Industry-school partnerships: An ecological case study to understand operational dynamics

This thesis is an ecological systems case study of an industry-school partnership. It examines a minerals and energy sector partnership with Queensland schools and explains the operational dynamics. In doing so, an original contribution to theory and practice was presented, together with implications for the impact of industry on education.

Limitations of a laboratory scale model in predicting optimal pilot scale conditions for dilute acid pretreatment of sugarcane bagasse

Pilot and industrial scale dilute acid pretreatment data can be difficult to obtain due to the significant infrastructure investment required. Consequently, models of dilute acid pretreatment by necessity use laboratory scale data to determine kinetic parameters and make predictions about optimal pretreatment conditions at larger scales. In order for these recommendations to be meaningful, the ability of laboratory scale models to predict pilot and industrial scale yields must be investigated. A mathematical model of the dilute acid pretreatment of sugarcane bagasse has previously been developed by the authors. This model was able to successfully reproduce the experimental yields of xylose and short chain xylooligomers obtained at the laboratory scale. In this paper, the ability of the model to reproduce pilot scale yield and composition data is examined. It was found that in general the model over predicted the pilot scale reactor yields by a significant margin. Models that appear very promising at the laboratory scale may have limitations when predicting yields on a pilot or industrial scale. It is difficult to comment whether there are any consistent trends in optimal operating conditions between reactor scale and laboratory scale hydrolysis due to the limited reactor datasets available. Further investigation is needed to determine whether the model has some efficacy when the kinetic parameters are re-evaluated by parameter fitting to reactor scale data, however, this requires the compilation of larger datasets. Alternatively, laboratory scale mathematical models may have enhanced utility for predicting larger scale reactor performance if bulk mass transport and fluid flow considerations are incorporated into the fibre scale equations. This work reinforces the need for appropriate attention to be paid to pilot scale experimental development when moving from laboratory to pilot and industrial scales for new technologies.

Embodying a future for the future: Creative Robotics and Ecosophical Practice

In recent years I have begun to integrate Creative Robotics into my Ecosophically-led art practices – which I have long deployed to investigate, materialise and engage thorny, ecological questions of the Anthropocene, seeking to understand how such forms of practice may promote the cultural conditions required to assure, rather than degrade, our collective futures. Many of us would instinctively conceive of robotics as an industrially driven endeavor, shaped by the pursuit of relentless efficiencies. Instead I ask through my practices, might the nascent field of Creative Robotics still be able to emerge with radically different frames of intention? Might creative practitioners still be able to shape experiences using robotic media that retain a healthy criticality towards such productivist lineages? Could this nascent form even bring forward fresh new techniques and assemblages that better encourage conversations around sustaining a future for the future, and, if so, which of its characteristics presents the greatest opportunities? I therefore ask, when Creative Robotics and Ecosophical Practice combine forces in strategic intervention, what qualities of this hybrid might best further the central aims of Ecosophical Practice – encouraging cultural conditions required to assure a future for the future?

Exposure to bioaerosols in the school environment in Brisbane, Australia

Introduction: Exposure to bioaerosols in indoor environments has been linked to various adverse health effects, such as airway disorders and upper respiratory tract symptoms. The aim of this study was to assess exposure to bioaerosols in the school environment in Brisbane, Australia. Methods: Culturable fungi and endotoxin measurements were conducted in six schools between October 2010 and May 2011. Culturable fungi (2 indoor air and 1-2 outdoor air samples per school) were assessed using a Biotest RCS High Flow Air Sampler, with a flow rate of either 50L/min or 20L/min. A rose pengar agar was used for recovery, which was incubated prior to counting and partial identification. Endotoxins were sampled (8h, 2L/min) using SKC glass fibre filters (4 indoor air samples per school) and analysed using an endpoint chromogenic LAL assay. Results: The arithmetic mean for fungi concentration in indoor and outdoor air was 710 cfu/m3(125- 1900 cfu/m3) and 524 cfu/m3 (140-1250 cfu/m3), respectively. The most frequently isolated fungal genus from the outdoor air was Cladosporium (over 40 %), followed by isolated Penicillium (21%) and Aspergillus (12%). The percent of Penicillium, Cladosporium and Aspergillus in indoor air samples was 32%, 32% and 8%, respectively. The aritmetic mean of endotoxin concentration was 0.59 EU/m3 (0-2,2 EU/m3). Discussion: The results of the current study are in agreement with previously reported studies, in that airborne fungi and endotoxin concentrations varied extensively, and were mostly dependent on climatic conditions. In addition, the indoor air mycoflora largely reflected the fungal flora present in the outdoor air, with Cladosporium being the most common in both outdoor and indoor (with Penicillium) air. In indoor air, unusually high endotoxin levels, over 1 EU/m3, were detected at 2 schools. Although these schools were not affected by the recent Brisbane floods, persistent rain prior to and during the study perios could explain the results.

