Rolling of thin strip and foil: Application of a tribological model for "mixed" lubrication

A mechanical model of cold rolling of foil is coupled with a sophisticated tribological model. The tribological model treats the "mixed" lubrication regime of practical interest, in which there is "real" contact between the roll and strip as well as pressurized oil between the surfaces. The variation of oil film thickness and contact ratio in the bite is found by considering flattening of asperities on the foil and the build-up of hydrodynamic pressure through the bite. The boundary friction coefficient for the contact areas is taken from strip drawing tests under similar tribological conditions. Theoretical results confirm that roll load and forward slip decrease with increasing rolling speed due to the decrease in contact ratio and friction. The predictions of the model are verified using mill trials under industrial conditions. For both thin strip and foil, the load predicted by the model has reasonable agreement with the measurements. For rolling of foil, forward slip is overestimated. This is greatly improved if a variation of friction through the bite is considered.

Product scheduling for thermal energy reduction in papermaking industries

Papermaking is considered as an energy-intensive industry partly due to the fact that the machinery and procedures have been designed at the time when energy was both cheap and plentiful. A typical paper machine manufactures a variety of different products (grades) which impose variable per-unit raw material and energy costs to the mill. It is known that during a grade change operation the products are not market-worthy. Therefore, two different production regimes, i.e. steady state and grade transition can be recognised in papermaking practice. Among the costs associated with paper manufacture, the energy cost is 'more variable' due to (usually) day-to-day variations of the energy prices. Moreover, the production of a grade is often constrained by customer delivery time requirements. Given the above constraints and production modes, the product scheduling technique proposed in this paper aims at optimising the sequence of orders in a single machine so that the cost of production (mainly determined by the energy) is minimised. Simulation results obtained from a commercial board machine in the UK confirm the effectiveness of the proposed method. © 2011 IFAC.

Efficient strategies for process design and optimization in ring rolling

Ring rolling is an incremental bulk forming process for the near-net-shape production of seamless rings. This paper shows how nowadays the process design and optimization can be efficiently supported by simulation methods. For reliable predictions of the material flow and the microstructure evolution it's necessary to include a real ring rolling mill's control algorithm into the model. Furthermore an approach for the online measurement of the profile evolution during the process is presented by means of axial profiling in ring rolling. Hence the definition of new ring rolling strategies is possible even for advanced geometries.

The forming of variable cross-section I-beams by hot rolling

A process is presented for the forming of variable cross-section I-beams by hot rolling. Optimized I-beams with variable cross-section offer a significant weight advantage over prismatic beams. By tailoring the cross-section to the bending moment experienced within the beam, around 30% of the material can be saved compared to a standard section. Production of such beams by hot rolling would be advantageous, as It combines high volume capacity with high material yields. Through controlled variation of the roll gap during multiple passes, beams with a variable cross-section have been created using shaped rolls similar to those used for conventional I-beam rolling. The process was tested experimentally on a small scale rolling mill, using plasticine as the modelling material. These results were then compared to finite element simulations of individual stages of the process conducted using Abaqus/Standard. Results here show that the process can successfully form a beam with a variable depth web. The main failure modes of the process, and the limitations on the achievable variations In geometry are also presented. Finally, the question of whether or not optimal beam geometries can be created by this process Is discussed. © 2011 Wiley-VCH Verlag GmbH & Co. KGaA. Weinheim.

Population genetic structure of an endemic cyprinid fish, Ancherythroculter nigrocauda, in the upper reaches of the Yangtze River and its implication for conservation

Ancherythroculter nigrocauda is a cyprinid fish endemic to the upper reaches of the Yangtze River, which has been reported to have 2 or 3 chambers to its air bladder. Morphological studies showed no differences between individuals with different types of air bladder, but did demonstrate geographical differences from different sources. After the completion of the Three Gorges Dam, it was expected that the population of this species would decrease, but artificial breeding and stocking is under consideration to protect this species from extinction. In the present study, mtDNA cytochrome b gene sequences were determined and analyzed for A. nigrocauda samples of different morphotypes and sources to identify their genetic differentiations, and thereby guide plans for the artificial propagation and conservation of this species. Haplotype diversity index values (h) and nucleotide diversity values (pi) for all the populations were found to be high indicating their high level genetic diversity. An analysis of molecular variance identified no differentiation among the studied populations. Therefore, we suggested that the individuals of different morphological types and geographical sources belong to the same species. To maintain its high level genetic diversity, it mill he necessary to use large and diverse sources of parental fish for artificial reproduction.

