Ageing on commercial automotive catalysts, a structure reactivity study

Increasingly stringed regulations for diesel engine emissions have a significant impact on the required efficiency of DOC. Lowered DOC oxidation efficiency due to thermal aging effects influences the efficiency of the exhaust aftertreatment systems downstream of the DOC. In this work carried out in the Jean Le Rond d’Alembert Institute the effect of hydrothermal aging on the reactivity and structure of a commercial DOC was investigated. The characterization of the catalytic performance was carried out on a synthetic gas bench using carrots catalyst under conditions close to the realistic conditions i.e. using a synthetic gas mixture, representative of the exhaust gases from diesel engines. Different structural characterization techniques were performed: textural and morphological proprieties were analyzed by BET and TEM, the characterization of the presented crystallographic phases was performed by DRX and the determination of the number of reducible species was possible by TPR. TEM results shown, an increase of the metal particle size with the aging caused by the agglomeration of metal particles, revealing the presence of metal sintering. DRX results also suggest the presence of support sintering. Furthermore, DRX and BET results unexpectedly reveal that the most drastic aging conditions used actually activated the catalyst surface. As expected, the aging affected negatively the catalyst performance on the oxidation of methane and CO, however an improvement of the NO oxidation performance with the aging was observed. Nevertheless, for the aging conditions used, catalytic activity results show that the influence of aging in DOC performance was not significant, and therefore, more drastic aging conditions must be used.

Efectividade e volume: uma aplicação a hospitais portugueses

RESUMO - Contexto: a avaliação da qualidade como tema potencialmente importante para utentes e prestadores de cuidados de saúde. A taxa de mortalidade como medida de resultados com um adequado ajustamento do risco. A existência de determinadas características estruturais do hospital às quais está associada uma menor mortalidade. Objectivos: identificar diferenças no desempenho e na taxa de mortalidade dos hospitais e investigar que características estruturais justificam essas diferenças. Metodologia: foram seleccionados os episódios de internamento das doenças de maior mortalidade hospitalar. A medida de desempenho considerada foi a comparação entre a mortalidade observada e a mortalidade esperada, calculada a partir da escala preditiva da mortalidade do Disease Staging, recalibrada para Portugal. A medida de desempenho foi analisada por hospital, doença e grupo de doenças. A ordenação dos hospitais pelo desempenho foi comparada com a ordenação dos hospitais pela taxa de mortalidade observada. O desempenho dentro de cada hospital foi analisado para um grupo de doenças seleccionadas. A relação entre o valor da medida de desempenho e as variáveis «número de episódios», «índice tecnológico» e «gravidade dos doentes tratados» foi analisada através da regressão linear para o conjunto dos episódios e para cada doença e grupo de doenças. Resultados: foram incluídos 379 074 episódios, agrupados em 21 doenças e 8 grupos de doenças e tratados em 81 hospitais. A taxa de mortalidade observada foi de 12%. Existiam diferenças no desempenho por hospital, alguns dos quais se destacam pelo seu melhor/pior nível de desempenho. Foram observadas as limitações da taxa de mortalidade bruta como instrumento de análise do desempenho, no contexto de hospitais com diferentes níveis de risco dos doentes tratados. Para além disso, evidenciou-se que a análise do hospital como um todo ou em cada uma das partes tem resultados distintos, dada a existência de diferentes níveis de desempenho dentro do hospital. Finalmente, verificou- se que a relação entre volume e desempenho, quando existe, é, na quase totalidade dos casos, não linear e inversa à referida na literatura.

Estudo da influência de nanotubos de carbono funcionalizados nas propriedades de revestimentos de poliuretano

Dissertação de mestrado em Propriedades e Tecnologias de Polímeros

Dependable decentralized storage management for cloud computing

The MAP-i Doctoral Program of the Universities of Minho, Aveiro and Porto.

State of the art and open questions on cathode preparation based on carbon coated lithium iron phosphate

One important component with particular relevance in battery performance is the cathode, being one of the main responsible elements for cell capacity and cycle life. Carbon coated lithium iron phosphate, C-LiFePO4, active material is one of the most promising cathode materials for the next generation of large scale lithium ion battery applications and strong research efforts are being devoted to it, due to its excellent characteristics, including high capacity, ~170 mAh/g, and safety. This review summarizes the main developments on C-LiFePO4 based cathode film preparation and performance. The effect of the binder, conductive additive, relationship between active material-binder-conductive additive and drying step, in the electrode film fabrication and performance is presented and discussed. Finally, after the presentation of the cell types fabricated with C-LiFePO4 active material and their performance, some conclusions and guidelines for further investigations are outlined.

