GROWTH AND YIELD RESPONSE OF MAIZE (Zea mays) TO INTER AND INTRA-ROW WEED COMPETITION UNDER DIFFERENT FERTILIZER APPLICATION METHODS

A field experiment was conducted for two consecutive years to study the effect of fertilizer application methods and inter and intra-row weed-crop competition durations on density and biomass of different weeds and growth, grain yield and yield components of maize. The experimental treatments comprised of two fertilizer application methods (side placement and below seed placement) and inter and intra-row weed-crop competition durations each for 15, 30, 45, and 60 days after emergence, as well as through the crop growing period. Fertilizer application method didn't affect weed density, biomass, and grain yield of maize. Below seed fertilizer placement generally resulted in less mean weed dry weight and more crop leaf area index, growth rate, grain weight per cob and 1000 grain weight. Minimum number of weeds and dry weight were recorded in inter-row or intra-row weed-crop competition for 15 DAE. Number of cobs per plant, grain weight per cob, 1000 grain weight and grain yield decreased with an increase in both inter-row and intra-row weed-crop competition durations. Maximum mean grain yield of 6.35 and 6.33 tha-1 were recorded in inter-row and intra-row weed competition for 15 DAE, respectively.

LVDC power distribution system: computational modelling

In the doctoral dissertation, low-voltage direct current (LVDC) distribution system stability, supply security and power quality are evaluated by computational modelling and measurements on an LVDC research platform. Computational models for the LVDC network analysis are developed. Time-domain simulation models are implemented in the time-domain simulation environment PSCAD/EMTDC. The PSCAD/EMTDC models of the LVDC network are applied to the transient behaviour and power quality studies. The LVDC network power loss model is developed in a MATLAB environment and is capable of fast estimation of the network and component power losses. The model integrates analytical equations that describe the power loss mechanism of the network components with power flow calculations. For an LVDC network research platform, a monitoring and control software solution is developed. The solution is used to deliver measurement data for verification of the developed models and analysis of the modelling results. In the work, the power loss mechanism of the LVDC network components and its main dependencies are described. Energy loss distribution of the LVDC network components is presented. Power quality measurements and current spectra are provided and harmonic pollution on the DC network is analysed. The transient behaviour of the network is verified through time-domain simulations. DC capacitor guidelines for an LVDC power distribution network are introduced. The power loss analysis results show that one of the main optimisation targets for an LVDC power distribution network should be reduction of the no-load losses and efficiency improvement of converters at partial loads. Low-frequency spectra of the network voltages and currents are shown, and harmonic propagation is analysed. Power quality in the LVDC network point of common coupling (PCC) is discussed. Power quality standard requirements are shown to be met by the LVDC network. The network behaviour during transients is analysed by time-domain simulations. The network is shown to be transient stable during large-scale disturbances. Measurement results on the LVDC research platform proving this are presented in the work.

Potential of twenty exotic germplasms to improve Brazilian maize architecture

Temperate and temperate x tropical germplasms were introduced into the maize breeding of the Department of Genetics (ESALQ-USP). Twenty populations designated as P-1 to P-20 and a check population were evaluated in a randomized complete block design with two replications at Piracicaba, SP, Brazil. Plots were 2.0 m long, spaced 1.0 m apart, with 10 plants per plot after thinning. The following traits were evaluated: PH, plant height; EH, ear height; TB, tassel branch number; KW, 100 kernels weight; EL, ear length; ED, ear diameter; KR, kernels per row, and RN, number of rows of kernels. The means of the exotic populations showed a variation in performance for all traits. The population means were greater than check means for KW, EL, and KR. Populations P-9, P-10, P-12, and P-13 showed low relative ear placement values (EH/PH index), indicating that these materials could contribute to lower ear placement in local populations. P-1 and P-9 showed a high potential to reduce TB. The phenotypic correlation coefficients among populations were positive for most combinations, except for RN with PH, EH, TB, and KW. Predictions of 19 composite means were obtained for all traits.

