Low organisational justice and heavy drinking: a prospective cohort study

Objectives: To investigate whether low perceived organisational injustice predicts heavy drinking among employees. Methods: Data from the prospective occupational cohort study, the 10-Town Study, related to 15 290 Finnish public sector local government employees nested in 2432 work units, were used. Non-drinkers were excluded. Procedural, interactional and total organisational justice, heavy drinking (>=210 g of absolute alcohol per week) and other psychosocial factors were determined by means of questionnaire in 2000-2001 (phase 1) and 2004 (phase 2). Multilevel logistic regression analyses taking into account for the hierarchical structure of the data were conducted and adjustments were made for sex, age, socio-economic position, marital status, baseline heavy drinking, psychological distress and other psychosocial risk factors such as job strain and effort/reward imbalance. Results: After adjustments, participants who reported low procedural justice at phase 1 were about 1.2 times more likely to be heavy drinkers at phase 2 compared with their counterparts with high justice. Low perceived justice in interpersonal treatment and low perceived total organisational justice were associated with an elevated prevalence of heavy drinking only in the socio-demographics adjusted model. Conclusions: This is the first longitudinal study to show that low procedural justice is weakly associated with an increased likelihood of heavy drinking.

The Becker-Döring equations with exponentially size-dependent rate coefficients

This paper is concerned with an analysis of the Becker-Döring equations which lie at the heart of a number of descriptions of non-equilibrium phase transitions and related complex dynamical processes. The Becker-Döring theory describes growth and fragmentation in terms of stepwise addition or removal of single particles to or from clusters of similar particles and has been applied to a wide range of problems of physicochemical and biological interest within recent years. Here we consider the case where the aggregation and fragmentation rates depend exponentially on cluster size. These choices of rate coefficients at least qualitatively correspond to physically realistic molecular clustering scenarios such as occur in, for example, simulations of simple fluids. New similarity solutions for the constant monomer Becker-Döring system are identified, and shown to be generic in the case of aggregation and fragmentation rates that depend exponentially on cluster size.

Fictitious capital and the elusive quest in understanding its implications : illusions and paradoxes

This paper deals with the interaction between fictitious capital and the neoliberal model of growth and distribution, inspired by the classical economic tradition. Our renewed interest in this literature has a close connection with the recent international crisis in the capitalist economy. However, this discussion takes as its point of departure the fact that standard economic theory teaches that financial capital, in this world of increasing globalization, leads to new investment opportunities which improve levels of growth, employment, income distribution, and equilibrium. Accordingly, it is said that such financial resources expand the welfare of people and countries worldwide. Here we examine some illusions and paradoxes of such a paradigm. We show some theoretical and empirical consequences of this vision, which are quite different and have harmful constraints.

Measurement of the inclusive and differential t/t cross sections at 13 TeV in the all-jets boosted regime with CMS

The t/t production cross section is measured with the CMS detector in the all-jets channel in $pp$ collisions at the centre-of-mass energy of 13 TeV. The analysis is based on the study of t/t events in the boosted topology, namely events in which decay products of the quark top have a high Lorentz boost and are thus reconstructed in the detector as a single, wide jet. The data sample used in this analysis corresponds to an integrated luminosity of 2.53 fb-1. The inclusive cross section is found to be sigma(t/t) = 727 +- 46 (stat.) +115-112 (sys.) +- 20~(lumi.) pb, a value which is consistent with the theoretical predictions. The differential, detector-level cross section is measured as a function of the transverse momentum of the leading jet and compared to the QCD theoretical predictions. Finally, the differential, parton-level cross section is reported, measured as a function of the transverse momentum of the leading parton, extrapolated to the full phase space and compared to the QCD predictions.

