Questions and answers - copyright for work based learning

This Q and A provides an overview of copyright law and how it applies in a variety of scenarios relevant to work based learning (WBL) providers.

Scientific fisheries work in Maryland

Presentation to elected officials [and American Fisheries Society] on the wealth of research to be done in the Chesapeake Bay. Citing drop in oyster production from a high of 17,000,000 bushels in 1885 to 2,000,000 bushels in 1925 or one-eighth of its one-time abundance. Citing water studies through the late 1880's-90's. Report of experiments with the Japanese Oyster O. gigas. Also addresses Crab, Callinectes sapidus and classes held. (PDF contains 7 pages)

Effective and Robust Generalized Predictive Speed Control of Induction Motor

14 p.

Work and energy equations and the principle of generalized effective stress for unsaturated soils

The effective stress principle has been efficiently applied to saturated soils in the soil mechanics and geotechnical engineering practice; however, its applicability to unsaturated soils is still under debate. The appropriate selection of stress state variables is essential for the construction of constitutive models for unsaturated soils. Owing to the complexity of unsaturated soils, it is difficult to determine the deformation and strength behaviors of unsaturated soils uniquely with the previous single-effective-stress variable theory and two-effective-stress-variable theory in all the situations. In this paper, based on the porous media theory, the specific expression of work is proposed, and the effective stress of unsaturated soils conjugated with the displacement of the soil skeleton is further derived. In the derived work and energy balance equations, the energy dissipation in unsaturated soils is taken into account. According to the derived work and energy balance equations, all of the three generalized stresses and the conjugated strains have effects on the deformation of unsaturated soils. For considering these effects, a principle of generalized effective stress to describe the behaviors of unsaturated soils is proposed. The proposed principle of generalized effective stress may reduce to the previous effective stress theory of single-stress variable or the two-stress variables under certain conditions. This principle provides a helpful reference for the development of constitutive models for unsaturated soils.

Transceiver designs and analysis for LTI, LTV and broadcast channels - new matrix decompositions and majorization theory

Signal processing techniques play important roles in the design of digital communication systems. These include information manipulation, transmitter signal processing, channel estimation, channel equalization and receiver signal processing. By interacting with communication theory and system implementing technologies, signal processing specialists develop efficient schemes for various communication problems by wisely exploiting various mathematical tools such as analysis, probability theory, matrix theory, optimization theory, and many others. In recent years, researchers realized that multiple-input multiple-output (MIMO) channel models are applicable to a wide range of different physical communications channels. Using the elegant matrix-vector notations, many MIMO transceiver (including the precoder and equalizer) design problems can be solved by matrix and optimization theory. Furthermore, the researchers showed that the majorization theory and matrix decompositions, such as singular value decomposition (SVD), geometric mean decomposition (GMD) and generalized triangular decomposition (GTD), provide unified frameworks for solving many of the point-to-point MIMO transceiver design problems.

In this thesis, we consider the transceiver design problems for linear time invariant (LTI) flat MIMO channels, linear time-varying narrowband MIMO channels, flat MIMO broadcast channels, and doubly selective scalar channels. Additionally, the channel estimation problem is also considered. The main contributions of this dissertation are the development of new matrix decompositions, and the uses of the matrix decompositions and majorization theory toward the practical transmit-receive scheme designs for transceiver optimization problems. Elegant solutions are obtained, novel transceiver structures are developed, ingenious algorithms are proposed, and performance analyses are derived.

