Electrodynamic tether applications and constraints

Propulsion and power generation by bare electrodynamic tethers are revisited in a unified way and issues and constraints are addressed. In comparing electrodynamic tethers, which do not use propellant, with other propellantconsuming systems, mission duration is a discriminator that defines crossover points for systems with equal initial masses. Bare tethers operating in low Earth orbit can be more competitive than optimum ion thrusters in missions exceeding two-three days for orbital deboost and three weeks for boosting operations. If the tether produces useful onboard power during deboost, the crossover point reaches to about 10 days. Power generation by means of a bare electrodynamic tether in combination with chemical propulsion to maintain orbital altitude of the system is more efficient than use of the same chemicals (liquid hydrogen and liquid oxygen) in a fuel cell to produce power for missions longer than one week. Issues associated with tether temperature, bowing, deployment, and arcing are also discussed. Heating/cooling rates reach about 4 K/s for a 0.05-mm-thick tape and a fraction of Kelvin/second for the ProSEDS (0.6-mm-radius) wire; under dominant ohmic effects, temperatures areover200K (night) and 380 K (day) for the tape and 320 and 415 K for that wire. Tether applications other than propulsion and power are briefly discussed.

Large scale multiphysics modeling of neurites

Situado en el límite entre Ingeniería, Informática y Biología, la mecánica computacional de las neuronas aparece como un nuevo campo interdisciplinar que potencialmente puede ser capaz de abordar problemas clínicos desde una perspectiva diferente. Este campo es multiescala por naturaleza, yendo desde la nanoescala (como, por ejemplo, los dímeros de tubulina) a la macroescala (como, por ejemplo, el tejido cerebral), y tiene como objetivo abordar problemas que son complejos, y algunas veces imposibles, de estudiar con medios experimentales. La modelización computacional ha sido ampliamente empleada en aplicaciones Neurocientíficas tan diversas como el crecimiento neuronal o la propagación de los potenciales de acción compuestos. Sin embargo, en la mayoría de los enfoques de modelización hechos hasta ahora, la interacción entre la célula y el medio/estímulo que la rodea ha sido muy poco explorada. A pesar de la tremenda importancia de esa relación en algunos desafíos médicos—como, por ejemplo, lesiones traumáticas en el cerebro, cáncer, la enfermedad del Alzheimer—un puente que relacione las propiedades electrofisiológicas-químicas y mecánicas desde la escala molecular al nivel celular todavía no existe. Con ese objetivo, esta investigación propone un marco computacional multiescala particularizado para dos escenarios respresentativos: el crecimiento del axón y el acomplamiento electrofisiológicomecánico de las neuritas. En el primer caso, se explora la relación entre los constituyentes moleculares del axón durante su crecimiento y sus propiedades mecánicas resultantes, mientras que en el último, un estímulo mecánico provoca deficiencias funcionales a nivel celular como consecuencia de sus alteraciones electrofisiológicas-químicas. La modelización computacional empleada en este trabajo es el método de las diferencias finitas, y es implementada en un nuevo programa llamado Neurite. Aunque el método de los elementos finitos es también explorado en parte de esta investigación, el método de las diferencias finitas tiene la flexibilidad y versatilidad necesaria para implementar mode los biológicos, así como la simplicidad matemática para extenderlos a simulaciones a gran escala con un coste computacional bajo. Centrándose primero en el efecto de las propiedades electrofisiológicas-químicas sobre las propiedades mecánicas, una versión adaptada de Neurite es desarrollada para simular la polimerización de los microtúbulos en el crecimiento del axón y proporcionar las propiedades mecánicas como función de la ocupación de los microtúbulos. Después de calibrar el modelo de crecimiento del axón frente a resultados experimentales disponibles en la literatura, las características mecánicas pueden ser evaluadas durante la simulación. Las propiedades mecánicas del axón muestran variaciones dramáticas en la punta de éste, donde el cono de crecimiento soporta las señales químicas y mecánicas. Bansándose en el conocimiento ganado con el modelo de diferencias finitas, y con el objetivo de ir de 1D a 3D, este esquema preliminar pero de una naturaleza innovadora allana el camino a futuros estudios con el método de los elementos finitos. Centrándose finalmente en el efecto de las propiedades mecánicas sobre las propiedades electrofisiológicas- químicas, Neurite es empleado para relacionar las cargas mecánicas macroscópicas con las deformaciones y velocidades de deformación a escala microscópica, y simular la propagación de la señal eléctrica en las neuritas bajo carga mecánica. Las simulaciones fueron calibradas con resultados experimentales publicados en la literatura, proporcionando, por tanto, un modelo capaz de predecir las alteraciones de las funciones electrofisiológicas neuronales bajo cargas