A study of the aerodynamic characteristics of captor hoods in local exhaust ventilation systems

The research objectives were:- 1.To review the literature to establish the factors which have traditionally been regarded as most crucial to the design of effectlve exhaust ventilation systems. 2. To design, construct, install and calibrate a wind tunnel. 3. To develop procedures for air velocity measurement followed by a comprehensive programme of aerodvnamic data collection and data analysis for a variety of conditions. The major research findings were:- a) The literature in the subject is inadequate. There is a particular need for a much greater understanding of the aerodynamics of the suction flow field. b) The discrepancies between the experimentally observed centre-line velocities and those predicted by conventional formulae are unacceptably large. c) There was little agreement between theoretically calculated and observed velocities in the suction zone of captor hoods. d) Improved empirical formulae for the prediction of centre-line velocity applicable to the classical geometrically shaped suction openings and the flanged condition could be (and were) derived. Further analysis of data revealed that: - i) Point velocity is directly proportional to the suction. flow rate and the ratio of the point velocity to the average face velocity is constant. ii) Both shape, and size of the suction opening are significant factors as the coordinates of their points govern the extent of the effect of the suction flow field. iii) The hypothetical ellipsoidal potential function and hyperbolic streamlines were found experimentally to be correct. iv) The effect of guide plates depends on the size, shape and the angle of fitting. The effect was to very approximately double the suction velocity but the exact effect is difficult to predict. v) The axially symmetric openings produce practically symmetric flow fields. Similarity of connection pieces between the suction opening and the main duct in each case is essential in order to induce a similar suction flow field. Additionally a pilot study was made in which an artificial extraneous air flow was created, measured and its interaction with the suction flow field measured and represented graphically.

An investigation of the relationship between temperature, forces and tool wear in turning and drilling

Developing a means of predicting tool life has been and continues to be a focus of much research effort. A common experience in attempting to replicate such efforts is an inability to achieve the levels of agreement between theory and practice of the original researcher or to extrapolate the work to different materials or cutting conditions to those originally used. This thesis sets out to examine why most equations or models when replicated do not give good agreements. One reason which was found is that researchers in wear prediction, their predictions are limited because they generally fail to properly identify the nature of wear mechanisms operative in their study. Also they fail to identify or recognise factors having a significant influence on wear such as bar diameter. Also in this research the similarities and differences between the two processes of single point turning and drilling are examined through a series of tests. A literature survey was undertaken in wear and wear prediction. As a result it was found that there was a paucity in information and research in the work of drilling as compared to the turning operation. This was extended to the lack of standards that exist for the drilling operation. One reason for this scarcity in information on drilling is due to the complexity of the drilling and the tool geometry of the drill. In the comparative drilling and turning tests performed in this work, the same tool material; HSS, and similar work material was used in order to eliminate the differences which may occur due to this factor. Results of the tests were evaluated and compared for the two operations and SEM photographs were taken for the chips produced. Specific test results were obtained for the cutting temperatures and forces of the tool. It was found that cutting temperature is influenced by various factors like tool geometry and cutting speed, and the temperature itself influenced the tool wear and wear mechanisms that act on the tool. It was found and proven that bar diameter influences the temperature, a factor not considered previously.

Gold nanoparticles decorated with oligo(ethylene glycol) thiols:kinetics of colloid aggregation driven by depletion forces

We have studied the kinetics of the phase-separation process of mixtures of colloid and protein in solutions by real-time UV-vis spectroscopy. Complementary small-angle X-ray scattering (SAXS) was employed to determine the structures involved. The colloids used are gold nanoparticles functionalized with protein resistant oligo(ethylene glycol) (OEG) thiol, HS(CH(2))(11)(OCH(2)CH(2))(6)OMe (EG6OMe). After mixing with protein solution above a critical concentration, c*, SAXS measurements show that a scattering maximum appears after a short induction time at q = 0.0322 angstrom(-1) stop, which increases its intensity with time but the peak position does not change with time, protein concentration and salt addition. The peak corresponds to the distance of the nearest neighbor in the aggregates. The upturn of scattering intensities in the low q-range developed with time indicating the formation of aggregates. No Bragg peaks corresponding to the formation of colloidal crystallites could be observed before the clusters dropped out from the solution. The growth kinetics of aggregates is followed in detail by real-time UV-vis spectroscopy, using the flocculation parameter defined as the integral of the absorption in the range of 600-800 nm wavelengths. At low salt addition (<0.5 M), a kinetic crossover from reaction-limited cluster aggregation (RLCA) to diffusion-limited cluster aggregation (DLCA) growth model is observed, and interpreted as being due to the effective repulsive interaction barrier between colloids within the depletion potential. Above 0.5 M NaCl, the surface charge of proteins is screened significantly, and the repulsive potential barrier disappeared, thus the growth kinetics can be described by a DLCA model only.

