegenerative diseases. Jambolan is an underexploited exotic fruit with a high colorant potential and this thesis shows for the first time in the literature important technological, biological and scientific data about this fruit that could be used towards the development of health-oriented food products.

Efeito imunomodulador e atividade antimicrobiana de heterofucanas de Sargassum filipendula

Fucans, sulphated polysaccharides that contain L-fucose in its constitution, obtained from species of Phaeophyceae of the Sargassum kind, display several biological activities. Heterofucans from Sargassum filipendula are bioactive molecules that contain strong antiproliferative and antioxidant activity. However, their immunomodulatory and antimicrobial activities have not yet been examined. In this context, the aim of this research was to evaluate the heterofucans as for their immunomodulatory capacity and antimicrobial action against Leishmania infantum, Trichomonas vaginalis, Staphylococcus epidermidis and Klebsiella pneumonia (KPC). The five heterofucans obtained from S. filipendula show activities that are distant as stimulants of the immune system and microbial agent. The SF0.5V, SF0.7V amd SF1.0V heterofucans were capable of acting in the activation of murine and human macrophages. In addition to that, SF0.5V has shown antibiofilm activity of S. epidermides and SF0.7V and 1.0V almost completely inhibited the survival of the protozoan T. vaginalis. Results such as this one, reflect the broad range of action of the sulphated polysaccharides obtained from seaweeds, especially from the species S.filipendula

Desenvolvimento de um painel sanduíche com carga de particulado oriundo de resíduo lignocelulósico para aplicação em produtos na área de equipamentos de proteção

This work aims to study and investigate the use of a hybrid composite polymer formed with blanket aramid (Kevlar 29) fiber blanket flax fiber and particulate dry endocarp of coconut (Cocos nucifera Linn), using as matrix an epoxy resin based thermoset for use in areas of protective equipment. Besides such material is used an aluminum plate, joined to the composite by means of glue based on epoxy and araldite commercial. The manufacturing process adopted was manual lamination (Hand Lay Up) to manufacture the hybrid composite. After the composite is prepared, an aluminum plate is subjected to pressure and glued to cure the adhesive. Layers of veil will also be used to separate the particulate from the linen blanket layer without disturbing the alignment of the fibers of the blankets. To characterize the mechanical and physical behavior was manufactured a plate of 800 x 600 mm of the hybrid composite, which were removed specimens for tests of water absorption to saturation; density; impact test (Charpy) and two test specimens for ballistic testing 220 mm x 200 mm to make a comparative study between the dry state and saturated water absorption and thus see the ballistic performance of these two conditions. The test was applied to make a comparative study of fracture in these two conditions, caused by penetrating ballistic missile (38 and 380). To test the impact (Charpy) will analyze the absorbed energy, fracture appearance and lateral contraction, also in dry condition and saturation of absorbed water, thereby analyzing situations where the impact load is relevant, such as bumps and shocks produced by stone, metal or wooden bars among others. The proposed configuration, along with the tests, has the purpose, application in the fields of equipment against ballistic impact, such as helmets; bullet proof vests; shields; protective packaging and other items to be identified in this research.

Avaliação da atividade antimicrobiana das defensinas recombinantes de ervilha (drr230a) e café (cd1) produzidas em Pichia pastoris

The inefficiency of chemical pesticides to control phytopathogenic fungi in agriculture and the frequent incidence of human diseases caused by bacteria which are resistant to antibiotics lead to the search for alternative antimicrobial compounds. In this context, plant defensins are a promising tool for the control of both plant and human pathogenic agents. Plant defensins are cationic peptides of about 50 amino acid residues, rich in cysteine and whose tridimensional structure is considerably conserved among different plant species. These antimicrobial molecules represent an important innate component from plant defense response against pathogens and are expressed in various plant tissues, such as leaves, tubers, flowers, pods and seeds. The present work aimed at the evaluation of the antimicrobial activity of two plant defensins against different phytopathogenic fungi and pathogenic bacteria to humans. The defensin Drr230a, whose gene was isolated from pea (Pisum sativum), and the defensin CD1,whose gene was identified within coffee (Coffea arabica) transcriptome, were subcloned in yeast expression vector and expressed in Pichia pastoris. The gene cd1 was subcloned as two different recombinant forms: CD1tC, containing a six-histidine sequence (6xHis) at the peptide C-terminal region and CD1tN, containing 6xHis coding sequence at the N-terminal region. In the case of the defensin Drr230a, the 6xHis coding sequence was inserted only at the N-terminal region. Assays of the antimicrobial activity of the purified recombinant proteins rDrr230a and rCD1 against Phakopsora pachyrhizi, causal agent of soybean Asian rust, were performed to analyze the in vitro spore germination inhibition and disease severity caused by the fungus in planta. Both recombinant defensins were able to inhibit P. pachyrhizi uredospore germination, with no difference between the antimicrobial action of either CD1tC or CD1tN. Moreover, rDrr230a and rCD1 drastically reduced severity of soybean Asian rust, as demonstrated by in planta assays. In spite of the fact that rCD1 was not able to inhibit proliferation of the human pathogenic bacteria Staplylococcus aureus and Klebsiella pneumoniae, rCD1 was able to inhibit growth of the phytopathogenic fungus Fusarium tucumaniae, that causes soybean sudden death syndrome. The obtained results show that these plant defensins are useful candidates to be used in plant genetic engineering programs to control agriculture impacting fungal diseases.

