Evaluation of antioxidants stability by thermal analysis and its protective effect in heated edible vegetable oil

In this work, through the use of thermal analysis techniques, the thermal stabilities of some antioxidants were investigated, in order to evaluate their resistance to thermal oxidation in oils, by heating canola vegetable oil, and to suggest that antioxidants would be more appropriate to increase the resistance of vegetable oils in the thermal degradation process in frying. The techniques used were: Thermal Gravimetric (TG) and Differential Scanning Calorimetry (DSC) analyses, as well as an allusion to a possible protective action of the vegetable oils, based on the thermal oxidation of canola vegetable oil in the laboratory under constant heating at 180 ºC/8 hours for 10 days. The studied antioxidants were: ascorbic acid, sorbic acid, citric acid, sodium erythorbate, BHT (3,5-di-tert-butyl-4-hydroxytoluene), BHA (2, 3-tert-butyl-4-methoxyphenol), TBHQ (tertiary butyl hydroquinone), PG (propyl gallate) - described as antioxidants by ANVISA and the FDA; and also the phytic acid antioxidant and the SAIB (sucrose acetate isobutyrate) additive, which is used in the food industry, in order to test its behavior as an antioxidant in vegetable oil. The following antioxidants: citric acid, sodium erythorbate, BHA, BHT, TBHQ and sorbic acid decompose at temperatures below 180 ºC, and therefore, have little protective action in vegetable oils undergoing frying processes. The antioxidants below: phytic acid, ascorbic acid and PG, are the most resistant and begin their decomposition processes at temperatures between 180 and 200 ºC. The thermal analytical techniques have also shown that the SAIB antioxidant is the most resistant to oxidative action, and it can be a useful choice in the thermal decomposition prevention of edible oils, improving stability regarding oxidative processes.

Acid and salt uptake during the marinatig process of Engraulis anchoita fillets influence of the solution: fish ratio and agitation

The aims of this research were to determine the effect of different conditions of the marination stage on the salt and acid uptake, immersion time, and sensorial characteristics during the marinating process of anchovy (Engraulis anchoita). Different solution:fish ratios and the agitation effect during this stage were analyzed. The ratios used were: 0.77:1, 3:1 and 10:1 (with and without agitation). An increase of marinating solution:fish ratio causes a higher speed of acid and salt penetration The product obtained with the 10:1 ratio had a dry and fibrous texture and a slightly salty taste. Salt concentration was statistically significantly lower (p < 0.01) in the samples with agitation. Agitation did not influence the acid uptake, and the salt penetration speed decreased, but rancidity was detected in this product. The ratio 3:1 decreases the marinating time without damaging sensory attributes and can be used in the fish marinating process.

Thermal properties of defatted meal, concentrate, and protein isolate of baru nuts (Dipteryx alata Vog.)

Baru (Dipteryx alata Vog.), a species of legume found in the Brazilian savannas, was investigated in this study for the composition of its flesh and seed. Thermal analyses, Thermogravimetry (TG), and Differential Scanning Calorimetry (DSC) were used to investigate the proteins in defatted meal, concentrate, and protein isolate. The protein concentrate was extracted at pH 10, followed by a precipitation at the isoelectric point to obtain the isolate that was spray dried. The thermogravimetric curves were obtained under a nitrogen atmosphere with a 100 mL/minutes flow. The initial, final and peak temperatures and mass loss were analyzed. Within the performed temperature ranges studied, the defatted meal and concentrate presented four steps of mass loss, while the isolate showed only two steps. The protein content of defatted meal from Baru nuts was higher than that of the isolate. On the other hand, there was a reduction in enthalpy, which suggests that the process applied to obtain the baru concentrate and isolate led to protein denaturation.

