Output from the 1998 Product Development Value Stream Workshop: A Framework for Understanding Information Flow in the Product Development Process

The descriptions below and the attached diagrams are outputs of the 1998 LAI Product Development Focus Team workshop on the Value Chain in Product Development. A working group at that workshop was asked to model the product development process: in terms of the phases of product development and their interfaces, boundaries and outputs. Their work has proven to be generally useful to LAI researchers and industry members, and so is formalized here.

Strategies for Lean Product Development

The essence of lean is very simple, but from a research and implementation point of view overwhelming. Lean is the search for perfection through the elimination of waste and the insertion of practices that contribute to reduction in cost and schedule while improving performance of products. This concept of lean has wide applicability to a large range of processes, people and organizations, from concept design to the factory floor, from the laborer to the upper management, from the customer to the developer. Progress has been made in implementing and raising the awareness of lean practices at the factory floor. However, the level of implementation and education in other areas, like product development, is very low.

Value Creation in Product Development

-Definitions -Value concepts -Value creation framework -Value creation and product development

Value Stream Analysis and Mapping for Product Development

This paper explores the concept of Value Stream Analysis and Mapping (VSA/M) as applied to Product Development (PD) efforts. Value Stream Analysis and Mapping is a method of business process improvement. The application of VSA/M began in the manufacturing community. PD efforts provide a different setting for the use of VSA/M. Site visits were made to nine major U.S. aerospace organizations. Interviews, discussions, and participatory events were used to gather data on (1) the sophistication of the tools used in PD process improvement efforts, (2) the lean context of the use of the tools, and (3) success of the efforts. It was found that all three factors were strongly correlated, suggesting success depends on both good tools and lean context. Finally, a general VSA/M method for PD activities is proposed. The method uses modified process mapping tools to analyze and improve process.

Value Stream Analysis and Mapping for Product Development

This paper explores the concept of Value Stream Analysis and Mapping (VSA/M) as applied to Product Development (PD) efforts. Value Stream Analysis and Mapping is a method of business process improvement. The application of VSA/M began in the manufacturing community. PD efforts provide a different setting for the use of VSA/M. Site visits were made to nine major U.S. aerospace organizations. Interviews, discussions, and participatory events were used to gather data on (1) the sophistication of the tools used in PD process improvement efforts, (2) the lean context of the use of the tools, and (3) success of the efforts. It was found that all three factors were strongly correlated, suggesting success depends on both good tools and lean context. Finally, a general VSA/M method for PD activities is proposed. The method uses modified process mapping tools to analyze and improve process.

Measuring Value in Product Development

“What is value in product development?” is the key question of this paper. The answer is critical to the creation of lean in product development. By knowing how much value is added by product development (PD) activities, decisions can be more rationally made about how to allocate resources, such as time and money. In order to apply the principles of Lean Thinking and remove waste from the product development system, value must be precisely defined. Unfortunately, value is a complex entity that is composed of many dimensions and has thus far eluded definition on a local level. For this reason, research has been initiated on “Measuring Value in Product Development.” This paper serves as an introduction to this research. It presents the current understanding of value in PD, the critical questions involved, and a specific research design to guide the development of a methodology for measuring value. Work in PD value currently focuses on either high-level perspectives on value, or detailed looks at the attributes that value might have locally in the PD process. Models that attempt to capture value in PD are reviewed. These methods, however, do not capture the depth necessary to allow for application. A methodology is needed to evaluate activities on a local level to determine the amount of value they add and their sensitivity with respect to performance, cost, time, and risk. Two conceptual tools are proposed. The first is a conceptual framework for value creation in PD, referred to here as the Value Creation Model. The second tool is the Value-Activity Map, which shows the relationships between specific activities and value attributes. These maps will allow a better understanding of the development of value in PD, will facilitate comparison of value development between separate projects, and will provide the information necessary to adapt process analysis tools (such as DSM) to consider value. The key questions that this research entails are: · What are the primary attributes of lifecycle value within PD? · How can one model the creation of value in a specific PD process? · Can a useful methodology be developed to quantify value in PD processes? · What are the tools necessary for application? · What PD metrics will be integrated with the necessary tools? The research milestones are: · Collection of value attributes and activities (September, 200) · Development of methodology of value-activity association (October, 2000) · Testing and refinement of the methodology (January, 2001) · Tool Development (March, 2001) · Present findings at July INCOSE conference (April, 2001) · Deliver thesis that captures a formalized methodology for defining value in PD (including LEM data sheets) (June, 2001) The research design aims for the development of two primary deliverables: a methodology to guide the incorporation of value, and a product development tool that will allow direct application.

Optimizing Product Line Designs: Efficient Methods and Comparisons

We compare a broad range of optimal product line design methods. The comparisons take advantage of recent advances that make it possible to identify the optimal solution to problems that are too large for complete enumeration. Several of the methods perform surprisingly well, including Simulated Annealing, Product-Swapping and Genetic Algorithms. The Product-Swapping heuristic is remarkable for its simplicity. The performance of this heuristic suggests that the optimal product line design problem may be far easier to solve in practice than indicated by complexity theory.

