O efeito da deposição salina nas características das escorrências rodoviárias em zonas costeiras

Tese de Doutoramento em Engenharia Civil.

Aromatic amines sources, environmental impact and remediation

Aromatic amines are widely used industrial chemicals as their major sources in the environment include several chemical industry sectors such as oil refining, synthetic polymers, dyes, adhesives, rubbers, perfume, pharmaceuticals, pesticides and explosives. They result also from diesel exhaust, combustion of wood chips and rubber and tobacco smoke. Some types of aromatic amines are generated during cooking, special grilled meat and fish, as well. The intensive use and production of these compounds explains its occurrence in the environment such as in air, water and soil, thereby creating a potential for human exposure. Since aromatic amines are potential carcinogenic and toxic agents, they constitute an important class of environmental pollutants of enormous concern, which efficient removal is a crucial task for researchers, so several methods have been investigated and applied. In this chapter the types and general properties of aromatic amine compounds are reviewed. As aromatic amines are continuously entering the environment from various sources and have been designated as high priority pollutants, their presence in the environment must be monitored at concentration levels lower than 30 mg L1, compatible with the limits allowed by the regulations. Consequently, most relevant analytical methods to detect the aromatic amines composition in environmental matrices, and for monitoring their degradation, are essential and will be presented. Those include Spectroscopy, namely UV/visible and Fourier Transform Infrared Spectroscopy (FTIR); Chromatography, in particular Thin Layer (TLC), High Performance Liquid (HPLC) and Gas chromatography (GC); Capillary electrophoresis (CE); Mass spectrometry (MS) and combination of different methods including GC-MS, HPLC-MS and CE-MS. Choosing the best methods depend on their availability, costs, detection limit and sample concentration, which sometimes need to be concentrate or pretreated. However, combined methods may give more complete results based on the complementary information. The environmental impact, toxicity and carcinogenicity of many aromatic amines have been reported and are emphasized in this chapter too. Lately, the conventional aromatic amines degradation and the alternative biodegradation processes are highlighted. Parameters affecting biodegradation, role of different electron acceptors in aerobic and anaerobic biodegradation and kinetics are discussed. Conventional processes including extraction, adsorption onto activated carbon, chemical oxidation, advanced oxidation, electrochemical techniques and irradiation suffer from drawbacks including high costs, formation of hazardous by-products and low efficiency. Biological processes, taking advantage of the naturally processes occurring in environment, have been developed and tested, proved as an economic, energy efficient and environmentally feasible alternative. Aerobic biodegradation is one of the most promising techniques for aromatic amines remediation, but has the drawback of aromatic amines autooxidation once they are exposed to oxygen, instead of their degradation. Higher costs, especially due to power consumption for aeration, can also limit its application. Anaerobic degradation technology is the novel path for treatment of a wide variety of aromatic amines, including industrial wastewater, and will be discussed. However, some are difficult to degrade under anaerobic conditions and, thus, other electron acceptors such as nitrate, iron, sulphate, manganese and carbonate have, alternatively, been tested.

Persistent organic chemicals of emerging environmental concern

The use of chemicals and chemical derivatives in agriculture and industry has contributed to their accumulation and persistence in the environment. Persistent organic pollutants (POPs) are among the environmental pollutants of most concern since, when improperly handled and disposed, they can persist in the environment, bioaccumulate through the food web, and may create serious public health and environmental problems. Development of an effective degradation process has become an area of intense research. The physical/chemical methods employed, such as volatilization, evaporation, photooxidation, adsorption, or hydrolysis, are not always effective, are very expensive, and, sometimes, lead to generation/disposal of other contaminants. Biodegradation is one of the major mechanisms by which organic contaminants are transformed, immobilized, or mineralized in the environment. A clear understanding of the major processes that affect the interactions between organic contaminants, microorganisms, and environmental matrix is, thus, important for determining persistence of the compounds, for predicting in situ transformation rates, and for developing site remediation. Information on their risks and impact and occurrence in the different environmental matrices is also important, in order to attenuate their impact and apply the appropriate remediation process. This chapter provides information on the fate of pesticides and polycyclic aromatic hydrocarbons (PAHs), their impact, bioavailability, and biodegradation. © Springer Science+Business Media Dordrecht 2014.

