Automobile friction materials: a test instrument and technique for determining dynamic mechanical properties in relation to brake squeal

This study is primarily concerned with the problem of break-squeal in disc brakes, using moulded organic disc pads. Moulded organic friction materials are complex composites and due to this complexity it was thought that they are unlikely to be of uniform composition. Variation in composition would under certain conditions of the braking system, cause slight changes in its vibrational characteristics thus causing resonance in the high audio-frequency range. Dynamic mechanical propertes appear the most likely parameters to be related to a given composition's tendency to promote squeal. Since it was necessary to test under service conditions a review was made of all the available commercial test instruments but as none were suitable it was necessary to design and develop a new instrument. The final instrument design, based on longitudinal resonance, enabled modulus and damping to be determined over a wide range of temperatures and frequencies. This apparatus has commercial value since it is not restricted to friction material testing. Both used and unused pads were tested and although the cause of brake squeal was not definitely established, the results enabled formulation of a tentative theory of the possible conditions for brake squeal. The presence of a temperature of minimum damping was indicated which may be of use to braking design engineers. Some auxilIary testing was also performed to establish the effect of water, oil and brake fluid and also to determine the effect of the various components of friction materials.

The effect of flying and low humidity on the admittance of the tympanic membrane and middle ear system

Many passengers experience discomfort during flight because of the effect of low humidity on the skin, eyes, throat, and nose. In this physiological study, we have investigated whether flight and low humidity also affect the tympanic membrane. From previous studies, a decrease in admittance of the tympanic membrane through drying might be expected to affect the buffering capacity of the middle ear and to disrupt automatic pressure regulation. This investigation involved an observational study onboard an aircraft combined with experiments in an environmental chamber, where the humidity could be controlled but could not be made to be as low as during flight. For the flight study, there was a linear relationship between the peak compensated static admittance of the tympanic membrane and relative humidity with a constant of proportionality of 0.00315 mmho/% relative humidity. The low humidity at cruise altitude (minimum 22.7 %) was associated with a mean decrease in admittance of about 20 % compared with measures in the airport. From the chamber study, we further found that a mean decrease in relative humidity of 23.4 % led to a significant decrease in mean admittance by 0.11 mmho [F(1,8) = 18.95, P = 0.002], a decrease of 9.4 %. The order of magnitude for the effect of humidity was similar for the flight and environmental chamber studies. We conclude that admittance changes during flight were likely to have been caused by the low humidity in the aircraft cabin and that these changes may affect the automatic pressure regulation of the middle ear during descent. © 2013 Association for Research in Otolaryngology.

Analogue computation of the impedence of a powered flying control system

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Isolation and characterisation of bacteria associated with flying insects in hospitals, with particualr emphasis on Clostridum difficile

Clostridium difficile is a bacterial healthcare-associated infection, which houseflies Musca domestica may transfer due to their synanthropic nature. The aims of this thesis were to determine the ability of M. domestica to transfer C. difficile mechanically and to collect and identify flying insects in UK hospitals and classify any associated bacteria. M. domestica exposed to independent suspensions of vegetative cells and spores of C. difficile were able to mechanically transfer the bacteria on to agar for up to 4 hours following exposure. C. difficile could be recovered from fly excreta for 96hrs and was isolated from the M. domestica alimentary canal. Also confirmed was the carriage of C. difficile by M. domestica larvae, although it was not retained in the pupae or in the adults that subsequently developed. Flying insects were collected from ultra-violet light flytraps in hospitals. Flies (order Diptera) were the most commonly identified. Chironomidae were the most common flies, Calliphora vicina were the most common synanthropic fly and ‘drain flies’ were surprisingly numerous and represent an emerging problem in hospitals. External washings and macerates of flying insects were prepared and inoculated onto a variety of agars and following incubation bacterial colonies identified by biochemical tests. A variety of flying insects, including synanthropic flies (e.g. M. domestica and C. vicina) collected from UK hospitals harboured pathogenic bacteria of different species. Enterobacteriaceae were the group of bacteria most commonly isolated, followed by Bacillus spp, Staphylococci, Clostridia, Streptococci and Micrococcus spp. This study highlights the potential for M. domestica to contribute to environmental persistence and spread of C. difficile in hospitals. Also illustrated is the potential for flying insects to contribute to environmental persistence and spread of other pathogenic bacteria in hospitals and therefore the need to implement pest control as part of infection control strategies.

