907 resultados para Electricity in dentistry
Resumo:
Thirty percent of 70-year-old women have osteoporosis; after age of 80 its prevalence is up to 70%. Postmenopausal women with osteoporosis seem to be at an increased risk for cardiovascular events, and deterioration of oral health, as shown by attachment loss of teeth, which is proportional to the severity of osteoporosis. Osteoporosis can be treated with many different medication, e.g. estrogen and alendronate. We randomized 90 elderly osteoporotic women (65-80 years of age) to receive hormone therapy (HT)(2mg E2+NETA), 10mg alendronate, and their combination for two years and compared their effects on bone mineral density (BMD) and turnover, two surrogate markers of the risk of cardiovascular diseases, C-reactive protein (CRP) and E-selectin, as well as oral health. The effect of HT on health-related quality of life (HRQoL) was studied in the population-based cohort of 1663 postmenopausal women (mean age 68 yr) (585 estrogen users and 1078 non-users). BMD was measured with dual-energy X-ray absorptiometry (DXA) at 0, 12 and 24 months. Urinary N-telopeptide (NTX) of type I collagen, a marker of bone resorption, and serum aminoterminal propeptide of human type I procollagen (PINP), a marker of bone formation, were measured every six months of treatment. Serum CRP and E-selectin, were measured at 0, 6, and 12 months. Dental, and periodontal conditions, and gingival crevicular fluid (GCF) matrix metalloproteinase (MMP)-8 levels were studied to evaluate the oral health status and for the mouth symptoms a structured questionnaire was used. The HRQoL was measured with 15D questionnaire. Lumbar spine BMD increased similarly in all treatment groups (6.8-8.4% and 9.1-11.2%). Only HT increased femoral neck BMD at both 12 (4.9%) and 24 months (5.8%), at the latter time point the HT group differed significantly from the other groups. HT reduced bone marker levels of NTX and PINP significantly less than other two groups.Oral HT significantly increased serum CRP level by 76.5% at 6 and by 47.1% (NS) at 12 months, and decreased serum E-selectin level by 24.3% and 30.0%. Alendronate had no effect on these surrogate markers. Alendronate caused a decrease in the resting salivary flow rate and tended to increase GCF MMP-8 levels. Otherwise, there was no effect on the parameters of oral health. HT improved the HRQoL of elderly women significantly on the dimensions of usual activities, vitality and sexual activity, but the overall improvement in HRQoL was neither statistically significant nor clinically important. In conclusion, bisphosphonates might be the first option to start the treatment of postmenopausal osteoporosis in the old age.
Resumo:
Chronic rhinosinusitis is one of the most common chronic respiratory tract diseases affecting up to 15% of the adult population in the Western world. It may be perpetuated by factors predisposing to sinus ostial obstruction together with inflammatory changes in the sinus mucosa. Chronic rhinosinusitis is associated with asthma, and it may represent the same disease process. Chronic rhinosinusitis with nasal polyposis (CRSwNP) and asthma share also the characteristic inflammatory features and histopathologic feature of airway remodelling. Remodelling is considered as a key event in the pathogenesis of asthma. It is controlled by a delicate balance between the matrix metalloproteinases (MMPs) and their regulators. The purpose of the present study was to evaluate the microbiological findings, inflammatory features and MMP and tissue inhibitor of metalloproteinases-1 (TIMP-1) expression in CRSwNP. The results were related to the patient history, exposure to moisture and clinical outcome in order to find out possible explanations for the etiology and chronicity of CRSwNP. Bacterial culture results were similar in patients and in controls and do not explain the chronic course of CRSwNP. The presence of fungi seems to be more common in CRSwNP than chronic rhinosinusitis in general, and they should be actively searched for using microbiological as well as histological methods. Typical outdoor fungal species were found in nasal lavage samples taken from controls in the autumn but not in the winter, reflecting environmental exposure. Exposure to moisture was reported by 46% of the CRSwNP patients, which is in accordance to the Finnish general population. Exposed patients did not differ significantly from non-exposed subjects with regards to microbiological findings, tissue eosinophilia and clinical outcome. Significantly elevated levels of collagenase-2 (MMP-8) and interleukin (IL)-8 but not tumour necrosis factor-α were found in CRSwNP patients. In particular, the activation of mesenchymal-type MMP-8 but not polymorphonuclear-type MMP-8 was associated with elevated IL-8 levels. IL-8 and MMP-8 may form an inductive cytokine-proteinase cascade in CRSwNP pathogenesis and provide a target for novel therapies and a diagnostic tool for monitoring CRSwNP treatment. The proteolytic spectrum is different in eosinophilic and non-eosinophilic CRSwNP with the up-regulation of MMP-8 and MMP-9 in non-eosinophilic CRSwNP, suggesting different pathophysiology in these subgroups. The lack of MMP up-regulation was associated with a poor prognostic factor and worse clinical outcome, representing a possible synergic anti-inflammatory function of MMP-8 and MMP-9 in CRSwNP. This study provides new information about possible immunologic mechanisms in the pathogenesis of CRSwNP. The recently discovered anti-inflammatory/ defensive properties of MMP-8 and MMP-9 in animal models are reported for the first time in a clinical setting in human inflammatory diseases.