Development of ductile cementitiuos composites using carbon nanotubes

Concrete is the primary construction material for civil infrastructures and generally consists of cement, coarse aggregates, sand, admixtures and water. Cementitious materials are characterized by quasi-brittle behaviour and susceptible to cracking [1]. The cracking process within concrete begins with isolated nano-cracks, which then conjoin to form micro-cracks and in turn macro-cracks. Formation and growth of cracks lead to loss of mechanical performance with time and also make concrete accessible to water and other degrading agents such as CO2, chlorides, sulfates, etc. leading to strength loss and corrosion of steel rebars. To improve brittleness of concrete, reinforcements such as polymeric as well as glass and carbon fibers have been used and microfibers improved the mechanical properties significantly by delaying (but could not stop) the transformation of micro-cracks into macro forms [2]. This fact encouraged the use of nano-sized fillers in concrete to prevent the growth of nano-cracks transforming in to micro and macro forms. Nanoparticles like SiO2, Fe2O3, and TiO2 led to considerable improvement in mechanical performance and moreover, nano-TiO2 helped to remove organic pollutants from concrete surfaces [3].

Testing Nelder-Mead based repulsion algorithms for multiple roots of nonlinear systems via a two-level factorial design of experiments

This paper addresses the challenging task of computing multiple roots of a system of nonlinear equations. A repulsion algorithm that invokes the Nelder-Mead (N-M) local search method and uses a penalty-type merit function based on the error function, known as 'erf', is presented. In the N-M algorithm context, different strategies are proposed to enhance the quality of the solutions and improve the overall efficiency. The main goal of this paper is to use a two-level factorial design of experiments to analyze the statistical significance of the observed differences in selected performance criteria produced when testing different strategies in the N-M based repulsion algorithm. The main goal of this paper is to use a two-level factorial design of experiments to analyze the statistical significance of the observed differences in selected performance criteria produced when testing different strategies in the N-M based repulsion algorithm.

The impact of urban noise on primary schools: perceptive evaluation and objective assessment

This paper aims to assess the impact of environmental noise in the vicinity of primary schools and to analyze its influence in the workplace and in student performance through perceptions and objective evaluation. The subjective evaluation consisted of the application of questionnaires to students and teachers, and the objective assessment consisted of measuring in situ noise levels. The survey covered nine classes located in three primary schools. Statistical Package for Social Sciences was used for data processing and to draw conclusions. Additionally, the relationship of the difference between environmental and background noise levels of each classroom and students with difficulties in hearing the teacherâ s voice was examined. Noise levels in front of the school, the schoolyard, and the most noise-exposed classrooms (occupied and unoccupied) were measured. Indoor noise levels were much higher than World Health Organization (WHO) recommended values: LAeq,30min averaged 70.5 dB(A) in occupied classrooms, and 38.6 dB(A) in unoccupied ones. Measurements of indoor and outdoor noise suggest that noise from the outside (road, schoolyard) affects the background noise level in classrooms but in varying degrees. It was concluded that the façades most exposed to road traffic noise are subjected to values higher than 55.0 dB(A), and noise levels inside the classrooms are mainly due to the schoolyard, students, and the road traffic. The difference between background (LA95,30min) and the equivalent noise levels (LAeq,30min) in occupied classrooms was 19.2 dB(A), which shows that studentsâ activities are a significant source of classroom noise.

A estimulação cognitiva através da aprendizagem mediada: uma proposta de promoção das habilidades cognitivas em crianças de meio social desfavorecido

