Luminescence-based assay methods in drug discovery

The drug discovery process is facing new challenges in the evaluation process of the lead compounds as the number of new compounds synthesized is increasing. The potentiality of test compounds is most frequently assayed through the binding of the test compound to the target molecule or receptor, or measuring functional secondary effects caused by the test compound in the target model cells, tissues or organism. Modern homogeneous high-throughput-screening (HTS) assays for purified estrogen receptors (ER) utilize various luminescence based detection methods. Fluorescence polarization (FP) is a standard method for ER ligand binding assay. It was used to demonstrate the performance of two-photon excitation of fluorescence (TPFE) vs. the conventional one-photon excitation method. As result, the TPFE method showed improved dynamics and was found to be comparable with the conventional method. It also held potential for efficient miniaturization. Other luminescence based ER assays utilize energy transfer from a long-lifetime luminescent label e.g. lanthanide chelates (Eu, Tb) to a prompt luminescent label, the signal being read in a time-resolved mode. As an alternative to this method, a new single-label (Eu) time-resolved detection method was developed, based on the quenching of the label by a soluble quencher molecule when displaced from the receptor to the solution phase by an unlabeled competing ligand. The new method was paralleled with the standard FP method. It was shown to yield comparable results with the FP method and found to hold a significantly higher signal-tobackground ratio than FP. Cell-based functional assays for determining the extent of cell surface adhesion molecule (CAM) expression combined with microscopy analysis of the target molecules would provide improved information content, compared to an expression level assay alone. In this work, immune response was simulated by exposing endothelial cells to cytokine stimulation and the resulting increase in the level of adhesion molecule expression was analyzed on fixed cells by means of immunocytochemistry utilizing specific long-lifetime luminophore labeled antibodies against chosen adhesion molecules. Results showed that the method was capable of use in amulti-parametric assay for protein expression levels of several CAMs simultaneously, combined with analysis of the cellular localization of the chosen adhesion molecules through time-resolved luminescence microscopy inspection.

Possibilities and challenges of longitudinal studies in operations management

Longitudinal studies are quite rare in the area of Operations Management. One reason might be the time needed to conduct such studies, and then the lack of experience and real-life examples and results. The aim of the thesis is to examine longitudinal studies in the area of OM and the possible advantages, challenges and pitfalls of such studies. A longitudinal benchmarking study, Made in Finland, was analyzed in terms of the study methodology and its outcomes. The timeline of this longitudinal study is interesting. The first study was made in 1993, the second in 2004 and the third in 2010. Between these studies some major changes occurred in the Finnish business environment. Between the first and second studies, Finland joined the ETA and the EU, and globalization started with the rise of the Internet era, while between the second and third studies financial turmoil started in 2007. The sample and cases used in this study were originally 23 manufacturing sites in Finland. These sites were interviewed in 1993, in 2004 and 2010. One important and interesting aspect is that all the original sites participated in 2004, and 19 sites were still able to participate in 2010. Four sites had been closed and/or moved abroad. All of this gave a good opportunity to study the changes that occurred in the Finnish manufacturing sites and their environment, and how they reacted to these changes, and the effects on their performance. It is very seldom, if ever, that the same manufacturing sites have been studied in a longitudinal setting by using three data points. The results of this study are thus unique, and the experience gained is valuable for practitioners.

Application of Computational Fluid Dynamics in Modeling Blood Flow in Human Thoracic Aorta

