Wave uplift pressures on horizontal platforms

The major objective of the study has been to investigate in detail the rapidly-varying peak uplift pressure and the slowly-varying positive and negative uplift pressures that are known to be exerted by waves against the underside of a horizontal pier or platform located above the still water level, but not higher than the crests of the incident waves.

In a "two-dimensional" laboratory study conducted in a 100-ft long by 15-in.-wide by 2-ft-deep wave tank with a horizontal smooth bottom, individually generated solitary waves struck a rigid, fixed, horizontal platform extending the width of the tank. Pressure transducers were mounted flush with the smooth soffit, or underside, of the platform. The location of the transducers could be varied.

The problem of a d equate dynamic and spatial response of the transducers was investigated in detail. It was found that unless the radius of the sensitive area of a pressure transducer is smaller than about one-third of the characteristic width of the pressure distribution, the peak pressure and the rise-time will not be recorded accurately. A procedure was devised to correct peak pressures and rise-times for this transducer defect.

The hydrodynamics of the flow beneath the platform are described qualitatively by a si1nple analysis, which relates peak pressure and positive slowly-varying pressure to the celerity of the wave front propagating beneath the platform, and relates negative slowly-varying pressure to the process by which fluid recedes from the platform after the wave has passed. As the wave front propagates beneath the platform, its celerity increases to a maximum, then decreases. The peak pressure similarly increases with distance from the seaward edge of the platform, then decreases.

Measured peak pressure head, always found to be less than five times the incident wave height above still water level, is an order of magnitude less than reported shock pressures due to waves breaking against vertical walls; the product of peak pressure and rise-time, considered as peak impulse, is of the order of 20% of reported shock impulse due to waves breaking against vertical walls. The maximum measured slowly-varying uplift pressure head is approximately equal to the incident wave height less the soffit clearance above still water level. The normalized magnitude and duration of negative pressure appears to depend principally on the ratio of soffit clearance to still water depth and on the ratio of platform length to still water depth.

Profile soundings in lakes of the younger morainal area of Sleswick-Holstein with a sediment-echo-sounder of 30 kHz [Translation from: Wass.Boden 26, 135-138, 1974]

To be able to carry out physical, chemical and biological investigations on a lake, one needs a thorough knowledge of the volume of water and the shape of the lake basin. Little is known about the about the morphology of the lakes in Schleswig-Holstein and its ecological consequences. For this research a 30 KHz echo sounder with sediment transceiver was used to carry out profile determinations (echo soundings). This apparatus continuously records on paper the different reflexions and absorptions of the sediment and water body in the corresponding depth. By this, acoustically noticeable layers and different densities in the sediment and 'scattering layers' in the water body due to physical, chemical and biological reasons (e.g. plans and single fish) are made visible. Result are summarised here regarding the echo soundings in Blunker See.

The production of algae growing on gravel in a chalk-stream

Epilithic algae, ie that growing on the surface of stones, was studied as part of the work on the energy flow of the chalk-stream ecosystem, by the River Laboratory. The study area was on Bere Stream and 2 neighbouring streams. The algal biomass was estimated from analysis of chlorophyll a. In Bere Stream the peak chlorophyll a cover occurred in April, while in the neighbouring streams, which have considerably lower nutrient levels, there was on peak. Assuming that 2% of a diatoms dry wt is chlorophyll a, then even in mid-April the biomass of epilithic algae amounted to no more than 15 g dry wt m Super(-2) of exposed gravel. Annual production was calculated to be > 15 times greater than biomass. The estimation of net primary production is always difficult for benthic floras and comparisons are especially difficult when different methods are used. But these figures contrast sharply with those for Ranunculus (water crowfoot) which has a ratio of annual production to maximal seasonal biomass of 1:16. The accumulation of algal biomass is apparently being prevented. Some organic matter may be excreted; some algae will be washed off the bed of the stream by current and grazing by herbivorous invertebrates will also tend to prevent algal accumulation.

