Issues in socially desirable responding and personality research

The four studies presented in this dissertation were designed to examine the influence of socially desirable responding (SDR) on personality research outcomes. The assessment of personality relies heavily on the use of self-report questionnaires. Their validity could be threatened by people being dishonest in their self-descriptions and ascribing more desirable traits to themselves than would be warranted by their behaviour. Scales designed to detect SDR have been around for half a century, but their status continues to be debated. Paulhus (1991) Balanced Inventory of Desirable Responding (BIDR) is perhaps the most prominent of the scales developed to distinguish between those individuals who have distorted their responses and those who have not. The first two studies included in this dissertation mostly deal with the properties of the BIDR. The other two studies are less focused on SDR scales and investigate, more generally, the potential effects of SDR on two phenomena that are of central interest to the general personality discourse personality stability over time and volunteering as participants in psychological research. The data of Studies I and II showed that Paulhus BIDR scales, designed to be indicators of SDR, are not pure measures both the communion management and self-deceptive enhancement scales are, at once, measures of response bias and measures of more substantive individual differences in behaviour. The data further suggested that the communion management and self-deceptive enhancement scales of the BIDR are somewhat accurate measures of communal and agentic bias, respectively. No evidence for a suppressor model of SDR, and only weak evidence for a moderator model, was found in those studies. Concerning research on personality stability, some data in Study I suggested that SDR may add reliable and common variance to a personality questionnaire administered at two different points in time, thus artificially inflating the test-retest correlation of that questionnaire. Furthermore, Study III demonstrated that the maturity-stability hypothesis may be in part, but not entirely, a product of SDR. Study IV suggested that some of the observed personality differences between research volunteers and nonvolunteers may be due to heightened SDR of volunteers. However, those personality differences were by no means exclusively attributable to differences in SDR. In sum, the work presented in this thesis reveals some ambiguity regarding the effects of SDR on personality research, as is true of much of the previous research on SDR. Clear-cut conclusions are difficult to reach, as the data were neither fully consistent with the view that SDR can be ignored, nor with the view that SDR needs to be controlled in some way. The struggle to understand the influence of SDR on personality research continues.

A Comparison of the Implementation of the Employment Provisions of the Americans with Disabilities Act of 1990 (ADA) in the United States and the Disability Discrimination Act (DDA) 1995 in the United Kingdom

This summarizes the results of recently conducted surveys in the United States and Britain to assess employer response in each of these countries to their respective employment disability nondiscrimination legislation.

Disability in a Technology-Driven Workplace

New Internet and Web-based technology applications have meant significant cost and time efficiencies to many American businesses. However, many employers have not yet fully grasped the impact of these new information and communication technologies on applicants and employees with certain disabilities such as vision impairments, hearing problems or limited dexterity. Although not all applicants and employees who have a disability may experience IT-access problems, to select groups it can pose a needless barrier. The increasing dominance of IT in the workplace presents both a challenge and an opportunity for workers with disabilities and their employers. It will be up to HR professionals to ensure that Web-based HR processes and workplace technologies are accessible to their employees with disabilities. .

Weak rectifying behaviour of p-SnS/n-ITO heterojunctions

This work explores the electrical properties of p-SnS/n-ITO heterojunction at different temperatures. The p-type SnS film was deposited on n-type ITO substrate using the thermal evaporation technique and its junction properties were studied using two probe method. The as-grown p-n junction exhibited weak rectifying behaviour with a low Saturation current of the order of similar to 10(-6) A. While increasing temperature, the saturation current of the junction is increased and however, its series resistance decreased. At all temperatures the junction exhibited three types of transport mechanisms depending on applied bias-voltage. At lower voltages the junction showed nearly ideal diode characteristics. The junction behaviour with respect to bias-voltage and temperature is discussed with the help of existing theories and energy band diagram.