externas dañinas, y uniendo lesiones mecánicas con las correspondientes deficiencias funcionales. Para abordar simulaciones a gran escala, aunque otras arquitecturas avanzadas basadas en muchos núcleos integrados (MICs) fueron consideradas, los solvers explícito e implícito se implementaron en unidades de procesamiento central (CPU) y unidades de procesamiento gráfico (GPUs). Estudios de escalabilidad fueron llevados acabo para ambas implementaciones mostrando resultados prometedores para casos de simulaciones extremadamente grandes con GPUs. Esta tesis abre la vía para futuros modelos mecánicos con el objetivo de unir las propiedades electrofisiológicas-químicas con las propiedades mecánicas. El objetivo general es mejorar el conocimiento de las comunidades médicas y de bioingeniería sobre la mecánica de las neuronas y las deficiencias funcionales que aparecen de los daños producidos por traumatismos mecánicos, como lesiones traumáticas en el cerebro, o enfermedades neurodegenerativas como la enfermedad del Alzheimer. ABSTRACT Sitting at the interface between Engineering, Computer Science and Biology, Computational Neuron Mechanics appears as a new interdisciplinary field potentially able to tackle clinical problems from a new perspective. This field is multiscale by nature, ranging from the nanoscale (e.g., tubulin dimers) to the macroscale (e.g., brain tissue), and aims at tackling problems that are complex, and sometime impossible, to study through experimental means. Computational modeling has been widely used in different Neuroscience applications as diverse as neuronal growth or compound action potential propagation. However, in the majority of the modeling approaches done in this field to date, the interactions between the cell and its surrounding media/stimulus have been rarely explored. Despite of the tremendous importance of such relationship in several medical challenges—e.g., traumatic brain injury (TBI), cancer, Alzheimer’s disease (AD)—a bridge between electrophysiological-chemical and mechanical properties of neurons from the molecular scale to the cell level is still lacking. To this end, this research proposes a multiscale computational framework particularized for two representative scenarios: axon growth and electrophysiological-mechanical coupling of neurites. In the former case, the relation between the molecular constituents of the axon during its growth and its resulting mechanical properties is explored, whereas in the latter, a mechanical stimulus provokes functional deficits at cell level as a consequence of its electrophysiological-chemical alterations. The computational modeling approach chosen in this work is the finite difference method (FDM), and was implemented in a new program called Neurite. Although the finite element method (FEM) is also explored as part of this research, the FDM provides the necessary flexibility and versatility to implement biological models, as well as the mathematical simplicity to extend them to large scale simulations with a low computational cost. Focusing first on the effect of electrophysiological-chemical properties on the mechanical proper ties, an adaptation of Neurite was developed to simulate microtubule polymerization in axonal growth and provide the axon mechanical properties as a function of microtubule occupancy. After calibrating the axon growth model against experimental results available in the literature, the mechanical characteristics can be tracked during the simulation. The axon mechanical properties show dramatic variations at the tip of the axon, where the growth cone supports the chemical and mechanical signaling. Based on the knowledge gained from the FDM scheme, and in order to go from 1D to 3D, this preliminary yet novel scheme paves the road for future studies with FEM. Focusing then on the effect of mechanical properties on the electrophysiological-chemical properties, Neurite was used to relate macroscopic mechanical loading to microscopic strains and strain rates, and simulate the electrical signal propagation along neurites under mechanical loading. The simulations were calibrated against experimental results published in the literature, thus providing a model able to predict the alteration of neuronal electrophysiological function under external damaging load, and linking mechanical injuries to subsequent acute functional deficits. To undertake large scale simulations, although other state-of-the-art architectures based on many integrated cores (MICs) were considered, the explicit and implicit solvers were implemented for central processing units (CPUs) and graphics processing units (GPUs). Scalability studies were done for both implementations showing promising results for extremely large scale simulations with GPUs. This thesis opens the avenue for future mechanical modeling approaches aimed at linking electrophysiological- chemical properties to mechanical properties. Its overarching goal is to enhance the bioengineering and medical communities knowledge on neuronal mechanics and functional deficits arising from damages produced by direct mechanical insults, such as TBI, or neurodegenerative evolving illness, such as AD.

