On the interaction of bovine serum albumin with ionic surfactants: Temperature induced EPR changes of a maleimide nitroxide reflect local protein dynamics and probe solvent accessibility

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Sistemas microemulsionados como carreador lipídico para fármacos insolúveis

Several pharmaceutical products have been developed in recent years aiming to enhance the treatment of diseases by increasing the effectiveness of drugs. Many of these new products are based on new drug delivery systems. Among these, microemulsions, which were first studied in 1943 by Hoar and Schulman, is of great interest. Microemulsion can be defined as a thermodynamically stable, isotropic, translucent and transparent system of two immiscible liquids stabilized by a surfactant film located in the oil / water interface. The aim os this work was the incorporation of Amphotericin B and Simvasatin to a microemulsion system and analyzes its physicochemical properties and their therapeutical activity when incorporated into this system. Some very promising results were achieved as the reduction of the toxicity and maintenance of the efficacy of the Amphotericin B incorpored into a microemulsion, which was demonstrated in the in vitro pharmacotoxicological study. As for the incorporation of Simvastatin in microemulsion, it was observed a significant improvement in the potential antiinflammatory and anti-infective properties when the system was use to treat infected wounds (simvastatin pleiotropic effects). Therefore, it can be concluded that the incorporation of these drugs into microemulsion system reveal the potential of microemulsions as a promising and novel dosage form, qualifying them for future trials in order to make them available in the pharmaceutical market

Nanotechnological delivery systems for the oral administration of active molecules: Polymeric microparticles and microemulsions applied to anti-inflammatory and anti-infectious drugs

This thesis was devoted to the development of innovative oral delivery systems for two different molecules. In the first part, microparticles (MPs) based on xylan and Eudragit® S- 100 were produced and used to encapsulate 5-aminosalicylic acid for colon delivery. Xylan was extracted from corn cobs and characterized in terms of its physicochemical, rheological and toxicological properties. The polymeric MPs were prepared by interfacial cross-linking polymerization and spray-drying and characterized for their morphology, mean size and distribution, thermal stability, crystallinity, entrapment efficiency and in vitro drug release. MPs with suitable physical characteristics and satisfactory yields were prepared by both methods, although the spray-dried systems showed higher thermal stability. In general, spraydried MPs would be preferable systems due to their thermal stability and absence of toxic agents used in their preparation. However, drug loading and release need to be optimized. In the second part of this thesis, oil-in-water microemulsions (O/W MEs) based on mediumchain triglycerides were formulated as drug carriers and solubility enhancers for amphotericin B (AmB). Phase diagrams were constructed using surfactant blends with hydrophiliclipophilic balance values between 9.7 and 14.4. The drug-free and drug-loaded MEs presented spherical non-aggregated droplets around 80 and 120 nm, respectively, and a low polydispersity index. The incorporation of AmB was high and depended on the volume fraction of the disperse phase. These MEs did not reduce the viability of J774.A1 macrophage-like cells for concentrations up to 25 μg/mL of AmB. Therefore, O/W MEs based on propylene glycol esters of caprylic acid may be considered as suitable delivery systems for AmB

Biosurfactants production by yeasts using soybean oil and glycerol as low cost substrate

Biosurfactants are bioactive agents that can be produced by many different microorganisms. Among those, special attention is given to yeasts, since they can produce many types of biosurfactants in large scale, using several kinds of substrates, justifying its use for industrial production of those products. For this production to be economically viable, the use of residual carbon sources is recommended. The present study isolated yeasts from soil contaminated with petroleum oil hydrocarbons and assessed their capacity for producing biosurfactants in low cost substrates. From a microbial consortium enriched, seven yeasts were isolated, all showing potential for producing biosurfactants in soybean oil. The isolate LBPF 3, characterized as Candida antarctica, obtained the highest levels of production - with a final production of 13.86 g/L. The isolate LBPF 9, using glycerol carbon source, obtained the highest reduction in surface tension in the growth medium: approximately 43% of reduction after 24 hours of incubation. The products obtained by the isolates presented surfactant activity, which reduced water surface tension to values that varied from 34 mN/m, obtained from the product of isolates LBPF 3 and 16 LBPF 7 (respectively characterized as Candida antarctica and Candida albicans) to 43 mN/m from the isolate LPPF 9, using glycerol as substrate. The assessed isolates all showed potential for the production of biosurfactants in conventional sources of carbon as well as in agroindustrial residue, especially in glycerol.

