Rakennuksen tietomallien hyödyntämisen edellytykset rakentamisen valmistelu- ja rakennusvaiheessa

Työn tavoitteena oli tutkia, kuinka rakennuksen tietomallia voidaan hyödyntää rakennusliikkeen tuotannonsuunnittelu- ja rakennusvaiheessa sekä mitä sen hyödyntäminen edellyttää rakennuksen tietomallin informaatiosisällöltä. Tavoitteena oli myös tunnistaa tuotannonohjauksen ”pullonkauloja”, joissa kohdin toimintaa voitaisiin tietomallien avulla tehostaa. Työn teoreettisena taustana on aineettoman pääoman merkitys yrityksen kilpailuedun luojana, tietämyksen hallinta ja teknologian hyödyntäminen tietämyksen hallinnassa. Työssä tutkittiin rakennustuotannon johtamista ja tietomallintamisen hyödyntämistä rakentamisessa sekä tietomallien hyödynnettävyyden varmistamista yleisellä tasolla. Työssä tutustuttiin kohdeyritykseen tuotannonohjaukseen ja rakennusvaiheen tietomallien hyödyntämisen nykytilaan. Tuloksina voidaan todeta, että tietomallien tuotannonsuunnittelu- ja rakennusvaiheen tietomallien hyödyntämisen perusedellytys on tietomallien oikeellisuus sekä tietomallien ja perinteisten suunnitteludokumenttien yhdenmukainen tietosisältö. Tämän lisäksi tarvitaan suunnitellut toimintatavat ja toimivat tiedonjakelukanavat sekä kyky hyödyntää tieto- ja viestintäteknologiaa. Tietomallit eivät tämän tutkimuksen perusteella näytä luoneen tarvetta uudenlaisille tuotanto-organisaation roolituksille. Tietomalleilla uskotaan olevan positiivisia vaikutuksia rakennusvaiheen muutostenhallinnassa. Tuotantoorganisaation henkilöillä oli positiivisia odotuksia tietomallien hyödyntämisestä tuotannonohjauksessa. Tietomallien odotetaan tukevan erillisten suunnitelmien muodostamien kokonaisuuksien hahmottamista, rakennusvaiheen osapuolten yhteistyötä ja töiden yhteensovitusta sekä logistiikan suunnittelua ja vaikutusten havainnointia.

Johtamisen keinot tiimien tiedonvaihdon ja oppimisen edistämiseksi logistiikkayrityksessä

Tämän päivän nopeasti muuttuvassa toimintaympäristössä tiedon ja oppimisen merkitys korostuu. Tiimityön lisäännyttyä on tiimien oppiminen merkittävä osa organisaation oppimista. Tässä tutkimuksessa tiimien oppimista tarkastellaan työssäoppimisen kautta. Tutkimuksen case –yrityksenä on logistiikkayritys. Tutkimuksen empiirinen osuus toteutettiin teemahaastatteluin. Haastateltavia oli yhteensä kaksitoista henkilöä. Haastatteluissa olivat edustettuina tuotannon työntekijät, toimihenkilöt ja esimiehet. Tutkimuksen tuloksina havaittiin, että johdon ja esimiesten rooli on äärimmäisen tärkeä tiimien oppimisen edistämisen kannalta. Johto voi edistää tiimien oppimista osoittamalla kiinnostusta ja luottamusta tiimien työtä kohtaan, sitoutumalla oppimisen mahdollistamiseen ja kannustamalla tiimejä oppimaan myös omalla esimerkillään.