Ecologia térmica e comportamento de construção de abrigos de Liolaemus lutzae (Lacertilia, Liolaemidae) em três áreas de restinga no estado do Rio de Janeiro, sudeste do Brasil: os efeitos de fatores extrínsecos e intrínsecos

Fatores extrínsecos afetam a ecologia térmica e o comportamento de lagartos no habitat, com as características ambientais locais podendo ocasionar alterações na temperatura corpórea (Tc) e no comportamento destes animais. Entretanto, fatores intrínsecos também representam uma importante influência para sua biologia, assim como fatores filogenéticos (históricos). Liolaemus lutzae (Liolaemidae) é uma espécie de lagarto com ocorrência restrita a restingas do estado do Rio de Janeiro (entre a Restinga da Marambaia no município do Rio de Janeiro e a restinga da Praia do Peró no município de Cabo Frio), vivendo exclusivamente na zona de vegetação halófila-psamófila-reptante a chamada área-de-praia da restinga (sujeita a altas temperaturas ambientais e ventos intensos constantes). Nessa área, onde vivem restritos a uma faixa de poucos metros de restinga, os indivíduos se abrigam escavando abrigos no substrato arenoso. Avaliei a importância de fontes ambientais de calor, da intensidade dos ventos, do sexo, da ontogenia, do comprimento rostro-cloacal (CRC) e da massa corpórea para a Tc e a taxa de atividade de lagartos L. lutzae (observando a ocorrência de variações sazonais), em estudos conduzidos no município de Arraial do Cabo, estado do Rio de Janeiro, sudeste do Brasil. Além disso, eu analisei se o comportamento de L. lutzae, direcionando as aberturas de seus abrigos foi afetado por fatores ambientais nas restingas da Reserva Ecológica Estadual de Jacarepiá e do Parque Natural Municipal de Grumari, ambas no estado do Rio de Janeiro. A atividade dos lagartos se estendeu durante o dia (0600h às 1800h), com máximo entre 1100h e 1300h (com variações sazonais). A Tc dos indivíduos foi 31,7  3,4 C, e variou ao longo do dia e sazonalmente. Em ambas as estações a Tc dos lagartos relacionaram-se às temperaturas do microhabitat (substrato e ar). A intensidade do vento influenciou a Tc dos lagartos (causando seu decréscimo), e a intensidade média do vento afetou o número de lagartos ativos (causando redução da atividade). Houve diferenças intersexuais no CRC, com os machos maiores do que as fêmeas, embora as fêmeas tenham tido maior massa corpórea relativa ao CRC correspondente, comparado aos machos. A Tc também diferiu inter-sexualmente (com machos mais quentes do que fêmeas) e ontogeneticamente (com jovens mais quentes do que adultos depois de removido o efeito do tamanho corpóreo). Houve relações entre a Tc e o CRC e entre a Tc e a massa corpórea, com lagartos maiores tendo Tc mais elevada (causada pela inércia térmica dos corpos). A variabilidade na Tc dos lagartos parece refletir a interação entre características ambientais locais, fatores intrínsecos e a filogenia da espécie. As aberturas dos abrigos foram localizadas principalmente próximas à linha de praia (possivelmente devido ao substrato menos compacto), predominantemente em terrenos inclinados e tiveram uma tendência de orientação influenciada pela inclinação do terreno. O comportamento de L. lutzae de orientar a entrada de seus abrigos para a direção descendente das inclinações pode ser vantajoso para torná-los menos vulneráveis a potenciais ameaças e distúrbios vindos da superfície.

BAMS: A Tool for Supervised Burned Area Mapping Using Landsat Data

A new supervised burned area mapping software named BAMS (Burned Area Mapping Software) is presented in this paper. The tool was built from standard ArcGIS (TM) libraries. It computes several of the spectral indexes most commonly used in burned area detection and implements a two-phase supervised strategy to map areas burned between two Landsat multitemporal images. The only input required from the user is the visual delimitation of a few burned areas, from which burned perimeters are extracted. After the discrimination of burned patches, the user can visually assess the results, and iteratively select additional sampling burned areas to improve the extent of the burned patches. The final result of the BAMS program is a polygon vector layer containing three categories: (a) burned perimeters, (b) unburned areas, and (c) non-observed areas. The latter refer to clouds or sensor observation errors. Outputs of the BAMS code meet the requirements of file formats and structure of standard validation protocols. This paper presents the tool's structure and technical basis. The program has been tested in six areas located in the United States, for various ecosystems and land covers, and then compared against the National Monitoring Trends in Burn Severity (MTBS) Burned Area Boundaries Dataset.