A survey addressing the fundamental matrix estimation problem

Epipolar geometry is a key point in computer vision and the fundamental matrix estimation is the only way to compute it. This article surveys several methods of fundamental matrix estimation which have been classified into linear methods, iterative methods and robust methods. All of these methods have been programmed and their accuracy analysed using real images. A summary, accompanied with experimental results, is given

Rank estimation of trajectory matrix in motion segmentation

A novel technique for estimating the rank of the trajectory matrix in the local subspace affinity (LSA) motion segmentation framework is presented. This new rank estimation is based on the relationship between the estimated rank of the trajectory matrix and the affinity matrix built with LSA. The result is an enhanced model selection technique for trajectory matrix rank estimation by which it is possible to automate LSA, without requiring any a priori knowledge, and to improve the final segmentation

Informed recommender: basing recommendations on consumer product reviews

Recommender systems attempt to predict items in which a user might be interested, given some information about the user's and items' profiles. Most existing recommender systems use content-based or collaborative filtering methods or hybrid methods that combine both techniques (see the sidebar for more details). We created Informed Recommender to address the problem of using consumer opinion about products, expressed online in free-form text, to generate product recommendations. Informed recommender uses prioritized consumer product reviews to make recommendations. Using text-mining techniques, it maps each piece of each review comment automatically into an ontology

Recommender System Based on Consumer Product Reviews

Consumer reviews, opinions and shared experiences in the use of a product is a powerful source of information about consumer preferences that can be used in recommender systems. Despite the importance and value of such information, there is no comprehensive mechanism that formalizes the opinions selection and retrieval process and the utilization of retrieved opinions due to the difficulty of extracting information from text data. In this paper, a new recommender system that is built on consumer product reviews is proposed. A prioritizing mechanism is developed for the system. The proposed approach is illustrated using the case study of a recommender system for digital cameras

MA167exam01pdf

Exam questions and solutions in PDF

Plan exportador Metal Muebles y Cia. Ltda.

La idea principal de este trabajo, es realizar un evaluación sobre las diferentes posibilidades que se presentan para exportar uno de los productos que fabrica la empresa METAL MUEBLES Y CIA LTDA fundada por el señor Álvaro de Jesús Chalarca en el año de 1994 quien hizo posible la elaboración de este Plan Exportador autorizando el suministro de toda la información de la empresa. Se evaluaran cada uno de los países que participaran en la elaboración de este trabajo así como los procesos y situaciones que se deben tener en cuenta para obtener un excelente resultado. Se hará igualmente una revisión de todas las debilidades y fortalezas con las que cuenta cada país, que afectan el proceso de exportación. Durante el desarrollo del proyecto se realizara una matriz teniendo en cuenta diferentes tipo de variables que ayudaran a medir la factibilidad de que el plan exportador se lleve a cabo en los países de: Ecuador, Chile y Perú. Finalmente se realizara el desarrollo de una estrategia de comercialización para cumplir el fin propuesto y ampliar las posibilidades de expansión de METAL MUEBLES Y CIA LTDA.

Plan exportador para la empresa Croc Ltda. en su línea de productos "Don Chicharrón"

Este trabajo de grado pretende realizar un Plan Exportador mediante el cual sea posible determinar si la empresa Croc Ltda. está o no preparada para exportar su línea de producto “Don Chicharrón”. El proceso se desarrolla a través de: Descripción del estado actual de la empresa, Realización del “Diagnóstico de la Empresa”, Inteligencia de Mercados sumado a la Matriz de Proexport y finalmente el Diseño del Plan de Logística incluido una simulación de costos de exportación al mercado objetivo; en este caso Perú. Como resultado de la investigación se logro determinar que la empresa Croc Ltda. se encuentra en un nivel medio de internacionalización debido a que existen falencias en la ejecución de la Gestión de Mercados, Gestión de Operaciones, Gestión Financiera y Gestión de Talento Humano. Después de seleccionar posibles países para exportar y variables a investigar para construir la “Matriz de Proexport” se concluyo el país objetivo, alterno y contingente; Perú, México y España respectivamente. De esta manera, se comienza la investigación de mercados para los tres países. Para finalizar, en el diseño del plan de logística se determino que la mejor forma para exportar “Don Chicharrón” al Perú es por vía marítima a través del Incoterm DDU (Delivered Duty Unpaid). Es así como se puede concluir este trabajo de grado, y darle cierre a la investigación y entregar a la empresa Croc Ltda. en su línea de productos “Don Chicharrón” un Plan Exportador para que se pueda hacer uso de éste en su proceso de internacionalización.

Análisis del potencial exportador para balones de fútbol en Inglaterra : caso Escobar y Martínez con su marca GOLTY

Este documento consiste en un plan exportador para Escobar y Martínez, especialmente para su marca GOLTY. La primera parte es el análisis y diagnóstico de la compañía con base en la matriz del Boston Consulting Group, seguida del análisis de mercado, realizado con fuentes secundarias que logra identificar cómo el Reino Unido es un mercado con una conciencia creciente sobre los deportes, dispuestos a pagar por alta calidad, similar a lo sucedido con España y Francia La selección de mercados se realiza por medio de la matriz de Proexport con base en los resultados de la investigación con fuentes secundarias. Finalmente, se usa una de las más importantes teorías de la administración, como lo es la teoría matricial, para sugerir algunas estrategias a seguir con el fin de tener un proceso de exportación exitoso hacia los mercados del Reino Unido, España y Francia.