Le rôle de l'hormone anti-müillerienne dans la régulation du fonctionnement de l'ovaire. Revue de la littérature

Anti-mullerian hormone, also called AMH, belongs to the large family of transforming growth factor P. Its role in the sexual differentiation of male fetus is now well known. Recently, AMH has been demonstrated to play an important role in the ovarian function. In fact, AMH seems to regulate the kinetics of follicular development, inhibiting the follicular recruitment and the follicular growth. Thus, this intra-gonadic cybernin could be a decisive determinant of the rapidity of follicular pool exhaustion. Today, some experimental data from the literature suggest that AMH could be a reliable marker of ovarian reserve. This review summarizes the present knowledge about AMH and its role in physiology but also in ovarian pathology.

In vivo small animal micro-CT using nanoparticle contrast agents.

Computed tomography (CT) is one of the most valuable modalities for in vivo imaging because it is fast, high-resolution, cost-effective, and non-invasive. Moreover, CT is heavily used not only in the clinic (for both diagnostics and treatment planning) but also in preclinical research as micro-CT. Although CT is inherently effective for lung and bone imaging, soft tissue imaging requires the use of contrast agents. For small animal micro-CT, nanoparticle contrast agents are used in order to avoid rapid renal clearance. A variety of nanoparticles have been used for micro-CT imaging, but the majority of research has focused on the use of iodine-containing nanoparticles and gold nanoparticles. Both nanoparticle types can act as highly effective blood pool contrast agents or can be targeted using a wide variety of targeting mechanisms. CT imaging can be further enhanced by adding spectral capabilities to separate multiple co-injected nanoparticles in vivo. Spectral CT, using both energy-integrating and energy-resolving detectors, has been used with multiple contrast agents to enable functional and molecular imaging. This review focuses on new developments for in vivo small animal micro-CT using novel nanoparticle probes applied in preclinical research.

Integrating simultaneous prosocial and antisocial behavior into theories of collective action.

Trust and cooperation constitute cornerstones of common-pool resource theory, showing that "prosocial" strategies among resource users can overcome collective action problems and lead to sustainable resource governance. Yet, antisocial behavior and especially the coexistence of prosocial and antisocial behaviors have received less attention. We broaden the analysis to include the effects of both "prosocial" and "antisocial" interactions. We do so in the context of marine protected areas (MPAs), the most prominent form of biodiversity conservation intervention worldwide. Our multimethod approach relied on lab-in-the-field economic experiments (n = 127) in two MPA and two non-MPA communities in Baja California, Mexico. In addition, we deployed a standardized fishers' survey (n = 544) to verify the external validity of our findings and expert informant interviews (n = 77) to develop potential explanatory mechanisms. In MPA sites, prosocial and antisocial behavior is significantly higher, and the presence of antisocial behavior does not seem to have a negative effect on prosocial behavior. We suggest that market integration, economic diversification, and strengthened group identity in MPAs are the main potential mechanisms for the simultaneity of prosocial and antisocial behavior we observed. This study constitutes a first step in better understanding the interaction between prosociality and antisociality as related to natural resources governance and conservation science, integrating literatures from social psychology, evolutionary anthropology, behavioral economics, and ecology.

Evaluación del daño mecánico visible conferido por los sistemas de trilla a la semilla de soja

En Argentina el cultivo de soja alcanzó, durante la campaña 2014-2015, un área implantada de 20,4 millones de hectáreas. Su cosecha se realiza durante los meses de otoño, por lo tanto las condiciones climáticas diarias se manifiestan con cambios durante la jornada de trabajo e inciden directamente sobre el estado del cultivo, produciendo variaciones en la calidad del producto entregado por la cosechadora. El parque de maquinaria disminuido en los últimos años, hace a un incremento de la capacidad de trabajo que se traduce en aumento de la veloci-dad de avance por parte de los operadores y por lo tanto de las velocidades de trilla, para cumplir con los objetivos propuestos. No hay suficiente información sobre las pérdidas en la calidad del grano generadas por los conjuntos de las cosechadoras. Esto reviste de importan-cia para determinar el tiempo de almacenaje que varía según el destino de la cosecha. Lo ex-puesto justificó la realización del presente trabajo, donde se evaluó la variabilidad del desem-peño de cuatro cosechadoras con diferentes conjuntos de trilla, trabajando sobre un cultivo de soja, durante una jornada de trabajo y con diferentes regulaciones en sus sistemas de trilla, cuantificado su efecto a través de la rotura visible otorgado al grano. El trabajo constituye un aporte al análisis del daño que los diferentes sistemas de trilla y la incidencia de la variación de humedad le confiere al grano de soja en la cosecha. Todos los sistemas evaluados muestran existencia diferencial de daño en las variables analizadas. El comportamiento del sistema sin variador permitió ratificar cómo la variación de humedad del grano modifica la calidad del producto entregado. Existió dependencia en los resultados hallados: el contenido de humedad, el sistema de trilla y la velocidad tangencial conque trabajó cada sistema, se consideran facto-res determinantes en la calidad del producto entregado en cada caso. Se concluye sobre la importancia de la regulación del régimen de trilla acorde a las condiciones de cultivo y su posibilidad de incremento para el logro de una mayor capacidad de trabajo.