Ecologia de Tropidurus torquatus (Wied, 1820) (Squamata, Tropiduridae) no Costão de Itacoatiara, Parque Estadual da Serra da Tiririca, municípios de Niterói e Maricá, RJ

O lagarto Tropidurus torquatus (Wied, 1820) possui ampla distribuição geográfica e é encontrado em abundância nas áreas onde ocorre, sendo considerada uma espécie apropriada para estudos ecológicos. No presente estudo nós analisamos o período de atividade, o uso do microhabitat, a intensidade de forrageamento, a dieta e a ecologia térmica de uma população de T. torquatus do Costão de Itacoatiara, no Parque Estadual da Serra da Tiririca, situado nos municípios de Niterói e Maricá, RJ. Os dados foram coletados em dois períodos: entre julho de 2004 e janeiro de 2008 para estudo do período de atividade, uso do microhabitat e intensidade de forrageamento, e entre julho e agosto de 2010 para estudo da ecologia térmica e dieta. Todos os indivíduos coletados eram adultos, com comprimento rostro-cloacal médio de 66,2 12,0mm para machos (n = 11) e 64,1 8,0mm para fêmeas (n = 03). O período de atividade de T. torquatus no Costão de Itacoatiara durou de 12 a 14 horas. Teve um padrão unimodal na estação seca, com pico de atividade entre 09:00h e 13:00h, durante as horas mais quentes do dia. Na estação chuvosa o padrão de atividade foi bimodal, com um pico entre 8:00h e 9:00h e outro entre 16:00h e 17:00h, ambos associados aos horários de temperaturas ambientais mais amenas. O período de atividade não diferiu entre as estações, o que pode ser explicado pelo extenso pico de atividade dos lagartos na estação seca. Os microhabitats mais utilizados foram o substrato rochoso do Costão e a bromélia, refletindo a disponibilidade destes na área. A intensidade de forrageamento não diferiu sazonalmente e o tempo médio que os lagartos ficaram parados foi maior do que o tempo médio em deslocamento. A dieta foi onívora e esteve composta por artrópodes, principalmente insetos, e material vegetal, principalmente frutos. Os principais insetos consumidos foram Formicidae, Coleoptera e Hymenoptera não-Formicidae como pequenas vespas e abelhas. Os frutos, as sementes e as flores consumidos pertenciam às cactáceas Rhipsalis cereoides e Coleocephalocereus fluminensis, para as quais T. torquatus pode ser um potencial agente dispersor de sementes na área. Lagartos maiores consumiram itens maiores, mas em menor número, indicando um balanço energético positivo. O consumo de material vegetal variou de acordo com o tamanho dos lagartos, aumentando sua proporção nos indivíduos mais velhos. A temperatura média em atividade de T. torquatus foi de 34,3 2,5C, estando na faixa de temperatura corpórea média encontrada para outras populações e para outros Tropidurus. O substrato foi a fonte de calor ambiental com maior importância relativa para a termorregulação dos lagartos durante a estação seca, explicando cerca de 48% da variação na temperatura corpórea da população. Os lagartos termorregularam de forma passiva, principalmente em relação à temperatura do substrato.

Contribución al conocimiento de la biología del surel (Trachurus picturatus australis) del área de Mar del Plata (Pisces, Carangidae)

The individuals studied came from commercial catches on the coastal area off Mar del Plata. The monthly distribution of sizes shows that the juvenile stay in coastal waters, while the adult individuals leave those waters during winter season to return there in the spring during the season of sexual maturation and spawning, when the water reaches temperature of 10-11°C. The jack mackerel is a relatively small fish, compared with other species of its genus, and has a total length of scarcely 25 cm. The comparison of indexes and mesurements does not reveal any marked difference between sexes, except for the total length, which is greater in the females. Sexually nature individuals at a lenth of 13 cm have been found. Spawning takes place in coastal waters. A great part of the population spawns from December to January. There are oscillations ranging from November to March. On this latter month mature individuals of smaller size have veen found. The jack mackerel feeds usually on copepods and other planktonic organims, but it can feed also on juveniles of other fishes. This fish is caught throghout the whole year. The catches show their greater peak during winter; one other non-constant peak occurs during the spring (October-November) and declines shoraply during the summer months. It follows from this that the time of greates catch does not coincide with spawning season, or with the appearence of the greatest mean sizes. This happens because the interests of the fishermen are attracted during those months by others species of greater commercial value.