The aim of this study was to simulate blood flow in thoracic human aorta and understand the role of flow dynamics in the initialization and localization of atherosclerotic plaque in human thoracic aorta. The blood flow dynamics in idealized and realistic models of human thoracic aorta were numerically simulated in three idealized and two realistic thoracic aorta models. The idealized models of thoracic aorta were reconstructed with measurements available from literature, and the realistic models of thoracic aorta were constructed by image processing Computed Tomographic (CT) images. The CT images were made available by South Karelia Central Hospital in Lappeenranta. The reconstruction of thoracic aorta consisted of operations, such as contrast adjustment, image segmentations, and 3D surface rendering. Additional design operations were performed to make the aorta model compatible for the numerical method based computer code. The image processing and design operations were performed with specialized medical image processing software. Pulsatile pressure and velocity boundary conditions were deployed as inlet boundary conditions. The blood flow was assumed homogeneous and incompressible. The blood was assumed to be a Newtonian fluid. The simulations with idealized models of thoracic aorta were carried out with Finite Element Method based computer code, while the simulations with realistic models of thoracic aorta were carried out with Finite Volume Method based computer code. Simulations were carried out for four cardiac cycles. The distribution of flow, pressure and Wall Shear Stress (WSS) observed during the fourth cardiac cycle were extensively analyzed. The aim of carrying out the simulations with idealized model was to get an estimate of flow dynamics in a realistic aorta model. The motive behind the choice of three aorta models with distinct features was to understand the dependence of flow dynamics on aorta anatomy. Highly disturbed and nonuniform distribution of velocity and WSS was observed in aortic arch, near brachiocephalic, left common artery, and left subclavian artery. On the other hand, the WSS profiles at the roots of branches show significant differences with geometry variation of aorta and branches. The comparison of instantaneous WSS profiles revealed that the model with straight branching arteries had relatively lower WSS compared to that in the aorta model with curved branches. In addition to this, significant differences were observed in the spatial and temporal profiles of WSS, flow, and pressure. The study with idealized model was extended to study blood flow in thoracic aorta under the effects of hypertension and hypotension. One of the idealized aorta models was modified along with the boundary conditions to mimic the thoracic aorta under the effects of hypertension and hypotension. The results of simulations with realistic models extracted from CT scans demonstrated more realistic flow dynamics than that in the idealized models. During systole, the velocity in ascending aorta was skewed towards the outer wall of aortic arch. The flow develops secondary flow patterns as it moves downstream towards aortic arch. Unlike idealized models, the distribution of flow was nonplanar and heavily guided by the artery anatomy. Flow cavitation was observed in the aorta model which was imaged giving longer branches. This could not be properly observed in the model with imaging containing a shorter length for aortic branches. The flow circulation was also observed in the inner wall of the aortic arch. However, during the diastole, the flow profiles were almost flat and regular due the acceleration of flow at the inlet. The flow profiles were weakly turbulent during the flow reversal. The complex flow patterns caused a non-uniform distribution of WSS. High WSS was distributed at the junction of branches and aortic arch. Low WSS was distributed at the proximal part of the junction, while intermedium WSS was distributed in the distal part of the junction. The pulsatile nature of the inflow caused oscillating WSS at the branch entry region and inner curvature of aortic arch. Based on the WSS distribution in the realistic model, one of the aorta models was altered to induce artificial atherosclerotic plaque at the branch entry region and inner curvature of aortic arch. Atherosclerotic plaque causing 50% blockage of lumen was introduced in brachiocephalic artery, common carotid artery, left subclavian artery, and aortic arch. The aim of this part of the study was first to study the effect of stenosis on flow and WSS distribution, understand the effect of shape of atherosclerotic plaque on flow and WSS distribution, and finally to investigate the effect of lumen blockage severity on flow and WSS distributions. The results revealed that the distribution of WSS is significantly affected by plaque with mere 50% stenosis. The asymmetric shape of stenosis causes higher WSS in branching arteries than in the cases with symmetric plaque. The flow dynamics within thoracic aorta models has been extensively studied and reported here. The effects of pressure and arterial anatomy on the flow dynamic were investigated. The distribution of complex flow and WSS is correlated with the localization of atherosclerosis. With the available results we can conclude that the thoracic aorta, with complex anatomy is the most vulnerable artery for the localization and development of atherosclerosis. The flow dynamics and arterial anatomy play a role in the localization of atherosclerosis. The patient specific image based models can be used to diagnose the locations in the aorta vulnerable to the development of arterial diseases such as atherosclerosis.

Rocking the Euro boat: scheduled market announcements' effects on Euro implied volatility

The purpose of this thesis is to investigate scheduled market announcements’ effects on Euro implied volatility. Timeline selected for this study ranges from 2005 to 2009. The method chosen is so-called event study approach, in which five days prior to a news announcement stand for a pre-event period, and five days after the announcement form a post-event period. Statistical research method employed is Mann-Whitney-Wilcoxon test, which examines two evenly-sized distributions’ equality, in this case the distributions being the pre- and post-event periods. Observations are based on daily data of US dollar nominated Euro at-the-money call options. Research results partially back up previous literature’s view of uncertainty increasing prior to the news announcement. After the exact contents of the news is public, uncertainty levels measured by implied volatility tend to lower.