The first part of the thesis focuses on transceiver design with LTI flat MIMO channels. We propose a novel matrix decomposition which decomposes a complex matrix as a product of several sets of semi-unitary matrices and upper triangular matrices in an iterative manner. The complexity of the new decomposition, generalized geometric mean decomposition (GGMD), is always less than or equal to that of geometric mean decomposition (GMD). The optimal GGMD parameters which yield the minimal complexity are derived. Based on the channel state information (CSI) at both the transmitter (CSIT) and receiver (CSIR), GGMD is used to design a butterfly structured decision feedback equalizer (DFE) MIMO transceiver which achieves the minimum average mean square error (MSE) under the total transmit power constraint. A novel iterative receiving detection algorithm for the specific receiver is also proposed. For the application to cyclic prefix (CP) systems in which the SVD of the equivalent channel matrix can be easily computed, the proposed GGMD transceiver has K/log_2(K) times complexity advantage over the GMD transceiver, where K is the number of data symbols per data block and is a power of 2. The performance analysis shows that the GGMD DFE transceiver can convert a MIMO channel into a set of parallel subchannels with the same bias and signal to interference plus noise ratios (SINRs). Hence, the average bit rate error (BER) is automatically minimized without the need for bit allocation. Moreover, the proposed transceiver can achieve the channel capacity simply by applying independent scalar Gaussian codes of the same rate at subchannels.

In the second part of the thesis, we focus on MIMO transceiver design for slowly time-varying MIMO channels with zero-forcing or MMSE criterion. Even though the GGMD/GMD DFE transceivers work for slowly time-varying MIMO channels by exploiting the instantaneous CSI at both ends, their performance is by no means optimal since the temporal diversity of the time-varying channels is not exploited. Based on the GTD, we develop space-time GTD (ST-GTD) for the decomposition of linear time-varying flat MIMO channels. Under the assumption that CSIT, CSIR and channel prediction are available, by using the proposed ST-GTD, we develop space-time geometric mean decomposition (ST-GMD) DFE transceivers under the zero-forcing or MMSE criterion. Under perfect channel prediction, the new system minimizes both the average MSE at the detector in each space-time (ST) block (which consists of several coherence blocks), and the average per ST-block BER in the moderate high SNR region. Moreover, the ST-GMD DFE transceiver designed under an MMSE criterion maximizes Gaussian mutual information over the equivalent channel seen by each ST-block. In general, the newly proposed transceivers perform better than the GGMD-based systems since the super-imposed temporal precoder is able to exploit the temporal diversity of time-varying channels. For practical applications, a novel ST-GTD based system which does not require channel prediction but shares the same asymptotic BER performance with the ST-GMD DFE transceiver is also proposed.

The third part of the thesis considers two quality of service (QoS) transceiver design problems for flat MIMO broadcast channels. The first one is the power minimization problem (min-power) with a total bitrate constraint and per-stream BER constraints. The second problem is the rate maximization problem (max-rate) with a total transmit power constraint and per-stream BER constraints. Exploiting a particular class of joint triangularization (JT), we are able to jointly optimize the bit allocation and the broadcast DFE transceiver for the min-power and max-rate problems. The resulting optimal designs are called the minimum power JT broadcast DFE transceiver (MPJT) and maximum rate JT broadcast DFE transceiver (MRJT), respectively. In addition to the optimal designs, two suboptimal designs based on QR decomposition are proposed. They are realizable for arbitrary number of users.

Finally, we investigate the design of a discrete Fourier transform (DFT) modulated filterbank transceiver (DFT-FBT) with LTV scalar channels. For both cases with known LTV channels and unknown wide sense stationary uncorrelated scattering (WSSUS) statistical channels, we show how to optimize the transmitting and receiving prototypes of a DFT-FBT such that the SINR at the receiver is maximized. Also, a novel pilot-aided subspace channel estimation algorithm is proposed for the orthogonal frequency division multiplexing (OFDM) systems with quasi-stationary multi-path Rayleigh fading channels. Using the concept of a difference co-array, the new technique can construct M^2 co-pilots from M physical pilot tones with alternating pilot placement. Subspace methods, such as MUSIC and ESPRIT, can be used to estimate the multipath delays and the number of identifiable paths is up to O(M^2), theoretically. With the delay information, a MMSE estimator for frequency response is derived. It is shown through simulations that the proposed method outperforms the conventional subspace channel estimator when the number of multipaths is greater than or equal to the number of physical pilots minus one.