Resumo:
Infectious diseases put an enormous burden on both children and the elderly in the forms of respiratory, gastrointestinal and oral infections. There is evidence suggesting that specific probiotics may be antagonistic to pathogens and may enhance the immune system, but the clinical evidence is still too sparce to make general conclusions on the disease-preventive effects of probiotics. This thesis, consisting of four independent, double-blind, placebo-controlled clinical trials, investigated whether Lactobacillus GG (LGG) or a specific probiotic combination containing LGG would reduce the risk of common infections or the prevalence of pathogens in healthy and infection-prone children and in independent and institutionalised elderly people. In healthy day-care children, the 7-month consumption of probiotic milk containing Lactobacillus GG appeared to postpone the first acute respiratory infection (ARI) by one week (p=0.03, adjusted p=0.16), and to reduce complicated infections (39% vs. 47%, p<0.05, adjusted p=0.13), as well as the need for antibiotic treatment (44% vs. 54%, p=0.03, adjusted p=0.08) and day-care absences (4.9 vs. 5.8 days, p=0.03, adjusted p=0.09) compared to the placebo milk. In infection-prone children, the 6-month consumption of a combination of four probiotic bacteria (LGG, L. rhamnosus LC705, Propionibacterium freudenreichii JS, Bifidobacterium breve 99) taken in capsules appeared to reduce recurrent ARIs (72% vs. 82%, p<0.05; adjusted p=0.06), and the effect was particularly noticeable in a subgroup of children with allergic diseases (12% vs. 33%, p=0.03), although no effect on the presence of nasopharyngeal rhinovirus or enterovirus was seen. The 5-month consumption of the same probiotic combination did not show any beneficial effects on the respiratory infections in frail, institutionalised elderly subjects. In healthy children receiving Lactobacillus GG, the reduction in complications resulted in a marginal reduction in the occurrence of acute otitis media (AOM) (31% vs. 39%, p=0.08; adjusted p=0.19), and the postponement of the first AOM episode by 12 days (p=0.04; adjusted p=0.09). However, in otitis-prone children, a probiotic combination did not reduce the occurrence of AOM or the total prevalence of common AOM pathogens (Streptococcus pneumoniae, Haemophilus influenzae, Moraxella catarrhalis), except in the case of children with allergic diseases, in whom probiotics reduced recurrent AOM episodes (0% vs. 14%, p=0.03). In addition, interaction between probiotics and bacterial carriage was seen: probiot-ics reduced AOM in children who did not carry any bacterial pathogens (63% vs. 83%), but the effect was the reverse in children carrying bacteria in the nasopharynx (74% vs 62%) (p<0.05). Long-term probiotic treatment, either LGG given in milk to healthy children for 7 months or a combination of probiotics given in capsules to institutionalised elderly subjects for 5 months, did not reduce the occurrence of acute diarrhoea. However, when the probiotic combination (LGG, L. rhamnosus LC705, Propionibacterium JS) was given in cheese to independent elderly subjects for 4 months, the oral carriage of high Candida counts was reduced in the probiotic group vs. the placebo group (21% vs. 34%, p=0.01, adjusted p=0.004). The risk of hyposalivation was also reduced in the probiotic group (p=0.05). In conclusion, probiotics appear to slightly alleviate the severity of infections by postponing their appearance, by reducing complications and the need for antimicrobial treatments. In addition, they appear to prevent recurrent infections in certain subgroups of children, such as in infection-prone children with allergic diseases. Alleviating ARI by probiotics may lead to a marginal reduction in the occurrence of AOM in healthy children but not in infection-prone children with disturbed nasopharyngeal microbiota. On the basis of these results it could be supposed that Lactobacillus GG or a specific combination containing LGG are effective against viral but not against bacterial otitis, and the mechanism is probably mediated through the stimulation of the immune system. A specific probiotic combination does not reduce respiratory infections in frail elderly subjects. Acute diarrhoea, either in children or in the elderly, is not prevented by the continuous, long-term consumption of probiotics, but the consumption of a specific probiotic combination in a food matrix is beneficial to the oral health of the elderly, through the reduction of the carriage of Candida.