Effects of radiation losses on very lean methane/air flames propagating upward in a vertical tube

The stationary upward propagation of a very lean methane/air flame in a long vertical tube open at the bottom and closed at the top is simulated numerically using a single overall chemical reaction to model combustion and assuming an optically thin gas and a transparent or non-reflecting tube wall to approximately account for radiation losses from CO2CO2 and H2OH2O. Buoyancy plays a dominant role in the propagation of these flames and causes a large region of low velocity of the burnt gas relative to the flame to appear below the flame front when the equivalence ratio is decreased. The size of this region scales with the radius of the tube, and its presence enhances the effect of radiation losses, which would be otherwise negligible for a standard flammability tube, given the small concentration of radiating species. Heat conduction is found to be important in the low velocity region and to lead to a conduction flux from the flame to the burnt gas that causes extinction at the flame tip for a value of the equivalence ratio near the flammability limit experimentally measured in the standard tube. The effect of radiation losses decreases with the radius of the tube. Numerical results and order-of-magnitude estimates show that, in the absence of radiation, a very lean flame front fails to propagate only after recirculation of the burnt gas extends to its reaction region and drastically changes its structure. This condition is not realized for the standard flammability tube, but it seems to account for the flammability limit measured in a tube of about half the radius of the standard tube.

New aspects and strategies for methane mitigation from ruminants

The growing demand for sustainable animal production is compelling researchers to explore the potential approaches to reduce emissions of greenhouse gases from livestock that are mainly produced by enteric fermentation. Some potential solutions, for instance, the use of chemical inhibitors to reduce methanogenesis, are not feasible in routine use due to their toxicity to ruminants, inhibition of efficient rumen function or other transitory effects. Strategies, such as use of plant secondary metabolites and dietary manipulations have emerged to reduce the methane emission, but these still require extensive research before these can be recommended and deployed in the livestock industry sector. Furthermore, immunization vaccines for methanogens and phages are also under investigation for mitigation of enteric methanogenesis. The increasing knowledge of methanogenic diversity in rumen, DNA sequencing technologies and bioinformatics have paved the way for chemogenomic strategies by targeting methane producers. Chemogenomics will help in finding target enzymes and proteins, which will further assist in the screening of natural as well chemical inhibitors. The construction of a methanogenic gene catalogue through these approaches is an attainable objective. This will lead to understand the microbiome function, its relation with the host and feeds, and therefore, will form the basis of practically viable and eco-friendly methane mitigation approaches, while improving the ruminant productivity.