Avaliação da potencialidade de incorporação de um lodo de uma indústria de produtos de limpeza como adição mineral em concretos de cimento Portland

The generation of industrial wastes has been increased more and more in recent decades, motivating studies about a correct sustainable allocation and that also represents advantages for their generators. In this context, are included two companies of cleaning products niche, located in São José do Mipibu/RN, that produces industrial sludge at a sewage treatment plant, and that is the main approach of this research. Given this, it was studied the incorporation potentiality of this sludge as a mineral addition in cement matrix for concrete production due it high capacity of wastes immobilization inside this material, which are subsequently used in the company for making precast articles. Were added different sludge concentrations (5, 10, 15 and 20%) in a common trait (1: 2: 3), and evaluated their techniques and microstructural implications via workability test in fresh state and compressive strength, full porosity and scanning electron microscopy (SEM) in the hardened state. The results demonstrated the feasibility of the process both from a technical and environmental view as economical. All concretes produced with residue showed an increase of workability given the nature of the waste that had surfactants substances capable of adsorbing tiny particles of air into the batter. However, for all concentrations were obtained lower compressive resistances than standard concrete, with a reduction of 39% for samples with 20% of sludge. This are attributed mainly to an increase of porosity in the transition zone of these material, resulting from increased formation of ettringite at the detriment to the formation of other compounds, but which still allows the use of these for the manufacture of concrete articles with non-structural nature, such as precast floor. In addition, the water absorption and void ratio increased slightly for all samples, except the concrete with 20% of waste that has a reduction for the last parameter. Given this context, the recommended maximum level is 20%, constituting a significant proportion and able to allocate sustainably all waste generated in the industry.

Desenvolvimento e validação de testes de fluxo lateral para a detecção de cultivares geneticamente modificados e de aflatoxinas em produtos agrícolas

The expansion of cultivated areas with genetically modified crops (GM) is a worldwide phenomenon, stimulating regulatory authorities to implement strict procedures to monitor and verify the presence of GM varieties in agricultural crops. With the constant growing of plant cultivating areas all over the world, consumption of aflatoxin-contaminated food also increased. Aflatoxins correspond to a class of highly toxic contaminants found in agricultural products that can have harmful effects on human and animal health. Therefore, the safety and quality evaluation of agricultural products are important issues for consumers. Lateral flow tests (strip tests) is a promising method for the detection both proteins expressed in GM crops and aflatoxins-contaminated food samples. The advantages of this technique include its simplicity, rapidity and cost-effective when compared to the conventional methods. In this study, two novel and sensitive strip tests assay were developed for the identification of: (i) Cry1Ac and Cry8Ka5 proteins expressed in GM cotton crops and; (ii) aflatoxins from agricultural products. The first strip test was developed using a sandwhich format, while the second one was developed using a competitive format. Gold colloidal nanoparticles were used as detector reagent when coated with monoclonal antibodies. An anti-species specific antibody was sprayed at the nitrocellulose membrane to be used as a control line. To validate the first strip test, GM (Bollgard I® e Planta 50- EMBRAPA) and non-GM cotton leaf (Cooker 312) were used. The results showed that the strip containing antibodies for the identification of Cry1Ac and Cry8Ka5 proteins was capable of correctly distinguishing between GM samples (positive result) and non-GM samples (negative result), in a high sensitivity manner. To validate the second strip test, artificially contaminated soybean with Aspergillus flavus (aflatoxin-producing fungus) was employed. Food samples, such as milk and soybean, were also evaluated for the presence of aflatoxins. The strip test was capable to distinguish between samples with and without aflatoxins samples, at a sensitivity concentration of 0,5 μg/Kg. Therefore, these results suggest that the strip tests developed in this study can be a potential tool as a rapid and cost-effective method for detection of insect resistant GM crops expressing Cry1Ac and Cry8Ka5 and aflatoxins from food samples.

Desenvolvimento e validação de testes de fluxo lateral para a detecção de cultivares geneticamente modificados e de aflatoxinas em produtos agrícolas

The expansion of cultivated areas with genetically modified crops (GM) is a worldwide phenomenon, stimulating regulatory authorities to implement strict procedures to monitor and verify the presence of GM varieties in agricultural crops. With the constant growing of plant cultivating areas all over the world, consumption of aflatoxin-contaminated food also increased. Aflatoxins correspond to a class of highly toxic contaminants found in agricultural products that can have harmful effects on human and animal health. Therefore, the safety and quality evaluation of agricultural products are important issues for consumers. Lateral flow tests (strip tests) is a promising method for the detection both proteins expressed in GM crops and aflatoxins-contaminated food samples. The advantages of this technique include its simplicity, rapidity and cost-effective when compared to the conventional methods. In this study, two novel and sensitive strip tests assay were developed for the identification of: (i) Cry1Ac and Cry8Ka5 proteins expressed in GM cotton crops and; (ii) aflatoxins from agricultural products. The first strip test was developed using a sandwhich format, while the second one was developed using a competitive format. Gold colloidal nanoparticles were used as detector reagent when coated with monoclonal antibodies. An anti-species specific antibody was sprayed at the nitrocellulose membrane to be used as a control line. To validate the first strip test, GM (Bollgard I® e Planta 50- EMBRAPA) and non-GM cotton leaf (Cooker 312) were used. The results showed that the strip containing antibodies for the identification of Cry1Ac and Cry8Ka5 proteins was capable of correctly distinguishing between GM samples (positive result) and non-GM samples (negative result), in a high sensitivity manner. To validate the second strip test, artificially contaminated soybean with Aspergillus flavus (aflatoxin-producing fungus) was employed. Food samples, such as milk and soybean, were also evaluated for the presence of aflatoxins. The strip test was capable to distinguish between samples with and without aflatoxins samples, at a sensitivity concentration of 0,5 μg/Kg. Therefore, these results suggest that the strip tests developed in this study can be a potential tool as a rapid and cost-effective method for detection of insect resistant GM crops expressing Cry1Ac and Cry8Ka5 and aflatoxins from food samples.