Container logistic innovations in forest-energy sector: Markets, future service concepts and technical improvements

The report presents the results of the commercialization project called the Container logistic services for forest bioenergy. The project promotes new business that is emerging around overall container logistic services in the bioenergy sector. The results assess the European markets of the container logistics for biomass, enablers for new business creation and required service bundles for the concept. We also demonstrate the customer value of the container logistic services for different market segments. The concept analysis is based on concept mapping, quality function deployment process (QFD) and business network analysis. The business network analysis assesses key shareholders and their mutual connections. The performance of the roadside chipping chain is analysed by the logistic cost simulation, RFID system demonstration and freezing tests. The EU has set the renewable energy target to 20 % in 2020 of which Biomass could account for two-thirds. In the Europe, the production of wood fuels was 132.9 million solid-m3 in 2012 and production of wood chips and particles was 69.0 million solidm3. The wood-based chips and particle flows are suitable for container transportation providing market of 180.6 million loose- m3 which mean 4.5 million container loads per year. The intermodal logistics of trucks and trains are promising for the composite containers because the biomass does not freeze onto the inner surfaces in the unloading situations. The overall service concept includes several packages: container rental, container maintenance, terminal services, RFID-tracking service, and simulation and ERP-integration service. The container rental and maintenance would provide transportation entrepreneurs a way to increase the capacity without high investment costs. The RFID-concept would lead to better work planning improving profitability throughout the logistic chain and simulation supports fuel supply optimization.

Tuotannonohjausmallin kehitys asiantuntijaorganisaatioon

Tässä diplomityössä tutkitaan sitä, miten kehitetään asiantuntijaorganisaatioon soveltuvaa tuotannonohjausmallia, jota käytettäisiin pääasiassa työkaluna asiantuntijatyön ohjauksessa. Kehitettävän mallin logiikan ja rakenteen tulisi tuottaa mitattavissa olevaa tietoa, jota pystytään käyttämään päätöksenteon tukena. Tutkimuksen tuloksena havaittiin, että asiantuntijatuotannon johtamisessa vanhojen perinteisten teollisuuden johtamismallien avulla johtaminen voi tuoda pelkkää haittaa ja työntekijöiden motivaatio laskee. Asiantuntija tarvitsee signaaleja työn tuottavuudesta ja säännöllistä läpikäyntiä johtajansa kanssa. Tuloksena saatiin erilaisia Excel-pohjaisia työkaluja, joiden malleja voidaan käyttää myös tulevaisuudessa yrityksen tuotantojärjestelmissä.

How Lean Six Sigma and Agile principles optimize ITIL-based processes

Imagine the potential implications of an organization whose business and IT processes are well aligned and are capable of reactively and proactively responding to the external and internal changes. The Philips IT Infrastructure and Operations department (I&O) is undergoing a series of transformation activities to help Philips business keeping up with the changes. I&O would serve a critical function in any business sectors; given that the I&O’s strategy switched from “design, build and run” to “specify, acquire and performance manage”, that function is amplified. In 2013, I&O’s biggest transforming programme I&O Futures engaged multiple interdisciplinary departments and programs on decommissioning legacy processes and restructuring new processes with respect to the Information Technology Internet Library (ITIL), helping I&O to achieve a common infrastructure and operating platform (CI&OP). The author joined I&O Futures in the early 2014 and contributed to the CI&OP release 1, during which a designed model Bing Box and its evaluations were conducted through the lens of six sigma’s structured define-measure-analyze-improve-control (DMAIC) improvement approach. This Bing Box model was intended to firstly combine business and IT principles, namely Lean IT, Agile, ITIL best practices, and Aspect-oriented programming (AOP) into a framework. Secondly, the author implemented the modularized optimization cycles according to the defined framework into Philips’ ITIL-based processes and, subsequently, to enhance business process performance as well as to increase efficiency of the optimization cycles. The unique of this thesis is that the Bing Box model not only provided comprehensive optimization approaches and principles for business process performance, but also integrated and standardized optimization modules for the optimization process itself. The research followed a design research guideline that seek to extend the boundaries of human and organizational capabilities by creating new and innovative artifacts. The Chapter 2 firstly reviewed the current research on Lean Six Sigma, Agile, AOP and ITIL, aiming at identifying the broad conceptual bases for this study. In Chapter 3, we included the process of constructing the Bing Box model. The Chapter 4 described the adoption of Bing Box model: two-implementation case validated by stakeholders through observations and interviews. Chapter 5 contained the concluding remarks, the limitation of this research work and the future research areas. Chapter 6 provided the references used in this thesis.