The influence of external forces on a monopolistic market:a statistical physics perspective

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Prediction equations for cutting forces while oblique machining EN-8 steels employing 'response surface methodology'

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Strategists' reactions and resistance towards forces of inclusion:soothing the anxiety of marketing (non-) influence

The firm is becoming more and more inclusive in its conception. And yet, marketing studies point to the same overwhelming conclusion that marketing, marketing departments and marketers are being increasingly 'pushed out' - excluded. We argue that where and when inclusion-exclusion intersect in the practice of strategic marketing is important, not least because their powerful boundary-setting and spanning roles have a determinant effect on the places and spaces, within which marketing strategists are (counter-) mobilized. This paper provides new insights relating to the contradictory forces existing around inclusion-exclusion in corporate strategizing. A further aim is to present the position of marketing (non-) influence within this context. The paper provides a unique theoretical contribution by illustrating some of the contradictions, struggles and activities that make the theoretical shift towards strategic inclusivity unstable, partial and by no means inevitable. A further contribution is a linking of this broader strategic debate, with anxieties over the influence of marketing in corporate strategizing. This leads to a discussion of the various ways that marketing research can sooth the anxiety of influence on multiple fronts via: understanding agency and strategic action; shaping marketing curriculum development; and, reconsidering the spatial dimensions of marketing influence. © 2010 Taylor & Francis.

Comparative analysis of experimental and modelling of gas-solid flow hydrodynamics:effect of friction and interparticle cohesion forces

The effect of friction and interparticle cohesion forces on the gas-solid flow hydrodynamics was discussed. A proposed interparticle cohesion and frictional force terms have been tested in a continuum fully developed flow model to investigate their effect on the general hydrodynamic features of vertical duct flow. It was observed that both terms have direct effect on lowering the material carryover, which implies a reduced bed expansion in freely bubbling column. The parametric analysis shows that cohesion and frictional forces are high when compared to kinetic stress and hence it can play a major role in describing the hydrodynamics features of the flow.

Cell exclusion in couette flow:evaluation through flow visualisation and mechanical forces

Cell exclusion is the phenomenon whereby the hematocrit and viscosity of blood decrease in areas of high stress. While this is well known in naturally occurring Poiseuille flow in the human body, it has never previously been shown in Couette flow, which occurs in implantable devices including blood pumps. The high-shear stresses that occur in the gap between the boundaries in Couette flow are known to cause hemolysis in erythrocytes. We propose to mitigate this damage by initiating cell exclusion through the use of a spiral-groove bearing (SGB) that will provide escape routes by which the cells may separate themselves from the plasma and the high stresses in the gap. The force between two bearings (one being the SGB) in Couette flow was measured. Stained erythrocytes, along with silver spheres of similar diameter to erythrocytes, were visualized across a transparent SGB at various gap heights. A reduction in the force across the bearing for human blood, compared with fluids of comparable viscosity, was found. This indicates a reduction in the viscosity of the fluid across the bearing due to a lowered hematocrit because of cell exclusion. The corresponding images clearly show both cells and spheres being excluded from the gap by entering the grooves. This is the first time the phenomenon of cell exclusion has been shown in Couette flow. It not only furthers our understanding of how blood responds to different flows but could also lead to improvements in the future design of medical devices.

On the role of surface roughness in the aerodynamic performance and energy conversion of horizontal wind turbine blades:a review

Summary: Renewable energy is one of the main pillars of sustainable development, especially in developing economies. Increasing energy demand and the limitation of fossil fuel reserves make the use of renewable energy essential for sustainable development. Wind energy is considered to be one of the most important resources of renewable energy. In North African countries, such as Egypt, wind energy has an enormous potential; however, it faces quite a number of technical challenges related to the performance of wind turbines in the Saharan environment. Seasonal sand storms affect the performance of wind turbines in many ways, one of which is increasing the wind turbine aerodynamic resistance through the increase of blade surface roughness. The power loss because of blade surface deterioration is significant in wind turbines. The surface roughness of wind turbine blades deteriorates because of several environmental conditions such as ice or sand. This paper is the first review on the topic of surface roughness effects on the performance of horizontal-axis wind turbines. The review covers the numerical simulation and experimental studies as well as discussing the present research trends to develop a roadmap for better understanding and improvement of wind turbine performance in deleterious environments.