Avaliação da toxicidade das águas do rio Cubatão (Norte) - Joinville, SC, com base em ensaios ecotoxicológicos com Daphnia magna

Dissertação de mestrado em Ecologia

Glazing daylighting performance and Trombe wall thermal performance of a modular façade system in four different Portuguese cities

This paper reports on a new façade system that uses passive solutions in the search for energy efficiency. The differentials are the versatility and flexibility of the modules, which are important advantages of the system. The thermal performance of Trombe walls and glazings and the daylighting performance of glazing were the key aspects analyzed in the results. Computational simulations were accomplished for the thermal performance of different arrangements of the modules with DesignBuilder software. The glazing daylighting performance was studied by means of Ecotect and Desktop Radiance programs and compared with the transmittance curves of glazings. Occupancy profile and internal gains were fixed according to the Portuguese reality for both studies. The main characteristics considered in this research were the use of two double glazings, four different climates in Portugal and one and two Trombe walls in the façade. The results show an important reduction in the energy consumption with the use of Trombe walls and double self-cleaning glazing in the façade, which also presented better daylighting performance.

Avaliação do funcionamento de um motor diesel com biodiesel

Dissertação de mestrado integrado em Engenharia Mecânica

Incorporation of hybrid phase change materials in plastering mortars for increased energy efficiency in buildings

Tese de Doutoramento em Engenharia Civil.

Children's play and leisure : connections with emotional competence

O jogo e o lazer são elementos importantes para o desenvolvimento das crianças. O objetivo geral desta tese foi o de investigar o modo como o jogo e o lazer estão relacionados com diferentes aspetos das competências emocional e social das crianças e jovens. Nesta tese foram investigados três aspetos do jogo: o tempo, a forma e o nível social, diferentes formas de lazer, e vários elementos chave do funcionamento sócio-emocional, através da combinação de observações naturalistas, tarefas, questionários e de um método inovador de mensuração, baseado em Identificação por Rádio-Frequência. O panorama que surge dos estudos incluídos nesta tese é que o jogo e o lazer estão relacionados com o funcionamento sócio-emocional, embora de formas distintas, e por vezes inesperadas. Os estudos no recreio revelaram que as crianças envolvem-se predominantemente no jogo de atividade física. Contudo, enquanto que uma forma de jogo de atividade física, o jogo de exercício, foi associado a melhor competência social, a outra forma, o jogo de luta-e-perseguição, foi associado à agressividade. O facto de o jogo de faz-de-conta, em estudos anteriores, ter sido maioritariamente estudado em espaços interiores, pode explicar o porquê das associações negativas encontradas entre o jogo de faz-de-conta, quer em grupo, quer solitário (nas raparigas) e a competência sócio-emocional, que contrastam com a literatura. De facto, as crianças que não conseguem juntar-se aos seus pares no jogo de exercício podem optar por esta alternativa, o que sugere que crianças socialmente competentes poderão retirar maior vantagem das oportunidades existentes, adaptando melhor os seus comportamentos de jogo. As crianças mais velhas têm geralmente mais liberdade de decisão sobre o seu tempo de lazer. Quando perguntámos às crianças mais velhas e aos adolescentes como passavam a sua semana, as atividades de ecrã destacaram-se. Contudo, as atividades de ecrã e as atividades intelectuais foram relacionadas a mais problemas de saúde mental, enquanto que as atividades desportivas foram associadas a melhor saúde mental. Concluindo, diferentes formas de jogo e de lazer podem ter diferentes funções, de uma forma positiva ou negativa, dependendo da situação em que a criança se encontra.

Biorremediación de cromo y fenol mediante la aplicación de microorganismos nativos de la Provincia de Córdoba Bioremediation of chromium and phenol by the application of native microorganisms from Córdoba Province

