cDNA cloning and characterization of a novel SNX gene differentially expressed in previtellogenic oocytes of gibel carp

To understand the molecular events governing fish oogenesis, a multiple technique was used to identify the genes differentially expressed at different phases during fish oogenesis. This technique is a combination of suppression subtractive hybridization, SMART cDNA synthesis and RACE-PCR. Here we report the cDNA cloning and expression characterization of a novel SNX gene based on its differential transcription between previtellogenic and fully mature oocytes in naturally gynogenetic gibel carp. First, a cDNA fragment selectively expressed in previtellogenic oocytes was identified and used to screen a SMART cDNA library prepared from the same mRNA sample by RACE-PCR for cloning fully length cDNA. The full length cDNA was 1392-bp long and coded for a novel SNX protein with 225 amino acids. The 5' UTR had 72 bp and 3' UTR had 642 bp. Unlike most of maternal genes that are transcribed after vitellogenesis and stored in oocytes, this gene is expressed at a higher level in the previtellogenic oocytes and at a much lower level in fully matured oocytes. However, RT-PCR analysis of tissues showed it was ubiquitous transcription. The novel gene is named fish sorting nexin (fSNX), because it contains a conserved PX domain. The fact which major expression of the gene occurs in the previtellogenic oocytes suggests that it might have an important function in the oogenesis. (C) 2003 Elsevier Inc. All rights reserved.

Applications of factor-criteria system reconstruction analysis in the reproduction research on grass carp, black carp, silver carp and bighead in the Yangtze River

The natural reproduction of grass carp, black carp, silver carp, and bighead will be affected adversely by the Three Gorges Project in the Yangtze River. One of the methods to save the fish is to regulate the water levels, keeping them suited for the species to spawn. Nine factors associated with the scale of larvae-flood of the four species are classified into five levels, and the ranges of these factors producing larvae-floods are given by using the "factor-criteria system reconstruction analysis" method. Moderate beginning water levels and flow, with high daily increases in the rate of water level and flow, and a long duration of water level rising are important for the production of a large larvae-flood.

Temperature-independent FBG pressure sensor with high sensitivity

This study develops a fiber Bragg grating (FBG) pressure sensor partly shielded with a metal tube. The thermal-strain cross effect is avoided and its pressure sensitivity is increased to -2.44 x 10(-3) MPa, about 1200 times as that of a bare fiber grating. Due to its good sensing linearity, this sensor can be applied in the measurement of hydraulic pressure and vibration. (c) 2006 Elsevier Inc. All rights reserved.

A Simplified Soft-output QRD-M MIMO Detector

In this paper, a low-complexity soft-output QRD-M detection algorithm is proposed for high-throughput Multiple-input multiple-output (MIMO) systems. By employing novel expansion on demand and distributed sorting scheme, the proposed algorithm can reduce 70% and 85% foundational operations for 16-QAM and 64-QAM respectively compared to the conventional QRD-M algorithm. Furthermore, the proposed algorithm can yield soft information to improve the bit error rate (BER) performance. Simulation results show that the proposed algorithm can achieve a near-NIL detection performance with less foundational operations

Generalized Viscoplastic Modeling of Debris Flow

Various concepts have been proposed or used in the development of rheological models for debris flow. The earliest model developed by Bagnold was based on the concept of the “dispersive” pressure generated by grain collisions. Bagnold’s concept appears to be theoretically sound, but his empirical model has been found to be inconsistent with most theoretical models developed from non-Newtonian fluid mechanics. Although the generality of Bagnold’s model is still at issue, debris-flow modelers in Japan have generally accepted Takahashi’s formulas derived from Bagnold’s model. Some efforts have recently been made by theoreticians in non-Newtonian fluid mechanics to modify or improve Bagnold’s concept or model. A viable rheological model should consist both of a rate-independent part and a rate-dependent part. A generalized viscoplastic fluid (GVF) model that has both parts as well as two major rheological properties (i.e., the normal stress effect and soil yield criterion) is shown to be sufficiently accurate, yet practical, for general use in debris-flow modeling. In fact, Bagnold’s model is found to be only a particular case of the GVF model. Analytical solutions for (steady) uniform debris flows in wide channels are obtained from the GVF model based on Bagnold’s simplified assumption of constant grain concentration.

Modelling of submarine landslides and generated water waves

The slide of unstable sedimentary bodies and their hydraulic effects are studied by numerical means. A two-dimensional fluid mechanics model based on Navier-Stokes equations has been developed considering the sediments and water as a mixture. Viscoplastic and diffusion laws for the sediments have been introduced into the model. The numerical model is validated with an analytical solution for a Bingham flow. Laboratory experiments consisting in the slide of gravel mass have been carried out. The results of these experiments have shown the importance of the sediment rheology and the diffusion. The model parameters are adjusted by trial and error to match the observed “sandflow”.

