Flower abscission and fruit set on table grapes (Vitis vinifera L.): unraveling physiological and molecular mechanisms

Doutoramento em Engenharia Agronómica - Instituto Superior de Agronomia - UL

Avaliação da crioinjúria em ovócitos imaturos e maturados in vitro e produção de embriões a partir de ovócitos bovinos vitrificados em Open Pulled Straw (OPS) e Cryotop

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Ciências Médicas, Programa de Pós-Graduação em Ciências Médicas, 2012.

Isolation of micropropagated strawberry endophytic bacteria and assessment of their potential for plant growth promotion.

Twenty endophytic bacteria were isolated from the meristematic tissues of three varieties of strawberry cultivated in vitro, and further identified, by FAME profile, into the genera Bacillus and Sphingopyxis. The strains were also characterized according to indole acetic acid production, phosphate solubilization and potential for plant growth promotion. Results showed that 15 strains produced high levels of IAA and all 20 showed potential for solubilizing inorganic phosphate. Plant growth promotion evaluated under greenhouse conditions revealed the ability of the strains to enhance the root number, length and dry weight and also the leaf number, petiole length and dry weight of the aerial portion. Seven Bacillus spp. strains promoted root development and one strain of Sphingopyxis sp. promoted the development of plant shoots. The plant growth promotion showed to be correlated to IAA production and phosphate solubilization. The data also suggested that bacterial effects could potentially be harnessed to promote plant growth during seedling acclimatization in strawberry

Bebidas espirituosas do Algarve

Tese de Doutoramento, Química, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2016

S-Alkylated/aralkylated 2-(1H-indol-3-yl-methyl)-1,3,4- oxadiazole-5-thiol derivatives. 1. Synthesis and characterization

Purpose: To synthesize and characterize S-alkylated/aralkylated 2-(1H-indol-3-ylmethyl)-1,3,4- oxadiazole-5-thiol derivatives. Methods: 2-(1H-indol-3-yl)acetic acid (1) was reacted with absolute ethanol and catalytic amount of sulfuric acid to form ethyl 2-(1H-indol-3-yl)acetate (2) which was transformed to 2-(1H-indol-3- yl)acetohydrazide (3) by refluxing with hydrazine hydrate in methanol. Ring closure reaction of 3 with carbon disulfide and ethanolic potassium hydroxide yielded 2-(1H-indol-3-ylmethyl)-1,3,4-oxadiazole-5- thiol (4) which was finally treated with alkyl/aralkyl halides (5a-u) in DMF and NaH to yield Salkylated/ aralkylated 2-(1H-indol-3-ylmethyl)-1,3,4-oxadiazole-5-thiols (6a-u). Structural elucidation was done by IR, 1H-NMR and EI-MS techniques Results: 2-(1H-indol-3-ylmethyl)-1,3,4-oxadiazole-5-thiol (4) was synthesized as the parent molecule and was characterized by IR and the spectrum showed peaks resonating at (cm-1) 2925 (Ar-H), 2250 (S-H ), 1593 (C=N ) and 1527 (Ar C=C ); 1H-NMR spectrum showed signals at δ 11.00 (s, 1H, NH-1ʹ), 7.49 ( br.d, J = 7.6 Hz, 1H, H-4\'), 7.37 (br.d, J = 8.0 Hz, 1H, H-7\'), 7.34 (br.s, 1H, H-2\'), 7.09 (t, J = 7.6 Hz, 1H, H-5\'), 7.00 (t, J = 7.6 Hz, 1H, H-6\') and 4.20 (s, 2H, CH2-10ʹ). EI-MS presented different fragments peaks at m/z 233 (C11H9N3OS)˙+ [M+2]+, 231 (C11H9N3OS)˙+ [M]+, 158 (C10H8NO)+, 156 (C10H8N2)˙+, 130 (C9H8N)+. The derivatives (6a-6u) were prepared and characterized accordingly. Conclusion: S-alkylated/aralkylated 2-(1H-indol-3-ylmethyl)-1,3,4-oxadiazole-5-thiols (6a-u) were successfully synthesized.

Post-CMOS compatible high-throughput fabrication of AIN-based piezoelectric microcantilevers