Well-trained, healthy triathletes experience no adverse health risks regarding oxidative stress and DNA damage by participating in an ultra-endurance event

Also physical exercise in general is accepted to be protective, acute and strenuous exercise has been shown to induce oxidative stress. Enhanced formation of free radicals leads to oxidation of macromolecules and to DNA damage. On the other hand ultra-endurance events which require strenuous exercise are very popular and the number of participants is continuously increasing worldwide. Since only few data exists on Ironman triathletes, who are prototypes of ultra-endurance athletes, this study was aimed at assessing the risk of oxidative stress and DNA damage after finishing a triathlon and to predict a possible health risk. Blood samples of 42 male athletes were taken 2 days before, within 20 min after the race, 1, 5 and 19 days post-race. Oxidative stress marker increased only moderately after the race and returned to baseline after 5 days. Marker of DNA damage measured by the SCGE assay with and without restriction enzymes as well as by the sister chromatid exchange assay did either show no change or deceased within the first day after the race. Due to intake during the race and the release by the cells plasma concentrations of vitamin C and α-tocopherol increased after the event and returned to baseline 1 day after. This study indicates that despite a temporary increase in some oxidative stress markers, there is no persistent oxidative stress and no DNA damage in response to an Ironman triathlon in trained athletes, mainly due to an appropriate antioxidant intake and general protective alterations in the antioxidant defence system.

Prediction of shrinkage and porosity during drying: Considering both material properties and process conditions

Drying of food materials offers a significant increase in the shelf life of food materials, along with the modification of quality attributes due to simultaneous heat and mass transfer. Shrinkage and variations in porosity are the common micro and microstructural changes that take place during the drying of mostly the food materials. Although extensive research has been carried out on the prediction of shrinkage and porosity over the time of drying, no single model exists which consider both material properties and process condition in the same model. In this study, an attempt has been made to develop and validate shrinkage and porosity models of food materials during drying considering both process parameters and sample properties. The stored energy within the sample, elastic potential energy, glass transition temperature and physical properties of the sample such as initial porosity, particle density, bulk density and moisture content have been taken into consideration. Physical properties and validation have been made by using a universal testing machine ( Instron 2kN), a profilometer (Nanovea) and a pycnometer. Apart from these, COMSOL Multiphysics 4.4 has been used to solve heat and mass transfer physics. Results obtained from models of shrinkage and porosity is quite consistent with the experimental data. Successful implementation of these models would ensure the use of optimum energy in the course of drying and better quality retention of dried foods.

Improving PLDA speaker verification using WMFD and linear-weighted approaches in limited microphone data conditions

This paper proposes the addition of a weighted median Fisher discriminator (WMFD) projection prior to length-normalised Gaussian probabilistic linear discriminant analysis (GPLDA) modelling in order to compensate the additional session variation. In limited microphone data conditions, a linear-weighted approach is introduced to increase the influence of microphone speech dataset. The linear-weighted WMFD-projected GPLDA system shows improvements in EER and DCF values over the pooled LDA- and WMFD-projected GPLDA systems in inter-view-interview condition as WMFD projection extracts more speaker discriminant information with limited number of sessions/ speaker data, and linear-weighted GPLDA approach estimates reliable model parameters with limited microphone data.