Uniform mems chip temperatures in the nucleate boiling heat transfer region by selecting suitable, medium boiling number range

The not only lower but also uniform MEMS chip temperatures can he reached by selecting suitable boiling number range that ensures the nucleate boiling heat transfer. In this article, boiling heat transfer experiments in 10 silicon triangular microchannels with the hydraulic diameter of 55.4 mu m were performed using acetone as the working fluid, having the inlet liquid temperatures of 24-40 degrees C, mass fluxes of 96-360 kg/m(2)s, heat fluxes of 140-420 kW/m(2), and exit vapor mass qualities of 0.28-0.70. The above data range correspond to the boiling number from 1.574 x 10(-3) to 3.219 x 10(-3) and ensure the perfect nucleate boiling heat transfer region, providing a very uniform chip temperature distribution in both streamline and transverse directions. The boiling heat transfer coefficients determined by the infrared radiator image system were found to he dependent on the heat Axes only, not dependent on the mass Axes and the vapor mass qualities covering the above data range. The high-speed flow visualization shows that the periodic flow patterns take place inside the microchannel in the time scale of milliseconds, consisting of liquid refilling stage, bubble nucleation, growth and coalescence stage, and transient liquid film evaporation stage in a full cycle. The paired or triplet bubble nucleation sites can occur in the microchannel corners anywhere along the flow direction, accounting for the nucleate boiling heat transfer mode. The periodic boiling process is similar to a series of bubble nucleation, growth, and departure followed by the liquid refilling in a single cavity for the pool boiling situation. The chip temperature difference across the whole two-phase area is found to he small in a couple of degrees, providing a better thermal management scheme for the high heat flux electronic components. Chen's [11 widely accepted correlation for macrochannels and Bao et al.'s [21 correlation obtained in a copper capillary tube with the inside diameter of 1.95 mm using R11 and HCFC123 as working fluids can predict the present experimental data with accepted accuracy. Other correlations fail to predict the correct heat transfer coefficient trends. New heat transfer correlations are also recommended.

Numerical simulations of interrupted and conventional microchannel heat sinks

We provide three-dimensional numerical simulations of conjugate heat transfer in conventional and the newly proposed interrupted microchannel heat sinks. The new microchannel heat sink consists of a set of separated zones adjoining shortened parallel microchannels and transverse microchambers. Multi-channel effect, physical property variations, and axial thermal conduction are considered. It is found that flow rate variations in different channels can be neglected, while heat received by different channels accounts for 2% deviations from the averaged value when the heat flux at the back surface of the silicon chip reaches 100 W/cm(2). The computed hydraulic and thermal boundary layers are redeveloping in each separated zone due to shortened flow length for the interrupted microchannel heat sink. The periodic thermal developing flow is responsible for the significant heat transfer enhancement. Two effects influence pressure drops across the newly proposed microchannel heat sink. The first one is the pressure recovery effect in the microchamber, while the second one is the head loss when liquid leaves the microchamber and enters the next zone. The first effect compensates or suppresses the second one, leading to similar or decreased pressure drop than that for the conventional microchannel heat sink, with the fluid Prandtl number larger than unity.

草本植物对土质路面径流水动力学特征及水沙过程的影响

通过室内人工模拟降雨,研究了草本植物不同覆盖度土质路面的径流水动力学特征以及路面的产流产沙过程。结果表明,路面径流的弗劳德数和雷诺数属层流的急流范畴,并且二者与径流流速及过水断面单位能量相同,均随草本植物覆盖度的增大而减小。而Darcy-weisbach阻力系数以及曼宁糙率系数则均随覆盖度的增大而增大。在不同覆盖度土质路面上,径流量随径流时间急剧增大后趋于稳定,且二者符合移轴双曲线关系,而输沙率则经历了先增大后减小的过程。随着植被覆盖度的增大,土质道路的水分入渗率逐渐增大,而径流量、输沙率及含沙率均逐渐减小。该研究表明土质路面种植的草本植物具有较好的水土保持功能,为阐明草本植物与土壤侵蚀的关系提供了理论依据。

PAA对不同土壤保水和蒸发性能的影响

采用土柱法研究了不同PAA施入量对3种黄土高原主要土壤类型(黄绵土、黑垆土和塿土)的持水性能、土壤饱和导水率和土壤蒸发量的影响,以进一步阐明PAA的保水和蒸发作用。结果表明,施入PAA提高了土壤的持水性能。在未加入PAA之前黑垆土的持水性能最低,塿土的最高,黄绵土的次之;加入PAA后,黑垆土的持水能力显著增加,几乎为对照的2倍,塿土和黄绵土也都比对照高。土壤的供水能力随PAA用量的增加而增强,不同土壤类型之间表现为:塿土>黑垆土>黄绵土。未加入PAA时,3种土壤饱和导水率大小为:塿土>黑垆土>黄绵土;加入PAA后,3种土壤的饱和导水率都降低,且基本随PAA用量的增加而降低。在一定水分条件下,PAA的施入提高了土壤的抗蒸发性能,随PAA用量的增加,塿土和黑垆土的土壤蒸发量增加,但都低于对照,而黄绵土的土壤蒸发量随PAA用量的增加而降低。其中施PAA54.5 mg/kg的塿土、黑垆土和施PAA225.8 mg/kg的黄绵土与对照相比,土壤蒸发量分别减少了44.0%,44.6%和30.6%。