Influence of dioxin and metal-contaminated sediment on phase I and II biotransformation enzymes in silver crucian carp

Several biochemical responses were measured in silver crucian carp (Carassius auratus gibelio) after exposure to sediments obtained from contaminated Ya-Er Lake, No, 1 pond, and an unpolluted reference site, Honglian Lake. After 1 week of exposure, a significant induction of the phase I biotransformation enzyme (ethoxylresorufin-o-deethylase, EROD) was found (83-fold of control), whereas the phase II biotransformation enzyme (glutathione S-transferase, GST) exhibited a slight, but significant induction (1,4-fold of control) after 4 weeks of exposure. The level of cellular glutathione in the liver was also slightly elevated after 4 weeks of exposure. The delayed response of GST to the contaminants indicates that the phase I and phase II biotransformation enzymes are regulated differently in fish. The results suggest that EROD is a sensitive bioindicator to assess the toxicity of dioxin-contamined sediment in the laboratory, (C) 1998 Academic Press.

Structural evolution of mechanically alloyed nanocrystalline FeAl intermetallics

Nanostructured FeAl intermetallics were prepared directly by mechanical alloying (MA) in a high-energy planetary ball-mill. The phase transformations and structural changes occurring in the studied material during mechanical alloying were investigated by X-ray diffraction (XRD). Transmission electron microscopy (TEM) was employed to examine the morphology of the powders. Thermal behavior of the milled powders was examined by differential scanning calorimetry (DSC). Disordered Fe(Al) solid solution was formed at the early stage. After 30 h of milling, Fe(Al) solid solution transformed into an ordered FeAl phase. The average crystallite size reduction down to about 12 nm was accompanied by the introduction of the average lattice strain up to 1.7%. The TEM picture showed that the size of milled powders was less than 30 nm. (c) 2007 Elsevier B.V. All rights reserved.

