Case studies on vibration based damage identification : multi-criteria approach

Vibration based damage identification methods examine the changes in primary modal parameters or quantities derived from modal parameters. As one method may have advantages over the other under some circumstances, a multi-criteria approach is proposed. Case studies are conducted separately on beam, plate and plate-on-beam structures. Using the numerically simulated modal data obtained through finite element analysis software, algorithms based on flexibility and strain energy changes before and after damage are obtained and used as the indices for the assessment of the state of structural health. Results show that the proposed multi-criteria method is effective in damage identification in these structures.

A new educational technology for media and communication studies : mapping media in Australia and Sweden

This chapter reports on Australian and Swedish experiences in the iterative design, development, and ongoing use of interactive educational systems we call ‘Media Maps.’ Like maps in general, Media Maps are usefully understood as complex cultural technologies; that is, they are not only physical objects, tools and artefacts, but also information creation and distribution technologies, the use and development of which are embedded in systems of knowledge and social meaning. Drawing upon Australian and Swedish experiences with one Media Map technology, this paper illustrates this three-layered approach to the development of media mapping. It shows how media mapping is being used to create authentic learning experiences for students preparing for work in the rapidly evolving media and communication industries. We also contextualise media mapping as a response to various challenges for curriculum and learning design in Media and Communication Studies that arise from shifts in tertiary education policy in a global knowledge economy.

The epistemology that maintains white race privilege, power and control of Indigenous Studies and Indigenous peoples' participation in universities

This paper represents my attempt to turn the gaze and demonstrate how Indigenous Studies is controlled in some Australian universities in ways that witness Indigenous peoples being further marginalised, denigrated and exploited. I have endeavoured to do this through sharing an experience as a case study. I have opted to write about it as a way of exposing the problematic nature of racism, systemic marginalisation, white race privilege and radicalised subjectivity played out within an Australian higher education institution and because I am dissatisfied with the on-going status quo. In bringing forth analysis to this case study, I reveal the relationships between oppression, white race privilege and institutional privilege and the epistemology that maintains them. In moving from the position of being silent on this experience to speaking about it, I am able to move from the position of object to subject and to gain a form of liberated voice (hooks 1989:9). Furthermore, I am hopeful that it will encourage others to examine their own practices within universities and to challenge the domination that continues to subjugate Indigenous peoples.

Advanced paternal age is associated with impaired neurocognitive outcomes during infancy and childhood

Background Advanced paternal age (APA) is associated with an increased risk of neurodevelopmental disorders such as autism and schizophrenia, as well as with dyslexia and reduced intelligence. The aim of this study was to examine the relationship between paternal age and performance on neurocognitive measures during infancy and childhood. Methods and Findings A sample of singleton children (n = 33,437) was drawn from the US Collaborative Perinatal Project. The outcome measures were assessed at 8 mo, 4 y, and 7 y (Bayley scales, Stanford Binet Intelligence Scale, Graham-Ernhart Block Sort Test, Wechsler Intelligence Scale for Children, Wide Range Achievement Test). The main analyses examined the relationship between neurocognitive measures and paternal or maternal age when adjusted for potential confounding factors. Advanced paternal age showed significant associations with poorer scores on all of the neurocognitive measures apart from the Bayley Motor score. The findings were broadly consistent in direction and effect size at all three ages. In contrast, advanced maternal age was generally associated with better scores on these same measures. Conclusions The offspring of older fathers show subtle impairments on tests of neurocognitive ability during infancy and childhood. In light of secular trends related to delayed fatherhood, the clinical implications and the mechanisms underlying these findings warrant closer scrutiny.

Teacher praise and feedback and students’ perceptions of the classroom environment