Extração, caracterização e atividades biológicas de proteínas da espécie cnidoscolus urens (L.) Arthur

The extraction, chemical and structural characterization of a wide variety of compounds derived from plants has been a major source of bioactive molecules. Several proteases have been isolated in the plant kingdom, with numerous pharmacological and biotechnological applications. Among the proteases isolated from plants, are the fibrinogenolytic, with relevant application in the treatment of disorders in the coagulation cascade, in addition to potential use as a tool in clinical laboratories. In this study, in addition to evaluating the effects of the protein extract of Cnidoscolus urens (L.) Arthur (Euphorbiaceae) in the coagulation cascade also investigates the presence of antimicrobial activity and characterizes the proteolytic activity detected in this extract, aiming to determine their potential pharmacological and biotechnological application. In this way, crude protein extracts obtained from the leaves of C. urens in Tris-HCl 0.05M, NaCl 0.15M, pH 7.5, were precipitated in different concentrations of acetone, and assessed for the presence of proteolytic activity in azocaseína and fibrinogen. The most active fraction (F1.0) in these tests was chosen for assessment of biological activity and biochemical characterization. The Aα chain and Bβ of fibrinogen were completely cleaved at a concentration of 0.18 μg/μL of protein fraction in 4 minutes. Fibrinogenolytic activity presented total inhibition in the presence of E-64 and partial in the presence of EDTA. The fraction demonstrated coagulant activity in plasm and reduced the APTT, demonstrating acting on the factors coagulation of the intrinsic pathway and common, not exerting effects on the PT. Fibrinolytic activity on plasma clot was detected only in SDS-PAGE in high concentrations of fraction, and there were no defibrinating. Although several proteases isolated from plants and venomous animals are classically toxic, the fraction F1.0 of C. urens not expressed hemorrhagic nor hemolytic activities. Fraction F1.0 also showed no antimicrobial activity. In proteolytic activity on the azocasein, the optimal pH was 5.0 and optimum temperature of 60ºC. The enzyme activity has been shown to be sensitive to the presence of salts tested, with inhibition for all compounds. The surfactant triton did not influence the enzyme activity, but the tween-20 and SDS inhibited the activity. In the presence of reducing agents increase in enzyme activity occurred, a typical feature of enzymes belonging to the class of cysteine proteases. Several bands with proteolytic activity were detected in zymogram, in the region of high-molecular-weight, which were inhibited by E-64. In this study, we found that C. urens presents in its constitution cysteine proteases with fibrinogenolytic and procoagulant activity, which may be isolated, with potential application in treatment of bleeding disorders, thrombolytic and clinical laboratory

Germination and mycelial growth of Bipolaris euphorbiae Muchovej & Carvalho as influenced by herbicides and surfactants

Bipolaris euphorbiae Muchovej & Carvalho é um forte candidato para o controle de Euphorbia heterophylla L. (amendoim bravo). Este fungo pode ser aplicado em combinação com herbicidas para controlar um maior espectro de espécies daninhas. Para tanto, experimentos laboratoriais foram realizados para verificar a possibilidade da utilização de mistura de tanque de esporos de B. euphorbiae e herbicidas ou surfatantes recomendados para a cultura da soja. Crescimento micelial e germinação de conídios foram avaliados em meio BDA acrescido dos herbicidas, nas concentrações recomendadas dos produtos comerciais, oxasulfuron (80 g/ha), glifosato (4 L/ha), bentazon (1.5 L/ha), fomesafen (1 L/ha), chlorimuron-ethyl (80 g/ha), lactofen (1 L/ha) e imazetaphyr (1 L/ha) e dos surfatantes Energic (2 ml/L), Aterbane (2,5 ml/L), Silwet L-77Ag (1 ml/L), Herbitensil (2 ml/L) e Natur L'óleo (10 ml/L). Diluições dos herbicidas de 50% e 25% foram avaliadas com um consumo de calda equivalente a 300 L/ha. Os surfatantes foram somente utilizados nas concentrações recomendadas. O crescimento micelial não foi afetado por bentazon e fomesafen e apenas levemente por oxasulfuron. Porém, glifosato, chlorimuron-ethyl, lactofen, Energic, Herbitensil, Silwet, e Aterbane o reduziram drasticamente. A redução observada com imazetaphyr foi intermediária e Natur L' óleo promoveu o crescimento micelial. Na presença dos surfatantes, observou-se que todos permitiram uma porcentagem de germinação equivalente àquela alcançada na presença de água. Energic e Herbitensil causaram um retardamento expressivo. Com Herbitensil, o processo germinativo iniciou somente aos 120 minutos. Com herbicidas, foi observado que somente na presença de glifosato e imazetaphyr a germinação dos conídios não seguiu a tendência observada com água, como ocorreu com os outros produtos testados.