A post-complementary metal oxide semiconductor (CMOS) compatible microfabrication process of piezoelectric cantilevers has been developed. The fabrication process is suitable for standard silicon technology and provides low-cost and high-throughput manufacturing. This work reports design, fabrication and characterization of piezoelectric cantilevers based on aluminum nitride (AlN) thin films synthesized at room temperature. The proposed microcantilever system is a sandwich structure composed of chromium (Cr) electrodes and a sputtered AlN film. The key issue for cantilever fabrication is the growth at room temperature of the AlN layer by reactive sputtering, making possible the innovative compatibility of piezoelectric MEMS devices with CMOS circuits already processed. AlN and Cr have been etched by inductively coupled plasma (ICP) dry etching using a BCl3–Cl2–Ar plasma chemistry. As part of the novelty of the post-CMOS micromachining process presented here, a silicon Si (1 0 0) wafer has been used as substrate as well as the sacrificial layer used to release the microcantilevers. In order to achieve this, the Si surface underneath the structure has been wet etched using an HNA (hydrofluoric acid + nitric acid + acetic acid) based solution. X-ray diffraction (XRD) characterization indicated the high crystalline quality of the AlN film. An atomic force microscope (AFM) has been used to determine the Cr electrode surface roughness. The morphology of the fabricated devices has been studied by scanning electron microscope (SEM). The cantilevers have been piezoelectrically actuated and their out-of-plane vibration modes were detected by vibrometry.

Antipyretic, analgesic and anti-inflammatory activities of methanol extract of root bark of Acacia jacquemontii Benth (Fabaceae) in experimental animals

Purpose: To investigate the ethnomedicinal claims regarding the use of Acacia jacquemontii Benth. (Fabaceae) in fever, pain and inflammation. Methods: The methanol root bark extract (AJRBM) of the plant was used in the studies. Preliminary phytochemical screening of the extract was carried out according to established methods. Analgesic, anti-inflammatory and antipyretic activities were evaluated using acetic acid-induced writhing, carrageennan-induced rat paw edema and Brewer’s yeast-induced pyrexia models, respectively. The extract was administered at doses of 50 and 100 mg/kg. Aspirin (300 mg/kg, p.o.) was used as a reference drug in all models. Normal saline (10 mL/kg p.o.) was used as negative control. Results: Phytochemical screening results indicate the presence of cardioactive glycosides, tannins, flavonoids and saponins. In the acetic acid-induced writhing model, the methanol extract exhibited significant (p < 0.05) analgesic effect with 58.98 % reduction in writhing response at a dose of 100 mg/kg, compared with untreated control group. The extract significantly (p < 0.05) reduced carrageenan-induced edema at doses of 50 and 100 mg/kg to 36.84 and 47.36 %, respectively, after 1 h of extract administration. The extract exhibited predominantly dose-dependent antipyretic effect in Brewer’s yeast-induced pyrexia model. Maximum reduction in body temperature to 37.07 and 38.29 ºC at doses of 50 and 100 mg/kg, respectively, was observed, compared with untreated group (38.90 ºC) after 1 h, but this was not significant (p < 0.05). Conclusion: The plant extract exerts inhibitory effect on peripheral pain stimuli, edema and dosedependent anti-pyrexia, and thus justifies the ethnomedicinal use of Acacia jacquemontii Benth. in the management of pain, fever and inflammation.

In vivo analgesic activity and safety assessment of Vitis vinifera L and Punica granatum L fruits extracts

Purpose: To investigate the analgesic properties of fruit extracts of Vitis vinifera (grape) and Punica granatum (pomegranate) in Albino mal mice. Methods: The analgesic activity of fruit extracts of V. vinifera and P. granatum were examined in vivo using thermal stimulus assays (i.e., tail immersion and hot plate) and acetic acid-induced writhing test using acetylsalicylic acid (0.1 g/kg, per os) as standard. The extracts were administered orally in doses of 1.0, 2.0 and 3.0 g/kg. Results: In acetic acid writhes test, both fruit extract pretreatments (1.0, 2.0 and 3.0 g/kg, per os) significantly decreased the number of writhes (p < 0.0001) in a dose-dependent manner compared to control. The Index of Pain Inhibition (IPI) values following V. vinifera extract treatments were 36.52 % (1.0 g/kg), 66.67 % (2.0 g/kg) and 89.71 % (3.0 g/kg) which were significantly different from those for P. granatum extracts (45.39 %, 1.0 g/kg), 70.93 %, 2.0 g/kg) and 86.88 %, 3.0 g/kg) at equivalent doses of 2.0 and 3.0 g/kg of the extracts The fruit extracts of both species increased the reaction latency time. In tail-immersion assay, only the fruit extract of P. granatum significantly increased the response to heat stimulus at doses of 2.0 g/kg (p < 0.05). Conclusion: The hydroalcohol fruit extracts of P. granatum and V. vinifera have potential analgesic effects. Further studies are needed to determine the active component responsible for this effect.

Síntese de peptóides lineares e cíclicos via reação multicomponente de Ugi e cicloadição Azido/Alcino catalisada por cobre, realizada sob regime de fluxo contínuo

Tese (doutorado)–Universidade de Brasília, Instituto de Química, Programa de Pós-Graduação em Química, 2015.