Customer Relationship Management-PeopleSoft CRM

1 RESUMEN 1.1 Resumen (español) El intercambio y comercio tanto de bienes como servicios se remonta a tiempos inmemoriales dentro de la historia de la humanidad. Desde sus inicios tempranos con el intercambio o trueque de productos en el Neolítico hasta nuestra época híper globalizada, en la que existen clientes potenciales en el otro extremo del mundo, podemos decir que se ha recorrido un largo camino. Con el paso del tiempo y la evolución de la sociedad y la tecnología, así como la evolución empresarial, se ha visto necesario la implementación de estrategias para lograr la fidelización y satisfacción de los clientes. De esta forma entendimos que ya no valía simplemente con vender un producto a un cliente, si no que si queríamos establecer una relación continúa con el mismo, debíamos lograr su satisfacción y por tanto su fidelización. Como forma de extender la relación más allá de una simple venta, las empresas modernas empezaron a implementar diversas estrategias. De esta forma aparecieron los primeros centros de atención al cliente, las primeras aplicaciones hechas a medida para dar soporte a los clientes y por fin los sistemas CRM tal y como los concebimos hoy día. El presente proyecto fin de carrera da una explicación de dichos sistemas indicando cuáles son sus objetos fundamentales y cómo implementan la estrategia CRM y profundiza en uno de los sistemas CRM más utilizados: PeopleSoft CRM, dando una explicación detallada de dicho sistemas así como de los conceptos y lenguaje de programación de dicho sistema CRM. 1.2 SUMMARY (ENGLISH) The exchange and trade of goods as well and services goes back to ancient times in the history of mankind. Since its early beginning with the bartering of products in the Neolithic to our globalized hyper era, in which there are potential customers on the other side of the world, we can say that it has come a long way. After a certain length of time, the society and technology evolution, and also the enterprise development, has been necessary to implement strategies to achieve customer loyalty and satisfaction. We understood in this way that it no longer simply worth to sell a product to a customer, otherwise if we wanted to establish a relationship continues with the same, we should ensure their satisfaction and thus their loyalty. As a way to extend the relationship beyond a simple sale, modern enterprises began to implement several strategies. Therefore appeared the first customer service centers, the first applications tailored to support customers and finally the CRM systems as we know it today. This final project gives an explanation of such systems by indicating what the core objects are and how to implement the CRM strategy, deeping into one of the most widely used CRM systems: PeopleSoft CRM, and also giving a detailed explanation of this system and its programming language.

Estudio de la fisuración en particiones verticales de yeso laminado, producidas por la deformación de forjados

Las exigencias de calidad, tanto en el ámbito de la rehabilitación como en el de las obras de nueva planta, obligan a evitar la fisuración de la tabiquería. Una de sus principales causas es la deformación excesiva de los forjados. Aunque en la mayoría de los casos no tiene efectos estructurales sino solamente estéticos, es necesario tomar precauciones para evitar la fisuración, pues es una de las patologías más frecuentes y en muchos casos motivo de reclamación de los usuarios. El aumento del consumo de los paneles de placa de yeso laminado y lana de roca para la realización de tabiquerías, justifica la necesidad de ahondar en el conocimiento del comportamiento y del mecanismo de fisuración de este material, pues hasta la fecha no se ha encontrado ningún trabajo especificamente dedicado al estudio del comportamiento en fractura de paneles sandwich de placa de yeso laminado y lana de roca en su plano. A la hora de abordar el estudio del comportamiento en fractura del material objeto de esta tesis, es preciso tener en cuenta que se trata de un material compuesto y, como tal, sus propiedades mecánicas y resistentes dependen en gran medida de las de sus componentes. Por tanto, para poder explicar el comportamiento en fractura del panel sandwich, habrá que estudiar también el de sus componentes. Por otro lado, se considera también muy útil disponer de una herramienta de calculo para la simulación de la fractura de paneles sandwich que sea predictiva. Este modelo hará posible facilitar el diseño de tabiquerías que no se fisure con este material, al poder relacionar las flechas que pueden tomar los forjados con su potencial fisuración. Para contrastar y validar un modelo de este tipo, es necesario disponer de suficientes datos experimentales del comportamiento en fractura del panel sandwich de placa de yeso laminado y lana de roca, que se puedan simular numericamente con el mismo. A partir de lo anteriormente expuesto se plantea, en primer lugar, una campaña experimental con el fin de obtener los parámetros necesarios para caracterizar el comportamiento en fractura de los paneles sandwich y sus componentes: placa de yeso laminado y lana de roca, estudiando también, su comportamiento en fractura en Modo Mixto, y el efecto del tamaño en los parámetros del panel. Por otro lado se propone un modelo de cálculo para la simulación de la fractura en Modo Mixto de paneles sandwich de placa de yeso laminado y lana de roca, comprobando la validez del modelo numérico a partir de los resultados experimentales obtenidos en la campaña de ensayos. Finalmente, se aplica el modelo para estudiar la fisuración de tabiquería realizada con el panel sandwich producida por la deformación de forjados unidireccionales realizados con viguetas de hormigón y bovedilla cerámica, por ser esta tipología la más usual en obras de edificación de viviendas. The quality requirements in terms of rehabilitation and new Works, force to prevent cracking on partitions and one of the main causes is the excessive deformation of the floor. In most of the cases, there are any structural damages, only aesthetic effects, but it is necessary to take precautions to avoid cracking because it is one of the most common diseases and in addition is the main reason of user’s complaints. The increased consumption of plasterboard panels and mineral wool used to build partitions, justifies the need to develop a deeper understanding of the cracking behaviour and mechanism, because by now, any specifically work dedicated to the study of fractures behaviour of sandwich plasterboard panels and rock wool has been found. When approaching the study of the fracture behaviour of the material it must bear in mind that we are referring to a composite material and as such, its mechanical and strength properties depend heavily on its components. Therefore, to explain the fracture behaviour of sandwich panels its components must be studied as well. On the other hand, it is also considered very useful to have a calculation tool to simulate the more likely fractures of the sandwich panel in order to predict it. This model used to perform simulations will enable the design of partitions built with these materials without cracks because it will relate the deflections in decks with its potential cracking. To contrast and validate this type of model, it is necessary and imperative to have enough experimental data of the sandwich plasterboard and rock wool fractures in order to enable its numerical simulation with it. On the basis of the above, the question arises firstly an experimental campaign in order to obtain the necessary parameters to characterize the cracking behaviour of sandwich panels and its components: plasterboard and rock wool, studying also its cracking behaviour in a mixed mode fracture and the effect of size parameters of the panel. Furthermore, a calculation model to simulate fractures in mixed mode of the sandwich panels made of plasterboard and rock wool is proposed in order to check the validity of the numerical model, based on experimental results obtained from the test campaign. Finally, this model is applied to study cracking on partitions built with sandwich panels resulting from the unidirectional floor’s deformations built with prestressed concrete beams and slab pottery pieces being this typology the most common one on residential buildings works.