La contaminación ambiental por metales pesados como el cromo y por compuestos orgánicos como los fenoles es un grave problema a nivel mundial debido a su toxicidad y a sus efectos adversos sobre los seres humanos, la flora y la fauna, tanto por su acumulación en la cadena alimentaria como por su continua persistencia en el medio ambiente. En un estudio preliminar, efectuado por nuestro laboratorio, se han detectado elevados niveles de estos contaminantes en sedimentos y efluentes en zonas industriales del sur de la provincia de Córdoba, lo cual plantea la necesidad de removerlos. Entre las tecnologías disponibles, la biorremediación, que se basa en el uso de sistemas biológicos, como los microorganismos, para la detoxificación y la degradación de contaminantes, se presenta como una alternativa probablemente más efectiva y de menor costo que las técnicas convencionales. Sin embargo, la aplicación de esta tecnología depende en gran parte de la influencia de las características particulares y específicas de la zona a remediar. En consecuencia, en primer lugar se caracterizará la zona de muestreo y se aislarán e identificarán microorganismos nativos de la región, tolerantes a cromo y fenol, a partir de muestras de suelo, agua y sedimentos, ya que podrían constituir una adecuada herramienta biotecnológica, mejor adaptada al sitio a tratar. Posteriormente se estudiará la biorremediación de Cr y fenol utilizando dichos microorganismos, analizando su capacidad para biotransformar, bioacumular o bioadsorber a estos contaminantes, y se determinarán las condiciones óptimas para el tratamiento. Se analizarán los posibles mecanismos fisiológicos, bioquímicos y moleculares involucrados en la remediación, que constituye una etapa crucial para el diseño de una estrategia adecuada y eficiente. Finalmente, se aplicará esta tecnología a escala reactor, como una primera aproximación al tratamiento a mayor escala. De esta manera se espera reducir los niveles de estos contaminantes y así minimizar el impacto ambiental que ellos producen en suelos y acuíferos. A futuro, la utilización de los microorganismos seleccionados, de manera individual o formando consorcios, para el tratamiento de efluentes industriales previa liberación al medio ambiente, o su uso en bioaumento, constituirían posibles alternativas de aplicación. Los principales impactos científico-tecnológicos del proyecto serán: (a) la generación de una nueva tecnología biológica de decontaminación de cromo y fenol, intentando presentar soluciones frente a una problemática ambiental que afecta a nuestra región, pero que además es común a la mayoría de los países, (b) la formación de nuevos recursos humanos en el área y (c) el trabajo en colaboración con otros grupos de investigación que se destacan en el área de biotecnología ambiental. Environmental pollution produced by heavy metals, such as chromium and organic compounds like phenolics is a serious global problem due to their toxicity, their adverse effects on human life, plants and animals, their accumulation in the food chains and also by their persistance in the environment. In a previous study performed in our laboratory, high levels of these pollutants were detected in sediments and effluents from industrial zones of the south of Cordoba Province, which determine the need to remove them. Among various technologies, bioremediation which is based on the use of biological systems, such as microorganisms, to detoxify and to degrade contaminants, is probably the most effective alternative, and it is less expensive than other conventional technologies. However, the application of this technology depends on the influence of the particular and specific characteristics of the zone to be remediate. As a consecuence, at the first time, the zone of sampling will be characterized and then, native microorganisms, tolerant to chromium and phenol, will be isolated from soils, water and sediments and identificated. These microorganisms would be an adequate biotechnological tool, more adapted to the conditions of the site to be remediate than other ones. Then, the ability of these selected microorganisms to biotransform, bioaccumulate or biosorbe chromium and phenol will be studied and the optimal conditions for the treatment will be determined. The possible physiological, biochemical and molecular mechanisms involved in bioremediation will be also analized, because this is a crucial step in the design of an adequate and efficient remediation strategy. Finally, this technology will be applied in a reactor, as an approximation to the treatment at a major scale. A reduction in the levels of these pollutants will be expected, to minimize their environmental impact on soils and aquifers.

Aproximación al diseño de sistemas de bio-reactores para la delignificación de materiales lignocelulósicos y para la decontaminación de suelos y efluentes. Approximation to the design of bio-reactors systems for the delignificación of lignocellulosic materials and for the decontamination of soil and effluents