Resumo:
During inflammation, excess production and release of matrix proteinases, including matrix metalloproteinases (MMPs) and serine proteinases, may result in dysregulated extracellular proteolysis leading to development of tissue damage. Pulmonary inflammation may play an important role in the pathogenesis of lung injury in the preterm infant. The aims of this study were to evaluate involvement of MMPs and serine proteinase trypsin in acute and chronic lung injury in preterm infants and to study the role of these enzymes in acute lung injury by means of an animal model of hyperoxic lung injury. Molecular forms and levels of MMP-2, -8, and -9, and their specific inhibitor, tissue inhibitor of metalloproteinases (TIMP)-2, as well as trypsin were studied in tracheal aspirate fluid (TAF) samples collected from preterm infants with respiratory distress. Expression and distribution of trypsin-2 and proteinase-activated receptor 2 (PAR2) was examined in autopsy lung specimens from fetuses, from preterm infants with respiratory distress syndrome (RDS) or bronchopulmonary dysplasia (BPD), and from newborn infants without lung injury. We detected higher MMP-8 and trypsin-2 and lower TIMP-2 in TAF from preterm infants with more severe acute respiratory distress. Infants subsequently developing BPD had higher levels of MMP-8 and trypsin-2 early postnatally than did those who survived without this chronic lung injury. Immunohistochemically, trypsin-2 was mainly detectable in bronchial epithelium, but also in alveolar epithelium, and its expression was strongest in prolonged RDS. Since trypsin-2 is potent activator of PAR2, a G-protein coupled receptor involved in inflammation, we studied PAR2 expression in the lung. PAR2 co-localized with trypsin-2 in bronchoalveolar epithelium and its expression was significantly higher in bronchoalveolar epithelium in preterm infants with prolonged RDS than in newborn controls. In the experimental study, rats were exposed to >95% oxygen for 24, 48, and 60 hours, or room air. At 48 hours of hyperoxia, MMP-8 and trypsin levels sharply increased in bronchoalveolar lavage fluid, and expression of trypsin appeared in alveolar epithelium, and MMP-8 predominantly in macrophages. In conclusion, high pulmonary MMP-8 and trypsin-2 early postnatally are associated with severity of acute lung injury and subsequent development of BPD in preterm infants. In the injured preterm lung, trypsin-2 co-localizes with PAR2 in bronchoalveolar epithelium, suggesting that PAR2 activated by high levels of trypsin-2 is involved in lung inflammation associated with development of BPD. Marked increase in MMP-8 and trypsin early in the course of experimental hyperoxic lung injury suggests that these enzymes play a role in the pathogenesis of acute lung injury. Further exploration of the roles of trypsin and MMP-8 in lung injury may offer new targets for therapeutic intervention.
Resumo:
Electricity generation is vital in developed countries to power the many mechanical and electrical devices that people require. Unfortunately electricity generation is costly. Though electricity can be generated it cannot be stored efficiently. Electricity generation is also difficult to manage because exact demand is unknown from one instant to the next. A number of services are required to manage fluctuations in electricity demand, and to protect the system when frequency falls too low. A current approach is called automatic under frequency load shedding (AUFLS). This article proposes new methods for optimising AUFLS in New Zealand’s power system. The core ideas were developed during the 2015 Maths and Industry Study Group (MISG) in Brisbane, Australia. The problem has been motivated by Transpower Limited, a company that manages New Zealand’s power system and transports bulk electricity from where it is generated to where it is needed. The approaches developed in this article can be used in electrical power systems anywhere in the world.