两株耐碱性木聚糖酶产生菌的筛选及产酶条件研究

本文主要研究了从造纸厂碱性土壤中筛选得到的，能够产生耐碱木聚糖酶的两株放线菌X24-14和X15-17。通过16 S rRNA基因序列分析并结合菌株的形态特征以及生理生化特性，初步认为菌株X15-17为拟诺卡氏菌属（Nocardiopsis）的一个潜在新种；菌株X24-14为纤维化纤维菌（Cellulosimicrobium cellulans）。 在此基础上探索了菌株X24-14和菌株X15-17所产木聚糖酶的基本酶学性质。研究发现，两株菌所产的木聚糖酶的耐碱性均较强： 1）菌株X24-14所产的木聚糖酶，在pH 4.2～9.4的范围内能维持较高的活力，pH 9.4条件下，仍能保持80％的酶活力；2）菌株X15-17所产的木聚糖酶在pH 4.0～9.0的范围内能维持较高的活力，pH 9.0条件下，仍能保持80％的酶活力；3）两株菌所产的木聚糖酶均具有较好的pH稳定性，在pH 2.0～11.0范围内稳定，pH 11.0、4 ℃条件下处理24 h仍具有75％的活力。 本文还重点研究了菌株X24-14在不同培养基成分及不同培养条件下的产酶情况，确定了其适宜的产酶条件。结果显示，菌株X24-14的最适碳源为麸皮；最适氮源为蛋白胨；最适产酶pH为pH 8.5。菌株X24-14适宜的产酶条件为：麸皮60 g/L，蛋白胨10 g/L，K2HPO4 7.0 g/L，pH 8.5，接种量为5％，37 ℃，200 r/min发酵培养108 h。 Two strains of actinomycetes, X24-14 and X15-17, which produced alkali-tolerant xylanase were screened from the soil samples collected from a pulp mill in china. Based on the morphological, physiochemical characteristics and 16S rRNA sequence, X24-14 was priminarily identified as cellulosimicrobium cellulans ; X15-17 was priminarily identified as a new species of Nocardiopsis. The investigation examined the enzyme activities which produced by X24-14 and X15-17 under different pH and different temperatures. The results showed that : 1）The xylanase from X24-14 had characteristic of alkali-tolerance: It remains 80% relative activity at pH ranges between pH 4.2 and pH 9.4 under 50℃. 2)The xylanase from X15-17 also showed characteristic of alkali-tolerance, it remains 80% relative activity at pH ranges between pH 4.0and pH 9.0 under 50℃. 3）The xylanase from the two strains showed alkali-stable characteristics. They were stable at pH ranges between pH 2.0 and pH 11.0, showing 75% of its maximal activity remaining under 24 hours of treatment at 4℃. We also studied the effect of different growth conditions: carbon source, nitrogen sources, inoculum size, and initial pH on the production of xylanase of strain X24-14. The results showed that :The optimal carbon source was wheat bran; The optima nitrogen source was peptone; The maximum xylanase activity was achieved in the medium containing 60 g/L wheat bran, 10 g/L peptone, 7 g/L K2HPO4, inoculum size 5% and pH 8.5, under 37℃ in 108 h.

