Wadge Bank trawl fishery studies. Pt. 3. Nature and composition of the resident population

The demersal stock of the Wadge Bank is known to be made up of two major groups, namely the resident and migrant stocks (Sivalingam 1966b). It is necessary to analyse the two groups separately in order to correctly interpret the changes in relative abundance of the demersal fish stocks of the Bank. The object of this paper is to present the nature of the resident stock and discuss its changes in composition from 1945 to 1960. That of the migrant population will be presented later. The significance of this analysis has been discussed earlier (Sivalingam 1966a).

High bandwidth multimode fiber links using subcarrier multiplexing in vertical-cavity surface-emitting lasers

The usage of subcarrier multiplexing (SCM) techniques to allow link transmission in excess of the specified fiber bandwidth is described. A series of 200-Mbit/s channels with carrier frequencies of up to more than twenty times the 3-dB fiber bandwidth have been successfully used, the maximum being limited by the available electronics. To assess the transmission of the fiber, digitally modulated channels are placed on high frequency carrier signals and then used to modulate a vertical-cavity surface-emitting lasers (VCSEL).

Fluctuations in species composition of Penaeid prawns in estuaries

During a study of the distribution of penaeid prawns in Sri Lanka waters a difference was noticed in the species composition from one estuary to another. Moreover, a marked monthly fluctuation in the relative abundance of the different penaied species was also observed. This indicated migratory behaviour. In order to study this phenomenon in the different species of prawns, regular samples of prawns were collected from two estuaries on the south-west coast of Sri Lanka, namely at Moratuwa/Panadura and at Negombo. The investigation was spread over a period of three years from 1957-1959.

10-Gbit/s transmission over 300-m standard multimode fiber using multilevel coding and 2-channel WDM

A combination of multilevel coding schemes and simple two-channel wavelength division multiplexing (WDM) at 1300 and 1550 nm was used to transmit an aggregate of 10 Gbit/s over 300 m of multimode fiber that is typical of that employed in current Local Area Networks (LANs). It was shown that this technique could be a simple solution for achieving 10 Gigabit ethernet links over installed multimode fiber building backbones.

Subcarrier modulation for transmission of 1-Gbit/s channels over 500 m of 62.5-μm multimode fiber

The use of two different subcarriers at frequencies up to 5.5 GHz each transmitting 1 Gbit/s over 500 m of multimode fiber (MMF) is demonstrated. By transmitting the two subcarrier channels simultaneously alongside the baseband signal, an aggregate bit rate of 2.8 Gbit/s is possible.

The freshwater zooplankton of Sri Lanka, with a discussion of tropical freshwater zooplankton composition

Based on the study of over 500 zooplankton samples collected in Sri Lanka during 1965-1974, the species composition from different habitats is analysed. The zooplankton assemblage is typically tropical with relatively few species of Cladocera and Copepoda. The Rotifera include a large number of species of the genus Brachionus. The limnetic zooplankton resembles the pond zooplankton closely in that all the eurytopic species found in the different types of habitats, including ponds; also occur in the limnetic zooplankton. The large Cladocera belonging to the genus Daphnia are very rare. In general, large zooplankters are absent. The size composition of the zooplankton has a smaller range than in temperate regions. This is due to the absence of large-sized zooplankton species. The reasons for the differences in species variety and size composition between zooplankton of temperate and tropical regions is perhaps due to a number of factors. These include the effects of high and uniform temperatures, food availability and predation by fish and invertebrates.

The morphometrics and the proximate composition of the edible fresh water mussel Lamellidens lamellatus (Lea) from Bathalagoda tank, a man made reservoir in Sri Lanka

Morphometric characteristics of Lamellidens lamellatus were studied using a random sample of 138 individuals collected from Bathalagoda reservoir in Kurunegala district. The largest number of individuals in the collection was between 40-50 mm in length. They had a body weight between 60-80 gm. The most abundant bio-chemical component in the adductor and in the foot was protein. Carbohydrate and lipid quantities were almost equal while ash showed the least value. The total protein content ranged from 48.8% to 73.4%; the carbohydrate content from 12.64% to 23.8%; and lipid content from 12.0% to 28.1% of their dry weight. It was found that there were significant relationships between the length and the body weight; and between length and volume.

A comparative study of the morphometrics and the proximate composition of two edible molluscs Crassostrea cuculata (Born) and Perna perna (L.)