Resumo:
The quality of short-term electricity load forecasting is crucial to the operation and trading activities of market participants in an electricity market. In this paper, it is shown that a multiple equation time-series model, which is estimated by repeated application of ordinary least squares, has the potential to match or even outperform more complex nonlinear and nonparametric forecasting models. The key ingredient of the success of this simple model is the effective use of lagged information by allowing for interaction between seasonal patterns and intra-day dependencies. Although the model is built using data for the Queensland region of Australia, the method is completely generic and applicable to any load forecasting problem. The model’s forecasting ability is assessed by means of the mean absolute percentage error (MAPE). For day-ahead forecast, the MAPE returned by the model over a period of 11 years is an impressive 1.36%. The forecast accuracy of the model is compared with a number of benchmarks including three popular alternatives and one industrial standard reported by the Australia Energy Market Operator (AEMO). The performance of the model developed in this paper is superior to all benchmarks and outperforms the AEMO forecasts by about a third in terms of the MAPE criterion.
Resumo:
Cool roof coatings have a beneficial impact on reducing the heat load of a range of building types, resulting in reduced cooling energy loads. This study seeks to understand the extent to which cool roof coatings could be used as a residential demand side management (DSM) strategy for retrofitting existing housing in a constrained network area in tropical Australia where peak electrical demand is heavily influenced by residential cooling loads. In particular this study seeks to determine whether simulation software used for building regulation purposes can provide networks with the ‘impact certainty’ required by their DSM principles. The building simulation method is supported by a field experiment. Both numerical and experimental data confirm reductions in total consumption (kWh) and energy demand (kW). The nature of the regulated simulation software, combined with the diverse nature of residential buildings and their patterns of occupancy, however, mean that simulated results cannot be extrapolated to quantify benefits to a broader distribution network. The study suggests that building data gained from regulatory simulations could be a useful guide for potential impacts of widespread application of cool roof coatings in this region. The practical realization of these positive impacts, however, would require changes to the current business model for the evaluation of DSM strategies. The study provides seven key recommendations that encourage distribution networks to think beyond their infrastructure boundaries, recognising that the broader energy system also includes buildings, appliances and people.
Resumo:
This three-phase design research describes the modelling processes for DC-circuit phenomena. The first phase presents an analysis of the development of the DC-circuit historical models in the context of constructing Volta s pile at the turn of the 18th century. The second phase involves the designing of a teaching experiment for comprehensive school third graders. Among other considerations, the design work utilises the results of the first phase and research literature of pupils mental models for DC-circuit phenomena. The third phase of the research was concerned with the realisation of the planned teaching experiment. The aim of this phase was to study the development of the external representations of DC-circuit phenomena in a small group of third graders. The aim of the study has been to search for new ways to guide pupils to learn DC-circuit phenomena while emphasing understanding at the qualitative level. Thus, electricity, which has been perceived as a difficult and abstract subject, could be learnt more comprehensively. Especially, the research of younger pupils learning of electricity concepts has not been of great interest at the international level, although DC-circuit phenomena are also taught in the lower classes of comprehensive schools. The results of this study are important, because there has tended to be more teaching of natural sciences in the lower classes of comprehensive schools, and attempts are being made to develop this trend in Finland. In the theoretical part of the research an Experimental-centred representation approach, which emphasises the role of experimentalism in the development of pupil s representations, is created. According to this approach learning at the qualitative level consists of empirical operations like experimenting, observations, perception, and prequantification of nature phenomena, and modelling operations like explaining and reasoning. Besides planning teaching, the new approach can be used as an analysis tool in describing both historical modelling and the development of pupils representations. In the first phase of the study, the research question was: How did the historical models of DC-circuit phenomena develop in Volta s time? The analysis uncovered three qualitative historical models associated with the historical concept formation process. The models include conceptions of the electric circuit as a scene in the DC-circuit phenomena, the comparative electric-current phenomenon as a cause of different observable effect phenomena, and the strength of the battery as a cause of the electric-current phenomenon. These models describe the concept formation process and its phases in Volta s time. The models are portrayed in the analysis using fragments of the models, where observation-based fragments and theoretical fragements are distinguished from each other. The results emphasise the significance of the qualitative concept formation and the meaning of language in the historical modelling of DC-circuit phenomena. For this reason these viewpoints are stressed in planning the