Control of insect vectors and plant viruses in protected crops by novel pyrethroid-treated nets

Long-lasting insecticide-treated nets (LLITNs) constitute a novel alternative that combines physical and chemical tactics to prevent insect access and the spread of insect-transmitted plant viruses in protected enclosures. This approach is based on a slow-release insecticide-treated net with large hole sizes that allow improved ventilation of greenhouses. The efficacy of a wide range of LLITNs was tested under laboratory conditions against Myzus persicae, Aphis gossypii and Bemisia tabaci. Two nets were selected for field tests under a high insect infestation pressure in the presence of plants infected with Cucumber mosaic virus and Cucurbit aphid-borne yellows virus. The efficacy of Aphidius colemani, a parasitoid commonly used for biological control of aphids, was studied in parallel field experiments.

Compostabilidad de envases de bolsas de PBAT+PLA y envases rígidos de PLA mediante tecnologías de pila y túnel

Los polímeros compostables suponen en torno al 30% de los bioplásticos destinados a envasado, siendo a su vez esta aplicación el principal destino de la producción de este tipo de materiales que, en el año 2013, superó 1,6 millones de toneladas. La presente tesis aborda la biodegradación de los residuos de envases domésticos compostables en medio aerobio para dos tipos de formato y materiales, envase rígido de PLA (Clase I) y dos tipos de bolsas de PBAT+PLA (Clases II y III). Sobre esta materia se han realizado diversos estudios en escala de laboratorio pero para otro tipo de envases y biopolímeros y bajo condiciones controladas del compost con alguna proyección particularizada en plantas. La presente tesis da un paso más e investiga el comportamiento real de los envases plásticos compostables en la práctica del compostaje en tecnologías de pila y túnel, tanto a escala piloto como industrial, dentro del procedimiento y con las condiciones ambientales de instalaciones concretas. Para ello, con el método seguido, se han analizado los requisitos básicos que debe cumplir un envase compostable, según la norma UNE – EN 13432, evaluando el porcentaje de biodegradación de los envases objeto de estudio, en función de la pérdida de peso seco tras el proceso de compostaje, y la calidad del compost obtenido, mediante análisis físico-químico y de fitotoxicidad para comprobar que los materiales de estudio no aportan toxicidad. En cuanto a los niveles de biodegrabilidad, los resultados permiten concluir que los envases de Clase I se compostan adecuadamente en ambas tecnologías y que no requieren de unas condiciones de proceso muy exigentes para alcanzar niveles de biodegradación del 100%. En relación a los envases de Clase II, se puede asumir que se trata de un material que se composta adecuadamente en pila y túnel industrial pero que requiere de condiciones exigentes para alcanzar niveles de biodegradación del 100% al afectarle de forma clara la ubicación de las muestras en la masa a compostar, especialmente en el caso de la tecnología de túnel. Mientras el 90% de las muestras alcanza el 100% de biodegradación en pila industrial, tan sólo el 50% lo consigue en la tecnología de túnel a la misma escala. En cuanto a los envases de Clase III, se puede afirmar que es un material que se composta adecuadamente en túnel industrial pero que requiere de condiciones de cierta exigencia para alcanzar niveles de biodegradación del 100% al poderle afectar la ubicación de las muestras en la masa a compostar. El 75% de las muestras ensayadas en túnel a escala industrial alcanzan el 100% de biodegradación y, aunque no se ha ensayado este tipo de envase en la tecnología de pila al no disponer de muestras, cabe pensar que los resultados de biodegrabilidad que hubiera podido alcanzar habrían sido, como mínimo, los obtenidos para los envases de Clase II, al tratarse de materiales muy similares en composición. Por último, se concluye que la tecnología de pila es más adecuada para conseguir niveles de biodegradación superiores en los envases tipo bolsa de PBAT+PLA. Los resultados obtenidos permiten también sacar en conclusión que, en el diseño de instalaciones de compostaje para el tratamiento de la fracción orgánica recogida selectivamente, sería conveniente realizar una recirculación del rechazo del afino del material compostado para aumentar la probabilidad de someter este tipo de materiales a las condiciones ambientales adecuadas. Si además se realiza un triturado del residuo a la entrada del proceso, también se aumentaría la superficie específica a entrar en contacto con la masa de materia orgánica y por tanto se favorecerían las condiciones de biodegradación. En cuanto a la calidad del compost obtenido en los ensayos, los resultados de los análisis físico – químicos y de fitotoxicidad revelan que los niveles de concentración de microorganismo patógenos y de metales pesados superan, en la práctica totalidad de las muestras, los niveles máximos permitidos en la legislación vigente aplicable a productos fertilizantes elaborados con residuos. Mediante el análisis de la composición de los envases ensayados se constata que la causa de esta contaminación reside en la materia orgánica utilizada para compostar en los ensayos, procedente del residuo de origen doméstico de la denominada “fracción resto”. Esta conclusión confirma la necesidad de realizar una recogida selectiva de la fracción orgánica en origen, existiendo estudios que evidencian la mejora de la calidad del residuo recogido en la denominada “fracción orgánica recogida selectivamente” (FORM). Compostable polymers are approximately 30% of bioplastics used for packaging, being this application, at same time, the main destination for the production of such materials exceeded 1.6 million tonnes in 2013. This thesis deals with the biodegradation of household packaging waste compostable in aerobic medium for two format types and materials, rigid container made of PLA (Class I) and two types of bags made of PBAT + PLA (Classes II and III). There are several studies developed about this issue at laboratory scale but for other kinds of packaging and biopolymers and under composting controlled conditions with some specifically plants projection. This thesis goes one step further and researches the real behaviour of compostable plastic packaging in the composting practice in pile and tunnel technologies, both at pilot and industrial scale, within the procedure and environmental conditions of concrete devices. Therefore, with a followed method, basic requirements fulfilment for compostable packaging have been analysed according to UNE-EN 13432 standard. It has been assessed the biodegradability percentage of the packaging studied, based on loss dry weight after the composting process, and the quality of the compost obtained, based on physical-chemical analysis to check no toxicity provided by the studied materials. Regarding biodegradability levels, results allow to conclude that Class I packaging are composted properly in both technologies and do not require high exigent process conditions for achieving 100% biodegradability levels. Related to Class II packaging, it can be assumed that it is a material that composts properly in pile and tunnel at industrial scale but requires exigent conditions for achieving 100% biodegradability levels for being clearly affected by sample location in the composting mass, especially in tunnel technology case. While 90% of the samples reach 100% of biodegradation in pile at industrial scale, only 50% achieve it in tunnel technology at the same scale. Regarding Class III packaging, it can be said that it is a material properly composted in tunnel at industrial scale but requires certain exigent conditions for reaching 100% biodegradation levels for being possibly affected by sample location in the composting mass. The 75% of the samples tested in tunnel at industrial scale reaches 100% biodegradation. Although this kind of packaging has not been tested on pile technology due to unavailability of samples, it is judged that biodegradability results that could be reached would have been, at least, the same obtained for Class II packaging, as they are very similar materials in composition. Finally, it is concluded that pile technology is more suitable for achieving highest biodegradation levels in bag packaging type of PBAT+PLA. Additionally, the obtained results conclude that, in the designing of composting devices for treatment of organic fraction selectively collected, it would be recommended a recirculation of the refining refuse of composted material in order to increase the probability of such materials to expose to proper environmental conditions. If the waste is grinded before entering the process, the specific surface in contact with organic material would also be increased and therefore biodegradation conditions would be more favourable. Regarding quality of the compost obtained in the tests, physical-chemical and phytotoxicity analysis results reveal that pathogen microorganism and heavy metals concentrations exceed, in most of the samples, the maximum allowed levels by current legislation for fertilizers obtained from wastes. Composition analysis of tested packaging verifies that the reason for this contamination is the organic material used for composting tests, comes from the household waste called “rest fraction”. This conclusion confirms the need of a selective collection of organic fraction in the origin, as existing studies show the quality improvement of the waste collected in the so-called “organic fraction selectively collected” (FORM).