A pulsatile flow model for in vitro quantitative evaluation of prosthetic valve regurgitation

A pulsatile pressure-flow model was developed for in vitro quantitative color Doppler flow mapping studies of valvular regurgitation. The flow through the system was generated by a piston which was driven by stepper motors controlled by a computer. The piston was connected to acrylic chambers designed to simulate "ventricular" and "atrial" heart chambers. Inside the "ventricular" chamber, a prosthetic heart valve was placed at the inflow connection with the "atrial" chamber while another prosthetic valve was positioned at the outflow connection with flexible tubes, elastic balloons and a reservoir arranged to mimic the peripheral circulation. The flow model was filled with a 0.25% corn starch/water suspension to improve Doppler imaging. A continuous flow pump transferred the liquid from the peripheral reservoir to another one connected to the "atrial" chamber. The dimensions of the flow model were designed to permit adequate imaging by Doppler echocardiography. Acoustic windows allowed placement of transducers distal and perpendicular to the valves, so that the ultrasound beam could be positioned parallel to the valvular flow. Strain-gauge and electromagnetic transducers were used for measurements of pressure and flow in different segments of the system. The flow model was also designed to fit different sizes and types of prosthetic valves. This pulsatile flow model was able to generate pressure and flow in the physiological human range, with independent adjustment of pulse duration and rate as well as of stroke volume. This model mimics flow profiles observed in patients with regurgitant prosthetic valves.

A biolistic process for in vitro gene transfer into chicken embryos

Chicken embryos kept in culture medium were bombarded using a high helium gas pressure biolistic device. To optimize the factors that affect transformation efficiency, the lacZ gene under control of the human cytomegalovirus immediate early enhancer/promoter was used as a reporter gene. There was an inverse relationship between survival rate and transformation efficiency. The best conditions obtained for high embryo survival and high transformation efficiency were achieved with 800 psi helium gas pressure, 500 mmHg vacuum, gold particles, an 8 cm DNA-coated microparticle flying distance to the embryo and embryo placement 0.5 cm from the center of the particle dispersion cone. Under these conditions, transformation efficiency was 100%, survival rate 25% and the number of expression units in the embryo body cells ranged from 100 to 1,000. Expression of green fluorescent protein was also detected in embryos bombarded under optimal conditions. Based on the results obtained, the biolistic process can be considered an efficient method for the transformation of chicken embryos and therefore can be used as a model system to study transient gene expression and tissue-specific promoters.

Low-dose doxycycline prevents inflammatory bone resorption in rats

Matrix metalloproteinases (MMP) are considered to be key initiators of collagen degradation, thus contributing to bone resorption in inflammatory diseases. We determined whether subantimicrobial doses of doxycycline (DX) (<=10 mg kg-1 day-1), a known MMP inhibitor, could inhibit bone resorption in an experimental periodontitis model. Thirty male Wistar rats (180-200 g) were subjected to placement of a nylon thread ligature around the maxillary molars and sacrificed after 7 days. Alveolar bone loss (ABL) was measured macroscopically in one hemiarcade and the contralateral hemiarcade was processed for histopathologic analysis. Groups of six animals each were treated with DX (2.5, 5 or 10 mg kg-1 day-1, sc, 7 days) and compared to nontreated (NT) rats. NT rats displayed significant ABL, severe mononuclear cell influx and increase in osteoclast numbers, which were significantly reduced by 5 or 10 mg kg-1 day-1 DX. These data show that DX inhibits inflammatory bone resorption in a manner that is independent of its antimicrobial properties.

