Phenol-furfural resins to elaborate composites, reinforced with sisal fibers - Molecular analysis of resin and properties of composites

Resol type resins were prepared in alkaline conditions (potassium hydroxide or potassium carbonate) using furfural obtained by acid hydrolysis of abundant renewable resources from agricultural and forestry waste residues. The structures of the resins were fully determined by H-1, C-13, and 2D NMR spectrometries with the help of four models compounds synthesized specially for this study. MALDI-Tof mass spectrometry experiments indicated that a majority of linear oligomers and a minority of cyclic ones constituted them. Composites were prepared with furfural-phenol resins and sisal fibers. These fibers were chosen mainly because they came from natural lignocellulosic material and they presented excellent mechanical microscopy images indicated that the composites displayed excellent adhesion between resin and fibers. Impact strength measurement showed that mild conditions were more suitable to prepare thermosets. Nevertheless, mild conditions induced a high-diffusion coefficient for water absorption by composites. Composites with good properties could be prepared using high proportion of materials obtained from biomass without formaldehyde. (c) 2008 Wiley Periodicals, Inc.

Temperature (over) compensation in an oscillatory surface reaction

Biological rhythms are regulated by homeostatic mechanisms that assure that physiological clocks function reliably independent of temperature changes in the environment. Temperature compensation, the independence of the oscillatory period on temperature, is known to play a central role in many biological rhythms, but it is rather rare in chemical oscillators. We study the influence of temperature on the oscillatory dynamics during the catalytic oxidation of formic acid on a polycrystalline platinum electrode. The experiments are performed at five temperatures from 5 to 25 degrees C, and the oscillations are studied under galvanostatic control. Under oscillatory conditions, only non-Arrhenius behavior is observed. Overcompensation with temperature coefficient (q(10), defined as the ratio between the rate constants at temperature T + 10 degrees C and at T) < I is found in most cases, except that temperature compensation with q(10) approximate to I predominates at high applied currents. The behavior of the period and the amplitude result from a complex interplay between temperature and applied current or, equivalently, the distance from thermodynamic equilibrium. High, positive apparent activation energies were obtained under voltammetric, nonoscillatory conditions, which implies that the non-Arrhenius behavior observed under oscillatory conditions results from the interplay among reaction steps rather than, from a weak temperature dependence of the individual steps.

Biobased composites from glyoxal-phenolic resins and sisal fibers

Lignocellulosic materials can significantly contribute to the development of biobased composites. In this work, glyoxal-phenolic resins for composites were prepared using glyoxal, which is a dialdehyde obtained from several natural resources. The resins were characterized by (1)H, (13)C, (2)D, and (31)P NMR spectroscopies. Resorcinol (10%) was used as an accelerator for curing the glyoxal-phenol resins in order to obtain the thermosets. The impact-strength measurement showed that regardless of the cure cycle used, the reinforcement of thermosets by 30% (w/w) sisal fibers improved the impact strength by one order of magnitude. Curing with cycle 1 (150 degrees C) induced a high diffusion coefficient for water absorption in composites, due to less interaction between the sisal fibers and water. The composites cured with cycle 2 (180 degrees C) had less glyoxal resin coverage of the cellulosic fibers, as observed by images of the fractured interface observed by SEM. This study shows that biobased composites with good properties can be prepared using a high proportion of materials obtained from natural resources. (C) 2009 Elsevier Ltd. All rights reserved.