El número en la escuela

El artículo “El Número en la Escuela”presenta avances de investigación realizados por estudiantes de la Maestría en Docencia de las Matemáticas de la Universidad Pedagógica Nacional como parte de sus respectivos trabajos de grado. El primero, referido a la formación de docentes de preescolar y primeros grados de educación primaria sobre Estructura Aditiva, expone la forma en que abordar dicha estructura contribuye al proceso de construcción del número Natural en los primeros grados de escolaridad. El segundo, basado en el modelo del profesor Carlo Federici, estudia la construcción de los números racionales como operadores sobre magnitudes, específicamente, sobre longitudes cuya representación son los segmentos. Y el tercero, permite reflexionar sobre el acercamiento al concepto de número real con estudiantes de Secundaria y Media.

Finite volume methods applied to the computational modelling of welding phenomena

This paper presents the computational modelling of welding phenomena within a versatile numerical framework. The framework embraces models from both the fields of computational fluid dynamics (CFD) and computational solid mechanics (CSM). With regard to the CFD modelling of the weld pool fluid dynamics, heat transfer and phase change, cell-centred finite volume (FV) methods are employed. Additionally, novel vertex-based FV methods are employed with regard to the elasto-plastic deformation associated with the CSM. The FV methods are included within an integrated modelling framework, PHYSICA, which can be readily applied to unstructured meshes. The modelling techniques are validated against a variety of reference solutions.

Modelling the fluid dynamics and coupled phenomena in arc weld pools

A 3D model of melt pool created by a moving arc type heat sources has been developed. The model solves the equations of turbulent fluid flow, heat transfer and electromagnetic field to demonstrate the flow behaviour phase-change in the pool. The coupled effects of buoyancy, capillary (Marangoni) and electromagnetic (Lorentz) forces are included within an unstructured finite volume mesh environment. The movement of the welding arc along the workpiece is accomplished via a moving co-ordinator system. Additionally a method enabling movement of the weld pool surface by fluid convection is presented whereby the mesh in the liquid region is allowed to move through a free surface. The surface grid lines move to restore equilibrium at the end of each computational time step and interior grid points then adjust following the solution of a Laplace equation.

Evaluation of distortions in laser welded shipbuilding parts using local-global finite element approach

In recognition of the differences of scale between the welding pool and the heat affected zone along the welding line on one hand, and the overall size of the components being welded on the other, a local-global finite element approach was developed for the evaluation of distortions in laser welded shipbuilding parts. The approach involves the tandem use of a 'local' and a 'global' step. The local step involves a three-dimensional finite element model for the simulation of the laser welding process using the Sysweld finite element code, which takes into account thermal, metallurgical, and mechanical aspects. The simulation of the laser welding process was performed using a non-linear heat transfer analysis, based on a keyhole formation model, and a coupled transient thermomechanical analysis, which takes into account metallurgical transformations using the temperature dependent material properties and the continuous cooling transformation diagram. The size and shape of the keyhole used in the local finite element analysis was evaluated using a keyhole formation model and the Physica finite volume code. The global step involves the transfer of residual plastic strains and the stiffness of the weld obtained from the local model to the global analysis, which then provides the predicted distortions for the whole part. This newly developed methodology was applied to the evaluation of global distortions due to laser welding of stiffeners on a shipbuilding part. The approach has been proved reliable in comparison with experiments and of practical industrial use in terms of computing time and storage.

Vacuum arc remelting time dependent modelling

Vacuum arc remelting (VAR) aims at production of high quality, segregation-free alloys. The quality of the produced ingots depends on the operating conditions which could be monitored and analyzed using numerical modelling. The remelting process uniformity is controlled by critical medium scale time variations of the order 1-100 s, which are physically initiated by the droplet detachment and the large scale arc motion at the top of liquid pool [1,2]. The newly developed numerical modelling tools are addressing the 3-dimensional magnetohydrodynamic and thermal behaviour in the liquid zone and the adjacent ingot, electrode and crucible.

Multiscale modeling of the onset of freckle formation during vacuum arc remelting

A multiscale model for the Vacuum Arc Remelting process (VAR) was developed to simulate dendritic microstructures during solidification and investigate the onset of freckle formation. On the macroscale, a 3D multi-physics model of VAR was used to study complex physical phenomena, including liquid metal flow with turbulence, heat transfer, and magnetohydrodynamics. The results showed that unsteady fluid flow in the liquid pool caused significant thermal perturbation at the solidification front. These results were coupled into a micromodel to simulate dendritic growth controlled by solute diffusion, including local remelting. The changes in Rayleigh number as the microstructure remelts was quantified to provide an indicator of when fluid flow channels (i.e. freckles) will initiate in the mushy zone. By examining the simulated microstructures, it was found that the Rayleigh number increased more than 300 times during remelting, which suggests that thermal perturbation could be responsible for the onset of freckle formation.