Switching Patterns and Steady-State Analysis of Grid-Connected and Stand-Alone Single-Stage Boost-Inverters for PV Applications

Renewable or sustainable energy (SE) sources have attracted the attention of many countries because the power generated is environmentally friendly, and the sources are not subject to the instability of price and availability. This dissertation presents new trends in the DC-AC converters (inverters) used in renewable energy sources, particularly for photovoltaic (PV) energy systems. A review of the existing technologies is performed for both single-phase and three-phase systems, and the pros and cons of the best candidates are investigated. In many modern energy conversion systems, a DC voltage, which is provided from a SE source or energy storage device, must be boosted and converted to an AC voltage with a fixed amplitude and frequency. A novel switching pattern based on the concept of the conventional space-vector pulse-width-modulated (SVPWM) technique is developed for single-stage, boost-inverters using the topology of current source inverters (CSI). The six main switching states, and two zeros, with three switches conducting at any given instant in conventional SVPWM techniques are modified herein into three charging states and six discharging states with only two switches conducting at any given instant. The charging states are necessary in order to boost the DC input voltage. It is demonstrated that the CSI topology in conjunction with the developed switching pattern is capable of providing the required residential AC voltage from a low DC voltage of one PV panel at its rated power for both linear and nonlinear loads. In a micro-grid, the active and reactive power control and consequently voltage regulation is one of the main requirements. Therefore, the capability of the single-stage boost-inverter in controlling the active power and providing the reactive power is investigated. It is demonstrated that the injected active and reactive power can be independently controlled through two modulation indices introduced in the proposed switching algorithm. The system is capable of injecting a desirable level of reactive power, while the maximum power point tracking (MPPT) dictates the desirable active power. The developed switching pattern is experimentally verified through a laboratory scaled three-phase 200W boost-inverter for both grid-connected and stand-alone cases and the results are presented.

Geographical literacy, attitudes, and experiences of freshman students: A qualitative study at Florida International University

The purpose of the study was to explore the geography literacy, attitudes and experiences of Florida International University (FIU) freshman students scoring at the low and high ends of a geography literacy survey. The Geography Literacy and ABC Models formed the conceptual framework. Participants were freshman students enrolled in the Finite Math course at FIU. Since it is assumed that students who perform poorly on geography assessments do not have an interest in the subject, testing and interviewing students allowed the researcher to explore the assumption. ^ In Phase I, participants completed the Geography Literacy Survey (GLS) with items taken from the 2010 NAEP Geography Subject Area Assessment. The low 35% and high 20% performers were invited for Phase II, which consisted of semi-structured interviews. A total of 187 students participated in Phase I and 12 in Phase II. ^ The primary research question asked was what are the geography attitudes and experiences of freshman students scoring at the low and high ends of a geographical literacy survey? The students had positive attitudes regardless of how they performed on the GLS. ^ The study included a quantitative sub-question regarding the performance of the students on the GLS. The students’ performance on the GLS was equivalent to the performance of 12th grade students from the NAEP Assessment. There were three qualitative sub-questions from which the following themes were identified: the students’ definition of geography is limited, students recall more out of school experiences with geography, and students find geography valuable. In addition, there were five emergent themes: there is a concern regarding a lack of geographical knowledge, rote memorization of geographical content is overemphasized, geographical concepts are related to other subjects, taking the high school level AP Human Geography course is powerful, and there is a need for real-world applications of geographical knowledge. ^ The researcher offered as suggestions for practice to reposition geography in our schools to avoid misunderstandings, highlight its interconnectedness to other fields, connect the material to real world events/daily decision-making, make research projects meaningful, partner with local geographers, and offer a mandatory geography courses at all educational levels.^

Patterning optically clear films: co-planar transparent and color-contrasted thin films from interdiffused electrodeposited and solution-processed metal oxides

Transparent thin films can now be site-selectively patterned and positioned on surface using mask-defined electrodeposition of one oxide and overcoating with a different solution-processed oxide, followed by thermal annealing. Annealing allows an interdiffusion process to create a new oxide that is entirely transparent. A primary electrodeposited oxide can be patterned and the secondary oxide coated over the entire substrate to form high color contrast coplanar thin film tertiary oxide. The authors also detail the phase formation and chemical state of the oxide and how the nature of the electrodeposited layer and the overlayer influence the optical clearing of the patterned oxide film.