Los materiales lignocelulósicos residuales de las actividades agroindustriales pueden ser aprovechados como fuente de lignina, hemicelulosa y celulosa. El tratamiento químico del material lignocelulósico se debe enfrentar al hecho de que dicho material es bastante recalcitrante a tal ataque, fundamentalmente debido a la presencia del polímero lignina. Esto se puede lograr también utilizando hongos de la podredumbre blanca de la madera. Estos producen enzimas lignolíticas extracelulares fundamentalmente Lacasa, que oxida la lignina a CO2. Tambien oxida un amplio rango de sustratos ( fenoles, polifenoles, anilinas, aril-diaminas, fenoles metoxi-sustituídos, y otros), lo cual es una buena razón de su atracción para aplicaciones biotecnológicas. La enzima tiene potencial aplicación en procesos tales como en la delignificación de materiales lignocelulósicos y en el bioblanqueado de pulpas para papel, en el tratamiento de aguas residuales de plantas industriales, en la modificación de fibras y decoloración en industrias textiles y de colorantes, en el mejoramiento de alimentos para animales, en la detoxificación de polutantes y en bioremediación de suelos contaminados. También se la ha utilizado en Q.Orgánica para la oxidación de grupos funcionales, en la formación de enlaces carbono- nitrógeno y en la síntesis de productos naturales complejos. HIPOTESIS: Los hongos de podredumbre blanca, y en condiciones óptimas de cultivo producen distintos tipos de enzimas oxidasas, siendo las lacasas las más adecuadas para explorarlas como catalizadores en los siguientes procesos:  Delignificación de residuos de la industria forestal con el fin de aprovechar tales desechos en la alimentación animal.  Decontaminación/remediación de suelos y/o efluentes industriales. Se realizarán los estudios para el diseño de bio-reactores que permitan responder a las dos cuestiones planteadas en la hipótesis. Para el proceso de delignificación de material lignocelulósico se proponen dos estrategias: 1- tratar el material con el micelio del hongo adecuando la provisión de nutrientes para un desarrollo sostenido y favorecer la liberación de la enzima. 2- Utilizar la enzima lacasa parcialmente purificada acoplada a un sistema mediador para oxidar los compuestos polifenólicos. Para el proceso de decontaminación/remediación de suelos y/o efluentes industriales se trabajará también en dos frentes: 3) por un lado, se ha descripto que existe una correlación positiva entre la actividad de algunas enzimas presentes en el suelo y la fertilidad. En este sentido se conoce que un sistema enzimático, tentativamente identificado como una lacasa de origen microbiano es responsable de la transformación de compuestos orgánicos en el suelo. La enzima protege al suelo de la acumulación de compuestos orgánicos peligrosos catalizando reacciones que involucran degradación, polimerización e incorporación a complejos del ácido húmico. Se utilizarán suelos incorporados con distintos polutantes(por ej. policlorofenoles ó cloroanilinas.) 4) Se trabajará con efluentes industriales contaminantes (alpechínes y/o el efluente líquido del proceso de desamargado de las aceitunas). The lignocellulosic raw materials of the agroindustrial activities can be taken advantage as source of lignin, hemicellulose and cellulose. The chemical treatment of this material is not easy because the above mentioned material is recalcitrant enough to such an assault, due to the presence of the lignin. This can be achieved also using the white-rot fungi of the wood. It produces extracellular ligninolitic enzymes, fundamentally Laccase, which oxidizes the lignin to CO2. The enzyme has application in such processes as in the delignification of lignocellulosic materials and in the biobleaching of fibers for paper industry, in the treatment of waste water of industrial plants, in the discoloration in textile industries, in the improvement of food for ruminants, in the detoxification of polutants and in bioremediation of contaminated soils. HYPOTHESIS: The white-rot fungi produce different types of enzymes, being the laccases the most adapted to explore them as catalysts in the following processes:  Delignification of residues of the forest industry in order to take advantage of such waste in the animal feed.  Decontamination of soils and / or waste waters. The studies will be conducted for the design of bio reactors that allow to answer to both questions raised in the hypothesis. For the delignification process of lignocellulosic material they propose two strategies: 1- to treat the material with the fungi 2-to use the partially purified enzyme to oxidize the polyphenolic compounds. For the soil and/or waste water decontamination process, we have: 3- Is know that the enzyme protects to the soil of the accumulation of organic dangerous compounds catalyzing reactions that involve degradation, polymerization and incorporation to complexes of the humic acid. There will be use soils incorporated into different pollutants. 4- We will work with waste waters (alpechins or the green olive debittering effluents.

Degradación de efluentes de las industrias del cuero y textil mediante procesos fotocatalíticos heterogéneos empleando la luz solar. Degradation of effluents from the leather and textile industries through heterogeneous photocatalytic processes using sunlight.

