Proof of causation in informed consent cases : establishing what the plaintiff would have done

A degree of judicial caution in accepting the assertion of a plaintiff as to what he or she would have done, if fully informed of risks, is clearly evident upon a review of decisions applying the common law. Civil liability legislation in some jurisdictions now precludes assertion evidence by a plaintiff. Although this legislative change was seen as creating a significant challenge for plaintiffs seeking to discharge the onus of proof of establishing causation in such cases, recent decisions suggest a more limited practical effect. While a plaintiff’s ex post facto assertions as to what he or she would have done if fully informed of risks may now be inadmissible, objective and subjective evidence as to the surrounding facts and circumstances, in particular the plaintiff’s prior attitudes and conduct, and the assertion evidence of others remains admissible. Given the court’s reliance on both objective and subjective evidence, statistical evidence may be of increasing importance.

Science and technology supervision resources

This document is an adaptation of a report submitted to the ALTC in 2009, with additional data collected through subsequent interviews with science supervisors. The organisation of the contents also reflects a development of thought since the original project. The framework presented in this document is intended to provide science and technology supervisors with a range of options with respect to supervisory pedagogy. It has been developed to highlight different aspects of thinking about supervision as a teaching and learning practice; as well as approaches, strategies and roles associated with supervision. It will enable science and technology supervisors to become aware of the diverse options available to them and provide systematic ways of thinking about supervisory practices. Use of this framework will encourage supervisors to make choices based on broader, rather than more limited, repertoires. It will also encourage thinking about supervision as a teaching and learning practice.

Wavelet based approaches and high resolution methods for complex process models

Many industrial processes and systems can be modelled mathematically by a set of Partial Differential Equations (PDEs). Finding a solution to such a PDF model is essential for system design, simulation, and process control purpose. However, major difficulties appear when solving PDEs with singularity. Traditional numerical methods, such as finite difference, finite element, and polynomial based orthogonal collocation, not only have limitations to fully capture the process dynamics but also demand enormous computation power due to the large number of elements or mesh points for accommodation of sharp variations. To tackle this challenging problem, wavelet based approaches and high resolution methods have been recently developed with successful applications to a fixedbed adsorption column model. Our investigation has shown that recent advances in wavelet based approaches and high resolution methods have the potential to be adopted for solving more complicated dynamic system models. This chapter will highlight the successful applications of these new methods in solving complex models of simulated-moving-bed (SMB) chromatographic processes. A SMB process is a distributed parameter system and can be mathematically described by a set of partial/ordinary differential equations and algebraic equations. These equations are highly coupled; experience wave propagations with steep front, and require significant numerical effort to solve. To demonstrate the numerical computing power of the wavelet based approaches and high resolution methods, a single column chromatographic process modelled by a Transport-Dispersive-Equilibrium linear model is investigated first. Numerical solutions from the upwind-1 finite difference, wavelet-collocation, and high resolution methods are evaluated by quantitative comparisons with the analytical solution for a range of Peclet numbers. After that, the advantages of the wavelet based approaches and high resolution methods are further demonstrated through applications to a dynamic SMB model for an enantiomers separation process. This research has revealed that for a PDE system with a low Peclet number, all existing numerical methods work well, but the upwind finite difference method consumes the most time for the same degree of accuracy of the numerical solution. The high resolution method provides an accurate numerical solution for a PDE system with a medium Peclet number. The wavelet collocation method is capable of catching up steep changes in the solution, and thus can be used for solving PDE models with high singularity. For the complex SMB system models under consideration, both the wavelet based approaches and high resolution methods are good candidates in terms of computation demand and prediction accuracy on the steep front. The high resolution methods have shown better stability in achieving steady state in the specific case studied in this Chapter.

Attractiveness of venture idea amongst expert entrepreneurs : a conjoint analysis