Effects of thermal environment and supplementation levels on the physiological parameters of moxotó goats in confined and semi-confined rising systems

The objective of this work was to determine the effect of environmental variables and supplementation levels on physiological parameters of Moxotó goats in confined and semi-confined rising systems, in the Brazilian semi-arid region. The semi-confined individuals were kept on a grass based diet during the day and arrested in the end of the afternoon. The confined animals were kept in a management center, receiving two diets composed by forage cactus and maniçoba hay into two different levels (0.5 and 1.5% of the body weight). Inside the management center and in the external environment the environmental comfort parameters were set high during the afternoon period characterizing a situation of thermal discomfort for the animals. During the morning the semi-confined animals presented an average respiratory frequency (69.5 mov min-1) and rectal temperature (39.5 ºC) higher than the confined ones (62.6 mov min-1 and 39.0 ºC, respectively). The confined and semi-confined animals were able to maintain their rectal temperature within normal limits, with increase in the cardiac beatings rate and respiratory frequency. The greater percentage of the used supplementations (1.5%) seemed to increase rectal temperature in the two studied rising systems.

Integrated multivariate analysis to evaluate effects of pre-slaughter handling on pork quality

The aim of this study was to investigate the effect of pre-slaughter handling on the occurrence of PSE (Pale, Soft, and Exudative) meat in swine slaughtered at a commercial slaughterhouse located in the metropolitan region of Dourados, Mato Grosso do Sul, Brazil. Based on the database (n=1,832 carcasses), it was possible to apply the integrated multivariate analysis for the purpose of identifying, among the selected variables, those of greatest relevance to this study. Results of the Principal Component Analysis showed that the first five components explained 89.28% of total variance. In the Factor Analysis, the first factor represented the thermal stress and fatiguing conditions for swine during pre-slaughter handling. In general, this study indicated the importance of the pre-slaughter handling stages, evidencing those of greatest stress and threat to animal welfare and pork quality, which are transport time, resting period, lairage time before unloading, unloading time, and ambience.

Effects of Country of Origin on Consumer Product Evaluations: Finnish clothing products in the minds of Russian tourists

Companies operating in today’s highly internationalized markets consider product differentiation the key priority in pursue to attain a constant competitive advantage in challenging global environment (Baker and Ballington 2002, 158). The main driver affecting companies’ differentiation actions was described as early as 1912 by one of the marketing pioneers A. W. Shaw (1912, 710) as meeting human wants more accurate than the competition, and thus increasing customers’ perceived value and satisfaction. Dickson and Ginter (1987, 2) point out in their study based on earlier research by Chamberlin (1965) and Porter (1976) that differentiation can be based on either tangible characteristics of a product such as design or intangible characteristics such as a brand name and country of origin (hereafter referred to as COO). The concept of COO and its impact on consumers’ evaluation of a product as an extrinsic product cue has been one of the most noteworthy topics in international marketing, having been voluminously examined by over 780 authors in more than 750 academic publications in the past 40 years (Papadopoulos and Heslop 2002, 294). Many of these studies accentuate the significant effect the COO has on consumers’ product attribute evaluations. People routinely associate country images with products and services in order to judge and categorize them based on perceived quality and risk levels; thereby COO can influence the likelihood of a purchase (Peterson and Jolibert 1995, 883-884; Verlegh and Steenkamp 1999, 523). Based on the vast research related to COO in the field of international business, it is widely recognized that the country associated with a product can act in a similar way as the name of a brand and even become a part of product’s total image. Thereby depending on customer’s values and perceptions, the product-country image can either increase or decrease perceived value.