Research on the influence of behavioral forces that motivate trader behavior and sentiment: A prospect theory exegesis

This study focuses on empirical investigations and seeks implications by utilizing three different methodologies to test various aspects of trader behavior. The first methodology utilizes Prospect Theory to determine trader behavior during periods of extreme wealth contracting periods. Secondly, a threshold model to examine the sentiment variable is formulated and thirdly a study is made of the contagion effect and trader behavior. ^ The connection between consumers' sense of financial well-being or sentiment and stock market performance has been studied at length. However, without data on actual versus experimental performance, implications based on this relationship are meaningless. The empirical agenda included examining a proprietary file of daily trader activities over a five-year period. Overall, during periods of extreme wealth altering conditions, traders "satisfice" rather than choose the "best" alternative. A trader's degree of loss aversion depends on his/her prior investment performance. A model that explains the behavior of traders during periods of turmoil is developed. Prospect Theory and the data file influenced the design of the model. ^ Additional research included testing a model that permitted the data to signal the crisis through a threshold model. The third empirical study sought to investigate the existence of contagion caused by declining global wealth effects using evidence from the mining industry in Canada. Contagion, where a financial crisis begins locally and subsequently spreads elsewhere, has been studied in terms of correlations among similar regions. The results provide support for Prospect Theory in two out of the three empirical studies. ^ The dissertation emphasizes the need for specifying precise, testable models of investors' expectations by providing tools to identify paradoxical behavior patterns. True enhancements in this field must include empirical research utilizing reliable data sources to mitigate data mining problems and allow researchers to distinguish between expectations-based and risk-based explanations of behavior. Through this type of research, it may be possible to systematically exploit "irrational" market behavior. ^

Capabilities of Police and Military Forces in Central America -- A Comparative Analysis of Guatemala, El Salvador, Honduras an d Nicaragua

A difficult transition to a new paradigm of Democratic Security and the subsequent process of military restructuring during the nineties led El Salvador, Honduras, Guatemala and Nicaragua to re-consider their old structures and functions of their armed forces and police agencies. This study compares the institutions in the four countries mentioned above to assess their current condition and response capacity in view of the contemporary security challenges in Central America. This report reveals that the original intention of limiting armies to defend and protect borders has been threatened by the increasing participation of armies in public security. While the strength of armies has been consolidated in terms of numbers, air and naval forces have failed to become strengthened or sufficiently developed to effectively combat organized crime and drug trafficking and are barely able to conduct air and sea operations. Honduras has been the only country that has maintained a proportional distribution of its armed forces. However, security has been in the hands of a Judicial Police, supervised by the Public Ministry. The Honduran Judicial Police has been limited to exercising preventive police duties, prohibited from carrying out criminal investigations. Nicaragua, meanwhile, possesses a successful police force, socially recognized for maintaining satisfactory levels of security surpassing the Guatemalan and El Salvadoran police, which have not achieved similar results despite of having set up a civilian police force separate from the military. El Salvador meanwhile, has excelled in promoting a Police Academy and career professional education, even while not having military attachés in other countries. Regarding budgetary issues, the four countries allocate almost twice the amount of funding on their security budgets in comparison to what is allocated to their defense budgets. However, spending in both areas is low when taking into account each country's GDP as well as their high crime rates. Regional security challenges must be accompanied by a professionalization of the regional armies focused on protecting and defending borders. Therefore, strong institutional frameworks to support the fight against crime and drug trafficking are required. It will require the strengthening of customs, greater control of illicit arms trafficking, investment in education initiatives, creating employment opportunities and facilitating significant improvements in the judicial system, as well as its accessibility to the average citizen.

Beyond the Pay: Current Illicit Activities of the Armed Forces in Central America