Phenolic content and antioxidant capacity in organically and conventionally grown eggplant (Solanum melongena) fruits following thermal processing

AbstractThermal processing and production practices used in vegetables can cause changes in their phytochemical contents. Eggplant is characterized by its high antioxidant content. The objective of this work was to determine levels of anthocyanins, polyphenols, and flavonoids and antioxidant capacity in organically and conventionally grown eggplant prepared fresh or subjected to one of three thermal preparation methods: boiling, baking or steaming. The soluble and hydrolyzable polyphenols and flavonoids content were quantified by Folin-Ciocalteu and Aluminum chloride methods, respectively. Anthocyanins were quantified according to the pH differential method. Antioxidant capacity was determined by DPPH and ORAC methods. The results showed differences between organic and conventional eggplant for some variables although cultivation method did not have a consistent effect. Hydrolysable polyphenol content was greater, and soluble and hydrolysable antioxidant capacities were higher in organically grown eggplant, while anthocyanin content was greater in conventionally grown eggplant. Fresh eggplant produced under conventional cultivation had a much greater content of anthocyanins compared to that of other cultivation method-thermal treatment combination. In general, steamed eggplant contained higher total polyphenol and flavonoid levels as well as greater antioxidant capacity. Steamed eggplant from both conventional and organic systems also had high amounts of anthocyanins compared to other thermal treatments.

Food production in solidarity economy: an issue that goes beyond laws

Abstract Food production within the context of solidarity economy is an alternative way to offer employment and income for a significant part of the Brazilian population. The purpose of this study was to carry out a business diagnosis in order to evaluate the facilities, the production process and hygiene practices of seven solidarity economy enterprises located in the city of Novo Hamburgo, Southern Brazil, that work with food production and sales. Visits took place at the enterprises and a check-list was used to record data. Although food production happens in places with space and setting restrictions, it guarantees distinctive foods with aggregate value, where handlers follow the whole process, from raw materials selection to sales. Basic hygiene principles are followed, as they guarantee the production of food with quality, which contributes towards income generation for participating families. Specific laws that apply to the characteristics and needs of small-scale food production must be written in order to regulate solidarity economy enterprises.

Production of magnesium carbonates from serpentinites for CO2 mineral sequestration : optimisation towards industrial application