Topics in LIGO-related physics: interferometric speed meters and tidal work

In the quest to develop viable designs for third-generation optical interferometric gravitational-wave detectors, one strategy is to monitor the relative momentum or speed of the test-mass mirrors, rather than monitoring their relative position. The most straightforward design for a speed-meter interferometer that accomplishes this is described and analyzed in Chapter 2. This design (due to Braginsky, Gorodetsky, Khalili, and Thorne) is analogous to a microwave-cavity speed meter conceived by Braginsky and Khalili. A mathematical mapping between the microwave speed meter and the optical interferometric speed meter is developed and used to show (in accord with the speed being a quantum nondemolition observable) that in principle the interferometric speed meter can beat the gravitational-wave standard quantum limit (SQL) by an arbitrarily large amount, over an arbitrarily wide range of frequencies . However, in practice, to reach or beat the SQL, this specific speed meter requires exorbitantly high input light power. The physical reason for this is explored, along with other issues such as constraints on performance due to optical dissipation.

Chapter 3 proposes a more sophisticated version of a speed meter. This new design requires only a modest input power and appears to be a fully practical candidate for third-generation LIGO. It can beat the SQL (the approximate sensitivity of second-generation LIGO interferometers) over a broad range of frequencies (~ 10 to 100 Hz in practice) by a factor h/h_SQL ~ √W^(SQL)_(circ)/W_circ. Here W_circ is the light power circulating in the interferometer arms and W_SQL ≃ 800 kW is the circulating power required to beat the SQL at 100 Hz (the LIGO-II power). If squeezed vacuum (with a power-squeeze factor e^-2R) is injected into the interferometer's output port, the SQL can be beat with a much reduced laser power: h/h_SQL ~ √W^(SQL)_(circ)/W_circe^-2R. For realistic parameters (e^-2R ≃ 10 and W_circ ≃ 800 to 2000 kW), the SQL can be beat by a factor ~ 3 to 4 from 10 to 100 Hz. [However, as the power increases in these expressions, the speed meter becomes more narrow band; additional power and re-optimization of some parameters are required to maintain the wide band.] By performing frequency-dependent homodyne detection on the output (with the aid of two kilometer-scale filter cavities), one can markedly improve the interferometer's sensitivity at frequencies above 100 Hz.

Chapters 2 and 3 are part of an ongoing effort to develop a practical variant of an interferometric speed meter and to combine the speed meter concept with other ideas to yield a promising third- generation interferometric gravitational-wave detector that entails low laser power.

Chapter 4 is a contribution to the foundations for analyzing sources of gravitational waves for LIGO. Specifically, it presents an analysis of the tidal work done on a self-gravitating body (e.g., a neutron star or black hole) in an external tidal field (e.g., that of a binary companion). The change in the mass-energy of the body as a result of the tidal work, or "tidal heating," is analyzed using the Landau-Lifshitz pseudotensor and the local asymptotic rest frame of the body. It is shown that the work done on the body is gauge invariant, while the body-tidal-field interaction energy contained within the body's local asymptotic rest frame is gauge dependent. This is analogous to Newtonian theory, where the interaction energy is shown to depend on how one localizes gravitational energy, but the work done on the body is independent of that localization. These conclusions play a role in analyses, by others, of the dynamics and stability of the inspiraling neutron-star binaries whose gravitational waves are likely to be seen and studied by LIGO.

Energías renovables en edificación: aplicación al abastecimiento de energía eléctrica y climatización

[ES]Este documento tiene el objeto de presentar el uso de las energías renovables en la edificación actual, para ello se analizaran las energías que hay en el mercado, sus beneficios y sus posibles aplicaciones en viviendas, naves industriales, polideportivos, centro comerciales, etc. Para lograr alcanzar todas estas competencias se hará mayor hincapié en el uso de estas nuevas tecnologías en abastecimientos de energía eléctrica y climatización, teniendo en cuenta que no todas las energías renovables son aplicables a la edificación y que no todas las energías tienen las mismas utilidades. El trabajo se lleva a cabo dentro de los trabajos de fin de grado de la escuela técnica superior de ingeniería de Bilbao (ETSIB), más concretamente se refiere al trabajo tipo TFG.3. El trabajo también consta de los apartados descargo de costes y planificación, donde se analiza el desglose de los gastos empleados para la realización de esta memoria y el tiempo elaboración para el mismo. Para concluir es añaden anexos, en los cuales se explican varias de las Normas que se manejan en la actualidad y también se incluyen algunos catálogos de productos comerciales y sus dispositivos para colocar en el edificio.