The relationships between teacher praise and feedback, and students’ perceptions of the classroom environment were investigated in six rural elementary schools (n 5 747). The Teacher Feedback Scale and My Classroom Scale were developed as part of this study and used to collect the data. Structural equation modelling was used to test a hypothesised model. The results indicated that negative teacher feedback and effort feedback were both related to students’ relationships with their teachers, while ability feedback was associated with perceptions of the classroom environment. Praise was not related to classroom environment or teacher–student relationships. Significant age and gender differences were found. Additionally, differences were found between students who were satisfied with their classroom and those who were dissatisfied. Satisfied students received more general praise, general ability feedback, effort feedback and less negative teacher feedback when compared to dissatisfied students. Research studies have emphasised the influence of signicicant adults (teachers and parents) on students’ personal development (Porlier et al., 1999) and the importance of significant others’ verbal statements when directed at children (Burnett, 1996a). The relationships between negative and positive statements made by teachers, parents, peers and siblings and children’s self-talk have been investigated (Burnett, 1996a) and positive statements (praise) have been found to be more beneficial than verbal criticism (Burnett, 1999). The quality of life in the classroom in recent times has been considered of great importance to students (Thorp et al., 1994) and this is recognised by Baker (1999) who reported a relationship between students’ satisfaction with the learning environment, and differential teacher feedback and praise. This study investigated the relationships between teacher praise and feedback, and how students perceived their classroom and their relationship with their teacher.

Drivers of technology substitution : successive generations of high tech products

Principal Topic High technology consumer products such as notebooks, digital cameras and DVD players are not introduced into a vacuum. Consumer experience with related earlier generation technologies, such as PCs, film cameras and VCRs, and the installed base of these products strongly impacts the market diffusion of the new generation products. Yet technology substitution has received only sparse attention in the diffusion of innovation literature. Research for consumer durables has been dominated by studies of (first purchase) adoption (c.f. Bass 1969) which do not explicitly consider the presence of an existing product/technology. More recently, considerable attention has also been given to replacement purchases (c.f. Kamakura and Balasubramanian 1987). Only a handful of papers explicitly deal with the diffusion of technology/product substitutes (e.g. Norton and Bass, 1987: Bass and Bass, 2004). They propose diffusion-type aggregate-level sales models that are used to forecast the overall sales for successive generations. Lacking household data, these aggregate models are unable to give insights into the decisions by individual households - whether to adopt generation II, and if so, when and why. This paper makes two contributions. It is the first large-scale empirical study that collects household data for successive generations of technologies in an effort to understand the drivers of adoption. Second, in comparision to traditional analysis that evaluates technology substitution as an ''adoption of innovation'' type process, we propose that from a consumer's perspective, technology substitution combines elements of both adoption (adopting the new generation technology) and replacement (replacing the generation I product with generation II). Based on this proposition, we develop and test a number of hypotheses. Methodology/Key Propositions In some cases, successive generations are clear ''substitutes'' for the earlier generation, in that they have almost identical functionality. For example, successive generations of PCs Pentium I to II to III or flat screen TV substituting for colour TV. More commonly, however, the new technology (generation II) is a ''partial substitute'' for existing technology (generation I). For example, digital cameras substitute for film-based cameras in the sense that they perform the same core function of taking photographs. They have some additional attributes of easier copying and sharing of images. However, the attribute of image quality is inferior. In cases of partial substitution, some consumers will purchase generation II products as substitutes for their generation I product, while other consumers will purchase generation II products as additional products to be used as well as their generation I product. We propose that substitute generation II purchases combine elements of both adoption and replacement, but additional generation II purchases are solely adoption-driven process. Extensive research on innovation adoption has consistently shown consumer innovativeness is the most important consumer characteristic that drives adoption timing (Goldsmith et al. 1995; Gielens and Steenkamp 2007). Hence, we expect consumer innovativeness also to influence both additional and substitute generation II purchases. Hypothesis 1a) More innovative households will make additional generation II purchases earlier. 1 b) More innovative households will make substitute generation II purchases earlier. 1 c) Consumer innovativeness will have a stronger impact on additional generation II purchases than on substitute generation II purchases. As outlined above, substitute generation II purchases act, in part like a replacement purchase for the generation I product. Prior research (Bayus 1991; Grewal et al 2004) identified product age as the most dominant factor influencing replacements. Hence, we hypothesise that: Hypothesis 2: Households with older generation I products will make substitute generation II purchases earlier. Our survey of 8,077 households investigates their adoption of two new generation products: notebooks as a technology change to PCs, and DVD players as a technology shift from VCRs. We employ Cox hazard modelling to study factors influencing the timing of a household's adoption of generation II products. We determine whether this is an additional or substitute purchase by asking whether the generation I product is still used. A separate hazard model is conducted for additional and substitute purchases. Consumer Innovativeness is measured as domain innovativeness adapted from the scales of Goldsmith and Hofacker (1991) and Flynn et al. (1996). The age of the generation I product is calculated based on the most recent household purchase of that product. Control variables include age, size and income of household, and age and education of primary decision-maker. Results and Implications Our preliminary results confirm both our hypotheses. Consumer innovativeness has a strong influence on both additional purchases (exp = 1.11) and substitute purchases (exp = 1.09). Exp is interpreted as the increased probability of purchase for an increase of 1.0 on a 7-point innovativeness scale. Also consistent with our hypotheses, the age of the generation I product has a dramatic influence for substitute purchases of VCR/DVD (exp = 2.92) and a strong influence for PCs/notebooks (exp = 1.30). Exp is interpreted as the increased probability of purchase for an increase of 10 years in the age of the generation I product. Yet, also as hypothesised, there was no influence on additional purchases. The results lead to two key implications. First, there is a clear distinction between additional and substitute purchases of generation II products, each with different drivers. Treating these as a single process will mask the true drivers of adoption. For substitute purchases, product age is a key driver. Hence, implications for marketers of high technology products can utilise data on generation I product age (e.g. from warranty or loyalty programs) to target customers who are more likely to make a purchase.