teaching experiment in the second phase of the research. In addition, the design process utilised the experimentation behind the historical models of DC-circuit phenomena In the third phase of the study the research question is as follows: How will the small group s external representations of DC-circuit phenomena develop during the teaching experiment? The main question is divided into the following two sub questions: What kind of talk exists in the small group s learning? What kinds of external representations for DC-circuit phenomena exist in the small group discourse during the teaching experiment? The analysis revealed that the teaching experiment of the small group succeeded in its aim to activate talk in the small group. The designed connection cards proved especially successful in activating talk. The connection cards are cards that represent the components of the electric circuit. In the teaching experiment the pupils constructed different connections with the connection cards and discussed, what kinds of DC-circuit phenomena would take place in the corresponding real connections. The talk of the small group was analysed by comparing two situations, firstly, when the small group discussed using connections made with the connection cards and secondly with the same connections using real components. According to the results the talk of the small group included more higher-order thinking when using the connection cards than with similar real components. In order to answer the second sub question concerning the small group s external representations that appeared in the talk during the teaching experiment; student talk was visualised by the fragment maps which incorporate the electric circuit, the electric current and the source voltage. The fragment maps represent the gradual development of the external representations of DC-circuit phenomena in the small group during the teaching experiment. The results of the study challenge the results of previous research into the abstractness and difficulty of electricity concepts. According to this research, the external representations of DC-circuit phenomena clearly developed in the small group of third graders. Furthermore, the fragment maps uncover that although the theoretical explanations of DC-circuit phenomena, which have been obtained as results of typical mental model studies, remain undeveloped, learning at the qualitative level of understanding does take place.
Resumo:
This thesis comprises four intercomplementary parts that introduce new approaches to brittle reaction layers and mechanical compatibility of metalloceramic joints created when fusing dental ceramics to titanium. Several different methods including atomic layer deposition (ALD), sessile drop contact angle measurements, scanning acoustic microscopy (SAM), three-point bending (TPB, DIN 13 927 / ISO 9693), cross-section microscopy, scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS) were employed. The first part investigates the effects of TiO2 layer structure and thickness on the joint strength of the titanium-metalloceramic system. Samples with all tested TiO2 thicknesses displayed good ceramics adhesion to Ti, and uniform TPB results. The fracture mode was independent of oxide layer thickness and structure. Cracking occurred deeper inside titanium, in the oxygen-rich Ti[O]x solid solution surface layer. During dental ceramics firing TiO2 layers dissociate and joints become brittle with increased dissolution of oxygen into metallic Ti and consequent reduction in the metal plasticity. To accomplish an ideal metalloceramic joint this needs to be resolved. The second part introduces photoinduced superhydrophilicity of TiO2. Test samples with ALD deposited anatase TiO2 films were produced. Samples were irradiated with UV light to induce superhydrophilicity of the surfaces through a cascade leading to increased amount of surface hydroxyl groups. Superhydrophilicity (contact angle ~0˚) was achieved within 2 minutes of UV radiation. Partial recovery of the contact angle was observed during the first 10 minutes after UV exposure. Total recovery was not observed within 24h storage. Photoinduced ultrahydrophilicity can be used to enhance wettability of titanium surfaces, an important factor in dental ceramics veneering processes. The third part addresses interlayers designed to restrain oxygen dissolution into Ti during dental ceramics fusing. The main requirements for an ideal interlayer material are proposed. Based on these criteria and systematic exclusion of possible interlayer materials silver (Ag) interlayers were chosen. TPB results were significantly better in when 5 μm Ag interlayers were used compared to only Al2O3-blasted samples. In samples with these Ag interlayers multiple cracks occurred inside dental ceramics, none inside Ti structure. Ag interlayers of 5 μm on Al2O3-blasted samples can be efficiently used to retard formation of the brittle oxygen-rich Ti[O]x layer, thus enhancing metalloceramic joint integrity. The most brittle component in metalloceramic joints with 5 μm Ag interlayers was bulk dental ceramics instead of Ti[O]x. The fourth part investigates the importance of mechanical interlocking. According to the results, the significance of mechanical interlocking achieved by conventional surface treatments can be questioned as long as the formation of the brittle layers (mainly oxygen-rich Ti[O]x) cannot be sufficiently controlled. In summary in contrast to former impressions of thick titanium oxide layers this thesis clearly demonstrates diffusion of oxygen from sintering atmosphere and SiO2 to Ti structures during dental ceramics firing and the following formation of brittle Ti[O]x solid solution as the most important factors predisposing joints between Ti and SiO2-based dental ceramics to low strength. This among other predisposing factors such as residual stresses created by the coefficient of thermal expansion mismatch between dental ceramics and Ti frameworks can be avoided with Ag interlayers.