Principal Topic Venture ideas are at the heart of entrepreneurship (Davidsson, 2004). However, we are yet to learn what factors drive entrepreneurs’ perceptions of the attractiveness of venture ideas, and what the relative importance of these factors are for their decision to pursue an idea. The expected financial gain is one factor that will obviously influence the perceived attractiveness of a venture idea (Shepherd & DeTienne, 2005). In addition, the degree of novelty of venture ideas along one or more dimensions such as new products/services, new method of production, enter into new markets/customer and new method of promotion may affect their attractiveness (Schumpeter, 1934). Further, according to the notion of an individual-opportunity nexus venture ideas are closely associated with certain individual characteristics (relatedness). Shane (2000) empirically identified that individual’s prior knowledge is closely associated with the recognition of venture ideas. Sarasvathy’s (2001; 2008) Effectuation theory proposes a high degree of relatedness between venture ideas and the resource position of the individual. This study examines how entrepreneurs weigh considerations of different forms of novelty and relatedness as well as potential financial gain in assessing the attractiveness of venture ideas. Method I use conjoint analysis to determine how expert entrepreneurs develop preferences for venture ideas which involved with different degrees of novelty, relatedness and potential gain. The conjoint analysis estimates respondents’ preferences in terms of utilities (or part-worth) for each level of novelty, relatedness and potential gain of venture ideas. A sample of 32 expert entrepreneurs who were awarded young entrepreneurship awards were selected for the study. Each respondent was interviewed providing with 32 scenarios which explicate different combinations of possible profiles open them into consideration. Results and Implications Results indicate that while the respondents do not prefer mere imitation they receive higher utility for low to medium degree of newness suggesting that high degrees of newness are fraught with greater risk and/or greater resource needs. Respondents pay considerable weight on alignment with the knowledge and skills they already posses in choosing particular venture idea. The initial resource position of entrepreneurs is not equally important. Even though expected potential financial gain gives substantial utility, result indicate that it is not a dominant factor for the attractiveness of venture idea.

“Entrepreneurial management” as a strategic choice in firm behavior : linking it with performance

Establishing the core principals of “entrepreneurial management” within an organization describes a certain strategic choice that affects a company in six dimensions, according to Stevenson (1983). Our aim is to empirically measure entrepreneurial management (it’s existence and degree) and to link this measured strategic choice (for or against) entrepreneurial management with firm performance. Our argument here is that companies that follow core principals of entrepreneurial management should outperform other more administrative firms in certain measures of strategic performance. This paper builds on an empirical investigation published by Brown, Davidson & Wiklund (2001), who have developed and tested a reliable measurement instrument for Stevenson’s definition of “entrepreneurial management” (Stevenson 1983, Stevenson & Jarillo 1990). In the first part of our paper we aim to replicate and to some extent improve this study. In the second part we link the measured degree of “entrepreneurial management” with firm performance. To our knowledge, even so Stevenson’s definition of entrepreneurial management is commonly acknowledged and Brown et al. (2001) developed a reliable instrument to empirically capture this behavioral approach to management, the construct of entrepreneurial management never before has been linked to firm performance in an empirical study. Since most papers on corporate entrepreneurship and firm performance are based on Covin & Slevin’s (1991) or Miller’s (1983) concept of entrepreneurial orientation, we contribute to the literature on corporate entrepreneurship in a novel way, given the fact that the entrepreneurial management dimensions measured in our study can theoretically and empirically be clearly distinguished from the construct of entrepreneurial orientation as defined by Covin & Selvin (1991).

A closer look at business planning : early stage outcome effects of how it is prepared and used

The widespread use of business planning in combination with the mixed theoretical and empirical support for its effect suggest research is needed that takes a deeper into the quality of plans and how they are used. In this study we longitudinally examine use vs. non-use; degree of formalizations; revision of plans, and moderation of planning effects by product novelty,among nascent firms. We relate these to attainment of profitability after 12 months. We find that business planning is negatively related to profitability, but that revising plans is positively related to profitability. Both these effects are stronger under conditions of high product novelty.

The feasibility of vibration analysis as a technique to detect osseointegration of transfemoral implants