Management and organisational barriers in the acquisition of computer usage skills by mature age workers

Aim: To investigate workplace cultures in the acquisition of computer usage skills by mature age workers. Methods: Data were gathered through focus groups conducted at job network centres in the Greater Brisbane metropolitan region. Participants who took part were a mixture of workers and job-seekers. Results: The results suggest that mature age workers can be exposed to inappropriate computer training practices and age-insensitive attitudes towards those with low base computer skills. Conclusions: There is a need for managers to be observant of ageist attitudes in the work place and to develop age-sensitive strategies to help mature age workers learn computer usage skills. Mature age workers also need to develop skills in ways which are practical and meaningful to their work.

Nonfatal heroin overdoses in Queensland, Australia : an analysis of ambulance data

In the past decade, the utilization of ambulance data to inform the prevalence of nonfatal heroin overdose has increased. These data can assist public health policymakers, law enforcement agencies, and health providers in planning and allocating resources. This study examined the 672 ambulance attendances at nonfatal heroin overdoses in Queensland, Australia, in 2000. Gender distribution showed a typical 70/30 male-to-female ratio. An equal number of persons with nonfatal heroin overdose were between 15 and 24 years of age and 25 and 34 years of age. Police were present in only 1 of 6 cases, and 28.1% of patients reported using drugs alone. Ambulance data are proving to be a valuable population-based resource for describing the incidence and characteristics of nonfatal heroin overdose episodes. Future studies could focus on the differences between nonfatal heroin overdose and fatal heroin overdose samples.

Designers' experience and collaborative design : two case studies

Experience underlies all kinds of human knowledge and determines how people interact with products and environments. It also influences designers’ knowledge and their design process. An issue not fully addressed in current literature is about the way in which designers’ individual experience influences design tasks. This paper presents two qualitative design case studies that involve experiments employing collaborative design approaches. Case study one focuses on product usability and case study two, sustainable design. Both studies applied an empirical approach; data collected consisted of sketches and audio- and video-recordings. The studies share a common research approach that opens the discussion about designers’ interactions; the way those interactions reveal knowledge and experience, the influence of these interactions upon the design process and approach to design tasks. This paper will present the correlations and discrepancies between these two case studies and the collaborative design approach used in each study, outlining future research endeavors.