Effects of plant densities and management of purple nutsedge on sugarcane yield and effect of growth stages and main way of herbicides contact and absorption on the control of tubers

Field experiments carried out with Cyperus rotundus L. at low (58-246), medium (318773), and high (675-1198 shoots/m(2)) densities showed sugarcane yield reductions of 13.5, 29.3, and 45.2%, respectively in relation to the control. In the second field experiment, the integration of a mechanic method with two sequences of plowing and disking operations in the dry season, and complementary applications of trifloxysulfuron-sodium + ametrine and sulfentrazone (rainy season) was studied. Average of the chain connected to original shoot showed 92, 95, and 65% of reduction with trifloxysulfuron-sodium + ametrine and surfactant, at the application stages early, preflowering, and full flowering, respectively.

Resposta de diferentes populações de Digitaria insularis ao herbicida glyphosate

Objetivou-se com estse trabalho avaliar o controle químico de diferentes populações de capim-amargoso (Digitaria insularis) pelo herbicida glyphosate por meio de curva de dose-resposta, além de propor tratamentos alternativos para as populações mais tolerantes. O delineamento experimental foi o de blocos ao acaso, com quatro repetições, em esquema fatorial 5 x 9. As sementes de capim-amargoso foram coletadas em cinco locais: área de produção de grãos da Fazenda de Ensino, Pesquisa e Produção da UNESP, Jaboticabal (SP); área de produção comercial de grãos, localizada nos municípios de Campo Florido-MG e Rio Verde-GO; pomar de laranja, localizado no município de Matão (SP); e área não agrícola sem histórico da aplicação de glyphosate (Jaboticabal-SP). O glyphosate (0D, 1/4D, 1/2D, D, 2D, 4D e 8D, em que D é a dose recomendada de 1,5 kg ha-1 de equivalente ácido) e as suas associações [glyphosate + fluazifop-p-butil (1,5 + 0,25 kg ha-1) e glyphosate (1,5 kg ha-1) com sequencial de diuron + paraquat (0,20 + 0,40 kg ha-1 + 0,2% de surfatante)] foram pulverizados em plantas de sete a oito perfilhos e altura média de 20 cm. As populações de capim-amargoso de Campo Florido e Rio Verde foram consideradas suscetíveis; as de Jaboticabal e Matão, tolerantes; e a da área não agrícola, de sensibilidade intermediária. A associação de glyphosate ao fluazifop ou a sua aplicação com sequencial de diuron + paraquat foram eficazes no controle das populações mais tolerantes de capim-amargoso.

Densidades e manejo químico da tiririca na produtividade de cana-de-açúcar

Em dois experimentos instalados e conduzidos a campo, foram avaliados os efeitos de densidades da tiririca e do seu controle químico na produtividade da cana-de-açúcar (var. SP 86042). No primeiro, três densidades foram estudadas: baixa (58 a 246), média (318 a 773) e alta (675 a 1.198 manifestações epígeas m-2). As reduções na produção foram de 13,5, 29,3 e 45,2% em relação à testemunha sem tiririca, respectivamente. No segundo experimento, foram testados os herbicidas sulfentrazone (0,8 kg ha-1), imazapic (0,105 kg ha-1) e flazasulfuron (0,150 kg ha-1), em pré-emergência, além da mistura de trifloxysulfuron-sodium + ametryne e Agral® (1,5 kg ha-1 + 0,20%), halosulfuron + Aterbane® (0,105 kg ha-1 + 0,25%) e flazasulfuron + Aterbane® (0,150 kg ha-1 + 0,25%), em pós emergência. Nesta área, a variação de densidade foi de 66 a 154 plantas m-2. Aos 90 dias após o plantio (DAP), as porcentagens de controle foram de 79,6; 70,6; 30,3; 84,8; 89,1; e 61,1%, respectivamente, para os herbicidas testados. A redução na produtividade foi de 16,4% entre as testemunhas infestada e capinada e de 11,9 e 6,0% onde se aplicou o flazasulfuron em pós e pré-emergência, respectivamente.