Development of near infrared analysis of faeces to estimate non-grass proportions in diets selected by cattle grazing tropical pastures

Grass (monocots) and non-grass (dicots) proportions in ruminant diets are important nutritionally because the non-grasses are usually higher in nutritive value, particularly protein, than the grasses, especially in tropical pastures. For ruminants grazing tropical pastures where the grasses are C-4 species and most non-grasses are C-3 species, the ratio of C-13/C-12 in diet and faeces, measured as delta C-13 parts per thousand, is proportional to dietary non-grass%. This paper describes the development of a faecal near infrared (NIR) spectroscopy calibration equation for predicting faecal delta C-13 from which dietary grass and non-grass proportions can be calculated. Calibration development used cattle faeces derived from diets containing only C-3 non-grass and C-4 grass components, and a series of expansion and validation steps was employed to develop robustness and predictive reliability. The final calibration equation contained 1637 samples and faecal delta C-13 range (parts per thousand) of [12.27]-[27.65]. Calibration statistics were: standard error of calibration (SEC) of 0.78, standard error of cross-validation (SECV) of 0.80, standard deviation (SD) of reference values of 3.11 and R-2 of 0.94. Validation statistics for the final calibration equation applied to 60 samples were: standard error of prediction (SEP) of 0.87, bias of -0.15, R-2 of 0.92 and RPD of 3.16. The calibration equation was also tested on faeces from diets containing C-4 non-grass species or temperate C-3 grass species. Faecal delta C-13 predictions indicated that the spectral basis of the calibration was not related to C-13/C-12 ratios per se but to consistent differences between grasses and non-grasses in chemical composition and that the differences were modified by photosynthetic pathway. Thus, although the calibration equation could not be used to make valid faecal delta C-13 predictions when the diet contained either C-3 grass or C-4 non-grass, it could be used to make useful estimates of dietary non-grass proportions. It could also be ut :sed to make useful estimates of non-grass in mixed C-3 grass/non-grass diets by applying a modified formula to calculate non-grass from predicted faecal delta C-13. The development of a robust faecal-NIR calibration equation for estimating non-grass proportions in the diets of grazing cattle demonstrated a novel and useful application of NIR spectroscopy in agriculture.

Is night-time wind direction important to best practice wild dog trapping and baiting?

We discovered a significant bias for wild dog scent station spoor (scats and scratches) to be positioned on the north-easterly side of roads and intersections. Counts of this spoor, 50 metres in each direction of north-south and east-west intersections were made in state forests near Roma in southwest Queensland, Cecil Plains on the Darling Downs and Maryborough on the coast during mating season in April/May 2007. While 51% of 190 and 83% of 120 scent station spoor were located on the north-eastern sector of the intersections at Cecil Plains and Roma respectively, spoor were more evenly distributed across all four sectors at Maryborough (n=47).

Enhancement of Tunneling Density of States at a Junction of Three Luttinger Liquid Wires

We study the tunneling density of states (TDOS) for a junction of three Tomonaga-Luttinger liquid wires. We show that there are fixed points which allow for the enhancement of the TDOS, which is unusual for Luttinger liquids. The distance from the junction over which this enhancement occurs is of the order of x=v/(2 omega), where v is the plasmon velocity and omega is the bias frequency. Beyond this distance, the TDOS crosses over to the standard bulk value independent of the fixed point describing the junction. This finite range of distances opens up the possibility of experimentally probing the enhancement in each wire individually.

Women's progression to leadership: A project-based organisational perspective

This is a qualitative study of female underrepresentation in leadership roles in project-based organisations in Australia, specifically the construction and property development industries. Using a gender lens, the underlying structural and cultural barriers to women's advancement to leadership in those organisations was studied and, in particular, what challenges they face in their career advancement and what attempts they make to resolve those challenges. The findings show that the unique characteristics of project-based organisations, with their perpetual masculine work practices, embedded masculine logic, gender-based bias and masculine organisational culture, all maintain the pattern of underrepresentation of women.