Association of myocardial T1-mapping CMR with hemodynamics and RV performance in pulmonary hypertension

Early detection of right ventricular (RV) involvement in chronic pulmonary hypertension (PH) is essential due to prognostic implications. T1 mapping by cardiac magnetic resonance (CMR) has emerged as a noninvasive technique for extracellular volume fraction (ECV) quantification. We assessed the association of myocardial native T1 time and equilibrium contrast ECV (Eq-ECV) at the RV insertion points with pulmonary hemodynamics and RV performance in an experimental model of chronic PH. Right heart catheterization followed by immediate CMR was performed on 38 pigs with chronic PH (generated by surgical pulmonary vein banding) and 6 sham-operated controls. Native T1 and Eq-ECV values at the RV insertion points were both significantly higher in banded animals than in controls and showed significant correlation with pulmonary hemodynamics, RV arterial coupling, and RV performance. Eq-ECV values also increased before overt RV systolic dysfunction, offering potential for the early detection of myocardial involvement in chronic PH.

Manipulating the structural and electronic properties of epitaxial NaNbO3 films via strain and stoichiometry

Due to their intriguing dielectric, pyroelectric, elasto-electric, or opto-electric properties, oxide ferroelectrics are vital candidates for the fabrication of most electronics. However, these extraordinary properties exist mainly in the temperature regime around the ferroelectric phase transition, which is usually several hundreds of K away from room temperature. Therefore, the manipulation of oxide ferroelectrics, especially moving the ferroelectric transition towards room temperature, is of great interest for application and also basic research. In this thesis, we demonstrate this using examples of NaNbO3 films. We show that the transition temperature of these films can be modified via plastic strain caused by epitaxial film growth on a structurally mismatched substrate, and this strain can be fixed by controlling the stoichiometry. The structural and electronic properties of Na1+xNbO3+δ thin films are carefully examined by among others XRD (e.g. RSM) and TEM and cryoelectronic measurements. Especially the electronic features are carefully analyzed via specially developed interdigitated electrodes in combination with integrated temperature sensor and heater. The electronic data are interpreted using existing as well as novel theories and models, they are proved to be closely correlated to the structural characteristics. The major results are: -Na1+xNbO3+δ thin films can be grown epitaxially on (110)NdGaO3 with a thickness up to 140 nm (thicker films have not been studied). Plastic relaxation of the compressive strain sets in when the thickness of the film exceeds approximately 10 – 15 nm. Films with excess Na are mainly composed of NaNbO3 with minor contribution of Na3NbO4. The latter phase seems to form nanoprecipitates that are homogeneously distributed in the NaNbO3 film which helps to stabilize the film and reduce the relaxation of the strain. -For the nominally stoichiometric films, the compressive strain leads to a broad and frequency-dispersive phase transition at lower temperature (125 – 147 K). This could be either a new transition or a shift in temperature of a known transition. Considering the broadness and frequency dispersion of the transition, this is actually a transition from the dielectric state at high temperature to a relaxor-type ferroelectric state at low temperature. The latter is based on the formation of polar nano-regions (PNRs). Using the electric field dependence of the freezing temperature, allows a direct estimation of the volume (70 to 270 nm3) and diameter (5.2 to 8 nm, spherical approximation) of the PNRs. The values confirm with literature values which were measured by other technologies. -In case of the off-stoichiometric samples, we observe again the classical ferroelectric behavior. However, the thermally hysteretic phase transition which is observed around 620 – 660 K for unstrained material is shifted to room temperature due to the compressive strain. Beside to the temperature shift, the temperature dependence of the permittivity is nearly identical for strained and unstrained materials. -The last but not least, in all cases, a significant anisotropy in the electronic and structural properties is observed which arises automatically from the anisotropic strain caused by the orthorhombic structure of the substrate. However, this anisotropy cannot be explained by the classical model which tries to fit an orthorhombic film onto an orthorhombic substrate. A novel “square lattice” model in which the films adapt a “square” shaped lattice in the plane of the film during the epitaxial growth at elevated temperature (~1000 K) nicely explains the experimental results. In this thesis we sketch a way to manipulate the ferroelectricity of NaNbO3 films via strain and stoichiometry. The results indicate that compressive strain which is generated by the epitaxial growth of the film on mismatched substrate is able to reduce the ferroelectric transition temperature or induce a phase transition at low temperature. Moreover, by adding Na in the NaNbO3 film a secondary phase Na3NbO4 is formed which seems to stabilize the main phase NaNbO3 and the strain and, thus, is able to engineer the ferroelectric behavior from the expected classical ferroelectric for perfect stoichiometry to relaxor-type ferroelectric for slightly off-stoichiometry, back to classical ferroelectric for larger off-stoichiometry. Both strain and stoichiometry are proven as perfect methods to optimize the ferroelectric properties of oxide films.