Nurse Competence of Graduating Nursing Students

The competence of graduating nursing students is an important issue in health care as it is related to professional standards, patient safety and the quality of nursing care. Many changes in health care lead to increased demand with respect to nurses’ competence as well the number of nurses. The purpose of this empirical study was to i) describe the nurse competence areas of nursing students in Europe, ii) evaluate the nurse competence of graduating nursing students, iii) identify factors related to the nurse competence, and to iv) assess the congruence between graduating nursing students’ self-assessments and their mentors’ assessments of students’ nurse competence. The study was carried out in two phases: descriptive phase and evaluation phase. The descriptive phase focused on describing the nurse competence areas of nursing students in Europe with the help of a literature review (n=10 empirical studies and n=4 additional documents). Thematic analysis was used as the analysis method. In the evaluation phase, the nurse competence with particular focus on nursing skills of graduating nursing students (n=154) was assessed. In addition, factors related to the nurse competence were examined. Also, the congruence between graduating nursing students’ self-assessments and their mentors’ assessments of students’ nurse competence was evaluated by comparing graduating nursing students’ self-assessments with the assessments by their mentors (n=42) in the final clinical placement in four university hospitals. Descriptive statistics and inferential statistics were used to analyse the data. Based on the results, the nurse competence of nursing students in Europe consists of nine main competence areas: (1) professional/ethical values and practice, (2) nursing skills and interventions, (3) communication and interpersonal skills, (4) knowledge and cognitive ability, (5) assessment and improving quality in nursing, (6) professional development, (7) leadership, management and teamwork, (8) teaching and supervision, and (9) research utilization. Graduating nursing students self-assessed their nurse competence as good. However, when graduating nursing students’ nurse competence was assessed by their mentors, the results were poorer. Readiness for practice based on nurse education, pedagogical atmosphere on the ward, supervisory relationship between student and mentor and being in paid work in health care at the moment of the study were the most significant factors related to the nurse competence. Conclusions: Nurse competence can be evaluated with a scale based on self-assessment, but other evaluation methods could be used alongside to ensure that nurse competence can be completed and evaluated critically. Practical implications are presented for nurse education and nursing practice. In future, longitudinal research is needed in order to understand the development of nurse competence during nurse education and the transition process from a nursing student to a professional nurse.

Superkondensaattorien suoritusarvot

Superkondensaattorit paikkaavat perinteisten kondensaattorien ja akkujen väliin jäävää teho- sekä energiasuorituskyvyn kuilua sähköenergian varastoinnissa. Tässä kandidaatin-työssä selvitetään superkondensaattorien toimintaperiaate, sähköiset ominaisuudet sekä saatavilla olevien kaupallisten tuotteiden suorituskyky.

Optimization and Measuring Techniques for Collect-and-Place Machines in Printed Circuit Board Industry

This thesis considers optimization problems arising in printed circuit board assembly. Especially, the case in which the electronic components of a single circuit board are placed using a single placement machine is studied. Although there is a large number of different placement machines, the use of collect-and-place -type gantry machines is discussed because of their flexibility and increasing popularity in the industry. Instead of solving the entire control optimization problem of a collect-andplace machine with a single application, the problem is divided into multiple subproblems because of its hard combinatorial nature. This dividing technique is called hierarchical decomposition. All the subproblems of the one PCB - one machine -context are described, classified and reviewed. The derived subproblems are then either solved with exact methods or new heuristic algorithms are developed and applied. The exact methods include, for example, a greedy algorithm and a solution based on dynamic programming. Some of the proposed heuristics contain constructive parts while others utilize local search or are based on frequency calculations. For the heuristics, it is made sure with comprehensive experimental tests that they are applicable and feasible. A number of quality functions will be proposed for evaluation and applied to the subproblems. In the experimental tests, artificially generated data from Markov-models and data from real-world PCB production are used. The thesis consists of an introduction and of five publications where the developed and used solution methods are described in their full detail. For all the problems stated in this thesis, the methods proposed are efficient enough to be used in the PCB assembly production in practice and are readily applicable in the PCB manufacturing industry.

Kerrostalon kiinteistösähkönkulutuksen kompensointi aurinkosähköjärjestelmällä

Aurinkopaneeleiden hinta on laskenut reilusti viime vuosien aikana. Hinnan laskun seurauksena aurinkosähköjärjestelmiä on asennettu paljon yksityisiin rakennuksiin sekä Suomessa että muualla maailmassa. Tässä kandidaatintyössä tutkitaan kerrostalon kiinteistösähkönkulutuksen kompensointia aurinkosähköjärjestelmällä. Kompensointia tutkitaan, koska näin saadaan taloudellisesti paras hyöty aurinkosähköjärjestelmästä. Kerrostalon kiinteistösähkönkulutuksella tarkoitetaan talon teknisten järjestelmien kuluttamaa sähköä. Järjestelmän sijoitusta tutkitaan katolle ja parvekekaiteisiin. Katolle sijoitettuna aurinkopaneelien tuotantoa tutkitaan siten, että paneelit ovat asennettu 45° ja 15° tasokulmaan. Aurinkosähköjärjestelmän investoinnin kannattavuutta tutkitaan taloyhtiön näkökulmasta.