Effects of peeling methods on the quality of cubiu fruits

Cubiu (Solanum sessiliflorum Dunal) is an Amazonian Basin native fruit. Its importance comes from its high contents of pectin. Currently, processing technologies are necessary for the substitution of the traditional system (small crops and small-scale processing) for a larger scale system and thus increase the use of biodiversity and promote the implementation of Local Productive Arrangements of agribusiness in the Amazon. This research aims to evaluate the methods of peeling cubiu. Ripe fruits were divided into lots (150 each) and subjected to the following treatments: immersion in 2.5% NaOH boiling solution for 5 minutes, exposure to water vapor, and immersion in water at 96 ºC for 5, 10, 15 and 20 minutes. The peel released during heat treatment and immediately removed under running tap water. In the control treatment, the fruits were manually peeled (unheated) with a stainless steel knife. The treatments were evaluated for completeness and ease of peeling, tissue integrity, texture, and peroxidase activity. The immersion in 2.5% NaOH boiling solution (5 minutes) stood out as the best treatment since it inhibited the enzymatic browning and intensified the natural yellow color of the cubiu fruit and easily and fully peeled the whole fruit more rapidly without damaging its tissues. This treatment was chosen as the most advantageous because it can promote simultaneous peeling and bleaching. Therefore, it is recommended for cubiu industrial processing.

Dynamics of gas levels inside packages containing minimally processed Pera orange

The purpose of this study was to evaluate the changes in concentrations of O2 and CO2 inside packages of minimally processed Pera orange. Previously selected oranges that were washed, sanitized, and chilled were peeled using hydrothermal treatment (immersion of fruits in water at 50 °C for 8 minutes). The peeled oranges were then packed in five different plastic packages under passive and active modified atmosphere (5% O2 + 10% CO2 + 85% N2). The fruits were stored at 6 °C and 12 °C. The package headspace gas composition was evaluated for twelve days at 6 °C and nine days at 12 °C. The polypropylene film (32 µm) promoted modified atmosphere similar to that initially injected (5% O2 + 10% CO2 + 85% N2) at 6 °C and 12 °C. With regard to the atmosphere modification system, the injection of a gas mixture anticipated achieving an equilibrium atmosphere inside the packages at 12 °C. At 6 °C, the gas composition inside the packages was kept close to that of the injection, but the equilibrium was not verified.

Processing of chopped mussel meat in retort pouch

Abstract Chopped mussel meat packaged in retort pouches was processed in a laboratory-scale water immersion retort, adapted for processing under overpressure conditions. Retort temperature effects on product yield and on cook value were evaluated by setting the F0 at 7 min. The effects of different pre-treatments (salting and marination) on the characteristics of mussels were evaluated after processing at retort temperature of 118 °C and during a whole year of storage at 25 °C. The salted samples showed better yield during storage, while no differences were found for the other physicochemical parameters.

Responding to Changing Student Demographics in Finland: A Study of Teachers’ Developing Cultural Competence

The aim of this dissertation was to examine the skills and knowledge that pre-service teachers and teachers have and need about working with multilingual and multicultural students from immigrant backgrounds. The specific goals were to identify pre-service teachers’ and practising teachers’ current knowledge and awareness of culturally and linguistically responsive teaching, identify a profile of their strengths and needs, and devise appropriate professional development support and ways to prepare teachers to become equitable culturally responsive practitioners. To investigate these issues, the dissertation reports on six original empirical studies within two groups of teachers: international pre-service teacher education students from over 25 different countries as well as pre-service and practising Finnish teachers. The international pre-service teacher sample consisted of (n = 38, study I; and n = 45, studies II-IV) and the pre-service and practising Finnish teachers sample encompassed (n = 89, study V; and n = 380, study VI). The data used were multi-source including both qualitative (students’ written work from the course including journals, final reflections, pre- and post-definition of key terms, as well as course evaluation and focus group transcripts) and quantitative (multi-item questionnaires with open-ended options), which enhanced the credibility of the findings resulting in the triangulation of data. Cluster analytic procedures, multivariate analysis of variance (MANOVA), and qualitative analyses mostly Constant Comparative Approach were used to understand pre-service teachers’ and practising teachers’ developing cultural understandings. The results revealed that the mainly white / mainstream teacher candidates in teacher education programmes bring limited background experiences, prior socialisation, and skills about diversity. Taking a multicultural education course where identity development was a focus, positively influenced teacher candidates’ knowledge and attitudes toward diversity. The results revealed approaches and strategies that matter most in preparing teachers for culturally responsive teaching, including but not exclusively, small group activities and discussions, critical reflection, and field immersion. This suggests that there are already some tools to address the need for the support needed to teach successfully a diversity of pupils and provide in-service training for those already practising the teaching profession. The results provide insight into aspects of teachers’ knowledge about both the linguistic and cultural needs of their students, as well as what constitutes a repertoire of approaches and strategies to assure students’ academic success. Teachers’ knowledge of diversity can be categorised into sound awareness, average awareness, and low awareness. Knowledge of diversity was important in teachers’ abilities to use students’ language and culture to enhance acquisition of academic content, work effectively with multilingual learners’ parents/guardians, learn about the cultural backgrounds of multilingual learners, link multilingual learners’ prior knowledge and experience to instruction, and modify classroom instruction for multilingual learners. These findings support the development of a competency based model and can be used to frame the studies of pre-service teachers, as well as the professional development of practising teachers in increasingly diverse contexts. The present set of studies take on new significance in the current context of increasing waves of migration to Europe in general and Finland in particular. They suggest that teacher education programmes can equip teachers with the necessary attitudes, skills, and knowledge to enable them work effectively with students from different ethnic and language backgrounds as they enter the teaching profession. The findings also help to refine the tools and approaches to measuring the competencies of teachers teaching in mainstream classrooms and candidates in preparation.