Common psychotic symptoms can be explained by the theory of ecological perception

The symptoms of psychiatric illness are diverse, as are the causes of the illnesses that cause them. Yet, regardless of the heterogeneity of cause and presentation, a great deal of symptoms can be explained by the failure of a single perceptual function – the reprocessing of ecological perception. It is a central tenet of the ecological theory of perception that we perceive opportunities to act. It has also been found that perception automatically causes actions and thoughts to occur unless this primary action pathway is inhibited. Inhibition allows perceptions to be reprocessed into more appropriate alternative actions and thoughts. Reprocessing of this kind takes place over the entire frontal lobe and it renders action optional. Choice about what action to take (if any) is the basis for the feeling of autonomy and ultimately for the sense-of-self. When thoughts and actions occur automatically (without choice) they appear to originate outside of the self, thereby providing prima facie evidence for some of the bizarre delusions that define schizophrenia such as delusional misidentification, delusions of control and Cotard’s delusion. Automatic actions and thoughts are triggered by residual stimulation whenever reprocessing is insufficient to balance automatic excitatory cues (for whatever reason). These may not be noticed if they are neutral and therefore unimportant whereas actions and thoughts with a positive bias are desirable. Responses to negative stimulus, on the other hand, are always unwelcome, because the actions that are triggered will carry the negative bias. Automatic thoughts may include spontaneous positive feelings of love and joy, but automatic negative thoughts and visualisations are experienced as hallucinations. Not only do these feel like they emerge from elsewhere but they carry a negative bias (they are most commonly critical, rude and are irrationally paranoid). Automatic positive actions may include laughter and smiling and these are welcome. Automatic behaviours that carry a negative bias, however, are unwelcome and like hallucinations, occur without a sense of choice. These include crying, stereotypies, perseveration, ataxia, utilization and imitation behaviours and catatonia.

Employee reactions to behavioural control under conditions of stress: The moderating role of self-efficacy

Extensive research conducted in the occupational stress literature has failed to provide convincing support for the stress-buffering effects of work control on employee adjustment. Drawing on research conducted in the laboratory context, it was proposed that the stress-buffering effects of work control on employee adjustment would be more marked at high, rather than low, levels of self-efficacy. In a sample of 100 customer service representatives, a significant three-way interaction among role conflict, work control and self-efficacy (measured at Time 1) was observed on (low) depersonalization (measured at Time 2). Consistent with expectations, work control reduced the negative effects of work stress on this outcome measure only for employees who perceived high levels of self-efficacy at work. In addition, there was evidence to suggest that self-efficacy moderated the main effects of work control on job satisfaction and somatic health. These findings are discussed in terms of their theoretical contribution to the job strain model, and also in relation to workplace interventions designed to improve levels of employee adjustment.

Shear tests of hollow flange channel beams with real support conditions

This paper presents the details of experimental studies on the effect of real support conditions on the shear strength of hollow flange channel beams, known as LiteSteel beams (LSB). The LSB has a unique shape of a channel beam with two rectangular hollow flanges, made using a unique manufacturing process. In many applications in the building industry LSBs are used with only one web side plate (WSP) at their supports. The WSPs are also often not full height plates. Past research studies showed that these real support connections did not provide the required simply supported conditions. Many studies have been carried out to evaluate the behaviour and design of LSBs with simply supported conditions subject to pure bending and predominant shear actions. To date, however, no investigation has been conducted into the effect of real support conditions on the shear strength of LSBs. Hence a detailed experimental study based on 25 shear tests was undertaken to investigate the shear behaviour and strength of LSBs with real support conditions. Simply supported test specimens of LSBs with aspect ratios of 1.0 and 1.5 were loaded at mid-span until failure. It was found that the effect of using one WSP on the shear behaviour of LSB is significant and there is about 25% shear capacity reduction due to the lateral movement of the bottom flange at the supports. Shear capacity of LSB was also found to decrease when full height WSPs were not used. Suitably improved support connections were developed to improve the shear capacity of LSBs based on test results. Details of the recommended support connections and shear capacity results are given in this paper.