One of the main causes of above knee or transfemoral amputation (TFA) in the developed world is trauma to the limb. The number of people undergoing TFA due to limb trauma, particularly due to war injuries, has been increasing. Typically the trauma amputee population, including war-related amputees, are otherwise healthy, active and desire to return to employment and their usual lifestyle. Consequently there is a growing need to restore long-term mobility and limb function to this population. Traditionally transfemoral amputees are provided with an artificial or prosthetic leg that consists of a fabricated socket, knee joint mechanism and a prosthetic foot. Amputees have reported several problems related to the socket of their prosthetic limb. These include pain in the residual limb, poor socket fit, discomfort and poor mobility. Removing the socket from the prosthetic limb could eliminate or reduce these problems. A solution to this is the direct attachment of the prosthesis to the residual bone (femur) inside the residual limb. This technique has been used on a small population of transfemoral amputees since 1990. A threaded titanium implant is screwed in to the shaft of the femur and a second component connects between the implant and the prosthesis. A period of time is required to allow the implant to become fully attached to the bone, called osseointegration (OI), and be able to withstand applied load; then the prosthesis can be attached. The advantages of transfemoral osseointegration (TFOI) over conventional prosthetic sockets include better hip mobility, sitting comfort and prosthetic retention and fewer skin problems on the residual limb. However, due to the length of time required for OI to progress and to complete the rehabilitation exercises, it can take up to twelve months after implant insertion for an amputee to be able to load bear and to walk unaided. The long rehabilitation time is a significant disadvantage of TFOI and may be impeding the wider adoption of the technique. There is a need for a non-invasive method of assessing the degree of osseointegration between the bone and the implant. If such a method was capable of determining the progression of TFOI and assessing when the implant was able to withstand physiological load it could reduce the overall rehabilitation time. Vibration analysis has been suggested as a potential technique: it is a non destructive method of assessing the dynamic properties of a structure. Changes in the physical properties of a structure can be identified from changes in its dynamic properties. Consequently vibration analysis, both experimental and computational, has been used to assess bone fracture healing, prosthetic hip loosening and dental implant OI with varying degrees of success. More recently experimental vibration analysis has been used in TFOI. However further work is needed to assess the potential of the technique and fully characterise the femur-implant system. The overall aim of this study was to develop physical and computational models of the TFOI femur-implant system and use these models to investigate the feasibility of vibration analysis to detect the process of OI. Femur-implant physical models were developed and manufactured using synthetic materials to represent four key stages of OI development (identified from a physiological model), simulated using different interface conditions between the implant and femur. Experimental vibration analysis (modal analysis) was then conducted using the physical models. The femur-implant models, representing stage one to stage four of OI development, were excited and the modal parameters obtained over the range 0-5kHz. The results indicated the technique had limited capability in distinguishing between different interface conditions. The fundamental bending mode did not alter with interfacial changes. However higher modes were able to track chronological changes in interface condition by the change in natural frequency, although no one modal parameter could uniquely distinguish between each interface condition. The importance of the model boundary condition (how the model is constrained) was the key finding; variations in the boundary condition altered the modal parameters obtained. Therefore the boundary conditions need to be held constant between tests in order for the detected modal parameter changes to be attributed to interface condition changes. A three dimensional Finite Element (FE) model of the femur-implant model was then developed and used to explore the sensitivity of the modal parameters to more subtle interfacial and boundary condition changes. The FE model was created using the synthetic femur geometry and an approximation of the implant geometry. The natural frequencies of the FE model were found to match the experimental frequencies within 20% and the FE and experimental mode shapes were similar. Therefore the FE model was shown to successfully capture the dynamic response of the physical system. As was found with the experimental modal analysis, the fundamental bending mode of the FE model did not alter due to changes in interface elastic modulus. Axial and torsional modes were identified by the FE model that were not detected experimentally; the torsional mode exhibited the largest frequency change due to interfacial changes (103% between the lower and upper limits of the interface modulus range). Therefore the FE model provided additional information on the dynamic response of the system and was complementary to the experimental model. The small changes in natural frequency over a large range of interface region elastic moduli indicated the method may only be able to distinguish between early and late OI progression. The boundary conditions applied to the FE model influenced the modal parameters to a far greater extent than the interface condition variations. Therefore the FE model, as well as the experimental modal analysis, indicated that the boundary conditions need to be held constant between tests in order for the detected changes in modal parameters to be attributed to interface condition changes alone. The results of this study suggest that in a clinical setting it is unlikely that the in vivo boundary conditions of the amputated femur could be adequately controlled or replicated over time and consequently it is unlikely that any longitudinal change in frequency detected by the modal analysis technique could be attributed exclusively to changes at the femur-implant interface. Therefore further development of the modal analysis technique would require significant consideration of the clinical boundary conditions and investigation of modes other than the bending modes.