Phenolic matrices and sisal fibers modified with hydroxy terminated polybutadiene rubber: Impact strength, water absorption, and morphological aspects of thermosets and composites

The aim of the present work was to investigate the toughening of phenolic thermoset and its composites reinforced with sisal fibers, using hydroxyl-terminated polybutadiene rubber (HTPB) as both impact modifier and coupling agent. Substantial increase in the impact strength of the thermoset was achieved by the addition 10% of HTPB. Scanning electron microscopy (SEM) images of the material with 15% HTPB content revealed the formation of some rubber aggregates that reduced the efficiency of the toughening mechanism. In composites, the toughening effect was observed only when 2.5% of HTPB was added. The rubber aggregates were found located mainly at the matrix-fiber interface suggesting that HTPB could be used as coupling agent between the sisal fibers and the phenolic matrix. A composite reinforced with sisal fibers pre-impregnated with HTPB was then prepared; its SEM images showed the formation of a thin coating of HTPB on the surface of the fibers. The ability of HTBP as coupling agent between sisal fibers and phenolic matrix was then investigated by preparing a composite reinforced with sisal fibers pre-treated with HTPB. As revealed by its SEM images, the HTPB pre-treatment of the fibers resulted on the formation of a thin coating of HTPB on the surface of the fibers, which provided better compatibility between the fibers and the matrix at their interface, resulting in a material with low water absorption capacity and no loss of impact strength. (C) 2009 Elsevier B.V. All rights reserved.

Analytical Assessment of a Home Made Capillary Electrophoresis Equipment with Linear Charge Coupled Device for Visible Light Absorption Detection in the Determination of Food Dyes

The performance of modular home made capillary electrophoresis equipment with spectrophotometric detection, at a visible region by means of a miniaturized linear charge coupled device, was evaluated for the determination of four food dyes. This system presents a simple but efficient home made cell detection scheme. A computer program that converts the spectral data after each run into the electropherograms was developed to evaluate the analytical parameters. The dyes selected for analytical evaluation of the system were Brilliant Blue FCF, Fast Green FCF, Sunset Yellow FCF, and Amaranth. Separation was carried out in a 29cm length and 75 mu m I.D fused silica capillary, using 10mmolL-1 borate buffer at pH 9, with separation voltage of 7.5kV. The detection limits for the dyes were between 0.3 and 1.5mgL-1 and the method presented adequate linearity over the ranges studied, with correlation coefficients greater than 0.99. The method was applied for determination and quantification of these dyes in fruit juices and candies.

A surface-enhanced infrared absorption spectroscopic (SEIRAS) study of the oscillatory electro-oxidation of methanol on platinum

The oscillatory electro-oxidation of methanol was studied by means of in situ infrared (IR) spectroscopy in the attenuated total reflection (ATR) configuration using a platinum film on a Si prism as working electrode. The surface-enhanced infrared absorption (SEIRA) effect considerably improves the spectroscopic resolution, allowing at following the coverage of some adsorbing species during the galvanostatic oscillations. Carbon monoxide was the main adsorbed specie observed in the induction period and within the oscillatory regime. The system was investigated at two distinct time-scales and its dynamics characterized accordingly. During the induction period the main transformation observed as the system move through the phase space towards the oscillatory region was the decrease of the coverage of adsorbed carbon, coupled to the increase of the electrode potential. Similar transition characterizes the evolution within the oscillatory region, but at a considerably slower rate. Experiments with higher time resolution revealed that the electrode potential oscillates in-phase with the frequency of the linearly adsorbed CO vibration and that the amount of adsorbed CO oscillates with small amplitude. Adsorbed formate was found to play, if any, a very small role. Results are discussed and compared with other systems. (C) 2010 Elsevier B.V. All rights reserved.