Morfometria de fibroblastos e fibrócitos durante o processo cicatricial na pele de coelhos da raça Nova Zelândia Branco tratados com calêndula

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Eficiência fotossintética de cultivares de cana-de-açúcar e de diferentes espécies de plantas daninhas após a aplicação do diuron

O objetivo deste trabalho foi avaliar a eficiência fotossintética, através da taxa de transporte de elétrons, de seis espécies de plantas daninhas e três cultivares de cana-de-açúcar após aplicação do herbicida diuron em pós-emergência inicial. Os cultivares utilizados (PO8862, SP80-3280 e RB83-5486) foram cortados em gemas e plantados em vasos com capacidade de 12 litros. A semeadura das seis espécies de plantas daninhas - Brachiaria decumbens, Digitaria horizontalis, Panicum maximum, Ipomoea grandifolia, Ipomoea hederifolia e Merremia cissoides - foi realizada para obter 25 plantas por vaso. A aplicação do herbicida diuron em pós-emergência inicial das plantas daninhas e dos cultivares de cana-de-açúcar foi realizada na dose de 3,0 kg ha-1, com adição de 0,2% de surfatante. As avaliações da taxa de transporte de elétrons no fotossistema (ETR) das plantas após a aplicação foram realizadas com auxílio de um fluorômetro portátil. Para as espécies de plantas daninhas, a ETR foi avaliada após intervalos de 2, 4, 24, 48, 72, 96 e 144 horas após a aplicação. Quanto aos cultivares de cana-de-açúcar, os intervalos avaliados foram de 2, 24, 48, 72, 120, 168 e 240 horas após a aplicação. de maneira geral, as reduções dos valores da ETR indicaram o nível de sensibilidade dos diferentes cultivares de cana-de-açúcar e das diferentes plantas daninhas ao diuron, e a intoxicação foi detectada antes ou mesmo sem a presença dos sintomas. A classificação da sensibilidade dos cultivares de cana-de-açúcar foi em ordem decrescente: PO-8862, SP80-3280 e RB83-5486; para as plantas daninhas, as espécies mais sensíveis foram M. cissoides, I. grandifolia e I. hederifolia, seguidas das gramíneas D. horizontalis, P. maximum e B. decumbens.

Controle químico de Typha subulata em dois estádios de desenvolvimento

O objetivo deste trabalho foi avaliar o controle químico de plantas de taboa em dois estádios fenológicos de desenvolvimento, ou seja, no estádio de pleno desenvolvimento vegetativo de 0,50 a 0,70 m e no estádio de florescimento. Os herbicidas e as doses utilizadas foram: imazapyr a 250, 500 e 750 g ha-1 com 0,5% de Aterbane; imazapyr a 250, 500 e 750 g ha-1 com 0,01% de Silwet; glyphosate a 3.360 e 4.320 g ha-1 com 0,5% de Aterbane; glyphosate a 3.360 e 4.320 g ha-1 com 0,01% de Silwet, além de uma testemunha sem aplicação de herbicidas. Os tratamentos foram instalados em delineamento experimental inteiramente casualizado, com quatro repetições. Os herbicidas foram aplicados com um pulverizador costal, munido de barra com duas pontas de jato plano XR Teejet 8002 S, a pressão constante de CO2 a 220 KPa, com consumo de calda de 200 L ha-1. As plantas de taboa foram mais sensíveis aos herbicidas quando no estádio de pleno desenvolvimento vegetativo de crescimento que no estádio de pleno florescimento, observando controle aceitável tanto com imazapyr como com glyphosate, exceto a dose de 250 g ha-1 de imazapyr com 0,5% de Aterbane. Neste mesmo estádio foi observado que o surfatante Aterbane foi menos efetivo que o Silwet, quando adicionado à menor dose do herbicida imazapyr.