Anthropogenic nitrogen deposition predicts local grassland primary production worldwide

Humans dominate many important Earth system processes including the nitrogen (N) cycle. Atmospheric N deposition affects fundamental processes such as carbon cycling, climate regulation, and biodiversity, and could result in changes to fundamental Earth system processes such as primary production. Both modelling and experimentation have suggested a role for anthropogenically altered N deposition in increasing productivity, nevertheless, current understanding of the relative strength of N deposition with respect to other controls on production such as edaphic conditions and climate is limited. Here we use an international multiscale data set to show that atmospheric N deposition is positively correlated to aboveground net primary production (ANPP) observed at the 1-m2 level across a wide range of herbaceous ecosystems. N deposition was a better predictor than climatic drivers and local soil conditions, explaining 16% of observed variation in ANPP globally with an increase of 1 kg N·ha-1·yr-1 increasing ANPP by 3%. Soil pH explained 8% of observed variation in ANPP while climatic drivers showed no significant relationship. Our results illustrate that the incorporation of global N deposition patterns in Earth system models are likely to substantially improve estimates of primary production in herbaceous systems. In herbaceous systems across the world, humans appear to be partially driving local ANPP through impacts on the N cycle.

Assessment of the risk of failure of high voltage substations due to environmental conditions and pollution on insulators

Pollution on electrical insulators is one of the greatest causes of failure of substations subjected to high levels of salinity and environmental pollution. Considering leakage current as the main indicator of pollution on insulators, this paper focus on establishing the effect of the environmental conditions on the risk of failure due to pollution on insulators and determining the significant change in the magnitude of the pollution on the insulators during dry and humid periods. Hierarchical segmentation analysis was used to establish the effect of environmental conditions on the risk of failure due to pollution on insulators. The Kruskal-Wallis test was utilized to determine the significant changes in the magnitude of the pollution due to climate periods. An important result was the discovery that leakage current was more common on insulators during dry periods than humid ones. There was also a higher risk of failure due to pollution during dry periods. During the humid period, various temperatures and wind directions produced a small change in the risk of failure. As a technical result, operators of electrical substations can now identify the cause of an increase in risk of failure due to pollution in the area. The research provides a contribution towards the behaviour of the leakage current under conditions similar to those of the Colombian Caribbean coast and how they affect the risk of failure of the substation due to pollution.

Adverse effects of androgen-deprivation therapy in prostate cancer and their management

Objective To provide an up-to-date summary of current literature on the management of adverse effects of androgen-deprivation therapy (ADT). Patients and Methods All relevant medical literature on men with prostate cancer treated with ADT from 2005 to 2014, and older relevant papers, were reviewed. Recent health advisory statements from the Australian government, societies and advocacy groups have been incorporated to the document. Results There are numerous adverse effects of ADT that require pro-active prevention and treatment. Ranging from cardiovascular disease, diabetes and osteoporosis, to depression, cognitive decline and sexual dysfunction, the range of adverse effects is wide. Baseline assessment, monitoring, prevention and consultation from a multidisciplinary team are important in minimising the harm from ADT. Conclusions This review provides a series of practical recommendations to assist with managing the adverse effects of ADT.

Priority threat management of invasive animals to protect biodiversity under climate change

Climate change is a major threat to global biodiversity, and its impacts can act synergistically to heighten the severity of other threats. Most research on projecting species range shifts under climate change has not been translated to informing priority management strategies on the ground. We develop a prioritization framework to assess strategies for managing threats to biodiversity under climate change and apply it to the management of invasive animal species across one-sixth of the Australian continent, the Lake Eyre Basin. We collected information from key stakeholders and experts on the impacts of invasive animals on 148 of the region's most threatened species and 11 potential strategies. Assisted by models of current distributions of threatened species and their projected distributions, experts estimated the cost, feasibility, and potential benefits of each strategy for improving the persistence of threatened species with and without climate change. We discover that the relative cost-effectiveness of invasive animal control strategies is robust to climate change, with the management of feral pigs being the highest priority for conserving threatened species overall. Complementary sets of strategies to protect as many threatened species as possible under limited budgets change when climate change is considered, with additional strategies required to avoid impending extinctions from the region. Overall, we find that the ranking of strategies by cost-effectiveness was relatively unaffected by including climate change into decision-making, even though the benefits of the strategies were lower. Future climate conditions and impacts on range shifts become most important to consider when designing comprehensive management plans for the control of invasive animals under limited budgets to maximize the number of threatened species that can be protected.