El creciente desarrollo de la industria del cuero y textil en nuestro país, y específicamente en la provincia de Córdoba, ha hecho resurgir en los ultimos años una problemática aún no resuelta que es la elevada contaminación de los recursos hídricos. En ambas industrias, la operación de teñido involucra principalmente colorantes de tipo azoico los cuales son "no biodegradables" y se fragmentan liberando aminas aromáticas cancerígenas. Para abordar esta problemática, la fotocatálisis heterogénea aparece como una nueva tecnología que permitiría la completa mineralización de estos colorantes. A través de radiación y un fotocatalizador sólido adecuado se pueden generan radicales libres eficientes para la oxidación de materia orgánica (colorantes) en medio acuoso. En este sentido, se proponen tamices moleculares mesoporosos modificados con metales de transición (MT) como fotocatalizadores potencialmente aptos para la degradación de estos contaminantes. El propósito principal de este proyecto es el diseño, síntesis, caracterización y evaluación de materiales mesoporosos que presenten actividad fotocatalítica ya sea mediante la modificación de su estructura con diversos metales fotosensibles y/o empleándolos como soporte de óxido de titanio. Se pretende evaluar estos materiales en la degradación de colorantes intentando desplazar su fotosensibilidad hacia la radiación visible para desarrollar nuevas tecnologías con menor impacto ambiental y mayor aprovechamiento de la energía solar. Para ello se sintetizarán materiales del tipo MCM-41 modificados con distintos MT tales como Fe, Cr, Co, Ni y Zn mediante incorporación directa del ión metálico o impregnación. Al mismo tiempo, tanto estos últimos materiales como el MCM-41 silíceo serán empleados como soporte de TiO2. Sus propiedades fisicoquímicas se caracterizarán mediante distintas técnicas instrumentales y su actividad fotocatalítica se evaluará en la degradación de colorantes azoicos bajo radiación visible. Se seleccionará el catalizador más eficiente y se estudiarán los diversos factores que afectan el proceso de fotodegradación. Así mismo, el análisis de la concentración del colorante y los productos presentes en el medio en función del tiempo de reacción permitirá inferir sobre la cinética de la decoloración y postular posibles mecanismos de fotodegradación. Con esta propuesta se espera contribuír al desarrollo de un sector industrial importante en nuestra provincia como es el de las industrias del cuero y textil, mediante la generación de nuevas tecnologías que empleen la energía solar para la degradación de sus efluentes (colorantes). En este sentido, se espera desarrollar nuevos materiales optimizados para lograr la mayor eficiencia fotocatalítica. Esto conduciría entonces hacia la remediación de un problema ambiental de alto impacto tanto para nuestra provincia y nuestro país como para la población mundial, como es la contaminación de los recursos hídricos. Finalmente, con este proyecto se contribuirá a la formación de dos doctorandos y un maestrando, cuyos temas de tesis están vinculados con nuestro objeto de estudio. The increasing development of the textile and leather industries in our country, and specifically in Córdoba, has revived an unresolved problem that is the high contamination of water resources. In both industries, the dyeing involves mainly type azoic dyes which are not biodegradable and break releasing carcinogenic aromatic amines. Heterogeneous photocatalysis appears as a new technology that would allow the complete mineralization of these pollutants. Through radiation and a suitable solid it is possible to generate free radicals for efficient oxidation of organic matter (dyes) in aqueous medium. In this respect, mesoporous molecular sieves modified with transition metals are proposed as potential photocatalysts. The main purpose of this project is the synthesis of mesoporous materials having photocatalytic activity for the degradation of dyes. We will try to move their photosensitivity to visible radiation to develop new technologies with lower environmental impact and greater use of solar energy. Materials MCM-41 modified with metals (Fe, Cr, Co, Ni and Zn) will be synthesized by direct incorporation or impregnation. These materials and the siliceous MCM-41 will be then employed as support of TiO2. The materials will be evaluated in the photocatalytic degradation of azoic dyes under visible radiation. The influence of different factors on the photodegradation proccess will be studied. Kinetic studies will be carried out and a possible reaction way will be proposed. Thus, this work will contribute to the advancement of an important industrial sector and the remediation of an environmental problem with high impact for our province and our country. Moreover, this proyect will contribute to the development of two doctoral tesis and one magister tesis which are vinculated with our study subject.