碱法草浆造纸蒸煮黑液厌氧生物降解性及其主要微生物类群研究

造纸行业是造成我国水环境有机污染物的重要污染源之一，其水污染的特点是小厂多、草浆多、工艺落后、污染扩散面广、造成废 水排放量大，每年排放的废水量约39亿立方米，占全国工业废水排放量的1/6，其中有机污染物（以BOD5计）160万吨左右，约占全 国工业废水中有机污染物总量的1/4。尤以占全国制浆造纸行业90%以上的碱法草浆造纸厂的蒸煮黑液量大面广，除含有机物外，还 含有木质素、残碱、硫化物、氯化物等污染物，属于PH值高、色度深、难于治理的高浓度有机废水，对水体污染特别严重，各地要 求治理呼声很高，急待研究并尽快找出各种有效的治理途径。对于碱法草浆蒸煮，黑液高浓度废水的治理，有各种方法，根据国内 的研究进展和我们已有试验工作表明，最经济有效，具有实用价值，在生产上可获得成功是厌氧处理法。近10多年来，国外关于高 效厌氧处理技术研究进展迅速，并出现了多种多样的工艺设备，如高效厌氧生物反应器，并在实用化方面取得了很大成绩，建立了 生产性装置，达到了高负荷运行，效果良好。本试验是根据我们已有研究基础，针对我国国情，对小型制浆造纸厂水污染防治除了 开发碱回收及各种综合利用技术外，要特别加强废水(废液)实用技术研究的指导思想，本试验采用改进型的上流式厌氧污泥床反应 器，设计了两种试验方案，通过试验结果如下。1. 试验方案I—碱法草浆黑液酸化和厌氧发酵I号UASB反应器动态模型试验结果表 明：(1). 采用中温35℃±1℃高效厌氧反应器USAB内装有填料(陶粒)和三相分离器，具有保持高浓度生物量和防止污泥流失的特点 ，污泥浓度Vs 可达30%以上，因而具有高效、节能、产能、滞留期短的优点，当进水CODcr在7500-10000mg/l，HRT由7天缩短到3天 ，有机容积负荷在1.22gCODcr/l·d-3.43gCODcr/l·d时，CODcr平均去除率可达55%-45.5%，最高CODcr去除率可达60.2-63.5%， BOD5去除率可达75.9-83.2%,沼气容积产气率可达0.29-0.67l/l·d，每克CODcr转化为沼气产率达0.39-0.48l/gCODcr·d，CH4含量 65.8-75.5%。厌氧发酵出水再用化学法进行后处理脱除难降解的木质素，CODcr总去除率达80%以上。(2). 动态试验结果表明：采 用酸化—厌氧发酵处理黑液工艺合理，技术路线可行。2. 试验方案II—黑液用化学法(Hcl)去除木质素进行厌氧发酵，II号UASB反 应器动态模型试验结果表明：(1). 采用中温35℃±1℃高效厌氧反应器UASB(内有软填料)，当进水CODcr7000-13000mg/l左右，HRT 由6天缩短到1天，有机负荷由0.98gCODcr/l·d增加到11gCODcr/l·d时，COD平均去除率均可稳定在70-77%，BOD5去除率为87.3- 93.1%，沼气容积产气率0.21-2.6l/l·d，每克CODcr转化为沼气产率为0.39-0.48l/gCODcr·d，高的可达0.53l/gCODcr·d，转化 率较高，CH4含量63-70%。(2). 试验证明碱法草浆黑液物化预处理—厌氧发酵处理的技术路线也是可行的，工艺合理、效果较好。 在有条件的工厂可采用。3.厌氧发酵阶段几大类群微生物计数表明：(1). 当发酵工艺和运行处于相对稳定状态时，微生物群体的 组成也达到相对的稳定，各类微生物之间保持动态平衡关系。当产乙酸菌的数量为107-108个/ml时，产甲烷菌的数量为105-106 个/ml，当产乙酸菌数量为106-107个/ml时，产甲烷菌的数量为103-105个/ml。(2).稳态运行条件下，黑液预处理为甲烷发酵创造 了有利的生态环境，获得了较好的处理效果和较高的COD转化为沼气的产率0.39-0.48l/g·CODcr·d，反应器中形成较为稳定而数 量较下水污泥中高1-2个数量级的厌氧发酵微生物区系组成。这一结果为黑液厌氧发酵提供了微生物理论依据。Paper industry is one of the important pollution source of water environment in our country. Its character of water pollution is many small factories, much grass pulp, disadvantageous technique, large preading area of pullution. Its effluent makes up 1/6 of whole country's industry wastwater. Its organic pollutant accounts 1/4 of whole country's. Alkaline grass paper pulp effluent with pollutants such as ligoin, remaining alkali sulfide, chloride besides organic material, is a kind of high concentrate organic wastewater which has high PH walug, dark colour and is difficult in treatment. There is urgent require to find ways to treat the wastewater. There are different ways to treat alkaline paper grass pulp effluent. According to the research advances and our experiment work, the most economical and useful way is anaerobic degradation which was advanced quick in last ten years. In the control of waste water of small pulp paper mill, the study of wastewater utilization technology should be emphasized, besides alkaline retrieving and different kinds of comprehensive utilization technology. Our experiment used modified UASB(Upflow Anaerobic Sludge Blanket Reactor). Two kinds of plan were disgned. The results are lined below. 