A pharmacokinetic-pharmacodynamic model for duodenal levodopa infusion

Objective Levodopa in presence of decarboxylase inhibitors is following two-compartment kinetics and its effect is typically modelled using sigmoid Emax models. Pharmacokinetic modelling of the absorption phase of oral distributions is problematic because of irregular gastric emptying. The purpose of this work was to identify and estimate a population pharmacokinetic- pharmacodynamic model for duodenal infusion of levodopa/carbidopa (Duodopa®) that can be used for in numero simulation of treatment strategies. Methods The modelling involved pooling data from two studies and fixing some parameters to values found in literature (Chan et al. J Pharmacokinet Pharmacodyn. 2005 Aug;32(3-4):307-31). The first study involved 12 patients on 3 occasions and is described in Nyholm et al. Clinical Neuropharmacology 2003:26:156-63. The second study, PEDAL, involved 3 patients on 2 occasions. A bolus dose (normal morning dose plus 50%) was given after a washout during night. Plasma samples and motor ratings (clinical assessment of motor function from video recordings on a treatment response scale between -3 and 3, where -3 represents severe parkinsonism and 3 represents severe dyskinesia.) were repeatedly collected until the clinical effect was back at baseline. At this point, the usual infusion rate was started and sampling continued for another two hours. Different structural absorption models and effect models were evaluated using the value of the objective function in the NONMEM package. Population mean parameter values, standard error of estimates (SE) and if possible, interindividual/interoccasion variability (IIV/IOV) were estimated. Results Our results indicate that Duodopa absorption can be modelled with an absorption compartment with an added bioavailability fraction and a lag time. The most successful effect model was of sigmoid Emax type with a steep Hill coefficient and an effect compartment delay. Estimated parameter values are presented in the table. Conclusions The absorption and effect models were reasonably successful in fitting observed data and can be used in simulation experiments.

Efeitos de variáveis abióticas na composição química de Gelidium Crinale (Gelidiaceae, Rhodophyta) em cultivo unialgal