The growth of criminal gangs and organized crime groups has created unprecedented challenges in Central America. Homicide rates are among the highest in the world, countries spend on average close to 10 percent of GDP to respond to the challenges of public insecurity, and the security forces are frequently overwhelmed and at times coopted by the criminal groups they are increasingly tasked to counter. With some 90 percent of the 700 metric tons of cocaine trafficked from South America to the United States passing through Central America, the lure of aiding illegal traffickers through provision of arms, intelligence, or simply withholding or delaying the use of force is enormous. These conditions raise the question: to what extent are militaries in Central America compromised by illicit ties to criminal groups? The study focuses on three cases: Nicaragua, El Salvador, and Honduras. It finds that: Although illicit ties between the military and criminal groups have grown in the last decade, militaries in these countries are not yet “lost’ to criminal groups. Supplying criminal groups with light arms from military stocks is typical and on the rise, but still not common. In general the less exposed services, the navies and air forces, are the most reliable and effective ones in their roles in interdiction. Of the three countries in the study, the Honduran military is the most worrying because it is embedded in a context where civilian corruption is extremely common, state institutions are notoriously weak, and the political system remains polarized and lacks the popular legitimacy and political will needed to make necessary reforms. Overall, the armed forces in the three countries remain less compromised than civilian peers, particularly the police. However, in the worsening crime and insecurity context, there is a limited window of opportunity in which to introduce measures targeted toward the military, and such efforts can only succeed if opportunities for corruption in other sectors of the state, in particular in law enforcement and the justice system, are also addressed. Measures targeted toward the military should include: Enhanced material benefits and professional education opportunities that open doors for soldiers in promising legitimate careers once they leave military service. A clear system of rewards and punishments specifically designed to deter collusion with criminal groups. More effective securing of military arsenals. Skills and external oversight leveraged through combined operations, to build cooperation among those sectors of the military that have successful and clean records in countering criminal groups, and to expose weaker forces to effective best practices.

Reducing uncertainties in estimation of wind effects on tall buildings using aerodynamic wind tunnel tests

Tall buildings are wind-sensitive structures and could experience high wind-induced effects. Aerodynamic boundary layer wind tunnel testing has been the most commonly used method for estimating wind effects on tall buildings. Design wind effects on tall buildings are estimated through analytical processing of the data obtained from aerodynamic wind tunnel tests. Even though it is widely agreed that the data obtained from wind tunnel testing is fairly reliable the post-test analytical procedures are still argued to have remarkable uncertainties. This research work attempted to assess the uncertainties occurring at different stages of the post-test analytical procedures in detail and suggest improved techniques for reducing the uncertainties. Results of the study showed that traditionally used simplifying approximations, particularly in the frequency domain approach, could cause significant uncertainties in estimating aerodynamic wind-induced responses. Based on identified shortcomings, a more accurate dual aerodynamic data analysis framework which works in the frequency and time domains was developed. The comprehensive analysis framework allows estimating modal, resultant and peak values of various wind-induced responses of a tall building more accurately. Estimating design wind effects on tall buildings also requires synthesizing the wind tunnel data with local climatological data of the study site. A novel copula based approach was developed for accurately synthesizing aerodynamic and climatological data up on investigating the causes of significant uncertainties in currently used synthesizing techniques. Improvement of the new approach over the existing techniques was also illustrated with a case study on a 50 story building. At last, a practical dynamic optimization approach was suggested for tuning structural properties of tall buildings towards attaining optimum performance against wind loads with less number of design iterations.

Research on the influence of behavioral forces that motivate trader behavior and sentiment- a prospect theory exegesis

This study focuses on empirical investigations and seeks implications by utilizing three different methodologies to test various aspects of trader behavior. The first methodology utilizes Prospect Theory to determine trader behavior during periods of extreme wealth contracting periods. Secondly, a threshold model to examine the sentiment variable is formulated and thirdly a study is made of the contagion effect and trader behavior. The connection between consumers' sense of financial well-being or sentiment and stock market performance has been studied at length. However, without data on actual versus experimental performance, implications based on this relationship are meaningless. The empirical agenda included examining a proprietary file of daily trader activities over a five-year period. Overall, during periods of extreme wealth altering conditions, traders "satisfice" rather than choose the "best" alternative. A trader's degree of loss aversion depends on his/her prior investment performance. A model that explains the behavior of traders during periods of turmoil is developed. Prospect Theory and the data file influenced the design of the model. Additional research included testing a model that permitted the data to signal the crisis through a threshold model. The third empirical study sought to investigate the existence of contagion caused by declining global wealth effects using evidence from the mining industry in Canada. Contagion, where a financial crisis begins locally and subsequently spreads elsewhere, has been studied in terms of correlations among similar regions. The results provide support for Prospect Theory in two out of the three empirical studies. The dissertation emphasizes the need for specifying precise, testable models of investors' expectations by providing tools to identify paradoxical behavior patterns. True enhancements in this field must include empirical research utilizing reliable data sources to mitigate data mining problems and allow researchers to distinguish between expectations-based and risk-based explanations of behavior. Through this type of research, it may be possible to systematically exploit "irrational" market behavior.