PRODUCTION OF BIOFUEL INTERMEDIATES FROM WOODY FEEDSTOCKS VIA FAST PYROLYSIS AND TORREFACTION

The main objective of this research was to investigate pyrolysis and torrefaction of forest biomass species using a micropyrolysis instrument. It was found that 30-45% of the original sample mass remained as bio-char in the pyrolysis temperature range of 500 - 700˚C for aspen, balsam, and switchgrass. The non-char mass was converted to gaseous and vapor products, of which 10-55% was water and syngas, 2-12% to acetic acid, 2-12% to hydroxypropanone, 1-3% to furaldehyde, and 5-15% to various phenolic compounds. In addition, several general trends in the evolution of gaseous species were indentified when woody feedstocks were pyrolyzed. With increasing temperature it was observed that: (1) the volume of gas produced increased, (2) the volume of CO2 decreased and the volumes of CO and CH4 increased, and (3) the rates of gas evolution increased. In the range of torrefaction temperature (200 - 300˚C), two mechanistic models were developed to predict the rates of CO2 and acetic acid product formation. The models fit the general trend of the experimental data well, but suggestions for future improvement were also noted. Finally, it was observed that using torrefaction as a pre-curser to pyrolysis improves the quality of bio-oil over traditional pyrolysis by reducing the acidity through removal of acetic acid, reducing the O/C ratio by removal of some oxygenated species, and removing a portion of the water.

Caracterización paraclínica de trabajadores con patologías respiratorias de un centro de referencia neumológico, Bucaramanga, 2014-2016

Introducción: La enfermedad respiratoria ocupacional es causada por la exposición a diferentes agentes en el trabajo. Las pruebas objetivas realizadas en sospecha de enfermedad respiratoria de origen laboral, son importantes herramientas que permiten realizar un adecuado diagnóstico, una detección precoz de la enfermedad respiratoria ocupacional, disminuye el progreso rápido de la patología, la morbilidad de los trabajadores y el impacto negativo sobre su futuro laboral. Objetivo: Caracterizar las pruebas paraclínicas de las patologías respiratorias de trabajadores, en un centro de referencia neumológico de Bucaramanga año 2014-2016. Materiales y métodos: Se realizó un estudio descriptivo retrospectivo con datos secundarios de 96 trabajadores que laboran en diferentes actividades económicas. Se incluyeron variables sociodemográficas, laborales, ayudas imagenológicas y pruebas de función pulmonar, realizando 3 grupos de acuerdo a su patología que fueron: Asma, síndrome de disfunción reactiva de la vía aérea y neumoconiosis. En el análisis estadístico se emplearon medidas de tendencia central y dispersión. Resultados: De los 96 trabajadores 84.4% son hombres, las actividades económicas más frecuentes fueron la industria del petróleo y gas en un 27.1% y trabajadores en materiales de construcción en un 19.8%. En la caracterización paraclínica por grupo de patología, para asma predominó la obstrucción en la espirometría (46.9%) y los volúmenes pulmonares con atrapamiento aéreo (95.5%), en RADS (síndrome de disfunción de vías aéreas reactivas) los volúmenes pulmonares con atrapamiento aéreo (77%) y en las neumoconiosis para Rx de tórax (90.3%) y Tac de tórax (100%) reportaron alteraciones parenquimatosas, espirometría con obstrucción (54.8%) y volúmenes pulmonares con atrapamiento aéreo (62.5 %).Discusión y Conclusiones: Las ocupaciones de mayor riesgo para desarrollo de neumopatías de origen ocupacional fuero, , son la minería y construcción y para asma la agricultura y manufacturas. Para asma se evidenció que no hay significancia diagnóstica para estudios imagenológicos pero sí para las pruebas de función pulmonar. Para neumoconiosis el estudio imagenológico es el de mayor importancia ya que en las radiografías se presentan cambios incluso mucho antes de la afectación de la función pulmonar. Para RADS se concluyó que la realización de un test de provocación con metacolina sería el Gold estándar para el diagnóstico. Las pruebas de función respiratoria son de vital importancia para determinar la enfermedad ocupacional en trabajadores expuestos para vigilancia y detección precoz, es conveniente la realización de protocolos para la evaluación y diagnóstico de la enfermedad respiratoria de origen ocupacional. Palabras claves: Neumoconiosis, asma ocupacional, función pulmonar, radiografía de tórax, ocupación, Colombia.

Tracking biochemical changes during adventitious root formation in olive (Olea europaea L.)