El tiempo como sustancia de la forma : una aproximación al Museo de Arte Romano de Mérida desde los presupuestos del vitalismo

El modelo dominante durante la Era Moderna asume la presencia del hombre como sujeto dentro del gran engranaje mecánico del Cosmos. Asimismo, recoge una idea acerca del ser natural dentro de la tradición ontológica iniciada por el eleatismo presocrático que concibe a éste como lo inmutable y estático frente al cambio y al movimiento, los cuales se constituyen como meras apariencias. Durante el periodo anterior a la aparición de los grandes filósofos griegos se produce una transformación en donde, de la inicial cosmología vinculada a un tiempo primordial, se pasará a una visión del Universo como ente indestructible, atemporal, inmutable, perfecto, geométrico y espacial. Si en Demócrito se admite un universo sometido al azar y a la necesidad, en Platón el Universo sólo atiende a la necesidad. Este modelo ontológico se pone en entredicho cuando el hombre ya no es concebido como pieza de un sistema más amplio, sino como centro radical del pensamiento. La condición radical del hombre es entonces su propia vida, siendo éste el concepto troncal del denominado vitalismo cuyo más influyente representante en España es José Ortega y Gasset. El estatismo del ser –del hombre- pierde sentido; en palabras del propio Ortega, “no es un ser sino un estar siendo” lo que caracteriza a la vida humana. La razón cartesiana es ahora la razón vital y su objeto de estudio no es la naturaleza sino el propio devenir, es decir, el tiempo, la historia. Este planteamiento es fundamental para comprender el edificio que es objeto de este estudio, el Museo de Arte Romano de Mérida (1980-1985) de Rafael Moneo. Por ello el concepto de tiempo es utilizado como marco y estructura de la presente tesis, a sabiendas del notorio y muy significativo papel que este edificio desempeñó en la carrera de su autor y en el panorama nacional e internacional de la arquitectura y de la museología. Este proyecto nos permite acercarnos al pensamiento de su autor a través de un edificio que, aun habiendo sido ampliamente reconocido, no cuenta con un estudio suficientemente exhaustivo que recoja la amplitud y riqueza que encierra. Esta tesis no es un compendio de lo que ya se ha investigado sobre Mérida; es una aproximación global e interpretativa cuyo sentido sólo puede concebirse al vislumbrar la estructura completa de la misma en sintonía con el "lógos" vital, histórico y narrativo que el proyecto encierra. Se revisará la concepción histórica según la cual, la configuración espacial de la forma habría tenido primacía respecto a su configuración temporal, al remitir esta última a una condición espacializada y circunstancial. La componente vicaria de la circunstancia será elevada por Ortega a la categoría de esencial, visualizando así una paradoja cuya reformulación nos lleva a la concepción de un tiempo sustancial. El diccionario de la RAE, en su tercera acepción, define la sustancia como “aquello que permanece en algo que cambia”, lo cual nos remite al pensamiento antiguo. Se mostrará que lo que permanece no necesariamente implica una concepción estática y eleática de la forma, que la arquitectura esencial no es unívocamente la arquitectura atemporal del platonismo y que cabe concebir la "firmitas" desde la atención a la "durée" bergsoniana. Al asociar tradicionalmente la sustancia con el referido estatismo, se margina al tiempo y a la duración a lo no sustancial; por ello, se tratará de aproximar los términos de tiempo y sustancia para definir la forma. Ello conllevará al estudio de las notables patologías derivadas de la asunción de un tiempo cronológico en nuestra contemporaneidad frente a las cuales, las intuiciones contenidas en Mérida, se alinearán con la actual actitud revisionista en el ámbito del pensamiento filosófico y científico. En Mérida, la memoria recogerá los aspectos de la conciencia así como los aspectos vinculados a la experiencia íntima y colectiva como soporte para la consecución de un discurso. La dualidad entre intuición e inteligencia será recogida por Moneo con idea de trascender su incomunicabilidad, mediante una operación que consistirá en la reivindicación de una memoria irreductible, cuya morada estaría incardinada en el propio tiempo de la duración y de la vida y no en la espacialidad coextensiva del presente y de la acción funcional sobre la materia. Moneo asumirá el papel de la memoria como condición central de una forma que se encarnará al concebirse como un teatro. En la respuesta a la contradicción entre el hecho físico y el efecto psíquico de la experiencia humana residirá la pertinencia de un tiempo narrativo. Será entonces el lenguaje el encargado de aportar sentido a la obra mediante el recurso fundado en la dramatización de la experiencia, es decir, a través de una conexión entre la conciencia íntima y el carácter social y colectivo intrínseco en la arquitectura. ABSTRACT TIME AS A SUBSTANCE OF FORM. AN APPROACH TO THE ROMAN ART MUSEUM OF MÉRIDA FROM THE VIEWPOINT OF VITALISM. The dominant model during the Modern Era placed man as a subject inside the great mechanism of the cosmos. It is also based in an idea about natural being within the ontological tradition initiated by the pre-Socratic Eleatism that conceives it as something immutable and static in respect with change and movement, which are considered as mere appearances. Prior to the emergence of the great Greek philosophers occurred a transformation where concepts of cosmology linked to a primordial time, changed to a view of the universe as indestructible, timeless, unchanging, perfect, geometric and spatial. If Democritus accepted a universe subjected to randomness and necessity, Plato thought that the universe only worked by necessity. This ontological model is called into question when man is not conceived as a piece of a broader system, but as a radical center of thinking. The radical condition of man then is his own life. This is the core concept of so-called Vitalism, whose most influential representative in Spain was José Ortega y Gasset. The stillness of being – of man - loses its meaning; in the words of Ortega, “it is not being but being in progress” that characterizes human life. The Cartesian reason is now the vital reason and its subject of study is no longer nature but its own evolution, in other words, time and history. This approach is fundamental to understand the building which is the subject of this study, the Museum of Roman Art in Mérida (1980-1985) by Rafael Moneo. The concept of time is used as a framework and structure of this thesis, demonstrating the notorious and very significant role this building has implied in the career of its author and in the national and international panorama of architecture and museology. This project allow us to approach the thought of its author through a building that, even whilst widely recognized, does not yet have a sufficiently comprehensive study covering its breadth and richness. This thesis is not a compendium of what already has been researched on Merida; it is a global and interpretative approach whose meaning can only be conceived as a study of its complete structure in line with the vital, historical and narrative logos the project implies. We will review the historical idea where spatial configuration of the form would have had primacy with respect to temporary configuration, because the latter refers to a spatial and circumstantial condition. The vicarious nature of the circumstance will be elevated by Ortega to the category of essential, thus showing a paradox which reformulation leads us to the conception of a substantial time. The dictionary of the Spanish Royal Academy, in its third meaning, defines substance as "that which remains in something that changes". This is a reference to ancient thought. It will be shown that what remains does not necessarily imply a static and Eleatic conception of form. It will also be shown that the essential architecture is not uniquely the timeless architecture of Platonism and that it is possible to conceive the "firmitas" parallel to the "durée" of Henri Bergson. As a result of this traditional association between substance and stillness, it marginalizes the time and the duration to the non-substantial; for this reason, we will try to approach terms of time and substance to define the shape. This will involve studying significant pathologies resulting from an assumption of chronological time in our contemporary world against which, the insights contained in Merida, will be aligned with the current revisionist attitude in the fields of philosophical and scientific thought. In Merida, memory includes aspects of consciousness as well as aspects linked to the intimate and collective experience as a foundation for the achievement of discourse. The duality between intuition and intelligence is put forward by Moneo with the idea of transcending its lack of communication, by means of a resource consisting of the vindication of an irreducible memory, whose home would be embodied in the time of duration and life and not in the coextensive spatiality of the present and in the functional action on the matter. Moneo demonstrates the role of memory as a central condition of form as a theatre. In response to the contradiction between the physical fact and the psychological effect of human experience lies the relevance of narrative time. Language then assumes the responsibility of giving meaning to the work through the dramatization of experience, i.e., through a connection between the intimate consciousness and the intrinsic social and collective character of architecture.