Resumo:
Tutkimuksen tarkoituksena oli selvittää kuumetta vastaavan elinviljelylämpötilan vaikutusta hiiren poskihampaiden kiilteen kehittymiseen. Tutkimus tehtiin in vitro ja siinä käytettiin E18- hiiriä, joiden hampaita kasvatettiin ´kuumeessa´ (39 °C) kolmannesta kasvatuspäivästä lähtien, osaa viisi ja osaa kolme päivää. Kontrollihampaita kasvatettiin 37 °C:ssa. Hampaita kasvatettiin yhteensä 11 päivää ja lopuksi ne kuvattiin. Stereomikroskooppikuvista mitattiin kiilteen korkeus ja kruunun korkeus ja laskettiin näiden suhde. Hampaat demineralisoitiin, valettiin parafiiniin, leikattiin leikkeiksi ja värjättiin HE-värjäyksellä. Leikkeistä mitattiin kiilteen paksuus ja kiilteen ja dentiinin yhteispaksuus ja laskettiin näiden suhde. Arvoja verrattiin kasvatusryhmien kesken. Tulokset analysoitiin Mann-Whitney-testillä. Kiilteen paksuus suhteessa kiilteen ja dentiinin yhteispaksuuteen oli pienempi ´kuumehampaissa´. Viisi tai kolme päivää ´kuumeessa´kasvatettujen hampaiden välillä ei ollut juurikaan eroja. Kiilteen korkeus suhteessa kruunun korkeuteen oli pienempi ´kuumehampaissa´ kuin kontrollihampaissa. Korkea lämpötila ei muutoin näyttänyt vaikuttavan hampaiden kehitykseen. Tutkimuksen perusteella voidaan sanoa, että kasvatuslämpötilan nosto kuumeen tasolle aiheuttaa hiiren molaarihampaan kiilteen kehityksen häiriintymistä. Tulos tukee kliinisiä havaintoja, joiden mukaan korkea kuume lapsella voi aiheuttaa kiilteen kehityshäiriöitä.