1. The first experiment plant-aciding black pulp effluent and methanogenic digestion. The dynamic model experiment results of I-UASB reactor showed: (1)The mesophilic(35℃±1℃)high effect UASB reactor having haydite and threee state seperation in it had the character of keeping high bioimass concentration and preventing losss of sludge. It had advantages of high effect, energe saving, energe prodcing and short HRT(Hydroulic retention time). When the influent COD was 7500-10000mg, HRT was shortened from 7 days to 3days, organic loading rate was 1.22g-3.43COD/l· d, the average COD removal efficiency was 55%-45%. The highest COD efficiency was 60.2-63.5%, BOD removal of 75.9 -83.4% was achieved. Biogass production rate were up to 0.29-0.67l/l·d. Biogass converted efficiency from every gram of COD could reach 0.39-0.48l/gCOD·d. Methane content was 65.0-75.5%. Chemical method was used to deplate lignin in anaerobic digestion effluent. Total COD removal efficiency could be more than 80%. (2)Using aciding annaerobic digestion to treat the black effluent was reseanable in technique and technology. 2. The second experiment plan-anaerobic digestion was used after the chemical method was used to deplate lignin in the black effluent. The result of dynamic experiment of II-UASB reactor showed: (1)High effect mesophilic (35℃±1℃)UASB reactor having soft slaffing in was used. When influent COD was about 7000-13000mg/l, HRT was shortened from 6 days to 1 day and organic loading rate was increased from 0.90 to 11g COD /l·d, average COD removal efficiency remained stable on 70-77%. BOD, removal efficiency was between 87.3-93.1%. Biogass production rate was 0.2-2.6l/l ·d .Biogass converted efficiency from a gram of COD was 0.39-0.481/gCOD·d with the high value of 0.53l/gCOD·d. Methane content was 63-70%. (2)The way that using physical, chemical Pre-treatment-anaerobic digestion to treat alkaline black effluent is feasible and can be used in some factories when the condition exists. 3. Counting of several class of microoganisms in anaerobic digestion stage showed: (1)As the disgestion was in stable motion, the compositon of microorganic colony could get relative stable. Dynamic balance was remaining among different kinds of microorganism such as methanogenic bacteria, Acidogenic bacteria, sulfate reducing bacteria, and heterotrophic bacteria. (2)Under stable motion, the pre-treatment of black effluent produced favourable eco-enviroment for methanegenic digestion. Good treatment effect and high biogass convertent efficiency from COD(0.39-0.48l/g·COD· d)were gotten. Some stable and high quantity(10-100times more than sewage sludge)microorganism colony were formed in the reactor. This result provided theoretical basis for anaerobic digestion of black effluent.