Creating possibilities for collective creativity : Brokerage Functions in Practice-Based Innovation

In the network era, creative achievements like innovations are more and more often created in interaction among different actors. The complexity of today‘s problems transcends the individual human mind, requiring not only individual but also collective creativity. In collective creativity, it is impossible to trace the source of new ideas to an individual. Instead, creative activity emerges from the collaboration and contribution of many individuals, thereby blurring the contribution of specific individuals in creating ideas. Collective creativity is often associated with diversity of knowledge, skills, experiences and perspectives. Collaboration between diverse actors thus triggers creativity and gives possibilities for collective creativity. This dissertation investigates collective creativity in the context of practice-based innovation. Practice-based innovation processes are triggered by problem setting in a practical context and conducted in non-linear processes utilising scientific and practical knowledge production and creation in cross-disciplinary innovation networks. In these networks diversity or distances between innovation actors are essential. Innovation potential may be found in exploiting different kinds of distances. This dissertation presents different kinds of distances, such as cognitive, functional and organisational which could be considered as sources of creativity and thus innovation. However, formation and functioning of these kinds of innovation networks can be problematic. Distances between innovating actors may be so great that a special interpretation function is needed – that is, brokerage. This dissertation defines factors that enhance collective creativity in practice-based innovation and especially in the fuzzy front end phase of innovation processes. The first objective of this dissertation is to study individual and collective creativity at the employee level and identify those factors that support individual and collective creativity in the organisation. The second objective is to study how organisations use external knowledge to support collective creativity in their innovation processes in open multi-actor innovation. The third objective is to define how brokerage functions create possibilities for collective creativity especially in the context of practice-based innovation. The research objectives have been studied through five substudies using a case-study strategy. Each substudy highlights various aspects of creativity and collective creativity. The empirical data consist of materials from innovation projects arranged in the Lahti region, Finland, or materials from the development of innovation methods in the Lahti region. The Lahti region has been chosen as the research context because the innovation policy of the region emphasises especially the promotion of practice-based innovations. The results of this dissertation indicate that all possibilities of collective creativity are not utilised in internal operations of organisations. The dissertation introduces several factors that could support collective creativity in organisations. However, creativity as a social construct is understood and experienced differently in different organisations, and these differences should be taken into account when supporting creativity in organisations. The increasing complexity of most potential innovations requires collaborative creative efforts that often exceed the boundaries of the organisation and call for the involvement of external expertise. In practice-based innovation different distances are considered as sources of creativity. This dissertation gives practical implications on how it is possible to exploit different kinds of distances knowingly. It underlines especially the importance of brokerage functions in open, practice-based innovation in order to create possibilities for collective creativity. As a contribution of this dissertation, a model of brokerage functions in practice-based innovation is formulated. According to the model, the results and success of brokerage functions are based on the context of brokerage as well as the roles, tasks, skills and capabilities of brokers. The brokerage functions in practice-based innovation are also possible to divide into social and cognitive brokerage.

The Possibilities and Dosimetric Limitations of MLC-Based Intensity-Modulated Radiotherapy Delivery and Optimization Techniques

The use of intensity-modulated radiotherapy (IMRT) has increased extensively in the modern radiotherapy (RT) treatments over the past two decades. Radiation dose distributions can be delivered with higher conformality with IMRT when compared to the conventional 3D-conformal radiotherapy (3D-CRT). Higher conformality and target coverage increases the probability of tumour control and decreases the normal tissue complications. The primary goal of this work is to improve and evaluate the accuracy, efficiency and delivery techniques of RT treatments by using IMRT. This study evaluated the dosimetric limitations and possibilities of IMRT in small (treatments of head-and-neck, prostate and lung cancer) and large volumes (primitive neuroectodermal tumours). The dose coverage of target volumes and the sparing of critical organs were increased with IMRT when compared to 3D-CRT. The developed split field IMRT technique was found to be safe and accurate method in craniospinal irradiations. By using IMRT in simultaneous integrated boosting of biologically defined target volumes of localized prostate cancer high doses were achievable with only small increase in the treatment complexity. Biological plan optimization increased the probability of uncomplicated control on average by 28% when compared to standard IMRT delivery. Unfortunately IMRT carries also some drawbacks. In IMRT the beam modulation is realized by splitting a large radiation field to small apertures. The smaller the beam apertures are the larger the rebuild-up and rebuild-down effects are at the tissue interfaces. The limitations to use IMRT with small apertures in the treatments of small lung tumours were investigated with dosimetric film measurements. The results confirmed that the peripheral doses of the small lung tumours were decreased as the effective field size was decreased. The studied calculation algorithms were not able to model the dose deficiency of the tumours accurately. The use of small sliding window apertures of 2 mm and 4 mm decreased the tumour peripheral dose by 6% when compared to 3D-CRT treatment plan. A direct aperture based optimization (DABO) technique was examined as a solution to decrease the treatment complexity. The DABO IMRT technique was able to achieve treatment plans equivalent with the conventional IMRT fluence based optimization techniques in the concave head-and-neck target volumes. With DABO the effective field sizes were increased and the number of MUs was reduced with a factor of two. The optimality of a treatment plan and the therapeutic ratio can be further enhanced by using dose painting based on regional radiosensitivities imaged with functional imaging methods.