Social Audit Regulation Within the NGO Sector: Practices of NGOs Operating in Bangladesh and Indonesia

Social audit is one of those important mechanisms for strengthening NGOs’ accountability to poor communities (as NGOs’ key beneficiaries). However, conducting social audits within the NGO sector often rests on the individual interests and priorities of donors or NGOs themselves, effectively resulting in self-selection bias, and limiting the effectiveness and usefulness of social audits as a control and evaluation mechanism. The purpose of this chapter is to identify the prevalence, scale, and scope of social audits within the NGO sector, particularly NGOs engaging in microenterprise development programs. Accordingly, this study examined 20 NGOs operating in two countries - Bangladesh and Indonesia. Data were collected from publicly available sources and in-depth interviews with senior executives of the participating NGOs. Further, 10 interviews were conducted with a small sample of beneficiaries (individuals or groups from four of the participating NGOs) in order to gain an understanding of beneficiaries’ perceptions of the NGOs’ social audit mechanism. The findings reveal a range of approaches to social audit among NGOs, as well as the usefulness and limitations of this mechanism for strengthening NGO accountability, particularly to beneficiaries. Findings highlight that within the NGOs investigated the conduct of social audits remained voluntary and was strongly dependant on donors’ requirements. As social audit regulation within the NGO sector is minimal, the findings provide regulators with valuable guidance for better understanding the value of social audit as a mechanism to strengthen accountability of the NGO sector, particularly accountability to beneficiaries.

Improving the estimation of probability of bidder participation in procurement auctions

Anticipating the number and identity of bidders has significant influence in many theoretical results of the auction itself and bidders’ bidding behaviour. This is because when a bidder knows in advance which specific bidders are likely competitors, this knowledge gives a company a head start when setting the bid price. However, despite these competitive implications, most previous studies have focused almost entirely on forecasting the number of bidders and only a few authors have dealt with the identity dimension qualitatively. Using a case study with immediate real-life applications, this paper develops a method for estimating every potential bidder’s probability of participating in a future auction as a function of the tender economic size removing the bias caused by the contract size opportunities distribution. This way, a bidder or auctioner will be able to estimate the likelihood of a specific group of key, previously identified bidders in a future tender.

Studies of the genetic epidemiology of cardiovascular disease: focus on inflammatory candidate genes

Cardiovascular disease (CVD) is a complex disease with multifactorial aetiology. Both genetic and environmental factors contribute to the disease risk. The lifetime risk for CVD differs markedly between men and women, men being at increased risk. Inflammatory reaction contributes to the development of the disease by promoting atherosclerosis in artery walls. In the first part of this thesis, we identified several inflammatory related CVD risk factors associating with the amount of DNA from whole blood samples, indicating a potential source of bias if a genetic study selects the participants based on the available amount of DNA. In the following studies, this observation was taken into account by applying whole genome amplification to samples otherwise subjected to exclusion due to very low DNA yield. We continued by investigating the contribution of inflammatory genes to the risk for CVD separately in men and women, and looked for sex-genotype interaction. In the second part, we explored a new candidate gene and its role in the risk for CVD. Selenoprotein S (SEPS1) is a membrane protein residing in the endoplasmic reticulum where it participates in retro-translocation of unfolded proteins to cytosolic protein degradation. Previous studies have indicated that SEPS1 protects cells from oxidative stress and that variations in the gene are associated with circulating levels of inflammatory cytokines. In our study, we identified two variants in the SEPS1 gene, which associated with coronary heart disease and ischemic stroke in women. This is, to our knowledge, the first study suggesting a role of SEPS1 in the risk for CVD after extensively examining the variation within the gene region. In the third part of this thesis, we focused on a set of seven genes (angiotensin converting enzyme, angiotensin II receptor type I, C-reactive protein (CRP), and fibrinogen alpha-, beta-, and gamma-chains (FGA, FGB, FGG)) related to inflammatory cytokine interleukin 6 (IL6) and their association with the risk for CVD. We identified one variant in the IL6 gene conferring risk for CVD in men and a variant pair from IL6 and FGA genes associated with decreased risk. Moreover, we identified and confirmed an association between a rare variant in the CRP gene and lower CRP levels, and found two variants in the FGA and FGG genes associating with fibrinogen. The results from this third study suggest a role for the interleukin 6 pathway genes in the pathogenesis of CVD and warrant further studies in other populations. In addition to the IL6 -related genes, we describe in this thesis several sex-specific associations in other genes included in this study. The majority of the findings were evident only in women encouraging other studies of cardiovascular disease to include and analyse women separately from men.

