A Hydrogeologic Evaluation of the Waterloo Area in the Upper Jefferson River Valley, Montana

The Upper Jefferson River is one of the most dewatered rivers in Montana. The river exists in an intermontane basin filled with sediment transported from the Highland Mountains to the west, the Tobacco Root Mountains to the east, and the Jefferson River from the south. The Upper Jefferson River Valley is highly dependent on the Jefferson River as the main industry in the valley is agriculture. A majority of the valley is irrigated and used to grow crops, and a good portion is also used for cattle grazing. The residents of the Upper Jefferson River Valley use the aquifer as the main source of potable water. The Jefferson River is also widely used for recreation. This study took place in the Waterloo area of the Upper Jefferson River Valley, approximately 20 miles south of Whitehall, Montana. The Waterloo area provides significant groundwater base flow to the Jefferson River, which is particularly important during the late irrigation season when the river is severely dewatered, and elevated surface-water temperatures occur, creating irrigation water shortages and poor trout habitat. This area contains two springfed streams, Willow Springs and Parson’s Slough, which discharge to the Jefferson River providing cool water in the late season as well as providing the most important trout spawning habitat in the valley. The area is bordered on both the east and west by irrigation ditches, and about 60% of the study area is irrigated. Tile drains were installed in the study area in close proximity to Parsons Slough causing some concern by neighboring residents. This study evaluated relationships between surface water, groundwater, and irrigation practices so that water managers and others can make informed management decisions about the Upper Jefferson River. Data was collected via a network of groundwater wells and surface-water sites. Additionally, water-quality samples were taken and an aquifer test was conducted to determine aquifer properties. The field data were analyzed and a groundwater budget was created in order to evaluate the aquifer. Results of the groundwater budget show that seepage from the irrigation canals and irrigation recharge have the biggest influence on recharge of the aquifer. There is significant groundwater outflow from the aquifer in the spring-fed streams as well as discharge to the Jefferson River. In comparing previous study results to this study’s results, there is no evidence of the water table decreasing due to irrigation practice changes or tile drain installation. However, given the amount of recharge irrigation practices contribute to the aquifer, if significant changes were made, they may affect groundwater elevations. Also lining the irrigation ditches would have a significant impact on the aquifer, as the amount of seepage would be greatly reduced.

FAULT MORPHOLOGY WITHIN THE SOUTHERN KENYAN PORTION OF THE EAST AFRICAN RIFT VALLEY

Faults form quickly, geologically speaking, with sharp, crisp step-like profiles. Logic dictates that erosion wears away this "sharpness" or angularity creating more rounded features. As erosion occurs, debris accumulates at the base of the scarp slope. The stable end point of this process is when the scarp slope approaches an ideal sigmoid shape. This theory of fault end process, in combination with a new method developed in this report for fault profile delineation, has the potential to enable observation and categorization of fault profiles over large, diverse swaths of fault formation-- in remote areas such as the Southern Kenyan Rift Valley. This up-to date method uses remote sensing data and the digitizer tool in Global Mapper to create shape files of fault segments. This method can provide further evidence to support the notion that sigmoidal- shaped profiles represent a natural endpoint of the erosional process of fault scarps. Over time, faults of many different ages would exist in this similar shape over a wide region. However, keeping in mind that other processes can be at work on scarps-- most notably drainage patterns, when anomalies in profiles are observed, reactivation in some form possibly has occurred.

HOG CHAINS AND MARK TWAINS: A STUDY OF LABOR HISTORY, ARCHAEOLOGY, AND INDUSTRIAL ETHNOGRAPHY OF THE STEAMBOAT ERA OF THE MONONGAHELA VALLEY 1811-1950

This dissertation examines a unique working class in the United States, the men and women who worked on the steamboats from the Industrial Revolution until the demise of steam-powered boats in the mid-20th century. The steamboat was the beginning of a technological system that was developed in America and used in such great numbers that it made the rapid population of the Trans-Appalachian West possible. The steamboat was forever romanticized by images of the antebellum South or the quick wit of Samuel Clemens and his sentimental book, Life on the Mississippi. The imagination swirls with thoughts of boats, bleach white, slowly churning the calm waters of some Spanish moss covered river. The reality of the boats and the experience of those who worked on them has been lost in this nostalgic vision. This research details the history of the western steamboat in the Monongahela Valley, the birthplace of the commercial steamboat industry. The first part of this dissertation examines the literature of authors in the field of labor history and Industrial Archaeology to place this work into the larger context of published literature. The second builds a framework for understanding the various eras that the steamboat went through both in terms of technological change, but also the change the workers experienced as their identity as a working class was being shaped. The third part details the excavations of two steamboat captains houses, those of Captain James Gormley and Captain Michael A. Cox. Both men represented a time in which the steamboat was in an era of transition. Excavations at their homes yield clues to their class status and how integrated they were in the local community. The fourth part of this study documents the oral histories of steamboat workers, both men and women, and their experience on the boats and on the river. Their rapidly declining population of those who lived and worked on the boats gives urgency for their lives to be documented. Finally, this study concludes with a synthesis of how worker identity solidified in the face of technological, socio-economic, and ideological change especially during their push for unionization and the introduction of the diesel towboat.