Development and characterization of thin printed films for gas sensing applications

The monitoring and control of hydrogen sulfide (H2S) level is of great interest for a wide range of application areas including food quality control, defense and antiterrorist applications and air quality monitoring e.g. in mines. H2S is a very poisonous and flammable gas. Exposure to low concentrations of H2S can result in eye irritation, a sore throat and cough, shortness of breath, and fluid retention in the lungs. These symptoms usually disappear in a few weeks. Long-term, low-level exposure may result in fatigue, loss of appetite, headache, irritability, poor memory, and dizziness. Higher concentrations of 700 - 800 ppm tend to be fatal. H2S has a characteristic smell of rotten egg. However, because of temporary paralysis of olfactory nerves, the smelling capability at concentrations higher than 100 ppm is severely compromised. In addition, volatile H2S is one of the main products during the spoilage of poultry meat in anaerobic conditions. Currently, no commercial H2S sensor is available which can operate under anaerobic conditions and can be easily integrated in the food packaging. This thesis presents a step-wise progress in the development of printed H2S gas sensors. Efforts were made in the formulation, characterization and optimization of functional printable inks and coating pastes based on composites of a polymer and a metal salt as well as a composite of a metal salt and an organic acid. Different processing techniques including inkjet printing, flexographic printing, screen printing and spray coating were utilized in the fabrication of H2S sensors. The dispersions were characterized by measuring turbidity, surface tension, viscosity and particle size. The sensing films were characterized using X-ray photoelectron spectroscopy, X-ray diffraction, atomic force microscopy and an electrical multimeter. Thin and thick printed or coated films were developed for gas sensing applications with the aim of monitoring the H2S concentrations in real life applications. Initially, a H2S gas sensor based on a composite of polyaniline and metal salt was developed. Both aqueous and solvent-based dispersions were developed and characterized. These dispersions were then utilized in the fabrication of roll-to-roll printed H2S gas sensors. However, the humidity background, long term instability and comparatively lower detection limit made these sensors less favourable for real practical applications. To overcome these problems, copper acetate based sensors were developed for H2S gas sensing. Stable inks with excellent printability were developed by tuning the surface tension, viscosity and particle size. This enabled the formation of inkjet-printed high quality copper acetate films with excellent sensitivity towards H2S. Furthermore, these sensors showed negligible humidity effects and improved selectivity, response time, lower limit of detection and coefficient of variation. The lower limit of detection of copper acetate based sensors was further improved to sub-ppm level by incorporation of catalytic gold nano-particles and subsequent plasma treatment of the sensing film. These sensors were further integrated in an inexpensive wirelessly readable RLC-circuit (where R is resistor, L is inductor and C is capacitor). The performance of these sensors towards biogenic H2S produced during the spoilage of poultry meat in the modified atmosphere package was also demonstrated in this thesis. This serves as a proof of concept that these sensors can be utilized in real life applications.

Map matching by using inertial sensors: literature review

This literature review aims to clarify what is known about map matching by using inertial sensors and what are the requirements for map matching, inertial sensors, placement and possible complementary position technology. The target is to develop a wearable location system that can position itself within a complex construction environment automatically with the aid of an accurate building model. The wearable location system should work on a tablet computer which is running an augmented reality (AR) solution and is capable of track and visualize 3D-CAD models in real environment. The wearable location system is needed to support the system in initialization of the accurate camera pose calculation and automatically finding the right location in the 3D-CAD model. One type of sensor which does seem applicable to people tracking is inertial measurement unit (IMU). The IMU sensors in aerospace applications, based on laser based gyroscopes, are big but provide a very accurate position estimation with a limited drift. Small and light units such as those based on Micro-Electro-Mechanical (MEMS) sensors are becoming very popular, but they have a significant bias and therefore suffer from large drifts and require method for calibration like map matching. The system requires very little fixed infrastructure, the monetary cost is proportional to the number of users, rather than to the coverage area as is the case for traditional absolute indoor location systems.