The morphometrics and the bio-chemical characteristics of Crassostrea cuculata and Perna perna were studied. In the oyster, the length was found to be positively correlated with breadth and total body weight. There was also a positive relationship between the total body weight and the total muscle weight. In the mytilid the total body weight was positively correlated with length and total muscle weight. The muscle weight was also found to be highly correlated with the length. In both animals the relationship between the length and the total body weight was curvilinear. In the oyster, the protein content was found to increase with the total body weight and the total muscle weight. In the mytilid the protein content increased not only with the total body weight but also with the length. In both animals, the relative content of protein is higher than that of carbohydrates, lipids and ash.

Distributed optical fiber strain sensing in a secant piled wall

An optical fiber strain sensing technique, based on Brillouin Optical Time Domain Reflectometry (BOTDR), was used to obtain the full deformation profile of a secant pile wall during construction of an adjacent basement in London. Details of the installation of sensors as well as data processing are described. By installing optical fiber down opposite sides of the pile, the distributed strain profiles obtained can be used to give both the axial and lateral movements along the pile. Measurements obtained from the BOTDR were found in good agreement with inclinometer data from the adjacent piles. The relative merits of the two different techniques are discussed. © 2007 ASCE.

Monitoring tunnel deformation induced by close-proximity bored tunneling using distributed optical fiber strain measurements

The paper describes the use of optical fiber Brillouin Optical Time Domain Reflectometry (BOTDR) to monitor the strain distribution in an existing tunnel while a twin tunnel was bored at close-proximity. The twin circular bored tunnels between Serangoon and Bartley stations on the new Circle Line Stage 3 subway in Singapore were constructed at close-proximity to avoid underpinning the foundations of adjacent buildings. The minimum clear separation of the two tunnels is 2.3m (0.4 times the tunnel diameter). The Outer Tunnel was constructed first, followed by the Inner Tunnel, with the earth-pressure balance tunnel boring machines maintained at a minimum of 100m apart. In this trial application of BOTDR, the strain distribution along the Outer Tunnel was measured, in order to monitor its deformation due to the boring of the Inner Tunnel at close-proximity. The aim of the trial application was to determine the practicality of this monitoring method for future use in 'live' tunnels. This paper compares the measurements obtained from optical fiber BOTDR with conventional methods of tunnel monitoring and describes preliminary installation and workmanship guidelines derived from lessons learnt during this trial. © 2007 ASCE.

Effect of lykamin on growth and biochemical composition of long whiskered catfish, Mystus gulio (Hamilton) fingerlings under laboratory conditions

A growth trial was conducted to test the effect of Lykamin (dietary supplement) on growth, survival and feed conversion in Mystus gulio. Four isoproteic diets were formulated by incorporating the growth promoter, Lykamin at the levels of 0, 0.25, 0.50 and 0.75% diet. The crude protein content was 30% in each diet. The diets were fed to triplicate groups of catfish fingerlings twice daily at a level of 5% of the total body weight for 120 days. Regular fortnightly sampling was done to evaluate the growth performance of the experimental animals. Water quality parameters during the experimental period were maintained within the range suitable for catfish. The results showed better specific growth rate, weight gain, protein efficiency ratio and feed conversion ratio in the group which was given 0.75% Lykamin diet.

An analysis of the cooperative mechano-sensitive feedback between intracellular signaling, focal adhesion development, and stress fiber contractility

Cells communicate with their external environment via focal adhesions and generate activation signals that in turn trigger the activity of the intracellular contractile machinery. These signals can be triggered by mechanical loading that gives rise to a cooperative feedback loop among signaling, focal adhesion formation, and cytoskeletal contractility, which in turn equilibrates with the applied mechanical loads. We devise a signaling model that couples stress fiber contractility and mechano-sensitive focal adhesion models to complete this above mentioned feedback loop. The signaling model is based on a biochemical pathway where IP3 molecules are generated when focal adhesions grow. These IP3 molecules diffuse through the cytosol leading to the opening of ion channels that disgorge Ca2+ from the endoplasmic reticulum leading to the activation of the actin/myosin contractile machinery. A simple numerical example is presented where a one-dimensional cell adhered to a rigid substrate is pulled at one end, and the evolution of the stress fiber activation signal, stress fiber concentrations, and focal adhesion distributions are investigated. We demonstrate that while it is sufficient to approximate the activation signal as spatially uniform due to the rapid diffusion of the IP3 through the cytosol, the level of the activation signal is sensitive to the rate of application of the mechanical loads. This suggests that ad hoc signaling models may not be able to capture the mechanical response of cells to a wide range of mechanical loading events. © 2011 American Society of Mechanical Engineers.