Splitting of a prevalent Mycobacterium bovis spoligotype by variable-number tandem-repeat typing reveals high heterogeneity in an evolving clonal group

Mycobacterium bovis populations in countries with persistent bovine tuberculosis usually show a prevalent spoligotype with a wide geographical distribution. This study applied mycobacterial interspersed repetitive-unit-variable-number tandem-repeat (MIRU-VNTR) typing to a random panel of 115 M. bovis isolates that are representative of the most frequent spoligotype in the Iberian Peninsula, SB0121. VNTR typing targeted nine loci: ETR-A (alias VNTR2165), ETR-B (VNTR2461), ETR-D (MIRU4, VNTR580), ETR-E (MIRU31, VNTR3192), MIRU26 (VNTR2996), QUB11a (VNTR2163a), QUB11b (VNTR2163b), QUB26 (VNTR4052), and QUB3232 (VNTR3232). We found a high degree of diversity among the studied isolates (discriminatory index [D] = 0.9856), which were split into 65 different MIRU-VNTR types. An alternative short-format MIRU-VNTR typing targeting only the four loci with the highest variability values was found to offer an equivalent discriminatory index. Minimum spanning trees using the MIRU-VNTR data showed the hypothetical evolution of an apparent clonal group. MIRU-VNTR analysis was also applied to the isolates of 176 animals from 15 farms infected by M. bovis SB0121; in 10 farms, the analysis revealed the coexistence of two to five different MIRU types differing in one to six loci, which highlights the frequency of undetected heterogeneity.

Design principles for maximizing photovoltage in metal-oxide-protected water-splitting photoanodes

Metal oxide protection layers for photoanodes may enable the development of large-scale solar fuel and solar chemical synthesis, but the poor photovoltages often reported so far will severely limit their performance. Here we report a novel observation of photovoltage loss associated with a charge extraction barrier imposed by the protection layer, and, by eliminating it, achieve photovoltages as high as 630mV, the maximum reported so far for water-splitting silicon photoanodes. The loss mechanism is systematically probed in metal-insulator-semiconductor Schottky junction cells compared to buried junction p(+) n cells, revealing the need to maintain a characteristic hole density at the semiconductor/insulator interface. A leaky-capacitor model related to the dielectric properties of the protective oxide explains this loss, achieving excellent agreement with the data. From these findings, we formulate design principles for simultaneous optimization of built-in field, interface quality, and hole extraction to maximize the photovoltage of oxide-protected water-splitting anodes.

Engineering interfacial silicon dioxide for improved metal-insulator-semiconductor silicon photoanode water splitting performance

Silicon photoanodes protected by atomic layer deposited (ALD) TiO2 show promise as components of water splitting devices that may enable the large-scale production of solar fuels and chemicals. Minimizing the resistance of the oxide corrosion protection layer is essential for fabricating efficient devices with good fill factor. Recent literature reports have shown that the interfacial SiO2 layer, interposed between the protective ALD-TiO2 and the Si anode, acts as a tunnel oxide that limits hole conduction from the photoabsorbing substrate to the surface oxygen evolution catalyst. Herein, we report a significant reduction of bilayer resistance, achieved by forming stable, ultrathin (<1.3 nm) SiO2 layers, allowing fabrication of water splitting photoanodes with hole conductances near the maximum achievable with the given catalyst and Si substrate. Three methods for controlling the SiO2 interlayer thickness on the Si(100) surface for ALD-TiO2 protected anodes were employed: (1) TiO2 deposition directly on an HF-etched Si(100) surface, (2) TiO2 deposition after SiO2 atomic layer deposition on an HF-etched Si(100) surface, and (3) oxygen scavenging, post-TiO2 deposition to decompose the SiO2 layer using a Ti overlayer. Each of these methods provides a progressively superior means of reliably thinning the interfacial SiO2 layer, enabling the fabrication of efficient and stable water oxidation silicon anodes.