Procesos hopping a través del modelo difusional en materiales nanocristalinos usados para aplicaciones fotovoltaicas

Se presentan los modelos de hopping de rango variable (variable range hopping; VRH), vecinos cercanos (nearest neighbor hopping; NNH) y barreras de potencial presentes en las fronteras de grano; como mecanismos de transporte eléctrico predominantes en los materiales semiconductores para aplicaciones fotovoltaicas. Las medidas de conductividad a oscuras en función de temperatura fueron realizadas para región de bajas temperaturas entre 120 y 400 K con Si y compuestos Cu3BiS2 y Cu2ZnSnSe4. Siguiendo la teoría de percolación, se obtuvieron parámetros hopping y la densidad de estados cerca del nivel de Fermi, N(EF), para todas las muestras. A partir de los planteamientos dados por Mott para VRH, se presentó el modelo difusional, que permitió establecer la relación entre la conductividad y la densidad de estados de defecto o estados localizados en el gap del material. El análisis comparativo entre modelos, evidenció, que es posible obtener mejora hasta de un orden de magnitud en valores para cada uno de los parámetros hopping que caracterizan el material.

Semi-implicit finite strain constitutive integration and mixed strain/stress control based on intermediate configurations

A new semi-implicit stress integration algorithm for finite strain plasticity (compatible with hyperelas- ticity) is introduced. Its most distinctive feature is the use of different parameterizations of equilibrium and reference configurations. Rotation terms (nonlinear trigonometric functions) are integrated explicitly and correspond to a change in the reference configuration. In contrast, relative Green–Lagrange strains (which are quadratic in terms of displacements) represent the equilibrium configuration implicitly. In addition, the adequacy of several objective stress rates in the semi-implicit context is studied. We para- metrize both reference and equilibrium configurations, in contrast with the so-called objective stress integration algorithms which use coinciding configurations. A single constitutive framework provides quantities needed by common discretization schemes. This is computationally convenient and robust, as all elements only need to provide pre-established quantities irrespectively of the constitutive model. In this work, mixed strain/stress control is used, as well as our smoothing algorithm for the complemen- tarity condition. Exceptional time-step robustness is achieved in elasto-plastic problems: often fewer than one-tenth of the typical number of time increments can be used with a quantifiable effect in accuracy. The proposed algorithm is general: all hyperelastic models and all classical elasto-plastic models can be employed. Plane-stress, Shell and 3D examples are used to illustrate the new algorithm. Both isotropic and anisotropic behavior is presented in elasto-plastic and hyperelastic examples.