VIOLÊNCIA PSICOLÓGICA CONJUGAL EM UNIVERSITÁRIOS: ESTUDO DE FATORES DE RISCO

A pesquisa aborda a violência psicológica tal como é definida pela Organização Mundial de Saúde (KRUG, 2002) Usamos também a definição de violência psicológica utilizada por Straus e Sweet (1992). Nosso objetivo geral foi identificar a ocorrência de violência psicológica conjugal entre estudantes universitários, e a correlação desta com fatores de risco. E os específicos foram verificar sua correlação com a auto-estima, a ingestão de álcool, a faixa etária, o número de filhos e o rendimento familiar dos participantes. Tivemos respondentes de ambos os gêneros, casados ou em união estável, com idades entre 16 e 60 anos e alunos da Universidade Metodista de São Paulo. A pesquisa de campo foi realizada na Universidade Metodista de São Paulo e abordou universitários da graduação, graduação tecnológica e cursos seqüenciais. Esta pesquisa é uma pesquisa descritiva e sua amostragem foi não-probabilística de conveniência, responderam ao instrumento 246 pessoas, que foram escolhidas com base nos critérios de inclusão e na sua disponibilidade imediata para responder à pesquisa. Obtivemos mais respondentes do gênero feminino (145) do que do masculino (100). O instrumento foi composto por: Escala de Táticas de Conflito (CTS1), Escala de Auto-Estima e Autoconceito de Rosenberg e um Questionário Sócio-demográfico Adaptado. A CTS 1 foi usada para medir a violência familiar, a escala de auto-estima foi usada para verificar a atitude positiva ou negativa das pessoas e o questionário foi usado para complementar dados sobre a história pessoal e conjugal dos respondentes. Foram analisados 246 instrumentos através do Estatístico SPSS 13,0 for Windows. Os resultados demonstraram que aproximadamente 30% das pessoas de ambos os gêneros e da amostra total apresentaram alto grau de violência psicológica. Verificamos que existe uma tendência de que quanto menor a auto-estima dos respondentes maior o grau de violência psicológica. Constatamos também a inexistência de correlação linear entre violência psicológica, costume de ingerir bebida alcoólica e quantidade de bebida alcoólica ingerida pelos respondentes. Este dado não é corroborado pela literatura pesquisada. Portanto, percebemos que o álcool em si diz pouco enquanto fator de risco para a ocorrência da violência psicológica. Sua articulação merece ser mais investigada e melhor delineada por meio da busca de conhecimentos e práticas que contribuam para a saúde da população. Concluímos que a violência psicológica conjugal muitas vezes é banalizada e tida como natural

VIOLÊNCIA PSICOLÓGICA CONJUGAL EM UNIVERSITÁRIOS: ESTUDO DE FATORES DE RISCO

A pesquisa aborda a violência psicológica tal como é definida pela Organização Mundial de Saúde (KRUG, 2002) Usamos também a definição de violência psicológica utilizada por Straus e Sweet (1992). Nosso objetivo geral foi identificar a ocorrência de violência psicológica conjugal entre estudantes universitários, e a correlação desta com fatores de risco. E os específicos foram verificar sua correlação com a auto-estima, a ingestão de álcool, a faixa etária, o número de filhos e o rendimento familiar dos participantes. Tivemos respondentes de ambos os gêneros, casados ou em união estável, com idades entre 16 e 60 anos e alunos da Universidade Metodista de São Paulo. A pesquisa de campo foi realizada na Universidade Metodista de São Paulo e abordou universitários da graduação, graduação tecnológica e cursos seqüenciais. Esta pesquisa é uma pesquisa descritiva e sua amostragem foi não-probabilística de conveniência, responderam ao instrumento 246 pessoas, que foram escolhidas com base nos critérios de inclusão e na sua disponibilidade imediata para responder à pesquisa. Obtivemos mais respondentes do gênero feminino (145) do que do masculino (100). O instrumento foi composto por: Escala de Táticas de Conflito (CTS1), Escala de Auto-Estima e Autoconceito de Rosenberg e um Questionário Sócio-demográfico Adaptado. A CTS 1 foi usada para medir a violência familiar, a escala de auto-estima foi usada para verificar a atitude positiva ou negativa das pessoas e o questionário foi usado para complementar dados sobre a história pessoal e conjugal dos respondentes. Foram analisados 246 instrumentos através do Estatístico SPSS 13,0 for Windows. Os resultados demonstraram que aproximadamente 30% das pessoas de ambos os gêneros e da amostra total apresentaram alto grau de violência psicológica. Verificamos que existe uma tendência de que quanto menor a auto-estima dos respondentes maior o grau de violência psicológica. Constatamos também a inexistência de correlação linear entre violência psicológica, costume de ingerir bebida alcoólica e quantidade de bebida alcoólica ingerida pelos respondentes. Este dado não é corroborado pela literatura pesquisada. Portanto, percebemos que o álcool em si diz pouco enquanto fator de risco para a ocorrência da violência psicológica. Sua articulação merece ser mais investigada e melhor delineada por meio da busca de conhecimentos e práticas que contribuam para a saúde da população. Concluímos que a violência psicológica conjugal muitas vezes é banalizada e tida como natural

The roles of the two proton input channels in cytochrome c oxidase from Rhodobacter sphaeroides probed by the effects of site-directed mutations on time-resolved electrogenic intraprotein proton transfer