La innovación dentro del entorno de Silicon Valley

En este artículo se presentan los resultados de la visita a las empresas ubicadas en Silicon Valley, cuna de la innovación, con el fin de obtener un entendimiento integral del funcionamiento y factores claves de éxito de las starups y organizaciones que conforman este conglomerado empresarial.

Efficacy and economic returns from various insecticide combinations applied for tobacco budworm control in the Brazos River Valley.

A field efficacy evaluation revealed significant differences in efficacy among a few of the numerous insecticides or combinations of insecticides applied for Heliothis spp. control. An increasing proportion of made up this field population during the test period. Partial budgeting revealed that the net returns from applying any treatment were directly proportional to the resulting yield obtained from that treatment.

Planting times and spacing of carrot crops in the São Francisco Valley, Pernambuco state, Brazil.

Climate variations over the year and plant density tend to strongly affect the agronomic performance of carrot crops. Thus, the objective of this work was to evaluate the performance of the cultivar Brasilia in crops under mild (winter) and high (summer) temperatures. An experiment was conducted from May 2011 to February 2012, using a randomized block design and treatments arranged in split plot, with three replications. The plots consisted of planting seasons (winter and summer) and the subplots of plant spacing (4, 6, 8 and 10 cm). The height of plants presented a linear decrease, from 53.4 to 51.0 cm, with an increase in spacing in summer planting, while in winter the greatest height (50.7 cm) was obtained with spacing of 8.0 cm between plants. The lowest commercial yields were found in summer crops and with the widest spacing between plants. The smallest spacing between plants (4 cm) had yields of 45.9 Mg ha -1in summer and of 63.1 Mg ha-1 in winter crops. The winter planting had higher fresh root weight (89.9 g root - 1 ) compared to the summer (81.4 g root - 1 ), reaching higher weight with increasing plant spacing. Higher yields are achieved with plant spacing of 4 cm during winter. The carrot can be grown throughout the year in the Submiddle of the São Francisco Valley.

Nitrogen and potassium fertilization on 'Caipira' and 'BRS Princesa' bananas in the Ribeira Valley.

2016

Soil management systems for sustainable melon cropping in the Submedian of the São Francisco Valley.

Changes in soils management systems, including the application of green manure, are able to increase crop productivity. The aim of this study was to propose a soil management system with the use of green manure to improve the nutritional status and melon productivity in the submedian of the São Francisco Valley. The experiment was installed in Typic Plinthustalf and conducted in split plot. There were two soil tillage systems, tillage (T) and no tillage (NT), and three types of green manure (two vegetal cocktails: VC1- 75% legumes (L) + 25% non-legumes (NL); VC2- 25% L+ 75% NL and spontaneous vegetation (SV)). The experimental design was a randomised block with four replications. Fourteen species of legumes, grasses and oilseeds were used for the composition of the plant cocktails. We evaluated production of the dry shoot and root biomass and carbon and nutrient accumulation by green manures and melon plant. Data were subjected to analysis of variance and the treatment means were compared by Tukey´s test (P<0.05). Shoot biomass production and carbon and nutrient accumulation were higher in plant mixtures compared to spontaneous vegetation. The root system of the plant cocktails added larger quantities of biomass and nutrients to the soil to a depth of 0.60 m when compared to the spontaneous vegetation. The cultivation of plant cocktails with soil tillage, regardless of their composition, is a viable alternative for adding biomass and nutrients to the soil in melon crops in semi-arid conditions, providing productivity increases.

Mini tomato cultivars for the Sub-Mid São Francisco Valley, Brazil.

In this context, the objective of this work was to evaluate the performance of mini tomato cultivars of determinate growth habit, in two crop seasons in the conditions of the Sub-Mid São Francisco Valley, Brazil.

Creolo beans production systems in Juruá valley, Acre, Brazilian Amazon.

The Juruá valley mesoregion is recognized for its diversity of cultivars of common beans and cowpea and is an important center for on farm bean conservation in Brazil. However, there is little information about production systems of Creoles cultivars and, in this approach, the study aimed to identify the production centers and to gather information about beans production systems. Thirty eight farmers and five merchants were interviewed using semi-structured questionnaries. Juruá valley farmers use three beans production systems: "beach farming", "slash burn system" and "stuffy farming". The systems use family labor with low dependence on external inputs, two classified as itinerant. The study identified two beans production centers: Alto Juruá extractive reserve and Santa Luzia directed settlement project.

Sensory profiles of tropical wines produced in the São Francisco River Valley (Northeast Brazil).

2011