Additions to the General anatomy of Xavier Bichat /

Mode of access: Internet.

Grounds and buildings of the Centennial Exhibition, Philadelphia, 1876 /

Binding: brown goatskin, tooled in blind and with seal of the United States Centennial Commission in gilt centered on each board. Edges of boards and turn-ins tooled in gilt. Page edges gilt.

Availability of occupational health services for federal employees in GSA buildings-1985 : a chart book /

Item 532-E-10.

Americans with Disabilities Act (ADA) : accessibility guidelines for buildings and facilities, transportation facilities, transportation vehicles /

"August 1992."

Architectural supervision of modern buildings.

Mode of access: Internet.

Rules and Regulations Relating to the Safety of Design and Construction of Public School Buildings

Mode of access: Internet.

Homœopathic treatment for sick soldiers : proposed hospital buildings in France.

Open letter addressed: "To the friends of homœopathy in Great Britain" and signed by George Wyatt Truscott, Bart. and 11 other names, and David MacNish, Secretary to the Provisional Committee.

A general dictionary of painters; containing memoirs of the lives and works of the most eminent professors of the art of painting, from its revival, by Cimabue, in the year 1250, to the present time. A new edition, revised and corrected throughout, with numerous additions, particularly of the most distinguished artists of the British school.

Mode of access: Internet.

Biographical and critical essays. Reprinted from reviews, with additions and corrections,

Mode of access: Internet.

Concrete for industrial buildings and garages.

Mode of access: Internet.

Return of outdoor memorials in London : Other than statues on the exterior of buildings, memorials in the nature of tombstones, memorial buildings and memorial trees /

Clerk of the Council is G.L. Gomme.

Sintering of freeformed maraging steel with boron additions

This paper describes the sintering of an 18Ni(350) maraging steel with additions of boron, with the aim of producing high hardness rapid tooling. Reaction of the boron with the alloying elements in the maraging steel resulted in the formation of a Mo- and Ti-rich borides. The former melted at similar to1220degreesC, providing a liquid phase for enhanced sintering. Although densification could occur regardless of the boron content, especially at high temperature, 0.4% B was required to produce a near full density component. The formation of the various borides depleted the matrix of critical age hardening elements. However, by altering the starting powder composition to compensate for this, hardness close to the wrought alloy has been achieved. This hardness was comparable to a common die casting tool steel. Examples of dies produced using selective laser sintering (SLS) are also shown. (C) 2003 Elsevier B.V. All rights reserved.

Effect of Si additions and heat treatment on the mechanical behaviour of an Al-5Mg casting alloy

Adding 1%Si to binary Al-5Mg alloy slightly increases the yield stress in comparison with the Si free alloy but dramatically reduces the ductility and tensile strength due to the formation of brittle eutectic Mg2Si and pi-Al8FeMg3Si6 particles. Adding 3%Si slightly reduces the yield stress, presumably due to some of the Mg being tied up in the Mg2Si, and further reduces the ductility due to the increased volume fraction of intermetallics. Solution heat treatment at 436degreesC decreases the yield stress of both Si containing alloys, and slightly increases the ductility in the alloy with 3%Si. Subsequent ageing at 180degreesC has no further effects on the strength or ductility. The loss in strength of the heat treated alloys seems to be due to overageing Of Mg2Si precipitates dispersed in the bulk of the alloy. (C) 2004 W. S. Maney Son Ltd.

Combining Sr and Na additions in hypoeutectic Al-Si foundry alloys

From recent published data, it is still unclear whether combining additions of Na and Sr have synergistic effects or deleterious interactions, This paper clarifies the interactions between these two modifiers and investigates the effects of such interactions on alloy solidification and castability. It was found that combined additions of Sr and Na do not appear to cause improvement of the modification of the eutectic microstructure even after only a short period after addition. Na addition may promote Sr vaporization and/or oxidation kinetically. leading to a quicker loss of both modifiers, which is blamed for the rapid loss of the modification effect during melt holding. Quenching trials during the eutectic arrest indicate that addition of Sr into Na-modified melts does not alter the eutectic solidification behaviour The effect of Na on eutectic solidification dominates, and the eutectic is observed to evolve with a significant dependency on the thermal gradient, Combining Sr and Na additions produced no beneficial effects on porosity and casting defects. (c) 2005 Elsevier B.V. All rights reserved.