A large-area photolithography technique based on surface plasmons leakage modes

An atomic force microscope (AFM) assisted surface plasmons leakage radiation photolithography technique has been numerically demonstrated by using two-dimensional finite-difference time-domain (2D-FDTD) method. With the aid of a metallic AFM tip, particular characteristic of the Kretstchmann configuration to excite surface plasmons (SPs) is utilized to achieve large-area patterns with high spatial resolution and contrast, the photoresist could be exposed with low power laser due to the remarkable local field enhancement at the metal/dielectric interface and the resonant localized SPs modes near the tip. Good tolerance on the film thickness and incident angle has been obtained, which provides a good practicability for experiments. This photolithography technique proposed here can realize large-area, high-resolution, high-contrast, nondestructive, arbitrary-structure fabrication of nanoscale devices. (c) 2007 Elsevier B.V. All rights reserved.

Implementation of the nursing process in a health area: models and assessment structures used

Objective: to analyze what nursing models and nursing assessment structures have been used in the implementation of the nursing process at the public and private centers in the health area Gipuzkoa (Basque Country). Method: a retrospective study was undertaken, based on the analysis of the nursing records used at the 158 centers studied. Results: the Henderson model, Carpenito's bifocal structure, Gordon's assessment structure and the Resident Assessment Instrument Nursing Home 2.0 have been used as nursing models and assessment structures to implement the nursing process. At some centers, the selected model or assessment structure has varied over time. Conclusion: Henderson's model has been the most used to implement the nursing process. Furthermore, the trend is observed to complement or replace Henderson's model by nursing assessment structures.

High power single transverse mode operation of a tapered large-mode-area fiber laser

To get high output power with good beam quality, a tapered section is introduced to large-mode-area (LMA) Yb-doped fiber laser. Output characteristics of the fiber laser without tapered section and with tapered section are compared experimentally. When the launched pump power is 119.1 W, 77.9 W with M-2 3.08 and 56.4 W with M-2 1.14 can be obtained, respectively. The corresponding slope efficiencies are 71.8% and 54.1%, respectively. Although output power of the tapered fiber laser has 30.6% penalty, brightness of it is as much as 5.28 times of the fiber laser without tapered section. Moreover, spectra of them are measured. It is found that tapered section makes lasing wavelength of the fiber laser shorter. (c) 2007 Elsevier B.V. All rights reserved.

An Evaluation of the area stratification used for sampling tunas in the eastern Pacific Ocean and implications for estimating total annual catches

The Inter-American Tropical Tuna Commission (IATTC) staff has been sampling the size distributions of tunas in the eastern Pacific Ocean (EPO) since 1954, and the species composition of the catches since 2000. The IATTC staff use the data from the species composition samples, in conjunction with observer and/or logbook data, and unloading data from the canneries to estimate the total annual catches of yellowfin (Thunnus albacares), skipjack (Katsuwonus pelamis), and bigeye (Thunnus obesus) tunas. These sample data are collected based on a stratified sampling design. I propose an update of the stratification of the EPO into more homogenous areas in order to reduce the variance in the estimates of the total annual catches and incorporate the geographical shifts resulting from the expansion of the floating-object fishery during the 1990s. The sampling model used by the IATTC is a stratified two-stage (cluster) random sampling design with first stage units varying (unequal) in size. The strata are month, area, and set type. Wells, the first cluster stage, are selected to be sampled only if all of the fish were caught in the same month, same area, and same set type. Fish, the second cluster stage, are sampled for lengths, and independently, for species composition of the catch. The EPO is divided into 13 sampling areas, which were defined in 1968, based on the catch distributions of yellowfin and skipjack tunas. This area stratification does not reflect the multi-species, multi-set-type fishery of today. In order to define more homogenous areas, I used agglomerative cluster analysis to look for groupings of the size data and the catch and effort data for 2000–2006. I plotted the results from both datasets against the IATTC Sampling Areas, and then created new areas. I also used the results of the cluster analysis to update the substitution scheme for strata with catch, but no sample. I then calculated the total annual catch (and variance) by species by stratifying the data into new Proposed Sampling Areas and compared the results to those reported by the IATTC. Results showed that re-stratifying the areas produced smaller variances of the catch estimates for some species in some years, but the results were not significant.