Purple urine bag syndrome in end-stage chronic kidney disease

Introduction: When faced with violet, purple or purplish-blue urine, clinicians should consider urinary tract infection in their differential diagnosis. Case report: A 60-year-old woman with end-stage kidney disease and non-adherence to renal replacement therapy was admitted to our hospital for placement of hemodialysis catheter. During her hospitalization she had purple urine, and purple urine bag syndrome (PUBS) was diagnosed. She was effectively treated with antibiotics and her urine returned to a dark yellow color. Discussion: Although this condition is often easily treated, diagnosing PUBS in chronic renal patients probably means an increased serum concentration of indoxyl sulfate, metabolite that is involved in the progression of both CKD and cardiovascular disease. Conclusion: Hence, in the context of our renal patients, perhaps PUBS is not as benign as supposed.

Urana työllistyminen

Tutkimuksen tarkoituksena on ollut selvittää pitkään työttömänä olleiden ammatinvaihtajien ammatinvaihdon ja työllistymisen etenemistä. Tämän lisäksi tutkimuksessa on tarkasteltu kohderyhmän mielikuvaa ohjaavasta koulutuksesta. Pitkittäistutkimus on toteutettu seurannalla, jonka välietappina on ollut kohderyhmän osallistuminen ohjaavaan koulutukseen. Työvoimapoliittinen ohjaava koulutus edusti erityisesti vaikeasti työllistettäville kohdistettavaa interventiota, jolla pyrittiin puuttumaan työttömyyskierteeseen ja ehkäisemään syrjäytymiskehityksen jatkuminen. Tutkimuksen kohderyhmäksi valitut ihmiset (51) ovat suoranaisessa keskiössä tutkittaessa työelämästä syrjäytymistä. Heikentyneet työelämävalmiudet ja työmarkkinakelpoisuus ovat tehneet heistä vaikeasti työllistettäviä. Heidän valintansa kohderyhmäksi, työhallinnon tekemän kurssiosoituksen kriteereinä olevien pitkäaikaistyöttömyyden sekä epäonnistuneen ammatinvaihdon perusteella, osoittaa heidän olevan erityisen ohjauksen ja tuen tarpeessa. On kuitenkin huomattava, että heidät on valittu kohderyhmäksi paitsi kurssiosoituksen saaneina pitkäaikaistyöttöminä myös ammatinvaihtajina, jotka itse haluavat vaihtaa ammattiaan. Tutkimusaineistona ovat olleet työhallinnon asiakasrekisteritiedot ja seurantatutkimuksen perusteella muodostetuista ryhmistä valittujen neljän tapaushenkilön teemahaastatteluaineistot. Tutkimusaineistoa on käsitelty laadullisesti, koska tutkimus kuuluu laadullisen tutkimuksen piiriin sekä tutkimuksen kohteena olevan ilmiön, tutkimuskysymysten ja -aineistojen että tarkoituksensa perusteella. Tutkimuksessa on kuvattu pitkäaikaistyöttömien henkilöiden ammatinvaihtoa ja työllistymistä. Kuvatuissa tapauksissa ammatinvaihtotarve perustuu suurimmalla osalla terveydellisiin rajoitteisiin, joiden vuoksi aikaisemmassa työssä toimiminen on mahdotonta. Useimmiten vajaakuntoisuus on merkittävästi pitkittänyt heidän työttömyyttään. Tämän vuoksi seurantatutkimuksessa on keskitytty tarkastelemaan ammatinvaihtoprosessin etenemistä. Muun muassa työttömyyttä laajasti tutkineet Aho ja Vähätalo ovat todenneet