Improving strategic decision-making with simulation based decision support systems

Combating climate change is one of the key tasks of humanity in the 21st century. One of the leading causes is carbon dioxide emissions due to usage of fossil fuels. Renewable energy sources should be used instead of relying on oil, gas, and coal. In Finland a significant amount of energy is produced using wood. The usage of wood chips is expected to increase in the future significantly, over 60 %. The aim of this research is to improve understanding over the costs of wood chip supply chains. This is conducted by utilizing simulation as the main research method. The simulation model utilizes both agent-based modelling and discrete event simulation to imitate the wood chip supply chain. This thesis concentrates on the usage of simulation based decision support systems in strategic decision-making. The simulation model is part of a decision support system, which connects the simulation model to databases but also provides a graphical user interface for the decisionmaker. The main analysis conducted with the decision support system concentrates on comparing a traditional supply chain to a supply chain utilizing specialized containers. According to the analysis, the container supply chain is able to have smaller costs than the traditional supply chain. Also, a container supply chain can be more easily scaled up due to faster emptying operations. Initially the container operations would only supply part of the fuel needs of a power plant and it would complement the current supply chain. The model can be expanded to include intermodal supply chains as due to increased demand in the future there is not enough wood chips located close to current and future power plants.

Music digitalization and its effects on the Finnish music industry stakeholders

For the past two decades the music digitalization has been considered the most significant phenomenon in the music industry as the physical sales have been decreasing rapidly. The advancement of the digital technology and the internet have facilitated the digitalization in the music industry and affected all stages of the music value chain, namely music creation, distribution and consumption. The newly created consumer culture has led to the establishment of novel business models such as music subscriptions and à-la-carte downloads websites and live streaming. The dynamic digital environment has presented the music industry stakeholders with the challenge to adapt to the requirements of the constantly changing modern consumers’ needs and demands. The purpose of this study was to identify how music digitalization can influence change in the Finnish music industry value chain; i.e. how digitalization affects the music industry stakeholders, their functions and inter-relatedness and how the stakeholders are able to react to the changes in the industry. The study was conducted as a qualitative research based entirely on primary data in the form of semi-structured interviews with experts from different units of the Finnish music industry value chain. Since the study offers assessment of diverse viewpoints on the value chain, it further provides an integrated picture of the Finnish music industry current situation and its competitive environment. The results suggest that the music industry is currently in a turbulent stage of experimentation with new business models and digital innovations. However, at this point it is impossible to determine which business model will be approved by the consumers in the longer run. Nevertheless, the study confirmed the claim that consumption of music in its digital form is to become dominant over the traditional physical copies sales in the nearest future. As a result the music industry is becoming more user-oriented; that is the focus is shifting from music production towards artist branding and management and visibility to the audience. Furthermore, the music industry is undergoing the process of integration with other industries such as media, social networks, internet services providers and mobile phone manufacturers in order to better fulfill the consumers’ needs. The previously underrated live music and merchandising are also increasing their significance for the revenues in the stagnant music markets. Therefore, the music industry is developing at present towards becoming an integrated entertainment industry deeply penetrating every point of modern people’s leisure activities.