耐酸产甲烷菌的分离及其复合菌剂的研究

本文从成都龙泉垃圾填埋场和宜宾造纸厂分离到耐酸性能优良的高温产甲烷菌RY3和中温产甲烷菌SH4，并将其与实验室现有的利用不同底物的产甲烷菌配伍组合成了复合菌剂。采用活性污泥作为固体附着物，研制出了固体产甲烷菌复合菌剂。 菌株RY3的pH耐受范围为5.5～10.5，最适生长pH 6.0～8.0。菌株RY3为革兰氏阳性，长杆状，多数单生，不运动；菌落浅黄色，形状近圆形；利用H2+CO2或甲酸盐作为唯一碳源生长，不利用乙酸盐，对氯霉素非常敏感。该菌最适生长温度为55℃～65℃，最适NaCl浓度为0～2%。根据形态和生理生化特性及16S rDNA序列分析将其初步定为热自养甲烷热杆菌（Methanothermobacter thermautotrophicus）。添加RY3菌液与仅添加厌氧污泥作为接种物相比一周内可使达到最大产甲烷速率所需时间缩短三分之二，甲烷总产量提高约1.8倍。菌株SH4的生长pH范围5.5～9.5，其对酸碱具有良好的适应性，培养3天后，在初始pH值为6.0～8.0的培养基中甲烷产量相差不大，且基本达到最大产量。SH4革兰氏染色阳性，短杆状，多数单生，不运动；菌落近圆形，微黄；利用H2+CO2或甲酸盐作为唯一碳源生长，不利用乙酸盐，对氯霉素非常敏感。SH4最适生长pH 为7.0，最适生长温度为35℃，最适NaCl浓度为0～1.5%。实验表明，添加SH4菌液与仅添加厌氧污泥作为接种物相比可使产甲烷启动时间缩短三分之一，甲烷总产量亦有大幅提高。从形态和生理生化特征以及16S rDNA序列分析表明SH4为嗜树木甲烷短杆菌（Methanobrevibacter arboriphilus）。 以活性污泥为附着物，与培养基和菌种经搅拌后厌氧发酵可得产甲烷菌固体复合菌剂。固体复合菌剂的pH耐受范围为5.5～9.5，温度耐受范围为15℃～65℃，表明其对环境的适应性较强。以猪粪为底物进行厌氧发酵，接种复合菌剂进行试验，以接种实验室长期富集的产甲烷厌氧污泥作为对照，在20℃时，发酵甲烷浓度与对照基本一致，但每日产气量优于对照，第15天时接种复合菌剂的发酵瓶每日产气量是对照的1.59倍；50℃时达到最大甲烷含量所需时间比对照缩短三分之二，三周内总产气量约为对照的2.7倍，甲烷总产量约为2.8倍。以不加接种物为对照，接种复合菌剂20℃时发酵甲烷含量达到50%约需2周，对照2周内甲烷含量最高仅为4.3%；50℃时接种复合菌剂发酵仅需约1周甲烷含量便可达50%，对照则至少需要2周。 In this paper, high-temperature Methanogen RY3 and middle-temperature SH4 were isolated from Chengdu Longquan refuse landfill and Yibin paper mill. They could be used to make compound inoculum that producing methane with the existing Methanogens utilized different substrate. With using anaerobic activated sludge be solid fixture, the process had been designed to produce solid compound inoculum. Strain RY3 possessed excellent capacity of acid and alkali-tolerant. The pH-tolerant scale of RY3 was 5.5～10.5 and its optimum pH value for growth was 6.0～8.0. RY3 was G+, long-rod shape, monothetic and nonmotile, the colony was pale yellow with suborbicular-shape. Formate or H2+CO2 but not acetate was utilized by RY3 as sole C-source, and it was very sensitive to chloramphenicol. Besides, strain RY3 grew fastest at 55℃～65 and 0℃～2% NaCl. Characteristics of modality and physiology with sequence analysis of the 16s rDNA gene of strain RY3 preliminarily showed that it was Methanothermobacter thermautotrophicus. The experiments indicated that the time which began to produce methane with the highest velocity could be shortened two third by adding RY3 in one week, and the total methane production also was 1.8 times than before. Strain SH4 possessed wide scale of growing pH（5.5～9.5）and excellent ability of acclimatizing itself to acid-alkali. The methane production had no apparent difference among those cultivated in different initial pH（6.0～8.0）after three days and equaled to the maximum production basically. Cells of SH4 were G+, short-rod sharp, monothetic and nonmotile. The colony was pale yellow with suborbicular-shape. Formate or H2+CO2 but not acetate was utilized by SH4 as sole C-source, and it was very sensitive to chloramphenicol. Besides, it grew fastest at pH 7.0，55 ℃～65 and 0℃～2% NaCl concentration. The experiment indicated the time that began to produce methane could be shortening one third by adding SH4. And the total methane production also rose apparently. Characteristic of modality and physiology with sequence analysis of the 16S rDNA gene of strain SH4 demonstrated it was Methanobrevibacter arboriphilus. The activated sludge was utilized as fixture, mixed with culture medium and inocolum, that the solid compound inoculum could be produced by anaerobic fermentation. The compound inoculum could grow between pH 5.5～9.5, 15℃～65. It demonstrated the compound inoculum ha℃ve great ability of adapting to circumstance. In the experiment that making pig manure be substrate and taking the anaerobic sludge producing methane that cultured in long term in laboratory to be comparison, the concentration of methane in fermentation added compound inoculum almost equal to the comparison at 20℃, but the volume of gas production could be a little higher. The gas production everyday inoculated compound inoculum was 1.59 times to comparison. The time that the concentration of methane to maximum could be shortening by two third by adding compound inoculum, and the total gas production was 2.7 times to comprison while the total methane production was 2.8 times. If take the no inoculum be the comprasion, anaerobic fermentation added compound inoculum made the concentration of methane to 50% in 2 weeks but the comparison only to 4.3% at 20℃. The time that the concentration of methane to 50% by adding compound inoculum only need 1 week, but the comparison need 2 weeks at 50℃.