Global warming is one of the most alarming problems of this century. Initial scepticism concerning its validity is currently dwarfed by the intensification of extreme weather events whilst the gradual arising level of anthropogenic CO2 is pointed out as its main driver. Most of the greenhouse gas (GHG) emissions come from large point sources (heat and power production and industrial processes) and the continued use of fossil fuels requires quick and effective measures to meet the world’s energy demand whilst (at least) stabilizing CO2 atmospheric levels. The framework known as Carbon Capture and Storage (CCS) – or Carbon Capture Utilization and Storage (CCUS) – comprises a portfolio of technologies applicable to large‐scale GHG sources for preventing CO2 from entering the atmosphere. Amongst them, CO2 capture and mineralisation (CCM) presents the highest potential for CO2 sequestration as the predicted carbon storage capacity (as mineral carbonates) far exceeds the estimated levels of the worldwide identified fossil fuel reserves. The work presented in this thesis aims at taking a step forward to the deployment of an energy/cost effective process for simultaneous capture and storage of CO2 in the form of thermodynamically stable and environmentally friendly solid carbonates. R&D work on the process considered here began in 2007 at Åbo Akademi University in Finland. It involves the processing of magnesium silicate minerals with recyclable ammonium salts for extraction of magnesium at ambient pressure and 400‐440⁰C, followed by aqueous precipitation of magnesium in the form of hydroxide, Mg(OH)2, and finally Mg(OH)2 carbonation in a pressurised fluidized bed reactor at ~510⁰C and ~20 bar PCO2 to produce high purity MgCO3. Rock material taken from the Hitura nickel mine, Finland, and serpentinite collected from Bragança, Portugal, were tested for magnesium extraction with both ammonium sulphate and bisulphate (AS and ABS) for determination of optimal operation parameters, primarily: reaction time, reactor type and presence of moisture. Typical efficiencies range from 50 to 80% of magnesium extraction at 350‐450⁰C. In general ABS performs better than AS showing comparable efficiencies at lower temperature and reaction times. The best experimental results so far obtained include 80% magnesium extraction with ABS at 450⁰C in a laboratory scale rotary kiln and 70% Mg(OH)2 carbonation in the PFB at 500⁰C, 20 bar CO2 pressure for 15 minutes. The extraction reaction with ammonium salts is not at all selective towards magnesium. Other elements like iron, nickel, chromium, copper, etc., are also co‐extracted. Their separation, recovery and valorisation are addressed as well and found to be of great importance. The assessment of the exergetic performance of the process was carried out using Aspen Plus® software and pinch analysis technology. The choice of fluxing agent and its recovery method have a decisive sway in the performance of the process: AS is recovered by crystallisation and in general the whole process requires more exergy (2.48–5.09 GJ/tCO2sequestered) than ABS (2.48–4.47 GJ/tCO2sequestered) when ABS is recovered by thermal decomposition. However, the corrosive nature of molten ABS and operational problems inherent to thermal regeneration of ABS prohibit this route. Regeneration of ABS through addition of H2SO4 to AS (followed by crystallisation) results in an overall negative exergy balance (mainly at the expense of low grade heat) but will flood the system with sulphates. Although the ÅA route is still energy intensive, its performance is comparable to conventional CO2 capture methods using alkanolamine solvents. An energy‐neutral process is dependent on the availability and quality of nearby waste heat and economic viability might be achieved with: magnesium extraction and carbonation levels ≥ 90%, the processing of CO2‐containing flue gases (eliminating the expensive capture step) and production of marketable products.

Developing asset management in district heating and cooling business in a large energy company

The purpose of this Master´s Thesis is to develop asset management and its practices in case company. District heating and cooling systems operated by case company around Finland, Sweden, Poland and the Baltics form an enormous-sized asset base where some parts are starting to reach their end of life-cycles. Large-sized asset renewal actions are under discussion and maintenance spending is increasing. Financially justified decisions in changing business environment are needed. Asset management is one of the most important concepts for production organization which operates with capital-intensive production assets. Organizations profitability is highly dependent on assets´ performance. Such assets, like district heating and cooling systems, should be utilized as efficiently as possible within their life-cycles but also maintained and renewed optimally. In this qualitative thesis, empirical interview study was conducted to describe the current situation on how the assets are managed in the case company and to examine the readiness to implement a new, risk-based solution. Asset management revealed to be a very well-known concept. From proposed risk-based asset management point of view, several key observations were made. It was seen as a suitable solution, but further development will be needed. Based on the need and findings, several key processes and frameworks were created and also tested with a case study. Assets` condition monitoring should be improved, which would have a positive impact on event probability assessment. Risk acceptance is also a thing to be discussed further. When the evaluation becomes fluent in single investment cases, portfolio-level expansion should be considered and started. As a result, thesis proposes a solution how risk-based asset management could be performed practically in a capital-intensive case company in order to optimize the maintenance spending in a long run. Created practical framework is made universal: similar principles can be applied into multiple cases in case company but also in other energy companies. Risk-based asset management`s benefits could be utilized best in portfolio-level optimization where the capital would be invested to the most important objects from total risk point of view. Eventually, such approach would allow case company to optimize capital spending in a situation where funds are not adequate to cover all the mandatory needs and prioritization between the investment alternatives will truly be needed.