Changing perceptions of preservice teachers : innovations in middle schooling teacher education

For the past twenty years, the disengagement of early adolescents has been the focus of much of the literature related to middle schooling. In response, some universities in Australia have introduced teacher education programs that focus upon graduating specialised middle schooling teachers. Constructing such programs is at the centre of much debate and discussion, however, it is advocated that positive futures for early adolescents can be enhanced through quality middle schooling teacher education programs (Education Queensland, 2004). At a Queensland university campus, middle schooling elective units were introduced as part of the Bachelor of Education (primary) degree. The design of the units was to support preservice teachers to gain the theoretical and pedagogical knowledge to engage and promote early adolescent learning. An innovative approach to the delivery of the units was promoted by a partnership agreement between local schools and the campus. The partnership allowed preservice teachers to combine university classes with opportunities to visit exemplary classrooms to observe, participate and reflect upon middle school teaching practices. The aim of this study was to explore and describe the 38 first-year preservice teachers’ perceptions of their first middle schooling elective unit and to ascertain whether the combination of university classes and school-based experiences assisted their development of middle schooling concepts and approaches. Data were gathered using pre-test and post-test questionnaires combined with guided written reflections to record their views before, after and during the unit delivery. Results indicated that initially 34 preservice teachers had little understanding of middle schooling concepts and pedagogical practices, however, 11 participants recognised that bullying and peer pressure were issues experienced by early adolescents. The collation of the written reflections supported the combined delivery of the middle years unit further supporting the inclusion of school experiences with university delivered units.

Embracing diversity : empowering preservice teachers for teaching gifted and talented students

This study investigated preservice teachers’ perceptions for teaching and sustaining gifted and talented students while developing, modifying and implementing activities to cater for the diverse learner. Participants were surveyed at the end of a gifted and talented education program on their perceptions to differentiate the curriculum for meeting the needs of the student (n=22). SPSS data analysis with the five-part Likert scale indicated these preservice teachers agreed or strongly agreed they had developed skills in curriculum planning (91%) with well-designed activities (96%), and lesson preparation skills (96%). They also claimed they were enthusiastic for teaching (91%) and understanding of school practices and policies (96%). However, 46% agreed they had knowledge of syllabus documents with 50% claiming an ability to provide written feedback on student’s learning. Furthermore, nearly two-thirds suggested they had educational language from the syllabus and effective student management strategies. Preservice teachers require more direction on how to cater for diversity and begin creating sustainable societies by building knowledge from direct GAT experiences. Designing diagnostic surveys associated with university coursework can be used to determine further development for specific preservice teacher development in GAT education. Preservice teachers need to create opportunities for students to realise their potential by involving cognitive challenges through a differentiated curriculum. Differentiation requires modification of four primary areas of curriculum development (Maker, 1975) content (what we teach), process (how we teach), product (what we expect the students to do or show) and learning environment (where we teach/our class culture). Ashman and Elkins (2009) and Glasson (2008) emphasise the need for preservice teachers, teachers and other professionals to be able to identify what gifted and talented (GAT) students know and how they learn in relation to effective teaching. Glasson (2008) recommends that educators keep up to date with practices in pedagogy, support, monitoring and profiling of GAT students to create an environment conducive to achieving. Oral feedback is one method to communicate to learners about their progress but has advantages and disadvantages for some students. Oral feedback provides immediate information to the student on progress and performance (Ashman & Elkins, 2009). However, preservice teachers must have clear understandings of key concepts to assist the GAT student. Implementing teaching strategies to engage innovate and extend students is valuable to the preservice teacher in focusing on GAT student learning in the classroom (Killen, 2007). Practical teaching strategies (Harris & Hemming, 2008; Tomlinson et al., 1994) facilitate diverse ways for assisting GAT students to achieve learning outcomes. Such strategies include activities to enhance creativity, co-operative learning and problem-solving activities (Chessman, 2005; NSW Department of Education and Training, 2004; Taylor & Milton, 2006) for GAT students to develop a sense of identity, belonging and self esteem towards becoming an autonomous learner. Preservice teachers need to understand that GAT students learn in a different way and therefore should be assessed differently. Assessment can be through diverse options to demonstrate the student’s competence, demonstrate their understanding of the material in a way that highlights their natural abilities (Glasson, 2008; Mack, 2008). Preservice teachers often are unprepared to assess students understanding but this may be overcome with teacher education training promoting effective communication and collaboration in the classroom, including the provision of a variety of assessment strategies to improve teaching and learning (Callahan et al., 2003; Tomlinson et al., 1994). It is also critical that preservice teachers have enthusiasm for teaching to demonstrate inclusion, involvement and the excitement to communicate to GAT students in the learning process (Baum, 2002). Evaluating and reflecting on teaching practices must be part of a preservice teacher’s repertoire for GAT education. Evaluating teaching practices can assist to further enhance student learning (Mayer, 2008). Evaluation gauges the success or otherwise of specific activities and teaching in general (Mayer, 2008), and ensures that preservice teachers and teachers are well prepared and maintain their commitment to their students and the community. Long and Harris (1999) advocate that reflective practices assist teachers in creating improvements in educational practices. Reflective practices help preservice teachers and teachers to improve their ability to pursue improved learning outcomes and professional growth (Long & Harris, 1999). Context This study is set at a small regional campus of a large university in Queensland. As a way to address departmental policies and the need to prepare preservice teachers for engaging a diverse range of learners (see Queensland College of Teachers, Professional Standards for Teachers, 2006), preservice teachers at this campus completed four elective units within their Bachelor of Education (primary) degree. The electives include: 1. Middle years students and schools 2. Teaching strategies for engaging learners 3. Teaching students with learning difficulties, and 4. Middle-years curriculum, pedagogy and assessment. In the university-based component of this unit, preservice teachers engaged in learning about middle years students and schools, and gained knowledge of government policies pertaining to GAT students. Further explored within in this unit was the importance of: collaboration between teachers, parents/carers and school personnel in supporting middle years GAT students; incorporating challenging learning experiences that promoted higher order thinking and problem solving skills; real world learning experiences for students and; the alignment and design of curriculum, pedagogy and assessment that is relevant to the students development, interests and needs. The participants were third-year Bachelor of Education (primary) preservice teachers who were completing an elective unit as part of the middle years of schooling learning with a focus on GAT students. They were assigned one student from a local school. In the six subsequent ninety minute weekly lessons, the preservice teachers were responsible for designing learning activities that would engage and extend the GAT students. Furthermore, preservice teachers made decisions about suitable pedagogical approaches and designed the assessment task to align with the curriculum and the developmental needs of their middle years GAT student. This research aims to describe preservice teachers’ perceptions of their education for teaching gifted and talented students.