The effect of cationic-anionic polyelectrolyte multilayer surface treatment on inkjet ink spreading and print quality

The focus of the work reported in this thesis was to study and to clarify the effect of polyelectrolyte multilayer surface treatment on inkjet ink spreading, absorption and print quality. Surface sizing with a size press, film press with a pilot scale coater, and spray coating, have been used to surface treat uncoated wood-free, experimental wood-free and pigmentcoated substrates. The role of the deposited cationic (polydiallydimethylammonium chloride, PDADMAC) and anionic (sodium carboxymethyl cellulose, NaCMC) polyelectrolyte layers with and without nanosilica, on liquid absorption and spreading was studied in terms of their interaction with water-based pigmented and dye-based inkjet inks. Contact angle measurements were made in attempt to explain the ink spreading and wetting behavior on the substrate. First, it was noticed that multilayer surface treatment decreased the contact angle of water, giving a hydrophilic character to the surface. The results showed that the number of cationic-anionic polyelectrolyte layers or the order of deposition of the polyelectrolytes had a significant effect on the print quality. This was seen for example as a higher print density on layers with a cationic polyelectrolyte in the outermost layer. The number of layers had an influence on the print quality; the print density increased with increasing number of layers, although the increase was strongly dependent on ink formulation and chemistry. The use of nanosilica clearly affected the rate of absorption of polar liquids, which also was seen as a higher density of the black dye-based print. Slightly unexpected, the use of nanosilica increased the tendency for lateral spreading of both the pigmented and dye-based inks. It was shown that the wetting behavior and wicking of the inks on the polyelectrolyte coatings was strongly affected by the hydrophobicity of the substrate, as well as by the composition or structure of the polyelectrolyte layers. Coating only with a cationic polyelectrolyte was not sufficient to improve dye fixation, but it was demonstrated that a cationic-anionic-complex structure led to good water fastness. A threelayered structure gave the same water fastness values as a five-layered structure. Interestingly, the water fastness values were strongly dependent not only on the formed cation-anion polyelectrolyte complexes but also on the tendency of the coating to dissolve during immersion in water. Results showed that by optimizing the chemistry of the layers, the ink-substrate interaction can be optimized.

Methods of overcoming dormancy in Schizolobium amazonicum Huber ex Ducke (Leguminosae - Caesalpinioideae) seeds

Seed dormancy is a frequent phenomenon in tropical species, causing slow and non-uniform germination. To overcome this, treatments such as scarification on abrasive surface and hot water are efficient. The objective of this study was to quantify seed germination with no treatment (Experiment 1) and identify an efficient method of breaking dormancy in Schizolobium amazonicum Huber ex Ducke seeds (Experiment 2). The effects of manual scarification on electric emery, water at 80ºC and 100ºC and manual scarification on wood sandpaper were studied. Seeds were sown either immediately after scarification or after immersion in water for 24h in a sand and sawdust mixture. Germination and hard seed percentages and germination speed were recorded and analyzed in a completely randomized design. Analysis of germination was carried out at six, nine, 12, 15, 18, 21 and 24 days after sowing as a 4x2 factorial design and through regression analysis. Treatment means of the remaining variables were compared by the Tukey test. Seed germination with no treatment started on the 7th day after sowing and reached 90% on the 2310th day (Experiment 1). Significant interaction between treatments to overcome dormancy and time of immersion in water was observed (Experiment 2). In general, immersion in water increased the germination in most evaluations. The regression analyses were significant for all treatments with exception of the control treatment and immersion in water at 80ºC. Germination speed was higher when seeds were scarified on an abrasive surface (emery and sandpaper) and, in these treatments, the germination ranged from 87% to 96%, with no hard seeds. S. amazonicum seeds coats are impermeable to water, which hinders quick and uniform germination. Scarification on electric emery followed by immediate sowing, scarification on sandpaper followed by immediate sowing and sowing after 24h were the most efficient treatments for overcoming dormancy in S. amazonicum seeds.