The crystal structures of cytochrome c oxidase from both bovine and Paracoccus denitrificans reveal two putative proton input channels that connect the heme-copper center, where dioxygen is reduced, to the internal aqueous phase. In this work we have examined the role of these two channels, looking at the effects of site-directed mutations of residues observed in each of the channels of the cytochrome c oxidase from Rhodobacter sphaeroides. A photoelectric technique was used to monitor the time-resolved electrogenic proton transfer steps associated with the photo-induced reduction of the ferryl-oxo form of heme a3 (Fe4+ = O2−) to the oxidized form (Fe3+OH−). This redox step requires the delivery of a “chemical” H+ to protonate the reduced oxygen atom and is also coupled to proton pumping. It is found that mutations in the K channel (K362M and T359A) have virtually no effect on the ferryl-oxo-to-oxidized (F-to-Ox) transition, although steady-state turnover is severely limited. In contrast, electrogenic proton transfer at this step is strongly suppressed by mutations in the D channel. The results strongly suggest that the functional roles of the two channels are not the separate delivery of chemical or pumped protons, as proposed recently [Iwata, S., Ostermeier, C., Ludwig, B. & Michel, H. (1995) Nature (London) 376, 660–669]. The D channel is likely to be involved in the uptake of both “chemical” and “pumped” protons in the F-to-Ox transition, whereas the K channel is probably idle at this partial reaction and is likely to be used for loading the enzyme with protons at some earlier steps of the catalytic cycle. This conclusion agrees with different redox states of heme a3 in the K362M and E286Q mutants under aerobic steady-state turnover conditions.

Clinical relevance of the Helicobacter pylori gene for blood-group antigen-binding adhesin

Infection with Helicobacter pylori is associated with different human gastric diseases. Biochemical studies, in vitro adherence assays, and in vivo animal models revealed that epithelial attachment of H. pylori can be mediated by the blood-group antigen-binding adhesin (BabA) targeting human Lewisb surface epitopes. Studies with transgenic mice expressing the Lewisb epitope have shown that such attachment can alter disease outcome. In the current study, the presence of the babA2 gene encoding the adhesin was investigated in clinical isolates from a German population by using PCR and reverse transcription–PCR. A positive genotype was correlated to allelic variations in the genes encoding VacA and CagA and also to the prevalence of duodenal ulcer, distal gastric adenocarcinoma, mucosa-associated lymphoid tissue lymphoma, and antral gastritis. The presence of babA2 was significantly associated with duodenal ulcer (P = 0.0002) and adenocarcinoma (P = 0.033). In contrast, type 1 strains (vacAs1- and cagA-positive) were associated with only duodenal ulcer (P = 0.004) but not adenocarcinoma (P = 0.235). Genotype presence of babA2, vacAs1, and cagA (“triple-positive” strains) showed a highly significant correlation to the prevalence of ulcer (P = 0.000002) and adenocarcinoma (P = 0.014) and discriminated significantly better between disease outcome than did the current type 1 classification. These results indicate that the babA2 gene is of high clinical relevance and would be a useful marker to identify patients who are at higher risk for specific H. pylori-related diseases.

Compromised disease resistance in saponin-deficient plants

Saponins are glycosylated plant secondary metabolites found in many major food crops [Price, K. R., Johnson, I. T. & Fenwick, G. R. (1987) CRC Crit. Rev. Food Sci. Nutr. 26, 27–133]. Because many saponins have potent antifungal properties and are present in healthy plants in high concentrations, these molecules may act as preformed chemical barriers to fungal attack. The isolation of plant mutants defective in saponin biosynthesis represents a powerful strategy for evaluating the importance of these compounds in plant defense. The oat root saponin avenacin A-1 fluoresces under ultraviolet illumination [Crombie, L., Crombie, W. M. L. & Whiting, D. A. (1986) J. Chem. Soc. Perkins 1, 1917–1922], a property that is extremely rare among saponins. Here we have exploited this fluorescence to isolate saponin-deficient (sad) mutants of a diploid oat species, Avena strigosa. These sad mutants are compromised in their resistance to a variety of fungal pathogens, and a number of lines of evidence suggest that this compromised disease resistance is a direct consequence of saponin deficiency. Because saponins are widespread throughout the plant kingdom, this group of secondary metabolites may have general significance as antimicrobial phytoprotectants.

Comparative analyses of the secondary structures of synthetic and intracellular yeast MFA2 mRNAs

The overall folded (global) structure of mRNA may be critical to translation and turnover control mechanisms, but it has received little experimental attention. Presented here is a comparative analysis of the basic features of the global secondary structure of a synthetic mRNA and the same intracellular eukaryotic mRNA by dimethyl sulfate (DMS) structure probing. Synthetic MFA2 mRNA of Saccharomyces cerevisiae first was examined by using both enzymes and chemical reagents to determine single-stranded and hybridized regions; RNAs with and without a poly(A) tail were compared. A folding pattern was obtained with the aid of the mfold program package that identified the model that best satisfied the probing data. A long-range structural interaction involving the 5′ and 3′ untranslated regions and causing a juxtaposition of the ends of the RNA, was examined further by a useful technique involving oligo(dT)-cellulose chromatography and antisense oligonucleotides. DMS chemical probing of A and C nucleotides of intracellular MFA2 mRNA was then done. The modification data support a very similar intracellular structure. When low reactivity of A and C residues is found in the synthetic RNA, ≈70% of the same sites are relatively more resistant to DMS modification in vivo. A slightly higher sensitivity to DMS is found in vivo for some of the A and C nucleotides predicted to be hybridized from the synthetic structural model. With this small mRNA, the translation process and mRNA-binding proteins do not block DMS modifications, and all A and C nucleotides are modified the same or more strongly than with the synthetic RNA.