Large-volume metrology instrument selection and measurability analysis

A wide range of metrology processes are involved in the manufacture of large products. In addition to the traditional tool-setting and product-verification operations, increasingly flexible metrology-enabled automation is also being used. Faced with many possible measurement problems and a very large number of metrology instruments employing diverse technologies, the selection of the appropriate instrument for a given task can be highly complex. Also, as metrology has become a key manufacturing process, it should be considered in the early stages of design, and there is currently very little research to support this. This paper provides an overview of the important selection criteria for typical measurement processes and presents some novel selection strategies. Metrics that can be used to assess measurability are also discussed. A prototype instrument selection and measurability analysis application is also presented, with discussion of how this can be used as the basis for development of a more sophisticated measurement planning tool. © 2010 Authors.

Naturally occurring data as research instrument:analyzing examination responses to study the novice programmer

In New Zealand and Australia, the BRACElet project has been investigating students' acquisition of programming skills in introductory programming courses. The project has explored students' skills in basic syntax, tracing code, understanding code, and writing code, seeking to establish the relationships between these skills. This ITiCSE working group report presents the most recent step in the BRACElet project, which includes replication of earlier analysis using a far broader pool of naturally occurring data, refinement of the SOLO taxonomy in code-explaining questions, extension of the taxonomy to code-writing questions, extension of some earlier studies on students' 'doodling' while answering exam questions, and exploration of a further theoretical basis for work that until now has been primarily empirical.

Development and validation of an instrument to predict online student success using faculty perceptions

Distance learning is growing and transforming educational institutions. The increasing use of distance learning by higher education institutions and particularly community colleges coupled with the higher level of student attrition in online courses than in traditional classrooms suggests that increased attention should be paid to factors that affect online student course completion. The purpose of the study was to develop and validate an instrument to predict community college online student course completion based on faculty perceptions, yielding a prediction model of online course completion rates. Social Presence and Media Richness theories were used to develop a theoretically-driven measure of online course completion. This research study involved surveying 311 community college faculty who taught at least one online course in the past 2 years. Email addresses of participating faculty were provided by two south Florida community colleges. Each participant was contacted through email, and a link to an Internet survey was given. The survey response rate was 63% (192 out of 303 available questionnaires). Data were analyzed through factor analysis, alpha reliability, and multiple regression. The exploratory factor analysis using principal component analysis with varimax rotation yielded a four-factor solution that accounted for 48.8% of the variance. Consistent with Social Presence theory, the factors with their percent of variance in parentheses were: immediacy (21.2%), technological immediacy (11.0%), online communication and interactivity (10.3%), and intimacy (6.3%). Internal consistency of the four factors was calculated using Cronbach's alpha (1951) with reliability coefficients ranging between .680 and .828. Multiple regression analysis yielded a model that significantly predicted 11% of the variance of the dependent variable, the percentage of student who completed the online course. As indicated in the literature (Johnson & Keil, 2002; Newberry, 2002), Media Richness theory appears to be closely related to Social Presence theory. However, elements from this theory did not emerge in the factor analysis.

Development of a new student evaluation instrument of instructor effectiveness in online courses