A unified 3D model of the VAR process

A 3D time-dependent model of the VAR process has been developed using CFD techniques. The model solves the coupled field equations for fluid flow, heat transfer (including phase change) and electromagnetic field, for both the electrode and the ingot. The motion of the electic arc 'preferred spot' can be specified based on observations. Correlations are sought between the local gap height, resulting from instantaneous liquid pool surface shape and electrode tip shape, and the arc motion. The detailed behaviour of the melting film on the electrode tip is studies using a spectral free surface technique, which allows investigation of the drops' detachment and drip shorts.

Vacuum arc remelting time dependent modelling

Newly developed numerical modelling tools are described, which address the 3-dimensional (3D) time-dependent magnetohydrodynamic and thermal behaviour in the liquid pool zone in the adjacent ingot, electrode and crucible. The melting electrode film flow and the droplet detachment initiation are simulated separately by an axisymmetric transient model.

Public-public partnerships (PUPs) in water

Water operators need to be efficient, accountable, honest public institutions providing a universal service. Many water services however lack the institutional strength, the human resources, the technical expertise and equipment, or the financial or managerial capacity to provide these services. They need support to develop these capacities. The vast majority of water operators in the world are in the public sector – 90% of all major cities are served by such bodies. This means that the largest pool of experience and expertise, and the great majority of examples of good practice and sound institutions, are to be found in existing public sector water operators. Because they are public sector, however, they do not have any natural commercial incentive to provide international support. Their incentive stems from solidarity, not profit. Since 1990, however, the policies of donors and development banks have focussed on the private companies and their incentives. The vast resources of the public sector have been overlooked, even blocked by pro-private policies. Out of sight of these global policy-makers, however, a growing number of public sector water companies have been engaged, in a great variety of ways, in helping others develop the capacity to be effective and accountable public services. These supportive arrangements are now called 'public-public partnerships' (PUPs). A public-public partnership (PUP) is simply a collaboration between two or more public authorities or organisations, based on solidarity, to improve the capacity and effectiveness of one partner in providing public water or sanitation services. They have been described as: “a peer relationship forged around common values and objectives, which exclude profit-seeking”.1 Neither partner expects a commercial profit, directly or indirectly. This makes PUPs very different from the public–private partnerships (PPPs) which have been promoted by the international financial institutions (IFIs) like the World Bank. The problems of PPPs have been examined in a number of reports. A great advantage of PUPs is that they avoid the risks of such partnerships: transaction costs, contract failure, renegotiation, the complexities of regulation, commercial opportunism, monopoly pricing, commercial secrecy, currency risk, and lack of public legitimacy.2 PUPs are not merely an abstract concept. The list in the annexe to this paper includes over 130 PUPs in around 70 countries. This means that far more countries have hosted PUPs than host PPPs in water – according to a report from PPIAF in December 2008, there are only 44 countries with private participation in water. These PUPs cover a period of over 20 years, and been used in all regions of the world. The earliest date to the 1980s, when the Yokohama Waterworks Bureau first started partnerships to help train staff in other Asian countries. Many of the PUP projects have been initiated in the last few years, a result of the growing recognition of PUPs as a tool for achieving improvements in public water management. This paper attempts to provide an overview of the typical objectives of PUPs; the different forms of PUPs and partners involved; a series of case studies of actual PUPs; and an examination of the recent WOPs initiative. It then offers recommendations for future development of PUPs.

RuhrCampusOnline: Hochschulübergreifendes E-Learning in der Universitätsallianz Metropole Ruhr

Das Projekt RuhrCampusOnline zielt darauf ab, hochschulübergreifende Lehre für die Partnerhochschulen der Universitätsallianz Metropole Ruhr (UAMR) auf der Basis von Blended-Learning-Arrangements zu implementieren. Der Beitrag stellt die strategische Bedeutung dieses Vorhabens für die Universitäten im Ruhrgebiet dar und beschreibt die Organisation und Vorgehensweise im Projekt. Ziel ist es, einen Pool von Kursen zu implementieren, die einen hohen Online-Anteil haben, und von Studierenden hochschulübergreifend genutzt werden. Über die Internet-Plattform RCO werden diese Kurse sichtbar gemacht, das Belegen der Veranstaltung realisiert und der Austausch von Leistungspunkten unterstützt. Der Beitrag stellt erste Erfahrungen nach einem Jahr Projektlaufzeit vor. (DIPF/ Orig.)

Aerobic Metabolism Octopine Production And Phosphoarginine As Sources Of Energy In The Phasic And Catch Adductor Muscles Of The Giant Scallop Placopecten-Magellanicus During Swimming And The Subsequent Recovery Period

1. The energy contributions of aerobic metabolism, phosphoarginine, ATP and octopine in the adductor muscles of P. magellanicus were examined during swimming and recovery. 2. A linear relationship was observed between the size of the phosphoarginine pool and the number of valve snaps. A linear increase in arginine occurred during the same period. 3. 3. Octopine was formed during the first few hours of recovery, particularly in the phasic muscle. 4. The restoration of the phosphoarginine pool appeared to be by aerobic metabolism. 5. It is concluded that the role of octopine formation is to supply energy when the tissues are anoxic and to operate at such a rate as to maintain the basal rate of energy production.