vajaakuntoisuuden olevan merkittävä työttömyyden pitkittymiseen vaikuttava tekijä. Ahon mukaan vajaakuntoisiksi diagnosoituja on jopa viidennes kroonisesti pitkäaikaistyöttömistä työhallinnon asiakasrekisteriin kirjatuista henkilöistä. Monen tekijän summana pitkään työttömänä olleet henkilöt ovat vaarassa ajautua tilanteeseen, jossa he eivät enää kykene omin avuin löytämään ulospääsyä työttömyydestä Tämän seurantatutkimuksen perusteella vain hyvin harvalla kohderyhmään kuuluvista on ammatinvaihdossa ja työllistymisessä tapahtunut merkittävää edistymistä huolimatta useiden vuosien yrittämisestä. Ammatinvaihdon ja työllistymisen edistymistä on tarkasteltu sen perusteella, miten työelämään ja/tai koulutukseen sijoittumiset tai muut toiminnot ovat edesauttaneet tavoitteen toteutumista. Seurantatutkimuksessa on muodostettu neljä tyyppiryhmää ammatinvaihdon ja työllistymisen etenemisen perusteella. Ryhmät ovat: Ammatinvaihdossa onnistuneet (5), ammatinvaihdossa edistyneet (19), pitkäaikaistyöttömäksi jääneet (12) ja epätarkoituksenmukaisesti sijoittuneet (15). Ammatinvaihdossa onnistuneet ovat toteuttaneet ammatinvaihtonsa siirtymällä suoraan työelämään uudelle alalle, työllistymällä koulutusta vastaavaan työhön uudelleenkoulutuksen jälkeen tai kouluttautumalla uuteen ammattiin työllistymättä. Kuitenkin vain kolme heistä on sijoittunut seurannan päättyessä pysyväisluonteiseen terveydelleen soveltuvaan työhön muiden ollessa edelleen työttömänä. Ammatinvaihdossa edistyneet ovat suurimmaksi osaksi edistyneet ammatinvaihdossaan soveltuvien tukitöiden avulla. Työttömyys on kuitenkin jatkunut valtaosalla ja vain yksi heistä on sijoittuneena työelämään seurannan päättyessä. Tämä sijoittuminen ei ole kuitenkaan edistänyt ammatinvaihtoa. Pitkäaikaistyöttömäksi jääneet ovat olleet yhtäjaksoisesti työttömänä kokoseurantajakson ajan. Epätarkoituksenmukaisesti sijoittuneet ovat enimmäkseen sijoittuneet terveytensä kannalta haitallisiin ja/tai ammatinvaihtosuunnitelmilleen soveltumattomiin sijoitustöihin ja määräaikaisuuksiin. Seurannan päättyessä heovat joko työttömänä tai toimivat ammatinvaihtotavoitteensa kannalta haitallisissa työtehtävissä. Tämä on vahvistanut mielikuvaa, joka usealle heille on muodostunut ohjaavasta koulutuksesta työttömille suunnattuna sanktiona, joka ei edistä työllistymistä. Ohjaavassa koulutuksessa suurin osa heistä on kokenut hyötyneensä työharjoittelujaksosta, joka on antanut käyttökelpoista tietoa ammatinvalintaa varten. Lukuun ottamatta kolmea henkilöä, jotka ovat seurannan päättyessä pysyväisluonteisessa työssä terveydelleen soveltuvassa ammatissa, ovat kaikki muut kohderyhmään kuuluvat edelleen erityisen ohjauksen ja tuen tarpeessa johtuen ammatinvaihdon keskeneräisyydestä ja/tai työttömyyden jatkumisesta. Yhdistävänä tekijänä ammatinvaihdossa onnistuneilla vaikuttaa olleen tulevaisuususkon säilyminen pitkäaikaistyöttömyydessä. Sekä ammatinvaihdossa onnistuneet että edistyneet ovat kokeneet työttömyyteen katkoksia tuoneet työt merkityksellisinä riippumatta siitä, ovatko työtehtävät edistäneet ammatinvaihtoa.