Ethical leadership as a way to promote work-related well-being

The purpose of this study was to clarify the connections of ethical leadership with the work-related well-being of employees. Additionally, the role of occupational health care in ethical leadership that promotes work-related well- being was analyzed. The objective of the study was to produce knowledge to support the development of ethical leadership and work-related well-being as well as to find ways for occupational health care to support organizations in these actions. The target groups of this study consisted of the managers (N=43) and employees (N=336) working in one organization in the Finnish energy industry. The population was studied in November 2014 using census. The data was gathered with two different web-based surveys containing structured and open questions. The survey for managers consisted of background questions and statements concerning ethical leadership, work-related well-being and occupational health care. The employee questionnaire consisted of questions about background and statements about work-related well-being and ethical leadership. The structured questions were analyzed with SPSS Statistical Program and the open questions using inductive content analysis. At least 80 % of the managers saw their actions as ethical in all but one part of ethical leadership. The work-related well-being of the employees was found best in the area of ability to work (91 % agreed) and lowest in the area of experience of ethical leadership (67 % agreed). The results showed a strong positive connection between ethical leadership and all the components of work- related well-being. The managers and employees were generally quite happy with the services of occupational health care but managers saw some problems with the collaboration with occupational health care. Several ways to improve work-related well-being and collaboration with occupational health care were found. One of the most important things was thought to be offering ways to maintain ability to work and making these actions visible. Investing in ethical leadership and work-related well-being is extremely important for the success of an organization and the societal benefits cannot be forgotten either. The role of occupational health care in promoting the health and well-being of employees is substantial. Occupational health care should offer managers more tools to recognize difficult situations and acting in them as well as encourage managers to seek help from occupational health care without hesitation in problematic situations of leadership.

Ethical leadership as a way to promote work-related well-being

The purpose of this study was to clarify the connections of ethical leadership with the work-related well-being of employees. Additionally, the role of occupational health care in ethical leadership that promotes work-related well- being was analyzed. The objective of the study was to produce knowledge to support the development of ethical leadership and work-related well-being as well as to find ways for occupational health care to support organizations in these actions. The target groups of this study consisted of the managers (N=43) and employees (N=336) working in one organization in the Finnish energy industry. The population was studied in November 2014 using census. The data was gathered with two different web-based surveys containing structured and open questions. The survey for managers consisted of background questions and statements concerning ethical leadership, work-related well-being and occupational health care. The employee questionnaire consisted of questions about background and statements about work-related well-being and ethical leadership. The structured questions were analyzed with SPSS Statistical Program and the open questions using inductive content analysis. At least 80 % of the managers saw their actions as ethical in all but one part of ethical leadership. The work-related well-being of the employees was found best in the area of ability to work (91 % agreed) and lowest in the area of experience of ethical leadership (67 % agreed). The results showed a strong positive connection between ethical leadership and all the components of work- related well-being. The managers and employees were generally quite happy with the services of occupational health care but managers saw some problems with the collaboration with occupational health care. Several ways to improve work-related well-being and collaboration with occupational health care were found. One of the most important things was thought to be offering ways to maintain ability to work and making these actions visible. Investing in ethical leadership and work-related well-being is extremely important for the success of an organization and the societal benefits cannot be forgotten either. The role of occupational health care in promoting the health and well-being of employees is substantial. Occupational health care should offer managers more tools to recognize difficult situations and acting in them as well as encourage managers to seek help from occupational health care without hesitation in problematic situations of leadership.