Resumo:
Dioxins are organic toxicants that are known to impair tooth development, especially dental hard tissue formation. The most toxic dioxin congener is 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD). Further, clinical studies suggest that maternal smoking during pregnancy can affect child s tooth development. One of the main components of tobacco smoke is the group of non-halogenated polycyclic aromatic hydrocarbons (PAHs), a representative of which is 7,12-dimethylbenz[a]anthracene (DMBA). Tributyltin (TBT), an organic tin compound, has been shown to impair bone mineralization in experimental animals. In addition to exposure to organic toxicants, a well-established cause for enamel hypomineralization is excess fluoride intake. The principal aim of this thesis project was to examine in vitro if, in addition to dioxins, other organic environmental toxicants, like PAHs and organic tin compounds, have adverse effects on tooth development, specifically on formation and mineralization of the major dental hard tissues, the dentin and the enamel. The second aim was to investigate in vitro if fluoride could intensify the manifestation of the detrimental developmental dental effects elicited by TCDD. The study was conducted by culturing mandibular first and second molar tooth germs of E18 NMRI mouse embryos in a Trowell-type organ culture and exposing them to DMBA, TBT, and sodium fluoride (NaF) and/or TCDD at various concentrations during the secretory and mineralization stages of development. Specific methods used were HE-staining for studying cell and tissue morphology, BrdU-staining for cell proliferation, TUNEL-staining for apoptosis, and QPCR, in situ hybridization and immunohistochemistry for the expressions of selected genes associated with mineralization. This thesis work showed that DMBA, TBT, TCDD and NaF interfere with dentin and enamel formation of embryonic mouse tooth in vitro, and that fluoride can potentiate the harmful effect of TCDD. The results suggested that adverse effects of TBT involve altered expression of genes associated with mineralization, and that DMBA and TBT as well as NaF and TCDD together primarily affect dentin mineralization. Since amelogenesis does not start until mineralization of dentin begins, impaired enamel matrix secretion could be a secondary effect. Dioxins, PAHs and organotins are all liposoluble and can be transferred to the infant by breast-feeding. Since doses are usually very low, developmental toxicity on most of the organs is difficult to indentify clinically. However, tooth may act as an indicator of exposure, since the major dental hard tissues, the dentin and the enamel, are not replaced once they have been formed. Thus, disturbed dental hard tissue formation raises the question of more extensive developmental toxicity.
Resumo:
Chronic periodontitis results from a complex aetiology, including the formation of a subgingival biofilm and the elicitation of the host s immune and inflammatory response. The hallmark of chronic periodontitis is alveolar bone loss and soft periodontal tissue destruction. Evidence supports that periodontitis progresses in dynamic states of exacerbation and remission or quiescence. The major clinical approach to identify disease progression is the tolerance method, based on sequential probing. Collagen degradation is one of the key events in periodontal destructive lesions. Matrix metalloproteinase (MMP)-8 and MMP-13 are the primary collagenolytic MMPs that are associated with the severity of periodontal inflammation and disease, either by a direct breakdown of the collagenised matrix or by the processing of non-matrix bioactive substrates. Despite the numerous host mediators that have been proposed as potential biomarkers for chronic periodontitis, they reflect inflammation rather than the loss of periodontal attachment. The aim of the present study was to determine the key molecular MMP-8 and -13 interactions in gingival crevicular fluid (GCF) and gingival tissue from progressive periodontitis lesions and MMP-8 null allele mouse model. In study (I), GCF and gingival biopsies from active and inactive sites of chronic periodontitis patients, which were determined clinically by the tolerance method, and healthy GCF were analysed for MMP-13 and tissue inhibitor of matrix metalloproteinases (TIMP)-1. Chronic periodontitis was characterised by increased MMP-13 levels and the active sites showed a tendency of decreased TIMP-1 levels associated with increments of MMP-13 and total protein concentration compared to inactive sites. In study (II), we investigated whether MMP-13 activity was associated with TIMP-1, bone collagen breakdown through ICTP levels, as well as the activation rate of MMP-9 in destructive lesions. The active sites demonstrated increased GCF ICTP levels as well as lowered TIMP-1 detection along with elevated MMP-13 activity. MMP-9 activation rate was enhanced by MMP-13 in diseased gingival tissue. In study (III), we analysed the potential association between the levels, molecular forms, isoenzyme distribution and degree of activation of MMP-8, MMP-14, MPO and the inhibitor TIMP-1 in GCF from periodontitis progressive patients at baseline and after periodontal therapy. A positive correlation was found for MPO/MMP-8 and their levels associated with progression episodes and treatment response. Because MMP-8 is activated by hypochlorous acid in vitro, our results suggested an interaction between the MPO oxidative pathway and MMP-8 activation in GCF. Finally, in study (IV), on the basis of the previous finding that MMP-8-deficient mice showed impaired neutrophil responses and severe alveolar bone loss, we aimed to characterise the detection patterns of LIX/CXCL5, SDF-1/CXCL12 and RANKL in P. gingivalis-induced experimental periodontitis and in the MMP-8-/- murine model. The detection of neutrophil-chemoattractant LIX/CXCL5 was restricted to the oral-periodontal interface and its levels were reduced in infected MMP-8 null mice vs. wild type mice, whereas the detection of SDF-1/CXCL12 and RANKL in periodontal tissues increased in experimentally-induced periodontitis, irrespectively from the genotype. Accordingly, MMP-8 might regulate LIX/CXCL5 levels by undetermined mechanisms, and SDF-1/CXCL12 and RANKL might promote the development and/or progression of periodontitis.