The purpose of this study was to (a) develop an evaluation instrument capable of rating students' perceptions of the instructional quality of an online course and the instructor’s performance, and (b) validate the proposed instrument with a study conducted at a major public university. The instrument was based upon the Seven Principles of Good Practice for Undergraduate Education (Chickering & Gamson, 1987). The study examined four specific questions. 1. Is the underlying factor structure of the new instrument consistent with Chickering and Gamson's Seven Principles? 2. Is the factor structure of the new instrument invariant for male and female students? 3. Are the scores on the new instrument related students’ expected grades? 4. Are the scores on the new instrument related to the students' perceived course workload? ^ The instrument was designed to measure students’ levels of satisfaction with their instruction, and also gathered information concerning the students’ sex, the expected grade in the course, and the students’ perceptions of the amount of work required by the course. A cluster sample consisting of an array of online courses across the disciplines yielded a total 297 students who responded to the online survey. The students for each course selected were asked to rate their instructors with the newly developed instrument. ^ Question 1 was answered using exploratory factor analysis, and yielded a factor structure similar to the Seven Principles.^ Question 2 was answered by separately factor-analyzing the responses of male and female students and comparing the factor structures. The resulting factor structures for men and women were different. However, 14 items could be realigned under five factors that paralleled some of the Seven Principles. When the scores of only those 14 items were entered in two principal components factor analyses using only men and only women, respectively and restricting the factor structure to five factors, the factor structures were the same for men and women.^ A weak positive relationship between students’ expected grades and their scores on the instrument was found (Question 3). There was no relationship between students’ perceived workloads for the course and their scores on the instrument (Question 4).^

Development of an instrument to measure high school students' global awareness and attitudes: Looking through the lens of social sciences

The purpose of this study was to develop an instrument to measure high school students’ perspectives on global awareness and attitudes toward social issues. The research questions that guided this study were: (a) Can acceptable validity and reliability estimates be established for an instrument developed to measure high schools students' global awareness? (b) Can acceptable validity and reliability estimates be established for an instrument developed to measure high schools students' attitudes towards global social issues? (c) What is the relationship between high school students’ GPA, race/ethnicity, gender, socio-economic status, parents’ education, getting the news, reading and listening habits, the number of classes taken in the social sciences, whether they speak a second language, and have experienced living in or visiting other countries, and their perception of global awareness and attitudes toward global social issues. ^ An ex post facto research design was used and the data were collected using a 4-part Likert-type survey. It was administered to 14 schools in the Miami-Dade County, Florida area to 704 students. A factor analysis with an orthogonal varimax rotation was vii used to select the factors that best represented the three constructs – global education, global citizenship, and global workforce. This was done to establish construct validity. Cronbach’s alpha was used to determine the reliability of the instrument. Descriptive statistics and a hierarchical multiple regression were used for the demographics to establish their relationship, if any, to the findings. ^ Key findings of the study were that reliable and valid estimates can be developed for the instrument. The multiple regression analysis for model 1 and 2 accounted for a variance of 3% and 5% for self-perceptions of global awareness (factor 1). The regression model also accounted for a 5% and 13% variance in the two models for attitudes toward global social issues (factor 2). The demographics that were statistically significant were: ethnicity, gender, SES, parents’ education, listening to music, getting the news, speaking a second language, GPA, classes taken in the social sciences, and visiting other countries. An important finding for the study was those attending public schools (as opposed to private schools) had more positive attitudes towards global social issues (factor 2) The statistics indicated that these students had taken history, economics, and social studies – a curriculum infused with global perspectives.^

Development of Knowledge Domains and an Instrument to Assess Probation Officers’ Knowledge of Offenders with Intellectual Disabilities

The purpose of this study was to develop knowledge domains and an instrument to assess probation officers’ knowledge levels of offenders with intellectual disabilities by utilizing a synthesis of subject matter analysis technique and a comprehensive review of literature. Results can be used to develop effective training for probation officers.

Developing a process to create and validate an instrument assessing student attainment of competencies at an intercultural university in Mexico