Investigation of single tryptophan proteins encapsulated in TEOS-derived sol-gel matrices by fluorescence spectroscopy /

In the work reported here, optically clear, ultrathin TEOS derived sol-gel slides which were suitable for studies of tryptophan (Trp) fluorescence from entrapped proteins were prepared by the sol-gel technique and characterized. The monitoring of intrinsic protein fluorescence provided information about the structure and environment of the entrapped protein, and about the kinetics of the interaction between the entrapped protein and extemal reagents. Initial studies concentrated on the single Trp protein monellin which was entrapped into the sol-gel matrices. Two types of sol-gel slides, termed "wet aged", in which the gels were aged in buffer and "dry-aged", in which the gels were aged in air , were studied in order to compare the effect of the sol-gel matrix on the structure of the protein at different aging stages. Fluorescence results suggested that the mobility of solvent inside the slides was substantially reduced. The interaction of the entrapped protein with both neutral and charged species was examined and indicated response times on the order of minutes. In the case of the neutral species the kinetics were diffusion limited in solution, but were best described by a sum of first order rate constants when the reactions occurred in the glass matrix. For charged species, interactions between the analytes and the negatively charged glass matrix caused the reaction kinetics to become complex, with the overall reaction rate depending on both the type of aging and the charge on the analyte. The stability and conformational flexibility of the entrapped monellin were also studied. These studies indicated that the encapsulation of monellin into dry-aged monoliths caused the thermal unfolding transition to broaden and shift upward by 14°C, and causedthe long-term stability to improve by 12-fold (compared to solution). Chemical stability studies also showed a broader transition for the unfolding of the protein in dry-aged monoliths, and suggested that the protein was present in a distribution of environments. Results indicated that the entrapped proteins had a smaller range of conformational motions compared to proteins in solution, and that entrapped proteins were not able to unfold completely. The restriction of conformational motion, along with the increased structural order of the internal environment of the gels, likely resulted in the improvements in themial and long-term stability that were observed. A second protein which was also studied in this work is the metal binding protein rat oncomodulin. Initially, the unfolding behavior of this protein in aqueous solution was examined. Several single tryptophan mutants of the metal-binding protein rat oncomodulin (OM) were examined; F102W, Y57W, Y65W and the engineered protein CDOM33 which had all 12 residues of the CD loop replaced with a higher affinity binding loop. Both the thermal and the chemical stability were improved upon binding of metal ions with the order apo < Ca^^ < Tb^"^. During thermal denaturation, the transition midpoints (Tun) of Y65W appeared to be the lowest, followed by Y57W and F102W. The placement of the Trp residue in the F-helix in F102W apparently made the protein slightly more thermostable, although the fluorescence response was readily affected by chemical denaturants, which probably acted through the disruption of hydrogen bonds at the Cterminal end of the F-helix. Under both thermal and chemical denaturation, the engineered protein showed the highest stability. This indicated that increasing the number of metal ligating oxygens in the binding site, either by using a metal ion with a higher coordinatenumber (i.e. Tb^*) which binds more carboxylate ligands, or by providing more ligating groups, as in the CDOM33 replacement, produces notable improvements in protein stability. Y57W and CE)OM33 OM were chosen for further studies when encapsulated into sol-gel derived matrices. The kinetics of interaction of terbium with the entrapped proteins, the ability of the entrapped protein to binding terbium, as well as thermal stability of these two entrapped protein were compared with different levels of Ca^"*^ present in the matrix and in solution. Results suggested that for both of the proteins, the response time and the ability to bind terbium could be adjusted by adding excess calcium to the matrix before gelation. However, the less stable protein Y57W only retained at most 45% of its binding ability in solution while the more stable protein CDOM33 was able to retain 100% binding ability. Themially induced denaturation also suggested that CDOM33 showed similar stability to the protein in solution while Y57W was destabilized. All these results suggested that "hard" proteins (i.e. very stable) can easily survive the sol-gel encapsulation process, but "soft" proteins with lower thermodynamic stability may not be able to withstand the sol-gel process. However, it is possible to control many parameters in order to successfully entrap biological molecules into the sol-gel matrices with maxunum retention of activity.