The record producer as nexus : creative inspiration, technology and the recording industry

What is a record producer? There is a degree of mystery and uncertainty about just what goes on behind the studio door. Some producers are seen as Svengali-like figures manipulating artists into mass consumer product. Producers are sometimes seen as mere technicians whose job is simply to set up a few microphones and press the record button. Close examination of the recording process will show how far this is from a complete picture. Artists are special—they come with an inspiration, and a talent, but also with a variety of complications, and in many ways a recording studio can seem the least likely place for creative expression and for an affective performance to happen. The task of the record producer is to engage with these artists and their songs and turn these potentials into form through the technology of the recording studio. The purpose of the exercise is to disseminate this fixed form to an imagined audience—generally in the hope that this audience will prove to be real. Finding an audience is the role of the record company. A record producer must also engage with the commercial expectations of the interests that underwrite a recording. This dissertation considers three fields of interest in the recording process: the performer and the song; the technology of the recording context; and the commercial ambitions of the record company—and positions the record producer as a nexus at the interface of all three. The author reports his structured recollection of five recordings, with three different artists, that all achieved substantial commercial success. The processes are considered from the author’s perspective as the record producer, and from inception of the project to completion of the recorded work. What were the processes of engagement? Do the actions reported conform to the template of nexus? This dissertation proposes that in all recordings the function of producer/nexus is present and necessary—it exists in the interaction of the artistry and the technology. The art of record production is to engage with these artists and the songs they bring and turn these potentials into form.

Impacts and adaptation response of infrastructure and communities to heatwaves : the southern Australian experience of 2009

From 27 January to 8 February during the summer of 2009, southern Australia experienced one of the nation‘s most severe heatwaves. Governments, councils, utilities, hospitals and emergency response organisations and the community were largely underprepared for an extreme event of this magnitude. This case study targets the experience and challenges faced by decision makers and policy makers and focuses on the major metropolitan areas affected by the heatwave — Melbourne and Adelaide. The study examines the 2009 heatwave‘s characteristics; its impacts (on human health, infrastructure and human services); the degree of adaptive capacity (vulnerability and resilience) of various sectors, communities and individuals; and the reactive responses of government and emergency and associated services and their effectiveness. Barriers and challenges to adaptation and increasing resilience are also identified and further areas for research are suggested. This study does not include details of the heatwave‘s effects beyond Victoria and South Australia, or its economic impacts, or of Victoria‘s 'Black Saturday‘ bushfires.