The activity of oxidative enzymes and the levels of free auxins were determined during adventitious root formation in olive explants. Rooting trials were performed both with in vitro-cultured micro shoots of the cultivar ‘Galega Vulgar’, treated with indole-3-butyric acid (IBA) and with salicylhydroxamic acid(SHAM) + IBA, as well as with semi-hardwood cuttings of the cultivars ‘Galega Vulgar’ (difficult-to-root)and ‘Cobrançosa’ (easy-to-root), treated with IBA. The auxin (IBA) was used in all experiments as a rooting promoter, while SHAM was used in micropropagation trials as rooting inhibitor, providing a negative control. Free indole-3-acetic acid (IAA) and IBA concentrations were determined in microshoots, as well as in semi-hardwood cuttings, throughout the rooting period at pre-established time-points. At the sametime-points, the enzymatic activity of polyphenol oxidases (PPO), peroxidases (POX), and IAA oxidase(IAAox) was evaluated in the microshoots. Microshoots treated with SHAM + IBA revealed higher POX and IAAox activity, as well as lower PPO activity, than those treated only with IBA. IAA levels were higher in IBA-treated microshoots during induction phase, but lower during early initiation phase. Incontrast, free IBA levels were higher in microshoots treated with SHAM + IBA during induction, but lower during initiation. A similar pattern of free auxin levels was observed in semi-hardwood cuttings of the two contrasting cultivars under evaluation. The similarities found on the auxin patterns of microshoots treated with SHAM and those of semi-hardwood cuttings of the difficult-to-root olive cultivar allow considering SHAM a reliable control for when simulation of a difficult-to-root behavior is necessary. The inhibitory effect of SHAM in root formation could be related with 1) the inhibition of alternative oxidase(AOX), leading to a down regulation of phenylpropanoid biosynthetic pathways, which would decrease the concentration of phenolic substrates for PPO; 2) an increase in IAAox activity resulting in lower free IAA levels or; 3) a defective conversion of IBA into IAA.

Quantification of free auxins in semi-hardwood plant cuttings and microshoots by dispersive liquid–liquid microextraction/microwave derivatization and GC/MS analysis

Several studies have suggested that differences in the natural rooting ability of plant cuttings could be attributed to differences in endogenous auxin levels. Hence, during rooting experiments, it is important to be able to routinely monitor the evolution of endogenous levels of plant hormones. This work reports the development of a new method for the quantification of free auxins in auxin-treated Olea europaea (L.) explants, using dispersive liquid–liquid microextraction (DLLME) and microwave assisted derivatization (MAD) followed by gas chromatography/mass spectrometry (GC/MS) analysis. Linear ranges of 0.5–500 ng mL 1 and 1–500 mg mL 1 were used for the quantification of indole-3-acetic acid (IAA) and indole-3-butyric acid (IBA), respectively. Determined by serial dilutions, the limits of detection (LOD) and quantification (LOQ) were 0.05 ng mL 1 and 0.25 ng mL 1, respectively for both compounds. When using the calibration curve for determination, the LOQ corresponded to 0.5 ng mL 1 (IAA) and 0.5 mg mL 1 (IBA). The proposed method proved to be substantially faster than other alternatives, and allowed free auxin quantification in real samples of semi-hardwood cuttings and microshoots of two olive cultivars. The concentrations found in the analyzed samples are in the range of 0.131–0.342 mg g 1 (IAA) and 20–264 mg g 1 (IBA).

Adsorption of pesticides onto activated carbons from wood composites

A series of activated carbon was produced from particleboard and medium-density fibreboard monoliths, which are waste originated from the industry, and then characterized and evaluated for potential application for phenoxyacetic acids removals, such 2,4-dichlorophenoxyacetic acid (2,4-D), 2-methyl-4-chlorophenoxy acetic acid (MCPA) and 3-(3,4-dichlorophenyl)-1,1-dimethylurea (diuron), from the liquid phase. All AC retain the shape of the precursor, and displays a microporous structure well-developed, reaching 0.58 cm 3 g -1. The adsorption isotherms for three pesticides were obtained in the optimal conditions and the AC with high superficial area and micropore volume exhibited better performance, allowing to state that, this AC could be a great substitute of those habitually used for this purpose. The pesticides adsorption data were linearized using the Langmuir and Freundlich equation, being the first a very good fit to the experimental data.

Adsorption of pesticides onto activated carbons from wood composites

A series of activated carbon was produced from particleboard and medium-density fibreboard monoliths, which are waste originated from the industry, and then characterized and evaluated for potential application for phenoxyacetic acids removals, such 2,4-dichlorophenoxyacetic acid (2,4-D), 2-methyl-4-chlorophenoxy acetic acid (MCPA) and 3-(3,4-dichlorophenyl)-1,1-dimethylurea (diuron), from the liquid phase. All AC retain the shape of the precursor, and displays a microporous structure well-developed, reaching 0.58 cm 3 g -1. The adsorption isotherms for three pesticides were obtained in the optimal conditions and the AC with high superficial area and micropore volume exhibited better performance, allowing to state that, this AC could be a great substitute of those habitually used for this purpose. The pesticides adsorption data were linearized using the Langmuir and Freundlich equation, being the first a very good fit to the experimental data.