Methods for overcoming dormancy in Dinizia excelsa Ducke seeds

The impermeability of seed coat to water is common mechanism in Fabaceae seeds. Treatments to overcome hardseededness include scarification with sulphuric acid, scarification on abrasive surface and soaking in water among others. The objective of this study was to identify an effective method to overcome dormancy in Dinizia excelsa seeds. A pre-test (untreated seed) and three experiments were carried out: immersion of seeds in acid sulphuric for 10, 20, 30, 40, 50 and 60min (experiment 1); scarification on abrasive surface at the positions distal end, near of the mycrophyle and on the lateral tissue and tegument clipping at 1mm of the distal end, near of the mycrophyle and on the lateral tissue (experiment 2); scarification on abrasive surface and immersion in water for 0, 12, 24 and 48h (experiment 3). The experimental design was completely with four replications of 50 seeds for each treatment. The statistical analysis was carried out by ANOVA and regression analysis. Seedlings emergence on untreated seeds started on the 8th day after sowing and reached 52.5% on the 1,709th day. In general, the treatments to overcome dormancy increase emergence. Emergence was higher for seeds treated with sulphuric acid for 20 and 30min with emergence of 93.6% and 86.6%, respectively. For seeds scarified on abrasive surface higher emergences were recorded for scarification on distal end, near of the mycrophyle and on the lateral, 82.7%, 74.3% and 75.7%, respectively. Seeds scarified manually showed higher emergence when not immersed in water (75%), or when immersed for 12 and 24h (75%, 73.6% and 65.6%, respectively). Immersion seeds in sulphuric acid for 20 and 30min and scarification on abrasive surface of distal end are effective to overcome dormancy in D. excelsa.

Osmotic priming methodologies in relation to the physiological performance of rangpur lime seeds (Citrus limonia Osbeck)

Several mechanisms have been used to promote rapid germination of citrus seeds and uniform seedling emergence. We evaluated the effects of osmotic priming on the physiological performance of Rangpur lime seeds (Citrus limonia Osbeck). Seeds were treated with 30 g of Captan and 10 g of Tecto 600 in 20-litre batches and stored, without drying, at 10 ºC and 50% relative humidity for periods of 3, 6 and 9 months. After each period, seeds were primed at 25 ºC, in the light, by immersion in Poliethylenoglicol (PEG 6000), potassium nitrate (KNO3) and 70% PEG 6000 plus 30% KNO3, all at an osmotic potential of -1.1MPa, for priming periods of 3, 6, 9 and 12 days. Percentage germination, tray emergence and the emergence rate index (ERI) were evaluated. Priming in PEG 6000 solution, independent of priming period, or in KNO3 or PEG 6000 plus KNO3 for up to 9 days, were efficient at improving the physiological performance of seeds stored for up to 3 months. Osmotic priming appears to be a promising technique for improving the physiological quality of Rangpur lemon seeds.

Effects of temperature and pre-germinative treatments on seed germination of Talinum triangulare (Jacq. ) willd (Portulacaceae)

The objective of this study was to evaluate the effects of temperature, substrate and pre-germinative treatments on T. triangulare seeds. Four temperatures (constant 20, 25, 30 °C and alternate 20-30 °C) and two types of seeding (on paper and between paper), with light, were evaluated. The pre-germinative treatments evaluated included: immersion in water (24 hours), immersion in 6% hypochlorite solution (1 hour), immersion in 0.2% potassium nitrate solution (24 hours), immersion in 0.05% gibberellin solution (24 hours) and the control (untreated seeds). The highest germination percentage was observed at the alternate temperatures of 20-30 ºC, but with no significant difference between the substrates at this temperature. Soaking seeds in KNO3 gave the highest percentage germination and germination speed index (GSI), which differed from the other treatments except for soaking in water. Pre-soaking of T. triangulare seeds favors germination and may be done only in pure water, resulting in a more rapid and uniform germination.