Impact of zooming and enhancing Region of Interests for optimizing user experience on mobile sports video

In mobile videos, small viewing size and bitrate limitation often cause unpleasant viewing experiences, which is particularly important for fast-moving sports videos. For optimizing the overall user experience of viewing sports videos on mobile phones, this paper explores the benefits of emphasizing Region of Interest (ROI) by 1) zooming in and 2) enhancing the quality. The main goal is to measure the effectiveness of these two approaches and determine which one is more effective. To obtain a more comprehensive understanding of the overall user experience, the study considers user’s interest in video content and user’s acceptance of the perceived video quality, and compares the user experience in sports videos with other content types such as talk shows. The results from a user study with 40 subjects demonstrate that zooming and ROI-enhancement are both effective in improving the overall user experience with talk show and mid-shot soccer videos. However, for the full-shot scenes in soccer videos, only zooming is effective while ROI-enhancement has a negative effect. Moreover, user’s interest in video content directly affects not only the user experience and the acceptance of video quality, but also the effect of content type on the user experience. Finally, the overall user experience is closely related to the degree of the acceptance of video quality and the degree of the interest in video content. This study is valuable in exploiting effective approaches to improve user experience, especially in mobile sports video streaming contexts, whereby the available bandwidth is usually low or limited. It also provides further understanding of the influencing factors of user experience.

Keeping in constant touch : the predictors of young Australians��� mobile phone involvement

Little is known about the psychological underpinnings of young people’s mobile phone behaviour. In the present research, 292 young Australians, aged 16–24 years, completed an online survey assessing the effects of self-identity, in-group norm, the need to belong, and self-esteem on their frequency of mobile phone use and mobile phone involvement, conceptualised as people’s degree of cognitive and behavioural association with their mobile phone. Structural equation modelling revealed that age (younger) and self-identity significantly predicted the frequency of mobile phone use. In contrast, age (younger), gender (female), self-identity and in-group norm predicted young people’s mobile phone involvement. Neither self-esteem nor the need to belong significantly predicted mobile phone behaviour. The present study contributes to our understanding of this phenomenon and provides an indication of the characteristics of young people who may become highly involved with their mobile phone.

A model for integrating clinical care and basic science research, and pitfalls of performing complex research projects for addressing a clinical challenge

The collaboration of clinicians with basic science researchers is crucial for addressing clinically relevant research questions. In order to initiate such mutually beneficial relationships, we propose a model where early career clinicians spend a designated time embedded in established basic science research groups, in order to pursue a postgraduate qualification. During this time, clinicians become integral members of the research team, fostering long term relationships and opening up opportunities for continuing collaboration. However, for these collaborations to be successful there are pitfalls to be avoided. Limited time and funding can lead to attempts to answer clinical challenges with highly complex research projects characterised by a large number of "clinical" factors being introduced in the hope that the research outcomes will be more clinically relevant. As a result, the complexity of such studies and variability of its outcomes may lead to difficulties in drawing scientifically justified and clinically useful conclusions. Consequently, we stress that it is the basic science researcher and the clinician's obligation to be mindful of the limitations and challenges of such multi-factorial research projects. A systematic step-by-step approach to address clinical research questions with limited, but highly targeted and well defined research projects provides the solid foundation which may lead to the development of a longer term research program for addressing more challenging clinical problems. Ultimately, we believe that it is such models, encouraging the vital collaboration between clinicians and researchers for the work on targeted, well defined research projects, which will result in answers to the important clinical challenges of today.

Researching professionals and online social networking : toward a professional doctorate

The professional doctorate is a degree that is specifically designed for professionals investigating real world problems and relevant issues for a profession, industry and/ or the community. The study on which this paper is based sought to track the scholarly skill development of a cohort of professional doctoral students who commenced their course in January 2008 at an Australian University. Via an initial survey and two focus groups held six months apart, the study aimed to determine if there had been any qualitative shifts in students’ understandings, expectations and perceptions regarding this developing knowledge and skills. Three key findings has emerged from this study were: (i) the appropriateness of using a blended learning approach for this doctoral cohort; (ii) the challenges of using wikis as an online technology of creating communities of practice: and (iii) that the transition from student to scholar is a process that is unlikely to be achieved in a short time frame.