Efeito de surfatantes e pontas de pulverização na deposição de calda de pulverização em plantas de grama-seda

O objetivo deste trabalho foi avaliar os efeitos de surfatantes e pontas de pulverização na deposição da calda de pulverização em plantas de Cynodon dactylon. Os tratamentos foram dispostos em um esquema fatorial 2 x 5, sendo duas pontas de pulverização (XR 11002 e TX-VK 8) e cinco caldas de pulverização (sem surfatante e com os surfatantes Aterbane e Silwet a 0,05% e 0,1%). As caldas foram preparadas utilizando-se o corante FDC-1 a 1.500 ppm como traçador. O delineamento experimental foi o inteiramente casualizado, com 10 repetições. As aplicações foram realizadas através de um pulverizador estacionário a pressão constante e com consumo de calda de 150 L ha-1. A ponta de pulverização do tipo jato cônico vazio proporcionou maior deposição nas folhas de grama-seda, quando comparada com a ponta do tipo jato plano, independentemente do adjuvante utilizado. As maiores deposições ocorreram nas doses de 0,1%, para ambos os surfatantes, quando utilizada a ponta de jato plano e para o Silwet a 0,05% pulverizado com a ponta de jato cônico. A deposição de calda nas folhas foi menor quando da não-adição de surfatante, independentemente da ponta de pulverização utilizada.

Desenvolvimento de sistemas a base de tensoativos para recuperação avançada de petróleo

Petroleum is a complex combination of various classes of hydrocarbons, with paraffinic, naphtenic and aromatic compounds being those more commonly found in its composition. The recent changes in the world scenario, the large reserves of heavy oils and also the lack of new discoveries of large petroleum fields are indications that, in the near future, the oil recovery by conventional methods will be limited. In order to increase the efficiency of the extraction process, enhanced recovery methods are cited in applications where conventional techniques have proven to be little effective. The injection of surfactant solutions as an enhanced recovery method is advantageous in that surfactants are able to reduce the interfacial tensions between water and oil, thus augmenting the displacement efficiency and, as a consequence, increasing the recovery factor. This work aims to investigate the effects of some parameters that influence the surfactant behavior in solution, namely the type of surfactant, the critical micelle concentration (CMC) and the surface and interface tensions between fluids. Seawater solutions containing the surfactants PAN, PHN and PJN have been prepared for presenting lower interfacial tensions with petroleum and higher stability under increasing temperature and salinity. They were examined in an experimental apparatus designed to assess the recovery factor. Botucatu (Brazil) sandstone plug samples were submitted to assay steps comprising saturation with seawater and petroleum, conventional recovery with seawater and enhanced recovery with surfactant solutions. The plugs had porosity between 29.6 and 32.0%, with average effective permeability to water of 83 mD. The PJN surfactant, at a concentration 1000% above CMC in water, had a higher recovery factor, causing the original oil in place to be recovered by an extra 20.97%, after conventional recovery with seawater

Remoção de óleo da água de produção por flotação em coluna utilizando tensoativos de origem vegetal

In the petroleum industry, water is always present in the reservoir formation together with petroleum and natural gas and this fact provokes the production of water with petroleum, resulting in a great environmental impact. Several methods can be applied for treatment of oily waters, such as: gravitational vases, granulated media filtration systems, flotation process, centrifugation process and the use of hydrocyclones, which can also be used in a combined way. However, the flotation process has showed a great efficiency as compared with other methods, because these methods do not remove great part of the emulsified oil. In this work was investigated the use of surfactants derived from vegetable oils, OSS and OGS, as collectors, using the flotation process in a glass column with a porous plate filter in its base for the input of the gaseous steam. For this purpose, oil/water emulsions were prepared using mechanical stirring, with concentrations around 300 ppm. The air flow rate was set at 700 cm3/min and the porous plate filter used for the generation of the air bubbles has pore size varying from 16 to 40 Pm. The column operated at constant volume (1500mL). A new methodology has been developed to collect the samples, where, instead of collecting the water phase, it was collected the oil phase removed by the process in the top of the flotation column. It has been observed that it is necessary to find an optimum surfactant concentration to achieve enhanced removal efficiency. Being for OSS 1.275 mmol/L and for OGS 0.840 mmol/L, with removal efficiencies of 93% and 99%, respectively, using synthetic solutions. For the produced water, the removal in these concentrations was 75% for OSS and 65% for OGS. It is possible to remove oil from water in a flotation process using surfactants of high HLB, fact that is against the own definition of HLB (Hydrophile-Lipophile Balance). The interfacial tension is an important factor in the oil removal process using a flotation process, because it has direct interference in the coalescence of the oil drops. The spreading of the oil of the air bubble should be considered in the process, and for the optimum surfactant concentrations it reached a maximum value. The removal kinetics for the flotation process using surfactants in the optimum concentration has been adjusted according to a first order model, for synthetic water as for the produced water.