Os efeitos individuais e interativos dos parâmetros ambientais físicos e químicos, como temperatura, intensidade luminosa, salinidade e concentração de fósforo inorgânico dissolvido na água do mar, na produção de proteínas, carboidratos, acúmulo de fósforo tecidual e taxa de absorção do fósforo inorgânico disponível no meio de cultura em Gelidium crinale (Turner) Lamouroux, foram investigados durante um período de sete dias de cultivo laboratorial, em condições controladas. A ação dos parâmetros abióticos foi analisada de três maneiras diferentes. A primeira avaliação integrou a ação de temperatura, intensidade luminosa e fósforo inorgânico dissolvido, mantendo-se fixa a salinidade em 25 ups, onde se constatou que em todos os componentes químicos algais ocorreram interações de terceira ordem. O incremento de 2,28 a 2,67 % nos teores de proteínas foram obtidos à temperatura de 25 °C e 12 μmol m-2 s-1 de intensidade luminosa, diminuindo com a elevação da intensidade luminosa para 40 μmol m-2 s-1. Para carboidratos, ocorreram interações significativas entre os três parâmetros, com um aumento de 6,85 % sendo registrado a 25 °C de temperatura, 24 μmol m-2 s-1 de intensidade luminosa e 10,0 μM de fósforo inorgânico. O aumento máximo na taxa de fósforo tecidual (0,56 %) ocorreu em talos cultivados nas menores temperatura e intensidade luminosa e na maior concentração de fósforo inorgânico dissolvido. Com relação à intensidade luminosa, foi observada uma correlação negativa entre proteínas e carboidratos. A segunda avaliação estabeleceu a ação independente e sinérgica de temperatura, salinidade e fósforo inorgânico disponível no meio de cultivo, fixando-se a intensidade luminosa em 24 μmol m-2s-1. A maior produção de proteínas ocorreu em cultivos onde a temperatura foi de 25 °C, com uma concentração de 5,0 e 10,0 μM de fósforo inorgânico dissolvido e salinidade entre 15 e 20 ups, cujos valores médios do incremento variaram entre 2,62 a 2,83 % peso seco de alga, resultando em uma interação de terceira ordem altamente significativa. Para carboidratos a elevação de 6,85 % em sua concentração está associada à maior temperatura (25 °C), maior salinidade (25 ups) e maior quantidade de fósforo inorgânico disponível no meio de cultivo (10,0 μM). Contudo, não foi observada uma interação de terceira ordem através da análise estatística. Para esta biomolécula observaram-se interações de segunda ordem altamente significativa (P < 0,005) entre temperatura e diferentes concentrações de fósforo inorgânico e entre temperatura e salinidade (P < 0,000). O acúmulo de fósforo nos talos da alga foi menor durante os cultivos em que a salinidade foi de 25 ups,nas temperaturas de 20 e 25 °C e concentração de fósforo disponível de 2,5 μM, com percentuais entre 0,08 a 0,11 % em peso de cinzas. O maior incremento ocorreu na menor temperatura, associada à baixa salinidade e alta concentração de fósforo inorgânico no meio. O coeficiente de correlação de Pearson revelou correlações positivas, altamente significativas (P < 0,001) entre teor de proteína, temperatura e disponibilidade de fósforo inorgânico no meio de cultivo. Para carboidratos, as correlações foram positivas com os três parâmetros abióticos. Para fósforo tecidual somente com o fósforo inorgânico disponível no cultivo foi que ocorreu uma relação positiva; com os outros dois parâmetros esta correlação foi negativa. Entre os componentes químicos encontrados nas algas, proteínas e carboidratos apresentaram uma relação positiva, porém fósforo tecidual apresentou uma correlação negativa com ambos, embora com proteínas esta relação não tenha sido significativa. A terceira avaliação estudou a ação individual e o sinergismo entre os parâmetros ambientais, temperatura, intensidade luminosa e salinidade, a uma concentração fixa de fósforo inorgânico disponível no meio de cultivo (10,0 μM), sobre a composição química, bem como na taxa de absorção de fósforo inorgânico disponível. Observou-se a ocorrência de interações de terceira ordem em todos as variáveis estudadas. O teor de proteínas apresentou um aumento de 3,72 % durante o período de cultivo, passando de 20,63 % antes do cultivo, para 24,35 % após o término do experimento, principalmente nas condições de 25 °C de temperatura, 12 μmol m-2s-1 de intensidade luminosa e 15 ups de salinidade. Para carboidratos, nas condições de baixa intensidade luminosa (12 μmol m-2s- 1), a uma temperatura de 20 °C e salinidades de 10 e 15 ups, foram registrados valores inferiores à amostra controle, caracterizando um consumo desta biomolécula por parte das algas. Nestas mesmas condições ambientais, foram registrados os maiores teores de fósforo tecidual, variando entre 0,86 a 1,09 % do peso das cinzas. As maiores taxas de absorção do fósforo do meio ocorreram na salinidade de 25 ups e 25 °C de temperatura, diminuindo da intensidade luminosa de 12 μmol m-2s-1 para 40 μmol m-2s-1. As maiores concentrações de fósforo inorgânico residual na água do meio de cultivo ocorreram nas salinidades de 10 e 15 ups, em todas as intensidade luminosas e temperaturas estudadas. Através do coeficiente de correlação de Pearson, observou-se que os teores de proteínas apresentaram uma forte correlação negativa com a intensidade luminosa e positiva com a temperatura e salinidade, embora com esta última não tenha sido significativa. Para carboidratos, as correlações com os parâmetros abióticos foram todas positivas. Correlações negativa e positiva, não significativas, foram observadas entre esta biomolécula e o teor de proteínas e a taxa de absorção de fósforo disponível no meio, respectivamente. Por outro lado, com fósforo tecidual, ocorreu uma correlação negativa, altamente significativa. Este estudo mostra o estado fisiológico de Gelidium crinale e contribui para o estabelecimento das melhores condições de cultivo para produção de proteína, carboidrato e fósforo tecidual e indicação do uso racional de nutrientes, fornecendo informações para a otimização de processos de maricultura, tanto em termos de cultivo bem sucedido de algas, quanto de redução no impacto sobre o ambiente.