A Submission to the Joint Standing Committee on Treaties on the Anti-Counterfeiting Trade Agreement 2011 (# ACTA)

“If Hollywood could order intellectual property laws for Christmas, what would they look like? This is pretty close.” David Fewer “While European and American IP maximalists have pushed for TRIPS-Plus provisions in FTAs and bilateral agreements, they are now pushing for TRIPS-Plus-Plus protections in these various forums.” Susan Sell “ACTA is a threat to the future of a free and open Internet.” Alexander Furnas “Implementing the agreement could open a Pandora's box of potential human rights violations.” Amnesty International. “I will not take part in this masquerade.” Kader Arif, Rapporteur for the Anti-Counterfeiting Trade Agreement 2011 in the European Parliament Executive Summary As an independent scholar and expert in intellectual property, I am of the view that the Australian Parliament should reject the adoption of the Anti-Counterfeiting Trade Agreement 2011. I would take issue with the Department of Foreign Affairs and Trade’s rather partisan account of the negotiations, the consultations, and the outcomes associated with the Anti-Counterfeiting Trade Agreement 2011. In my view, the negotiations were secretive and biased; the local consultations were sometimes farcical because of the lack of information about the draft texts of the agreement; and the final text of the Anti-Counterfeiting Trade Agreement 2011 is not in the best interests of Australia, particularly given that it is a net importer of copyright works and trade mark goods and services. I would also express grave reservations about the quality of the rather pitiful National Interest Analysis – and the lack of any regulatory impact statement – associated with the Anti-Counterfeiting Trade Agreement 2011. The assertion that the Anti-Counterfeiting Trade Agreement 2011 does not require legislative measures is questionable – especially given the United States Trade Representative has called the agreement ‘the highest-standard plurilateral agreement ever achieved concerning the enforcement of intellectual property rights.’ It is worthwhile reiterating that there has been much criticism of the secretive and partisan nature of the negotiations surrounding the Anti-Counterfeiting Trade Agreement 2011. Sean Flynn summarizes these concerns: "The negotiation process for ACTA has been a case study in establishing the conditions for effective industry capture of a lawmaking process. Instead of using the relatively transparent and inclusive multilateral processes, ACTA was launched through a closed and secretive “‘club approach’ in which like-minded jurisdictions define enforcement ‘membership’ rules and then invite other countries to join, presumably via other trade agreements.” The most influential developing countries, including Brazil, India, China and Russia, were excluded. Likewise, a series of manoeuvres ensured that public knowledge about the specifics of the agreement and opportunities for input into the process were severely limited. Negotiations were held with mere hours notice to the public as to when and where they would be convened, often in countries half away around the world from where public interest groups are housed. Once there, all negotiation processes were closed to the public. Draft texts were not released before or after most negotiating rounds, and meetings with stakeholders took place only behind closed doors and off the record. A public release of draft text, in April 2010, was followed by no public or on-the-record meetings with negotiators." Moreover, it is disturbing that the Anti-Counterfeiting Trade Agreement 2011 has been driven by ideology and faith, rather than by any evidence-based policy making Professor Duncan Matthews has raised significant questions about the quality of empirical evidence used to support the proposal of Anti-Counterfeiting Trade Agreement 2011: ‘There are concerns that statements about levels of counterfeiting and piracy are based either on customs seizures, with the actual quantities of infringing goods in free circulation in any particular market largely unknown, or on estimated losses derived from industry surveys.’ It is particularly disturbing that, in spite of past criticism, the Department of Foreign Affairs and Trade has supported the Anti-Counterfeiting Trade Agreement 2011, without engaging the Productivity Commission or the Treasury to do a proper economic analysis of the proposed treaty. Kader Arif, Rapporteur for the Anti-Counterfeiting Trade Agreement 2011 in the European Parliament, quit his position, and said of the process: "I want to denounce in the strongest possible manner the entire process that led to the signature of this agreement: no inclusion of civil society organisations, a lack of transparency from the start of the negotiations, repeated postponing of the signature of the text without an explanation being ever given, exclusion of the EU Parliament's demands that were expressed on several occasions in our assembly. As rapporteur of this text, I have faced never-before-seen manoeuvres from the right wing of this Parliament to impose a rushed calendar before public opinion could