This study took place at one of the intercultural universities (IUs) of Mexico that serve primarily indigenous students. The IUs are pioneers in higher education despite their numerous challenges (Bertely, 1998; Dietz, 2008; Pineda & Landorf, 2010; Schmelkes, 2009). To overcome educational inequalities among their students (Ahuja, Berumen, Casillas, Crispín, Delgado et al., 2004; Schmelkes, 2009), the IUs have embraced performance-based assessment (PBA; Casillas & Santini, 2006). PBA allows a shared model of power and control related to learning and evaluation (Anderson, 1998). While conducting a review on PBA strategies of the IUs, the researcher did not find a PBA instrument with valid and reliable estimates. The purpose of this study was to develop a process to create a PBA instrument, an analytic general rubric, with acceptable validity and reliability estimates to assess students' attainment of competencies in one of the IU's majors, Intercultural Development Management. The Human Capabilities Approach (HCA) was the theoretical framework and a sequential mixed method (Creswell, 2003; Teddlie & Tashakkori, 2009) was the research design. IU participants created a rubric during two focus groups, and seven Spanish-speaking professors in Mexico and the US piloted using students' research projects. The evidence that demonstrates the attainment of competencies at the IU is a complex set of actual, potential and/or desired performances or achievements, also conceptualized as "functional capabilities" (FCs; Walker, 2008), that can be used to develop a rubric. Results indicate that the rubric's validity and reliability estimates reached acceptable estimates of 80% agreement, surpassing minimum requirements (Newman, Newman, & Newman, 2011). Implications for practice involve the use of PBA within a formative assessment framework, and dynamic inclusion of constituencies. Recommendations for further research include introducing this study's instrument-development process to other IUs, conducting parallel mixed design studies exploring the intersection between HCA and assessment, and conducting a case study exploring assessment in intercultural settings. Education articulated through the HCA empowers students (Unterhalter & Brighouse, 2007; Walker, 2008). This study aimed to contribute to the quality of student learning assessment at the IUs by providing a participatory process to develop a PBA instrument.

Authentic Experiences Assessment Instrument: The Case of Millennial Students and Cultural Attractions in Central Florida

Three types of authenticity were chosen to analyze cultural attractions—they were: staged or real authenticity, sensory authenticity, and existential authenticity. A group of millennium students that visited Orlando’s cultural attractions from the University of Central Florida were part of this study. Results show that the term “culture” is unclear among students. Also gender might play a role in determining what is perceived as “authenticity.” In general the focus group discussion had a consensus that these three types of authenticity were the right ones to measured cultural attractions, people, and behaviors.

The *validation of an instrument for the assessment of study behaviors of high school students

The purpose of this study is to validate the Study Behavior Inventory-High School, an instrument designed to measure study behaviors of high school students and to determine the stability of its scores across populations and across grades. Numerous studies have shown the relationship between the level of students' use of appropriate study behaviors and their levels of academic achievement and this is particularly relevant at a time of increasing demands for school and teacher accountability for their students' academic achievement. ^ The instrument was administered to 3,336 students in grades 9 through 12 in four high schools in diverse parts of the United States. Factor analysis yielded a four factor structure for the instrument and evidence for its construct validity was obtained using convergent and discriminant methods. The four factors include academic self-perception and feelings of low self-efficacy, academic preparation behaviors, time management, and the social nature of taking tests and studying. Internal consistency reliability for the scores on each of the four factors was calculated and found to range between .68 and .87. Finally, confirmatory factor analysis indicated acceptable levels of fit between the factor structure obtained in this study and an earlier one obtained during a pilot study using 800 participants. ^ The SBI-HS appears to be a valid and reliable instrument for the measure of study behaviors in high school students. ^

The relationship between higher education curricular variables and human flight performance in a preliminary flying training program

The ability of the United States Air Force (USAF) to sustain a high level of operational ability and readiness is dependent on the proficiency and expertise of its pilots. Recruitment, education, training, and retention of its pilot force are crucial factors in the USAF's attainment of its operational mission: defense of this nation and its allies. Failure of a student pilot during a training program does not only represent a loss of costly training expenditures to the American public, but often consists of loss of human life, aircraft, and property. This research focused on the Air Force Reserve Officer Training Corps' (AFROTC) selection method for student pilots for the light aircraft training (LATR) program. The LATR program is an intense 16 day flight training program that precedes the Air Force's undergraduate pilot training (UPT) program. The study subjects were 265 AFROTC cadets in the LATR program. A variety of independent variables from each subject's higher education curricular background as well as results of preselection tests, participation in varsity athletics, prior flying experience and gender were evaluated against subsequent performance in LATR. Performance was measured by a quantitative performance score developed by this researcher based on 28 graded training factors as well as overall pass or fail of the LATR program. Study results showed participation in university varsity athletics was very significantly and positively related to performance in the LATR program, followed by prior flying experience and to a very slight degree portions of the Air Force Officers Qualifying Test. Not significantly related to success in the LATR program were independent variables such as grade point average, scholastic aptitude test scores, academic major, gender and the AFROTC selection and ranking system.