A (semi-)parametric functional coefficient autoregressive conditional duration model

In this paper, we propose a class of ACD-type models that accommodates overdispersion, intermittent dynamics, multiple regimes, and sign and size asymmetries in financial durations. In particular, our functional coefficient autoregressive conditional duration (FC-ACD) model relies on a smooth-transition autoregressive specification. The motivation lies on the fact that the latter yields a universal approximation if one lets the number of regimes grows without bound. After establishing that the sufficient conditions for strict stationarity do not exclude explosive regimes, we address model identifiability as well as the existence, consistency, and asymptotic normality of the quasi-maximum likelihood (QML) estimator for the FC-ACD model with a fixed number of regimes. In addition, we also discuss how to consistently estimate using a sieve approach a semiparametric variant of the FC-ACD model that takes the number of regimes to infinity. An empirical illustration indicates that our functional coefficient model is flexible enough to model IBM price durations.

Dietary copper absorption and excretion in three semi-terrestrial grapsoid crabs with different levels of terrestrial adaptation

Three species of phylogenetically related semi-terrestrial crabs (Superfamily Grapsoidea - Sesarma rectum, Goniopsis cruentata and Neohelice granulata (formerly: Chasmagnathus granulatus) with different degrees of terrestriality were studied to quantify the accumulation of copper (Cu) in hemolymph, gills, hepatopancreas and antennal gland, and its excretion through the faeces. These crabs were fed for 15 days practical diets containing 0 (A), 0.5 (B), 1.0 (C), and 1.5% (D) of added CuCl2 (corresponding to 0, 0.2, 0.5 and 0.7% of Cu2+, respectively). The amount of food ingested was directly proportional to the degree of terrestriality: S. rectum, the most terrestrial species, ate around 2-3 times more than the other crabs, whereas G. cruentata ate 1.5-2 times more than N. granulata, the least terrestrial. The amount of Cu excreted in the feces was proportional to Cu ingestion, and was 76.8% and 64.2% higher for Sesarma fed diet D compared to G. cruentata and N. granulata, respectively. Sesarma also displayed higher Cu concentration in the haemolymph, gills and antennal glands, but not in the hepatopancreas. A detoxifying mechanism followed by elimination was probably present at this last organ, preventing Cu accumulation. More terrestrial crabs, such as Sesarma, may accumulate more Cu in hemolymph and tissues, showing a correlation between metal accumulation and increased terrestriality. In this aspect, contaminated feed sources with Cu may have more impact in conservation of terrestrial crabs. (C) 2008 Elsevier B.V. All rights reserved.

Perdas endógenas e coeficientes de absorção aparente e real do magnésio em caprinos

Os objetivos deste trabalho foram determinar a absorção aparente, estimar as perdas endógenas fecais e a absorção real do Mg e determinar a ingestão ad libitum da água de beber e a concentração de Mg no soro sangüíneo de caprinos da raças Anglonubiana (AN) e Saanen (SN). Foram usados doze caprinos, seis de cada raça, com 19,8 kg PV médio. Dietas semipurificadas (baixo teor de Mg) à base de quirera de arroz, glúten de milho e celulose foram suplementadas com MgO, para se obterem os níveis de 0,05 (sem supplementação) 0,20 e 0,35% Mg (%MS). Os níveis de Mg influenciaram os coeficientes de absorção aparente de Mg e Ca, com valores médios de 57,8; 73,9; e 73,2% para Mg e 55,7; 39,6; e 49,5% para Ca, para dietas com níveis 0,05; 0,20; e 0,35% de Mg, respectivamente. Entretanto, para os coeficientes de absorção aparente de P, Na e K, não houve efeito de níveis de Mg na dieta. Os resultados de absorção real de Mg apresentaram interação de níveis de Mg e raças. A média para raça NA, no nível 0,05% Mg, foi de 61,0% e para os níveis 0,20 e 0,35% Mg, 77,2 e 73,2%, respectivamente. Entretanto, para a raça SN, as médias foram 73,3; 75,5; e 76,0%, para os mesmos níveis, sem diferenças. A digestibilidade de matéria seca, proteína bruta e extrato não-nitrogenado diminuiu com os níveis crescentes de Mg nas dietas. As excreções fecais (7,0; 20,8; e 34,4 mg/kg PV0,75.d) e urinárias (3,9; 30,8; e 44,6 mg/kg PV0,75.d) de Mg elevaram-se com o aumento dos níveis crescentes de Mg nas dietas. Houve, também, influência dos níveis de Mg dietético sobre as concentrações de Mg do soro sangüíneo (1,74; 2,23; e 2,80 mg/dL para níveis de 0,05; 0,20; e 0,35% de Mg, respectivamente).