An evaluation of septic tank effluent movement in soil and groundwater systems

Recent studies have shown that septic tank systems are a major source of groundwater pollution. Many public health workers feel that the most cri^cal aspect of the use of septic tanks as a means of sewage disposal is the contamination of private water wells with attendant human health hazards. In this study the movement and attenuation of septic tank effluents in a range of soil/overburden types and hydrogeological situations was investigated. The suitability of a number of chemical and biological tracer materials to monitor the movement of septic tank effluent constituents to groundwater sources was also examined. The investigation was divided into three separate but inteiTelated sections. In the first section of the study the movement of septic tank effluent from two soil treatment systems was investigated by direct measurements of soil nutrient concentrations and enteric bacterial numbers in the soil beneath and downgradient of the test systems. Two sites with different soil types and hydrogeological characteristics were used. The results indicated that the attenuation of the effluent in both of the treatment systems was incomplete. Migration of nitrate, ammonium, phosphate and fecal bacteria to a depth of 50 cm beneath the inverts of the distribution tiles was demonstrated on all sampling occasions. The lateral migration of the pollutants was less pronounced, although on occasions high nutrients levels and fecal bacterial numbers were detected at a lateral distance of 4.0 m downgradient of the test systems. There was evidence that the degree and extent of effluent migration was increased after periods of heavy or prolonged rainfall when the attenuating properties of the treatment systems were reduced as a result of saturation of the soil. The second part of the study examined the contamination of groundwaters downgradient of septic tank soil treatment systems. Three test sites were used in the investigation. The sites were chosen because of differences in the thicknesses and nature of the unsaturated zone available for effluent attenuation at each of the locations. A series of groundwater monitoring boreholes were installed downgradient of the test systems at each of the sites and these were sampled regularly to assess the efficiency of the overburden material in reducing the polluting potential of the wastewater. Effluent attenuation in the septic tank treatment systems was shown to be incomplete, resulting in chemical and microbiological contamination of the groundwaters downgradient of the systems. The nature and severity of groundwater contamination was dependent on the composition and thickness of the unsaturated zone and the extent of weathering in the underlying saturated bedrock. The movement of septic tank effluent through soil/overburdens to groundwater sources was investigated by adding a range of chemical and biological tracer materials to the three septic tank systems used in section two of the study. The results demonstrated that a single tracer type cannot be used to accurately monitor the movement of all effluent constituents through soils to groundwater. The combined use of lithium bromide and endospores of Bacillus globigii was found to give an accurate indication of the movement of both the chemical and biological effluent constituents.

A nutrient balance model for typical Irish farming systems

The twin objectives of the work described were to construct nutrient balance models (NBM) for a range of Irish animal production systems and to evaluate their potential as a means of estimating the nutrient composition of farm wastes. The NBM has three components. The first is the intake of nutrients in the animal's diet. The second is retention or the nutrients the animal retains for the production of milk, meat or eggs. The third is the balance or the difference between the nutrient intake and retention. Data on the intake levels and their nutrient value for dairy cows, beef cattle, pigs and poultry systems were assembled. Literature searches and interviews with National experts were the primary sources of information. NBMs were then constructed for each production system. Summary tables of the nutrient values for the common diet constituents used in Irish animal production systems, the nutrient composition of the animal products and the NBMs (nutrient intake, retention and excretion) for a range of production systems were assembled. These represent the first comprehensive data set of this type for Irish animal production systems. There was generally good agreement between the derived NBMs values and those published in the literature. The NBMs were validated on a number of farms. Data on animal numbers, fertiliser use, concentrates inputs and production output were recorded on seven farms. Using the data a nutrient input/output balance was constructed for each farm. This was compared with the NBM estimate of the farm nutrient balance. The results showed good agreement between the measured balance and the NBM estimate particularly for the pig and poultry farms. However, the validation emphasised the inherent risks associated with NBMs. The average values used for feed intake and production parameters in the NEMs may result in the under or over estimate of actual nutrient balances on individual farms where these variables are substantially different. On the grassland farms there was a poor correlation between the input/output estimate and the NBM. This possibly results from the omission of the soil's contribution to the nutrient balance. However, the results indicate that the NBMs developed are a potentially useful tool for estimating nutrient balances. They also will serve to highlight the significant fraction of the nutrient inputs into farming systems that are retained on the farm. The potential of the NBM as a means of estimating the nutrient composition of farm wastes was evaluated on two farms. Feed intake and composition, animal production, slurry production was monitored during the indoor winter feeding period. Slurry samples were taken for analysis. The appropriates NBMs were used to estimate the nutrient balance for each farm. The nutrient content of the slurry produced was calculated. There was a good agreement between the NBM estimate and the measured values. This preliminary evaluation suggests that the NBM has a potential to provide the farmer with a simple means of estimating the nutrient value of his slurry.

Enhancing the performance of spread spectrum techniques in different applications

Spread spectrum, Automotive Radar, Indoor Positioning Systems, Ultrasonic and Microwave Imaging, super resolution technique and wavelet transform