The structure of Norway spruce (Picea abies [L.] Karst.) stems in relation to wood properties of sawn timber

An important challenge in forest industry is to get the appropriate raw material out from the forests to the wood processing industry. Growth and stem reconstruction simulators are therefore increasingly integrated in industrial conversion simulators, for linking the properties of wooden products to the three-dimensional structure of stems and their growing conditions. Static simulators predict the wood properties from stem dimensions at the end of a growth simulation period, whereas in dynamic approaches, the structural components, e.g. branches, are incremented along with the growth processes. The dynamic approach can be applied to stem reconstruction by predicting the three-dimensional stem structure from external tree variables (i.e. age, height) as a result of growth to the current state. In this study, a dynamic growth simulator, PipeQual, and a stem reconstruction simulator, RetroSTEM, are adapted to Norway spruce (Picea abies [L.] Karst.) to predict the three-dimensional structure of stems (tapers, branchiness, wood basic density) over time such that both simulators can be integrated in a sawing simulator. The parameterisation of the PipeQual and RetroSTEM simulators for Norway spruce relied on the theoretically based description of tree structure developing in the growth process and following certain conservative structural regularities while allowing for plasticity in the crown development. The crown expressed both regularity and plasticity in its development, as the vertical foliage density peaked regularly at about 5 m from the stem apex, varying below that with tree age and dominance position (Study I). Conservative stem structure was characterized in terms of (1) the pipe ratios between foliage mass and branch and stem cross-sectional areas at crown base, (2) the allometric relationship between foliage mass and crown length, (3) mean branch length relative to crown length and (4) form coefficients in branches and stem (Study II). The pipe ratio between branch and stem cross-sectional area at crown base, and mean branch length relative to the crown length may differ in trees before and after canopy closure, but the variation should be further analysed in stands of different ages and densities with varying site fertilities and climates. The predictions of the PipeQual and RetroSTEM simulators were evaluated by comparing the simulated values to measured ones (Study III, IV). Both simulators predicted stem taper and branch diameter at the individual tree level with a small bias. RetroSTEM predictions of wood density were accurate. For focusing on even more accurate predictions of stem diameters and branchiness along the stem, both simulators should be further improved by revising the following aspects in the simulators: the relationship between foliage and stem sapwood area in the upper stem, the error source in branch sizes, the crown base development and the height growth models in RetroSTEM. In Study V, the RetroSTEM simulator was integrated in the InnoSIM sawing simulator, and according to the pilot simulations, this turned out to be an efficient tool for readily producing stand scale information about stem sizes and structure when approximating the available assortments of wood products.

Effect of organic gate dielectric material properties on interfacial charging and discharging of pentacene MIM device

The effect of material properties of an environmentally friendly, optically transparent dielectric material, polyterpenol, on the carrier transients within the pentacene-based double-layer MTM device was investigated. Polyterpenol films were RF plasma polymerised under varied process conditions, with resultant films differing in surface chemistry and morphology. Independent of type of polyterpenol, time-resolved EFISHG study of IZO/polyterpenol/pentacene/Au structures showed similar transient behaviour with carriers injected into pentacene from Au electrode only, confirming polyterpenol to be a suitable blocking layer for visualisation of single-species carrier transportation during charging and discharging under different bias conditions. Polyterpenol fabricated under higher input power show better promise due to higher chemical and thermal stability, improved uniformity, and absence of defects.

Investigation of interfacial charging and discharging in double-layer pentacene-based metal-insulator-metal device with polyterpenol blocking layer using electric field induced second harmonic generation

Time-resolved electric field induced second harmonic generation technique was used to probe the carrier transients within double-layer pentacene-based MIM devices. Polyterpenol thin films fabricated from non-synthetic environmentally sustainable source were used as a blocking layer to assist in visualisation of single-species carrier transportation during charging and discharging under different bias conditions. Results demonstrated that carrier transients were comprised of charging on electrodes, followed by carrier injection and charging of the interface. Polyterpenol was demonstrated to be a sound blocking material and can therefore be effectively used for probing of double-layer devices using EFISHG.