Resumo:
This dissertation examines the impacts of energy and climate policies on the energy and forest sectors, focusing on the case of Finland. The thesis consists of an introduction article and four separate studies. The dissertation was motivated by the climate concern and the increasing demand of renewable energy. In particular, the renewable energy consumption and greenhouse gas emission reduction targets of the European Union were driving this work. In Finland, both forest and energy sectors are in key roles in achieving these targets. In fact, the separation between forest and energy sector is diminishing as the energy sector is utilizing increasing amounts of wood in energy production and as the forest sector is becoming more and more important energy producer. The objective of this dissertation is to find out and measure the impacts of climate and energy policies on the forest and energy sectors. In climate policy, the focus is on emissions trading, and in energy policy the dissertation focuses on the promotion of renewable forest-based energy use. The dissertation relies on empirical numerical models that are based on microeconomic theory. Numerical partial equilibrium mixed complementarity problem models were constructed to study the markets under scrutiny. The separate studies focus on co-firing of wood biomass and fossil fuels, liquid biofuel production in the pulp and paper industry, and the impacts of climate policy on the pulp and paper sector. The dissertation shows that the policies promoting wood-based energy may have have unexpected negative impacts. When feed-in tariff is imposed together with emissions trading, in some plants the production of renewable electricity might decrease as the emissions price increases. The dissertation also shows that in liquid biofuel production, investment subsidy may cause high direct policy costs and other negative impacts when compared to other policy instruments. The results of the dissertation also indicate that from the climate mitigation perspective, perfect competition is the favored wood market competition structure, at least if the emissions trading system is not global. In conclusion, this dissertation suggests that when promoting the use of wood biomass in energy production, the favored policy instruments are subsidies that promote directly the renewable energy production (i.e. production subsidy, renewables subsidy or feed-in premium). Also, the policy instrument should be designed to be dependent on the emissions price or on the substitute price. In addition, this dissertation shows that when planning policies to promote wood-based renewable energy, the goals of the policy scheme should be clear before decisions are made on the choice of the policy instruments.
Resumo:
The amount of reactive power margin available in a system determines its proximity to voltage instability under normal and emergency conditions. More the reactive power margin, better is the systems security and vice-versa. A hypothetical way of improving the reactive margin of a synchronous generator is to reduce the real power generation within its mega volt-ampere (MVA) ratings. This real power generation reduction will affect its power contract agreements entered in the electricity market. Owing to this, the benefit that the generator foregoes will have to be compensated by paying them some lost opportunity cost. The objective of this study is three fold. Firstly, the reactive power margins of the generators are evaluated. Secondly, they are improved using a reactive power optimization technique and optimally placed unified power flow controllers. Thirdly, the reactive power capacity exchanges along the tie-lines are evaluated under base case and improved conditions. A detailed analysis of all the reactive power sources and sinks scattered throughout the network is carried out in the study. Studies are carried out on a real life, three zone, 72-bus equivalent Indian southern grid considering normal and contingency conditions with base case operating point and optimised results presented.
Resumo:
In this paper we have assessed the availability of land and the potential for biomass production in India to meet various demands for biomass, including modern bioenergy. This is estimated by considering the various demands on land and its suitability. The biomass production potential of energy plantations is assessed for different agroecological zones. The total woody biomass production is estimated to be 321 Mt, based on biomass productivity in the range 2 to 17 t/ha/yr for the different agro-ecological zones and considering the conservative estimate of 43 Mha land availability for biomass production. A surplus of 231 Mt of biomass (after meeting the increased demand for fuelwood and timber by the year 2010) is estimated to be available for energy, which has an electricity generation potential of 231 TWh. As a first step, only the feasible physical potential of biomass production is assessed, along with an analysis of barriers. The potential costs and benefits of biomass production strategy are not analysed. (C) 1999 Elsevier Science Ltd. All rights reserved.