Interrelated contributions to freshwater science over 78 years: A guide to published work from the Freshwater Biological Association, Institute of Freshwater Ecology and Centre for Ecology and Hydrology, 1929-2006

This article introduces a new listing of published scientific contributions from the Freshwater Biological Association (FBA) and its later Research Council associates – the Institute of Freshwater Ecology (1989–2000) and the Centre for Ecology and Hydrology (2000+). The period 1929–2006 is covered. The authors offer also information on specific features of the listing; also an outline of influences that underlay the research, and its scientific scope.

Metaphysics in the Work of Charles Darwin

It is not hard to see how two visions of nature are intertwined in Darwin’s Journal of Researches: one vision, the province of romantic authors depicting the sentiments awakened by certain landscapes, the other, the domain of natural scientists describing the world without reference to the aesthetic qualities of the scenery. Nevertheless, analyses of this double perspective in Darwin’s work are relatively rare. Most scholars focus on Darwin, the scientist, and more or less ignore the aesthetic aspects of his work. Perceiving the gradual transformation of Darwin’s world view, however, depends on analyzing the two different modes in which Darwin approached and perceived the world. While one can, on occasion, find commentaries on the beauty of the natural world in Darwin’s early work, the passage of time produces a modification in the naturalist’s manner of perceiving nature. This does not, however, mean that Darwin ceases to find beauty in nature; on the contrary, the disenchantment, in Max Weber’s words, that Darwin’s theory produces should not be understood in a pejorative, but rather in a literal sense. The theory of evolution, in effect, divests nature of its magical character and begins to explain it in terms of natural selection, according it, in the process a new and more intense attraction. In the present work, the metaphysical implications of this new vision of the world are analyzed through the eyes of its discoverer.

Metrologia de instrumentos endodônticos por microscopia eletrônica de varredura e análise digital de imagens: uma proposta metodológica

A padronização para a fabricação de instrumentos endodônticos em aço inoxidável contribuiu para o desenvolvimento de novos aspectos geométricos. Surgiram propostas de alterações no desenho da haste helicoidal, da seção reta transversal, da ponta, da conicidade e do diâmetro na extremidade (D0). Concomitantemente, o emprego de ligas em Níquel-Titânio possibilitou a produção de instrumentos acionados a motor, largamente empregados hoje. A cada ano a indústria lança instrumentos com diversas modificações, sem, contudo, disponibilizar informações suficientes quanto às implicações clínicas destas modificações. Existe um crescente interesse no estudo dos diferentes aspectos geométricos e sua precisa metrologia. Tradicionalmente, a aferição de aspectos geométricos de instrumentos endodônticos é realizada visualmente através de microscopia ótica. Entretanto, esse procedimento visual é lento e subjetivo. Este trabalho propõe um novo método para a metrologia de instrumentos endodônticos baseado no microscópio eletrônico de varredura e na análise digital das imagens. A profundidade de campo do MEV permite obter a imagem de todo o relevo do instrumento endodôntico a uma distância de trabalho constante. Além disso, as imagens obtidas pelo detector de elétrons retro-espalhados possuem menos artefatos e sombras, tornando a obtenção e análise das imagens mais fáceis. Adicionalmente a análise das imagens permite formas de mensuração mais eficientes, com maior velocidade e qualidade. Um porta-amostras específico foi adaptado para obtenção das imagens dos instrumentos endodônticos. Ele é composto de um conector elétrico múltiplo com terminais parafusados de 12 pólos com 4 mm de diâmetro, numa base de alumínio coberta por discos de ouro. Os nichos do conector (terminais fêmeas) têm diâmetro apropriado (2,5 mm) para o encaixe dos instrumentos endodônticos. Outrossim, o posicionamento ordenado dos referidos instrumentos no conector elétrico permite a aquisição automatizada das imagens no MEV. Os alvos de ouro produzem, nas imagens de elétrons retro-espalhados, melhor contraste de número atômico entre o fundo em ouro e os instrumentos. No porta-amostras desenvolvido, os discos que compõem o fundo em ouro são na verdade, alvos do aparelho metalizador, comumente encontrados em laboratórios de MEV. Para cada instrumento, imagens de quatro a seis campos adjacentes de 100X de aumento são automaticamente obtidas para cobrir todo o comprimento do instrumento com a magnificação e resolução requeridas (3,12 m/pixel). As imagens obtidas são processadas e analisadas pelos programas Axiovision e KS400. Primeiro elas são dispostas num campo único estendido de cada instrumento por um procedimento de alinhamento semi-automático baseado na inter-relação com o Axiovision. Então a imagem de cada instrumento passa por uma rotina automatizada de análise de imagens no KS400. A rotina segue uma sequência padrão: pré-processamento, segmentação, pós-processamento e mensuração dos aspectos geométricos.