Lateral bone density variations in the scoliotic spine

Adolescent Idiopathic Scoliosis (AIS) is the most common deformity of the spine, affecting 2-4% of the population. Previous studies have shown that the vertebrae in scoliotic spines undergo abnormal shape changes, however there has been little exploration of how scoliosis affects bone density distribution within the vertebrae. In this study, existing CT scans of 53 female idiopathic scoliosis patients with right-sided main thoracic curves were used to measure the lateral (right to left) bone density profile at mid-height through each vertebral body. Five key bone density profile measures were identified from each normalised bone density distribution, and multiple regression analysis was performed to explore the relationship between bone density distribution and patient demographics (age, height, weight, body mass index (BMI), skeletal maturity, time since Menarche, vertebral level, and scoliosis curve severity). Results showed a marked convex/concave asymmetry in bone density for vertebral levels at or near the apex of the scoliotic curve. At the apical vertebra, mean bone density at the left side (concave) cortical shell was 23.5% higher than for the right (convex) cortical shell, and cancellous bone density along the central 60% of the lateral path from convex to concave increased by 13.8%. The centre of mass of the bone density profile at the thoracic curve apex was located 53.8% of the distance along the lateral path, indicating a shift of nearly 4% toward the concavity of the deformity. These lateral bone density gradients tapered off when moving away from the apical vertebra. Multi-linear regressions showed that the right cortical shell peak bone density is significantly correlated with skeletal maturity, with each Risser increment corresponding to an increase in mineral equivalent bone density of 4-5%. There were also statistically significant relationships between patient height, weight and BMI, and the gradient of cancellous bone density along the central 60% of the lateral path. Bone density gradient is positively correlated with weight, and negatively correlated with height and BMI, such that at the apical vertebra, a unit decrease in BMI corresponds to an almost 100% increase in bone density gradient.

From Prosumer to Produser: Understanding User-Led Content Creation

Alvin Toffler’s image of the prosumer (1970, 1980, 1990) continues to influence in a significant way our understanding of the user-led, collaborative processes of content creation which are today labelled “social media” or “Web 2.0”. A closer look at Toffler’s own description of his prosumer model reveals, however, that it remains firmly grounded in the mass media age: the prosumer is clearly not the self-motivated creative originator and developer of new content which can today be observed in projects ranging from open source software through Wikipedia to Second Life, but simply a particularly well-informed, and therefore both particularly critical and particularly active, consumer. The highly specialised, high end consumers which exist in areas such as hi-fi or car culture are far more representative of the ideal prosumer than the participants in non-commercial (or as yet non-commercial) collaborative projects. And to expect Toffler’s 1970s model of the prosumer to describe these 21st-century phenomena was always an unrealistic expectation, of course. To describe the creative and collaborative participation which today characterises user-led projects such as Wikipedia, terms such as ‘production’ and ‘consumption’ are no longer particularly useful – even in laboured constructions such as ‘commons-based peer-production’ (Benkler 2006) or ‘p2p production’ (Bauwens 2005). In the user communities participating in such forms of content creation, roles as consumers and users have long begun to be inextricably interwoven with those as producer and creator: users are always already also able to be producers of the shared information collection, regardless of whether they are aware of that fact – they have taken on a new, hybrid role which may be best described as that of a produser (Bruns 2008). Projects which build on such produsage can be found in areas from open source software development through citizen journalism to Wikipedia, and beyond this also in multi-user online computer games, filesharing, and even in communities collaborating on the design of material goods. While addressing a range of different challenges, they nonetheless build on a small number of universal key principles. This paper documents these principles and indicates the possible implications of this transition from production and prosumption to produsage.

User behaviours and intentions with digital news media in Australia

This paper summarises findings from a survey of user behaviors and intentions towards digital media and information in Australia. It was undertaken in the first quarter of 2009 by the Queensland University of Technology Creative Industries Faculty and was funded by the Smart Services Cooperative Research Centre. The survey targeted users of 2 news and information sites that are available online only. Findings highlighted differences between the 18-24 year age segment and older users. Social networks (specifically friends and family) were rated as the least reliable, relevant and accurate sources of news. Other findings indicate online news sources that are associated with an established newspaper are highly valued as reliable, relevant and accurate news sources by most people. While most people prefer to use online news sources, there is a great deal of variation in the ways in which people actually use online news. From a total of 524 respondents to the survey it was possible to identify three main types of online news consumers: convenience, loyal and customising users.

Five case studies applying soft systems methodology to knowledge management

Construction projects are faced with a challenge that must not be underestimated. These projects are increasingly becoming highly competitive, more complex, and difficult to manage. They become problems that are difficult to solve using traditional approaches. Soft Systems Methodology (SSM) is a systems approach that is used for analysis and problem solving in such complex and messy situations. SSM uses “systems thinking” in a cycle of action research, learning and reflection to help understand the various perceptions that exist in the minds of the different people involved in the situation. This paper examines the benefits of applying SSM to problems of knowledge management in construction project management, especially those situations that are challenging to understand and difficult to act upon. It includes five case studies of its use in dealing with the confusing situations that incorporate human, organizational and technical aspects.