辽西地区水分亏缺与树木生长关系

利用修正的Thornthwaite最大蒸发力公式,计算了辽西地区不同市的水分亏缺量。各市最大潜在蒸发散计算结果是:朝阳1180.6 mm,锦州1146.0 mm,葫芦岛1140.1 mm,阜新1030.3 mm;水分亏缺量计算结果为:朝阳-658.3 mm,锦州-538.4 mill,葫芦岛-544.8 mm,阜新-626.9 mm。利用美国spss数理统计软件计算了油松与蒙古栎的胸径连年生长量和对应的各年1—12月份的月均温、月降雨量、平均相对湿度的回归关系,表明油松生长与温度紧密,蒙古栎生长与水分关系紧密。

Crystallization of mechanically alloyed amorphous W-Mg alloy under high pressure

Pure metal powder mixtures of W and Mg at the desired composition were milled in conventional high-energy ball mill, and amorphous alloy W50Mg50 was obtained after milling for 20 h. The structure evolution of elemental powder mixtures was studied following milling and subsequent high pressure and high temperature treatment. The amorphous alloy transform into a nanocrystalline material below 1050 degreesC at 4.0 GPa. On increasing the temperature, it transforms into a mixture of several new crystal phases under high-pressure condition. It also found that both mechanical alloying and high pressure treatment are the two necessary processes to form the nanocrystalline and the new phases.

Characteristics and comparative study of chlorophyll-protein complexes from siphonous green algae

By mild PAGE method, 11, 11, 7 and 9 chlorophyll-protein complexes were isolated from two species of siphonous green algae ( Codium fragile (Sur.) Harlot and Bryopsis corticulans Setch.), green alga (Ulothrix flacca (Dillw.) Thur.), and spinach (Spinacia oleracea Mill.), respectively. Apparent molecular weights, Chi a/b ratios, distribution of chlorophyll, absorption spectra, low temperature fluorescence spectra of these complexes were determined, and compared with one another. PS I complexes of two siphonous green algae are larger in apparent molecular weight because of the attachment of relative highly aggregated LHC I. Four isolated light-harvesting complexes of PSII are all siphonaxanthin-Chl a/b-protein complexes, and they are not monomers and oligomers like those in higher plants. Especially, the absence of 730 nn fluorescence in PS I complexes indicates a distinct structure and energy transfer pattern.

两种大型水母毒素的分离纯化及其蛋白酶活性和抗氧化活性的研究

水母在我国分布广，种类多，数量大，是一种丰富的海洋生物资源。已研究的水母毒素主要分布于触角和刺丝囊中，是一类结构新颖独特的肽类毒素。水母种类的不同，其毒素的结构、生物活性往往不同。本文首次报道了海蜇（Rhopilema esculentum Kishinouye）毒素 和白色霞水母（Cyanea nozakii Kishinouye）毒素的提取、纯化、理化性质及蛋白酶和抗氧化方面的生物学活性，主要结果如下： 1.用DEAE Sepharose Fast Flow分离海蜇毒素，用含0.4 mol/L NaCl 的PBS (0.02 M，pH 8.0) 进行阶段洗脱时，得到的组分是组蛋白H4。 2.水母毒素的蛋白酶活性实验结果为：海蜇毒素和白色霞水母毒素都有蛋白酶活性。该两种毒素的蛋白酶活性都受理化因素的影响，其中0.5%甘油和1%邻菲罗啉可以有效的抑制海蜇毒素的蛋白酶活性。 3.对海蜇毒素蛋白的体外抗氧化活性研究表明：蛋白样品均具有抗氧化性，它们对超氧阴离子和羟自由基具有显著的清除作用。对白色霞水母毒素蛋白的体外抗氧化活性研究表明：白色霞水母蛋白具有较高的清除羟自由基的能力，白色霞水母蛋白对超氧阴离子的清除作用较弱。白色霞水母蛋白有较强的还原能力，但没有螯合能力。 通过本文的研究表明水母毒素具有蛋白酶活性和抗氧化活性，能够清除氧自由基。这些研究结果为开发利用水母资源和毒素的合理、综合利用打下了坚实的基础。