Revisão anatômica e posicionamento filogenético das espécies de Ionoscopiformes (Actinopterygii: Holostei) do Cretáceo do nordeste do Brasil e de Puebla, México

Os gêneros de peixes fósseis Oshunia e Placidichthys são holósteos pertencentes à Ordem Ionoscopiformes e provenientes do Cretáceo Inferior do Brasil, das bacias do Araripe e de Tucano. No clado Ionoscopiformes sensu Grande & Bemis (1998) estão incluídas as famílias Ionoscopidae e Ophiopsidae, todavia as relações internas deste grupo ainda são duvidosas. Oshunia e Placidichthys fazem parte das famílias Ionoscopidae e Ophiopsidae, respectivamente, sendo o gênero Oshunia considerado como mono-específico (cf., O. brevis), enquanto que Placidichthys apresenta duas espécies nominais (cf., P. bidorsalis e P. tucanensis). Em função destas espécies terem sido descritas a partir de poucos espécimes, ainda existiam várias lacunas no conhecimento em relação as mesmas, como, por exemplo, a possibilidade da existência de outras espécies no gênero Oshunia e a falta de informações anatômicas, especialmente do crânio, da região occipital, dos ossos da face e da nadadeira caudal das espécies de Placidichthys. Outro ponto em aberto na literatura era a posição filogenética dos dois gêneros. Frente a estas questões, o objetivo da presente dissertação foi realizar uma revisão anatômica dos gêneros Oshunia e Placidichthys, a fim de ampliar o conhecimento anatômico e taxonômico acerca dos mesmos, além realizar uma análise filogenética da Ordem Ionoscopiformes, baseada em matrizes de caracteres existentes na literatura, para se obter um melhor posicionamento dessas espécies brasileiras. Em função da facilidade de acesso a material mexicano, também foram incluídos nesta revisão os gêneros Teoichthys e Tuetzalichthys provenientes do Cretáceo da Formação Tlayúa, estes também peixes fósseis holósteos pertencentes à Ordem Ionoscopiformes. Do ponto de vista taxonômico, não foi possível confirmar a existência de novas espécies para o gênero Oshunia, entretanto ficou clara a presença de uma nova espécie pertencente ao gênero mexicano Teoichthys. A presente revisão proporcionou uma série de novas informações sobre a anatomia destas espécies de Ionoscopiformes, tais como a descrição dos ossos circumorbitais e do teto craniano e uma reinterpretação acerca da nadadeira dorsal de Placidichthys bidorsalis, ou ainda sobre a forma do rostral de Teoichthys kallistos. Da mesma maneira, esta revisão também ofereceu novos dados para a construção de uma nova hipótese filogenética para Ionoscopiformes, a qual se mostrou consideravelmente distinta das hipóteses filogenéticas anteriores (cf., relações internas de Ionoscopidae e o posicionamento do gênero Teoichthys). O baixo suporte para grande parte dos clados torna evidente a fragilidade das hipóteses de relacionamento interno do clado Ionoscopiformes, bem como a necessidade de uma revisão mais aprofundada das outras espécies deste grupo e dos caracteres a serem utilizados em futuras análises filogenéticas.