An examination of learning resulting from a transition from a directed to a self-directed work environment

~ This study focuses on the process of self-directed learning that individuals go through as they adapt to new work situations. This is a study of how one critical incident, specifically the transition from a traditional office structure to a home office structure, affected employees and what their learning process was as they adapted to the new environment. This study has 3 educational foundations: adult learning, self-directed learning, and the social context from which the learning will occur. Six women and 2 men were interviewed approximately 1 year following the transition. Analysis of the data revealed 5 themes of: impacts of the self-directed environment on participants' personal lives, their roles, skill set, productivity, and the physical environment; support offered by the organization, family, and office administration; personal development, specific learning needs, and personal skills; boundaries as they relate to family and work; and skill set and orientation requirements of new home office employees. The findings revealed the learning processes of the 8 participants. The learning processes of these participants were discussed within a theoretical framework of the learners, their immediate surroundings, and the larger social environment. The results indicated that the transition from a directed work environment to a self directed work environment is a complex, interrelated process. An element found throughout the theoretical framework is that of control. A second critical element is the need for participants to have a clearly defined work role and an opportunity to engage in discussion with peers and the community. Further findings reinforced the importance of climate and found that the physical environment is a key factor in a successful selfdirected work environment. The findings of this study revealed that no one factor makes an individual function successfully in a self-directed work environment, but that it is a complex interplay among the leamer, their immediate surroundings, and the social environment that will have the greatest impact on success. Recommendations are made which can be used to guide organizational leaders in facilitating employees' transition from a directed to a self-directed work environment. Additionally, recommendations are made for further research in the area of self-directed work environments.

The impact of meaningfulness of and responsibility for work on the relationships among work values, organizational commitment, and job satisfaction for part- time faculty in a community college

One hundred and thirty four subjects participated in this survey. Quantitative data were obtained and correlational analyses were used to test a model to study the relationships among the achievement of work values and organizational commitment and job satisfaction and to identify the moderating effects of the meaningfulness of work and responsibility for work on these relationships. Part-time faculty in the Faculty of Continuing Education of a community college were mailed a questionnaire on all the variables of the model. Several reliable, valid instruments were used to test the variables. Data analysis through Pearson correlation and stepwise multiple regression analyses revealed that the achievement of the work values of recognition and satisfaction with promotions did predict organizational commitment and job satisfaction, although the moderating effects of the meaningfulness of work and responsibility for work was not supported in this study. This study suggests that the revised model may be used for determining the relationships between the achievement of work values and organizational commitment and job satisfaction in a community college setting.

The physical environment and organizational behavior

Research into organizational behaviour has indicated that there is an inevitable conflict between the needs of the individual and organizational demands. Psychologists have given insights into basic individual needs and contend that satisfaction of these needs constitutes a motivating force which enhances desired behavioural patterns. Behaviouralists have suggested that a basic and pervasive individual need is the culturally determined need for privacy. Anthropologists and environmental psychologists have shown that man's spatial behaviour is observable and predictable and that changes in the physical environment or the way it is perceived are accompanied by concommitant changes in behaviour. Research findings from each of the disciplines have been reviewed in an attempt to show that the physical environment is a significant factor in satisfying the needs of the individual organizational member, hence, a significant influence on organizational behaviour. A model has been generated to show the relationship between the physical setting and behaviour and to underscore the importance of making provisions within the physical setting for the attainment of a culturally determined optimal level of privacy. The physical setting, by providing for this need, becomes a significant factor in reducing the conflict between the individual and the organization and makes for acceptable role behaviour and the fulfilment of organizational goals.

Postcolonial entanglements of Power, Race, Class and Privilege in Child and Youth Care Work Within a Brazilian Favela

This research assesses the various aspects of Child and Youth Care (CYC) work and how relationships between child or youth and care provider are limited and constricted within greater political, social and historical contexts. Specifically, this research takes place internationally in Rio de Janeiro, Brazil within a favela (slum) and unveils the entangled and complex relationship that I, not only as an ethnographer, but also as a CYC worker had with the many young people that I encountered. It will address a variety of theories that demonstrate the potentials of reproducing oppressive relationships, and argue that it is imperative for CYC workers to critically reflect on the greater contexts in which their work is situated in order to gain forces with those young people whom they are attempting to serve.