Working capital management in the small and medium-sized enterprises Case: Project-based business environment in Flowrox Oy

This Master´s thesis illustrates how growing a business ties up the company´s working capital and what the cost of committed capital. In order to manage a company´s working capital in rapid business growth phase, the thesis suggests that by monitoring and managing the operating and cash conversion cycles of customers´ projects, a company can find ways to secure the required amount of capital. The research method of this thesis was based on literature reviews and case study research. The theoretical review presents the concepts of working capital and provides the background for understanding how to improve working capital management. The company in subject is a global small and medium-sized enterprise that manufactures pumps and valves for demanding process conditions. The company is expanding, which creates lots of challenges. This thesis concentrates to the company´s working capital management and its efficiency through the supply chain and value chain perspective. The main elements of working capital management are inventory management, accounts receivable management and accounts payable management. Prepayments also play a significant role, particularly in project-based businesses. Developing companies´ working capital management requires knowledge from different kind of key operations´ in the company, like purchasing, production, sales, logistics and financing. The perspective to develop and describe working capital management is an operational. After literature reviews the thesis present pilot projects that formed the basis of a model to monitor working capital in the case company. Based on analysis and pilot projects, the thesis introduces a rough model for monitoring capital commitments in short time period. With the model the company can more efficiently monitor and manage their customer projects.

Effects of splenic allograft in lipid profile of non-splenectomized rats: the immune and metabolic role of the "double spleen"

OBJECTIVE: To elucidate the role of the spleen and splenic allograft in lipid control and evaluate its effect on the lipid profile of rats.METHOD: 32 male Wistar rats were randomly assigned into four groups: control group (1), total splenectomy group (2), splenectomy and implantation of allograft group (3) and double spleen group (4). Each group was subdivided into two subgroups: A and B, based on the death of the animals after 30 or 120 days of monitoring. The procedures in groups 2, 3 and 4 were made simultaneously, and splenectomized animals, groups 2 and 3 were donors, respectively, for the animals of groups 3 and 4. In group 4 the spleen was preserved and the animals received implants from the spleens of rats from group 3. The regeneration of splenic tissue was evaluated by macroscopic and microscopic analyzes of the grafts and own spleens, as well as with measurements of VLDL, HDL, LDL, total cholesterol and triglycerides.RESULTS: after 120 days, Group 4 showed levels of total cholesterol and LDL lower than the other groups. Group 1 had higher levels of lipids.CONCLUSION: The technique of double spleen was effective in the control of lipid metabolism, corroborating the function of the spleen as a reserve of lipids.

Internet-based breast cancer patient’s pathway as an empowering patient educational tool

This three-phase study was conducted to examine the effect of the Breast Cancer Patient’s Pathway program (BCPP) on breast cancer patients’ empowering process from the viewpoint of the difference between knowledge expectations and perceptions of received knowledge, knowledge level, quality of life, anxiety and treatment-related side effects during the breast cancer treatment process. The BCPP is an Internet-based patient education tool describing a flow chart of the patient pathway during the breast treatment process, from breast cancer diagnostic tests to the follow-up after treatments. The ultimate goal of this study was to evaluate the effect of the BCPP to the breast cancer patient’s empowerment by using the patient pathway as a patient education tool. In phase I, a systematic literature review was carried out to chart the solutions and outcomes of Internet-based educational programs for breast cancer patients. In phase II, a Delphi study was conducted to evaluate the usability of web pages and adequacy of their content. In phase III, the BCPP program was piloted with 10 patients and patients were randomised to an intervention group (n=50) and control group (n=48). According to the results of this study, the Internet is an effective patient education tool for increasing knowledge, and BCPP can be used as a patient education method supporting other education methods. However, breast cancer patients’ perceptions of received knowledge were not fulfilled; their knowledge expectations exceed the perceived amount of received knowledge. Although control group patients’ knowledge expectations were met better with the knowledge they received in hospital compared to the patients in the intervention group, no statistical differences were found between the groups in terms of quality of life, anxiety and treatment-related side effects. However, anxiety decreased faster in the intervention group when looking at internal differences between the groups at different measurement times. In the intervention group the relationship between the difference between knowledge expectations and perceptions of received knowledge correlated significantly with quality of life and anxiety. Their knowledge level was also significant higher than in the control group. These results support the theory that the empowering process requires patient’s awareness of knowledge expectations and perceptions of received knowledge. There is a need to develop patient education to meet patients’ perceptions of received knowledge, including oral and written education and BCPP, to fulfil patient’s knowledge expectations and facilitate the empowering process. Further research is needed on the process of cognitive empowerment with breast cancer patients. There is a need for new patient education methods to increase breast cancer patients’ awareness of knowing.