Species richness and composition of butterfly assemblages (Lepidoptera:Rhopalocera) along the altitudinal gradient of Serra da Estrela

Os gradientes altitudinais são importantes modelos em ecologia pois permitem, numa escala reduzida, estudar a influência da variação de diversas variáveis ambientais nos padrões de biodiversidade existentes. Estes padrões são influenciados por diversos factores, desde variáveis climáticas às relacionadas com a perturbação humana. Nesta tese é estudada a variação na composição das comunidades de borboletas ao longo do gradiente altitudinal na Serra da Estrela e são testadas duas hipóteses sobre os padrões de riqueza específica ao longo do gradiente altitudinal: a regra de Rapoport e o “Mid Domain Effect” (MDE). Foram assinaladas 70 espécies de borboletas neste estudo e constatou-se que a variação na riqueza de espécies de borboletas apresenta um padrão “mid peak” apoiando o MDE. Verificou-se também que as comunidades de borboletas do mesmo nível altitudinal são mais semelhantes entre si independentemente da vertente em que se encontram e são também mais semelhantes com as comunidades dos níveis altitudinais adjacentes. Finalmente, a análise da distribuição de algumas espécies ameaçadas de borboletas torna evidente a necessidade de realização de mais estudos sobre a biologia da conservação deste grupo de animais em Portugal; Abstract: Altitudinal gradients are important ecological models because they allow us to study the influence of diverse environmental variables in the existing biodiversity patterns. These patterns are influenced by various factors, from climatic variables to variables related to human disturbance. In this thesis we studied the variations in the composition of the butterfly assemblages along the altitudinal gradient of Serra da Estrela and we tested two hypotheses regarding the species richness patterns along the altitudinal gradient: Rapoport’s rule and the Mid Domain Effect (MDE). In this study 70 butterfly species were marked recorded and it was observed that the butterfly species richness presents a mid-peak pattern supporting the MDE. It was also noted that the butterfly assemblages in the same altitudinal level show more similarity within themselves regardless of the slope they are found in, and are also more similar to the assemblages present in the adjacent altitudinal levels. Finally, the distribution of some threatened butterfly species was analyzed and it became evident the need to do more studies regarding the conservation biology of this animal group in Portugal.

Ecotoxicological studies of aquatics compartments contaminated with glyphosate and AMPA using Daphnia similis.

2008

Optimization and validation of an analytical method for determination of glyphosate and AMPA in apples using SPE-HPLC with post-column derivatization.

2008

Photocatalytic production of chemicals and hydrogen from biomass

In this work, with the aim to tackle several approaches towards sustainable chemistry, two reactions were studied: aerobic photo-oxidation of biomass derived 5-hydroxymethyl-2-furfural (HMF), and anaerobic photo-reforming of glycerol known as a by-product in biodiesel industry, towards production of chemicals and hydrogen. Solar-assisted reactions were performed by means of heterogeneous photocatalysis, in mild conditions such as atmospheric pressure, room temperature and water as a benign solvent. Titanium dioxide (lab-synthesized and commercial) was used as a photo-active catalyst, which surface was modified by introducing different metal (e.g. Au, Au-Cu, Pt) and metal oxide (e.g. NiO) nanoparticles. The prepared materials were characterized by XRD, DRS, BET, TEM, SEM, RAMAN and other techniques. The influence of the support, the size and type of the deposited metal and metal oxide nanoparticles on the photo-catalytic transformation of HMF and glycerol was evaluated. In the case of HMF, the influence of the base addition and the oxygen content on the reaction selectivity was also studied. The effect of the crystalline phase composition and morphology of TiO2 in the glycerol photo-reforming reaction was assessed as well. The surface of the synthesized TiO2 nano-powders was investigated by means of Surface Organometallic Chemistry (SOMC) approach. In particular, the surface was characterized by chemical titration and DRIFT techniques. Furthermore, the SOMC concept allowed preparing of well-dispersed Pt nanoparticles on the TiO2 surface. The photo-catalytic activity of this sample in the glycerol photo-reforming process was tested and compared to that of other Pt-containing catalysts prepared by conventional technics. In view of avoiding the agglomeration and sedimentation of suspended titania powders in water media, thick films of synthesized and commercial TiO2 were deposited on a conductive substrate using screen-printing technique. The prepared electrodes were characterized by profilometry, SEM, XRD, optical, electrochemical and photo-electrochemical methods.