Partindo de dois referenciais teóricos da inteligência, psicométrico e cognitivo, esta tese centra-se no conceito de modificabilidade cognitiva e nos programas de estimulação (treino) cognitiva. Em particular é feita uma descrição detalhada do Programa de Enriquecimento Instrumental-PEI (Feuerstein et al., 1980), nomeadamente alguns conceitos centrais à sua fundamentação e implementação, por exemplo a experiência de aprendizagem mediada, o mapa cognitivo e a modificação cognitiva estrutural, pois que foi o programa considerado no nosso estudo empírico. Em termos empíricos procedemos à aplicação do PEI (tarefa de organização de pontos) junto de um grupo de crianças de 10 a 13 anos, do 4º ano do ensino fundamental, provenientes de um meio sociocultural desfavorecido. Este grupo representava a globalidade de uma turma da escola escolhida (25 crianças), havendo uma outra turma similar da mesma escola que serviu de grupo de comparação (26 crianças). O plano experimental inclui uma avaliação de pré-teste e pósteste com provas cognitivas e de leitura. Igualmente foi considerado o rendimento escolar das crianças, acrescentando-se no grupo experimental uma avaliação mais qualitativa assente nas funções cognitivas, atitudes e comportamentos das crianças ao longo da realização das atividades propostas no programa de estimulação cognitiva. Os resultados obtidos apontam para um efeito benéfico do programa quando comparamos as crianças do grupo experimental e de controlo no pós-teste em termos das habilidades cognitivas e numa das provas de leitura. Igualmente se observam melhorias nas suas funções cognitivas, atitudes e comportamentos de implicação na realização das tarefas ao longo do programa, registando-se uma melhoria do pré-teste para o pós-teste no rendimento académico, contudo esta melhoria ocorre igualmente no grupo de controlo. Estes resultados são discutidos à luz da investigação sobre os programas de treino cognitivo, e em particular do PEI, retirando-se ilações para a prática educativa e para a continuidade da investigação nesta área.

A network approach to brain aging through multimodal neuroimaging

Tese de Doutoramento em Ciências da Saúde.

Is psychodynamic psychotherapy an effective intervention for individuals at ultra-high risk (UHR) of psychosis?: a case report

OBJECTIVE: To report a case and to discuss the use of psychodynamic psychotherapy (PD-P) to treat individuals at ultra-high risk (UHR) of psychosis. METHODS: An individual at UHR was followed up for 24 months. The baseline evaluation included a psychiatric interview, the Structured Interview for Prodromal Symptoms (SIPS), the Scale of Prodromal Symptoms (SOPS), and neuropsychological assessment. He underwent weekly sessions of PD-P for 12 months and was followed up for 12 months after the end of PD-P. The evaluations were at baseline, after 6-, 12-, and 24-month follow-up. No medication was prescribed during the 24-month follow-up. RESULTS: The prodromal symptoms remitted. The initial total score on the SIPS/SOPS was 37 points. After the first 12 months of PD-P, there was a reduction to 12 points on the SIPS/SOPS score, which stabilized in the 24-month follow-up. There was also a slight improvement in his performance on the neuropsychological evaluations. CONCLUSION: This case report suggests that PD-P can reduce prodromal symptoms; nevertheless, a better understanding of the specificity and efficacy of PD-P as an option of treatment for UHR individuals is needed.

Diagnóstico e ensaio de carga de asnas tradicionais de madeira

Dissertação de mestrado Integrado em Engenharia Civil

Avaliação de Desempenho e Associações de Profissionais: o poder do associativismo nos processos de avaliação de desempenho

Dissertação de mestrado em Sociologia Organizações e Trabalho

Effects of protein-calorie restriction on mechanical function of hypertrophied cardiac muscle

OBJECTIVE: To assess the effect of food restriction (FR) on hypertrophied cardiac muscle in spontaneously hypertensive rats (SHR). METHODS: Isolated papillary muscle preparations of the left ventricle (LV) of 60-day-old SHR and of normotensive Wistar-Kyoto (WKY) rats were studied. The rats were fed either an unrestricted diet or FR diet (50% of the intake of the control diet) for 30 days. The mechanical function of the muscles was evaluated through monitoring isometric and isotonic contractions. RESULTS: FR caused: 1) reduction in the body weight and LV weight of SHR and WKY rats; 2) increase in the time to peak shortening and the time to peak developed tension (DT) in the hypertrophied myocardium of the SHR; 3) diverging changes in the mechanical function of the normal cardiac muscles of WKY rats with reduction in maximum velocity of isotonic shortening and of the time for DT to decrease 50% of its maximum value, and increase of the resting tension and of the rate of tension decline. CONCLUSION: Short-term FR causes prolongation of the contraction time of hypertrophied muscles and paradoxal changes in mechanical performance of normal cardiac fibers, with worsening of the shortening indices and of the resting tension, and improvement of the isometric relaxation.

Aceleración de Algoritmos en Procesadores Multicore, GPGPU y FPGA. Algorithm Acceleration with Multicore, GPGPU and FPGA Processors.