be alerted, thus depriving the Parliament of its right to expression and of the tools at its disposal to convey citizens' legitimate demands.” Everyone knows the ACTA agreement is problematic, whether it is its impact on civil liberties, the way it makes Internet access providers liable, its consequences on generic drugs manufacturing, or how little protection it gives to our geographical indications. This agreement might have major consequences on citizens' lives, and still, everything is being done to prevent the European Parliament from having its say in this matter. That is why today, as I release this report for which I was in charge, I want to send a strong signal and alert the public opinion about this unacceptable situation. I will not take part in this masquerade." There have been parallel concerns about the process and substance of the Anti-Counterfeiting Trade Agreement 2011 in the context of Australia. I have a number of concerns about the substance of the Anti-Counterfeiting Trade Agreement 2011. First, I am concerned that the Anti-Counterfeiting Trade Agreement 2011 fails to provide appropriate safeguards in respect of human rights, consumer protection, competition, and privacy laws. It is recommended that the new Joint Parliamentary Committee on Human Rights investigate this treaty. Second, I argue that there is a lack of balance to the copyright measures in the Anti-Counterfeiting Trade Agreement 2011 – the definition of piracy is overbroad; the suite of civil remedies, criminal offences, and border measures is excessive; and there is a lack of suitable protection for copyright exceptions, limitations, and remedies. Third, I discuss trade mark law, intermediary liability, and counterfeiting. I express my concerns, in this context, that the Anti-Counterfeiting Trade Agreement 2011 could have an adverse impact upon consumer interests, competition policy, and innovation in the digital economy. I also note, with concern, the lobbying by tobacco industries for the Anti-Counterfeiting Trade Agreement 2011 – and the lack of any recognition in the treaty for the capacity of countries to take measures of tobacco control under the World Health Organization Framework Convention on Tobacco Control. Fourth, I note that the Anti-Counterfeiting Trade Agreement 2011 provides no positive obligations to promote access to essential medicines. It is particularly lamentable that Australia and the United States of America have failed to implement the Doha Declaration on the TRIPS Agreement and Public Health 2001 and the WTO General Council Decision 2003. Fifth, I express concerns about the border measures in the Anti-Counterfeiting Trade Agreement 2011. Such measures lack balance – and unduly favour the interests of intellectual property owners over consumers, importers, and exporters. Moreover, such measures will be costly, as they involve shifting the burden of intellectual property enforcement to customs and border authorities. Interdicting, seizing, and destroying goods may also raise significant trade issues. Finally, I express concern that the Anti-Counterfeiting Trade Agreement 2011 undermines the role of existing international organisations, such as the United Nations, the World Intellectual Property Organization and the World Trade Organization, and subverts international initiatives such as the WIPO Development Agenda 2007. I also question the raison d'être, independence, transparency, and accountability of the proposed new ‘ACTA Committee’. In this context, I am concerned by the shift in the position of the Labor Party in its approach to international treaty-making in relation to intellectual property. The Australian Parliament adopted the Australia-United States Free Trade Agreement 2004, which included a large Chapter on intellectual property. The treaty was a ‘TRIPs-Plus’ agreement, because the obligations were much more extensive and prescriptive than those required under the multilateral framework established by the TRIPS Agreement 1994. During the debate over the Australia-United States Free Trade Agreement 2004, the Labor Party expressed the view that it would seek to mitigate the effects of the TRIPS-Plus Agreement, when at such time it gained power. Far from seeking to ameliorate the effects of the Australia-United States Free Trade Agreement 2004, the Labor Government would seek to lock Australia into a TRIPS-Double Plus Agreement – the Anti-Counterfeiting Trade Agreement 2011. There has not been a clear political explanation for this change in approach to international intellectual property. For both reasons of process and substance, I conclude that the Australian Parliament and the Australian Government should reject the Anti-Counterfeiting Trade Agreement 2011. The Australian Government would do better to endorse the Washington Declaration on Intellectual Property and the Public Interest 2011, and implement its outstanding obligations in respect of access to knowledge, access to essential medicines, and the WIPO Development Agenda 2007. The case study of the Anti-Counterfeiting Trade Agreement 2011 highlights the need for further reforms to the process by which Australia engages in international treaty-making.