Chromic oxide as a digestibility marker for dogs - A comparison of methods of analysis

The study reported compared coefficients of apparent digestibility (CAD) obtained by total collection (TC) and by chromic oxide (Cr2O3) determined by visible absorption spectrometry (VIS) and flame atomic absorption spectrophotometry (FAAS). These quantification methods were also investigated to assess their precision. Nineteen adult dogs housed in individual digestibility cages were fed three commercial diets, each test including five or seven animals. The experiment was carried out in a completely randomized design with three among-subjects factors (foods) and three within-subject factors (methods), and the dogs were the experimental unit. Estimated CAD for all dietary components in the three diets by either chromium quantification methods did not differ and showed fair agreement with TC results (P > 0.05). Coefficients of chromic oxide recoveries in feces were 1.06 +/- 0.044 and 1.01 +/- 0.045 for VIS and FAAS, respectively, values significantly different (P < 0.05), indicating better recovery for FAAS. Significant differences (P<0.05) were found in the mean concentration of Cr2O3 for diets and feces (17 +/- 0.6 and 19 +/- 0.8g/kg for VIS and FAAS, respectively). Coefficient of variation for FAAS was 1.69% and 1.77% for VIS, which did not differ significantly (P > 0.05). Pearson's correlation coefficient (r=0.99; P < 0.01) indicated positive and significant association among the results for VIS and FASS, indicating reasonable precision and agreement of chromic oxide contents determined by these methods. Therefore, FAAS and VIS can be used successfully to determine Cr2O3 in dog foods and feces. (c) 2006 Elsevier B.V. All rights reserved.

Nutrient digestibility, but not mineral absorption, is age-dependent in cats

Availability of nutrients is influenced by extremes of age, and a better characterization of this influence is necessary for appropriate development of foods and nutritional management throughout life stages of cats. This study investigated nutrient digestibility, mineral absorption, faeces and urine production in three groups of six young, mature and old cats fed two diets containing different energy densities. Apparent digestibility and mineral absorption were calculated by total collection method and values were tested with ANOVA and regression analysis. A quadratic relationship was detected between age and digestibility of dry matter, organic matter, crude protein, acid-hydrolysed fat and starch in the low-energy diet. Starch digestibility showed the same response in the high-energy diet. Young adult cats had intermediate digestibility, mature cats the highest and old cats the lowest. Mineral absorption (calcium, phosphorus, magnesium, sodium, potassium and chloride) and urinary pH were not different among groups. These findings confirm previous studies that found low digestibility of nutrients in some old cats, and support evidence that this trend is even more important in less digestible dry foods. on the contrary, data suggest that mineral formulations do not need to be varied in diets for adult cats of different ages.

Effects of plant densities and management of purple nutsedge on sugarcane yield and effect of growth stages and main way of herbicides contact and absorption on the control of tubers

Field experiments carried out with Cyperus rotundus L. at low (58-246), medium (318773), and high (675-1198 shoots/m(2)) densities showed sugarcane yield reductions of 13.5, 29.3, and 45.2%, respectively in relation to the control. In the second field experiment, the integration of a mechanic method with two sequences of plowing and disking operations in the dry season, and complementary applications of trifloxysulfuron-sodium + ametrine and sulfentrazone (rainy season) was studied. Average of the chain connected to original shoot showed 92, 95, and 65% of reduction with trifloxysulfuron-sodium + ametrine and surfactant, at the application stages early, preflowering, and full flowering, respectively.