Viability of barley seeds by the tetrazolium test

The tetrazolium test is used to control seed quality of various plant species since it allows a rapid evaluation of viability. Freshly harvested barley seeds show dormancy that can make the germination test ineffective for an immediate evaluation. Therefore, the development of more efficient methods, such as the tetrazolium test, is necessary. The objective of this research work was to study various procedures for performing the tetrazolium test on barley seeds. Five lots of cv. BRS 195 barley seeds were used and subjected to the following treatments: two different methods of seed preconditioning (direct immersion in H2O and between sheets of moistened paper towels); two types of preparation for staining (longitudinal cross-section of the seed through the embryo with immersion of one half in a 2,3,5 triphenyl tetrazolium chloride solution or placing both halves on top of filter paper moistened with the tetrazolium salt solution); two methods of staining (on top of filter paper and direct immersion in the tetrazolium salt solution). Three concentrations of the tetrazolium salt solution (0.1%, 0.5%, and 1.0%) were used. It was concluded that the tetrazolium test on barley seeds may be accomplished with preconditioning by direct immersion in H2O and staining by immersing in a 0.1% or 0.5% concentration of tetrazolium salt solution or staining on top of filter paper moistened with such solution at a 1.0% concentration.

Viability of recently harvested and stored Xylopia aromatica (Lam.) Mart. (Annonaceae) seeds

Xylopia aromatica is a native species from Brazil's "Cerrado", recommended for restoration ecology and also as a medicine. Its seeds have embryos with morphophysiological dormancy, making nursery propagation difficult. The objective of this study was to verify the efficiency of X-ray and tetrazolium tests for evaluating the viability of three seed lots, stored for different periods. All seeds were X-rayed (13 kV, 350 seconds) and samples used for tetrazolium and germination tests. In the tetrazolium test, seeds were submitted to six treatments at two temperatures (25 and 30 °C) with imbibition in distilled water and immersion in three concentrations of tetrazolium solution (0.5, 0.75 and 1%) at the two imbibition temperatures. Seeds for the germination test were placed for imbibition in distilled water and a 500 ppm Promalin® (6-Benzyladenine + GA4 + GA7) solution and later sown in sterilized sand. The embryo could not be observed with the X-ray test. However, those seeds observed with an undamaged endosperm did not differ in the percentages of seeds with firm and stained endosperms observed in the tetrazolium test for all the lots. The tetrazolium test is efficient for evaluating seed viability, principally if imbibed at 30 °C and immersed in a 0.5% solution at 30 °C.

The effects of the menstrual cycle and hormonal contraceptives on the central thermoeffector threshold temperatures and width of the interthreshold zone

Basal body temperature (BBT) and thermoeffector thresholds increase following ovulation in many women. This study investigated if solely central thermoregulatory alterations are responsible. Seven females in a non-contraceptive group (NCG) were compared with 5 monophasic contraceptive users (HCG) on separate accounts: pre-ovulation (Trial I; d 2-5) and post-ovulation (Trial 2; 4-8 d post-positive ovulation) for NCG, and active phase for HCG (d 2-5, d 18-21). During immersion in 28°C water to the axilla, participants exercised for 20-30 min on an underwater ergometer. After steadily sweating, immersion continued until metabolism increased two-fold due to shivering. Rectal (Tre) BBT was not different between trials for neither NCG (1: 37.34±0.16°C; 2: 37.35±0.27°C) nor HCG. At exercise termination, Tre forehead sweating cessation increased (P<0.05) in trial 2 irrespective of group (1: 37.55±0.39°C; 2: 37.90±0,46°C). Tre shivering onset did not increase (P>0.05) in trial 2 (1: 36.91±0.50°C; 2: 37.07±0,45°C). The widths of the interthreshold zone increased (P<0.05) in trial 2 (1: 0.64±0.22°C; 2: 0.82±0.37°C) due to the increased sweating threshold only. HCG cooled quicker (1: -l.15±0,43°C; 2: -1.00±0.50°C) than NCG participants (1: - 0.58±0.22°C; 2: -0.52±O.29°C), and tympanic (Tty) sweat thresholds were significantly (P<0.05) decreased (1: 34.76±0.54°C; 2: 35.39±0.61°C) versus NCG (l: 35.57±0.77°C; 2: 35.89±1.04°C). Lastly, Tre and Tty thresholds were significantly different (P