El avance en la potencia de cómputo en nuestros días viene dado por la paralelización del procesamiento, dadas las características que disponen las nuevas arquitecturas de hardware. Utilizar convenientemente este hardware impacta en la aceleración de los algoritmos en ejecución (programas). Sin embargo, convertir de forma adecuada el algoritmo en su forma paralela es complejo, y a su vez, esta forma, es específica para cada tipo de hardware paralelo. En la actualidad los procesadores de uso general más comunes son los multicore, procesadores paralelos, también denominados Symmetric Multi-Processors (SMP). Hoy en día es difícil hallar un procesador para computadoras de escritorio que no tengan algún tipo de paralelismo del caracterizado por los SMP, siendo la tendencia de desarrollo, que cada día nos encontremos con procesadores con mayor numero de cores disponibles. Por otro lado, los dispositivos de procesamiento de video (Graphics Processor Units - GPU), a su vez, han ido desarrollando su potencia de cómputo por medio de disponer de múltiples unidades de procesamiento dentro de su composición electrónica, a tal punto que en la actualidad no es difícil encontrar placas de GPU con capacidad de 200 a 400 hilos de procesamiento paralelo. Estos procesadores son muy veloces y específicos para la tarea que fueron desarrollados, principalmente el procesamiento de video. Sin embargo, como este tipo de procesadores tiene muchos puntos en común con el procesamiento científico, estos dispositivos han ido reorientándose con el nombre de General Processing Graphics Processor Unit (GPGPU). A diferencia de los procesadores SMP señalados anteriormente, las GPGPU no son de propósito general y tienen sus complicaciones para uso general debido al límite en la cantidad de memoria que cada placa puede disponer y al tipo de procesamiento paralelo que debe realizar para poder ser productiva su utilización. Los dispositivos de lógica programable, FPGA, son dispositivos capaces de realizar grandes cantidades de operaciones en paralelo, por lo que pueden ser usados para la implementación de algoritmos específicos, aprovechando el paralelismo que estas ofrecen. Su inconveniente viene derivado de la complejidad para la programación y el testing del algoritmo instanciado en el dispositivo. Ante esta diversidad de procesadores paralelos, el objetivo de nuestro trabajo está enfocado en analizar las características especificas que cada uno de estos tienen, y su impacto en la estructura de los algoritmos para que su utilización pueda obtener rendimientos de procesamiento acordes al número de recursos utilizados y combinarlos de forma tal que su complementación sea benéfica. Específicamente, partiendo desde las características del hardware, determinar las propiedades que el algoritmo paralelo debe tener para poder ser acelerado. Las características de los algoritmos paralelos determinará a su vez cuál de estos nuevos tipos de hardware son los mas adecuados para su instanciación. En particular serán tenidos en cuenta el nivel de dependencia de datos, la necesidad de realizar sincronizaciones durante el procesamiento paralelo, el tamaño de datos a procesar y la complejidad de la programación paralela en cada tipo de hardware. Today´s advances in high-performance computing are driven by parallel processing capabilities of available hardware architectures. These architectures enable the acceleration of algorithms when thes ealgorithms are properly parallelized and exploit the specific processing power of the underneath architecture. Most current processors are targeted for general pruposes and integrate several processor cores on a single chip, resulting in what is known as a Symmetric Multiprocessing (SMP) unit. Nowadays even desktop computers make use of multicore processors. Meanwhile, the industry trend is to increase the number of integrated rocessor cores as technology matures. On the other hand, Graphics Processor Units (GPU), originally designed to handle only video processing, have emerged as interesting alternatives to implement algorithm acceleration. Current available GPUs are able to implement from 200 to 400 threads for parallel processing. Scientific computing can be implemented in these hardware thanks to the programability of new GPUs that have been denoted as General Processing Graphics Processor Units (GPGPU).However, GPGPU offer little memory with respect to that available for general-prupose processors; thus, the implementation of algorithms need to be addressed carefully. Finally, Field Programmable Gate Arrays (FPGA) are programmable devices which can implement hardware logic with low latency, high parallelism and deep pipelines. Thes devices can be used to implement specific algorithms that need to run at very high speeds. However, their programmability is harder that software approaches and debugging is typically time-consuming. In this context where several alternatives for speeding up algorithms are available, our work aims at determining the main features of thes architectures and developing the required know-how to accelerate algorithm execution on them. We look at identifying those algorithms that may fit better on a given architecture as well as compleme