黄土高原水土流失治理进展及其对策

黄土高原地区水土流失类型复杂,既有自然因素和人为因素,也有水力、风力、重力产生的变化。同时气候干旱、水资源缺乏成为植物生长和生态环境改善的最大障碍。在国家实施西部大开发的进程中,良好的生态环境成为生存与发展和建设小康社会的标志。无论从西部大开发的战略角度考虑,还是从退耕还林(草)政策实施8年以后,如何解决黄土高原地区人民群众衣食住行、经济发展问题及黄河减沙的角度来看,采取有效措施,加快该区的生态建设已势在必行。根据第十一个五年规划的建议,以生态恢复学和土壤侵蚀学的基本原理为指导,分析了黄土高原地区的重要性,探讨了黄土高原生态建设与经济发展的基本现状,因地制宜地提出了发展对策。

不同生育期土壤-苜蓿系统水流阻力和水容变化规律研究

紫花苜蓿是水蚀风蚀交错带重要的人工种植牧草,具有较强的耐寒、耐旱性。自然条件下的模拟土柱试验在陕北神木试验站进行,采用抑制蒸腾法定量分析了水蚀风蚀交错带土壤-苜蓿系统水流阻力、水容等瞬态水流参数变化过程。结果表明:不同生育期内瞬态水流阻力及水容有明显差异:开花旺盛期平均水流阻力最小0.22×108Mpa.s.m-3,约为干枯老化期的1/9;平均水容最大5.38×10-4m3/Mpa;是现蕾期的4倍多。该研究结果有助于揭示紫花苜蓿体内水分调节作用及抗旱机制,对干旱半干旱地区植被恢复有重要指导意义。

施肥对干旱胁迫下夏玉米根系提水的调节作用研究

以耐旱性玉米品种郑单958号为材料,采用两室分根土培装置,通过时域反射计(TDR)对上下土层土壤含水量进行控制和观测,研究施肥对干旱胁迫条件下玉米根系提水作用的影响.结果表明,玉米根系在土层上干下湿条件下(即上下层土壤存在一定水势差时)存在明显提水作用;玉米根系提水量在整个生育期呈单峰变化,并以吐丝期最大;上层土壤施肥可以调节玉米根系提水作用强弱,整个生育期根系总提水量表现为NP配施>单施P>CK>单施N,NP配施处理全生育期单株提水量(1 948.6 g)分别是单施P处理、CK和单施N处理的1.5倍、3.1倍和3.5倍.玉米整个生育期根系总提水量与收获期不同层次根系干重和体积存在极显著正相关关系,也与其地上部分生物量和籽粒产量呈极显著或显著正相关关系.可见,玉米根系的提水作用强弱因生育期和施肥处理而变化,施肥主要通过影响根系生长来调节其提水作用;在一定水分环境条件下,玉米根系提水作用能促进作物生长,提高其籽粒产量.

子午岭植被恢复对土壤饱和导水率的影响

通过对子午岭林区不同植被的土壤性质进行实验室测定和野外调查,对饱和土壤水分运动的重要参数之一土壤饱和导水率(Ks)及其相关因子进行了多元分析和通径分析,揭示了植被恢复提高土壤水分传输性能的机理,主要结论如下:土壤有机质是子午岭林区九种植被下土壤饱和导水率提高的主要驱动因子。不同植被下的土壤饱和导水率均随深度的增加而迅速降低,尽管草地和先锋草地在5～10cm深度有一强透水层。土壤饱和导水率在剖面上的平均值,从辽东栎、早期森林、灌丛、先锋草地、弃耕地到草地依次降低。灌丛与草地、弃耕地的差异达到显著水平,辽东栎顶级群落的饱和导水率最高,植被的恢复明显提高了土壤饱和导水率。土壤容重、毛管孔隙度、>0.25mm团聚体含量及粘粒含量直接影响土壤饱和导水率。土壤有机质含量的提高能够改善容重、毛管孔隙度、团聚体含量等物理性质。

黄土高原坡地表层土壤饱和导水率和水分含量空间变异特征

表层土壤水分含量和饱和导水率对深层土壤水分的动态的变化具有重要的决定作用。在黄土高原坡地(50m×360 m)范围内进行网格(10 m×10 m)取样,用地统计学方法研究表层(0~30 cm)土壤饱和导水率和水分含量的空间变异特征。结果表明:1)坡地表层土壤密度变化规律为坡下位大于坡上位,土壤饱和导水率变异系数为0.37,属于中等变异强度;2)饱和导水率和自然对数化的饱和导水率在360 m尺度内均不具备空间结构特征,是纯随机变量,线性有基台模型适用于描述表层土壤水分的分布特征,水分分布存在明显的块金效应,并且随滞后距离的增加半方差变大;3)饱和导水率和水分含量从坡上位到坡下位均呈现波浪式变化,饱和导水率大的采样点土壤水分含量低,反之则高。