Dimensionamento de betões autocompactáveis coloridos com agregados britados vulcânicos

A incorporação de pigmentos na composição do betão é uma técnica aplicada como alternativa arquitetónica à pintura ou colocação de revestimentos em edifícios. Tratando-se de um betão à vista importa considerar cuidados adicionais na sua aplicação para assegurar a homogeneidade e qualidade do acabamento superficial. Utilizando betões autocompactáveis, não só a homogeneidade do material é aumentada devido à eliminação da compactação, como também o acabamento superficial é melhorado devido à maior capacidade de preenchimento dos moldes que estes betões apresentam. Neste trabalho dimensionam-se cinco composições de betão autocompactável colorido utilizando agregados britados vulcânicos correntemente utilizados no fabrico de betão na Região Autónoma da Madeira. Para o dimensionamento dos betões, realizaram-se vários estudos em pastas, de seguida em argamassas e finalmente em betões. Com o estudo das pastas obtiveram-se as primeiras informações sobre o efeito da introdução de pigmentos. Depois estudaram-se argamassas que continham o mesmo volume de areia relativo mas incorporando pastas com diferentes cores. Identificaram-se as pastas que conduziam a argamassas com propriedades reológicas semelhantes às da argamassa da composição considerada como referência. Nos betões começou-se por produzir uma composição de betão autocompactável de referência que foi caracterizada em termos de autocompactabilidade pelos ensaios de espalhamento, caixa L, funil V e segregação. Finalmente, realizaram-se composições de betões coloridos cujos conteúdos em agregados e finos eram os mesmos que os da composição de referência mas substituindo parcialmente o volume de água por igual volume de pigmentos. Os resultados mostraram que a incorporação de pigmentos conduz a uma ligeira perda de trabalhabilidade, sendo essa perda de trabalhabilidade facilmente compensada com um aumento da dosagem de superplastificante, cujo volume adicionado é substituído pela remoção de igual volume de água.

Methodology of photic stimulation revisited:updated European algorithm for visual stimulation in the EEG laboratory

Intermittent photic stimulation (IPS) is a common procedure performed in the electroencephalography (EEG) laboratory in children and adults to detect abnormal epileptogenic sensitivity to flickering light (i.e., photosensitivity). In practice, substantial variability in outcome is anecdotally found due to the many different methods used per laboratory and country. We believe that standardization of procedure, based on scientific and clinical data, should permit reproducible identification and quantification of photosensitivity. We hope that the use of our new algorithm will help in standardizing the IPS procedure, which in turn may more clearly identify and assist monitoring of patients with epilepsy and photosensitivity. Our algorithm goes far beyond that published in 1999 (Epilepsia, 1999a, 40, 75; Neurophysiol Clin, 1999b, 29, 318): it has substantially increased content, detailing technical and logistical aspects of IPS testing and the rationale for many of the steps in the IPS procedure. Furthermore, our latest algorithm incorporates the consensus of repeated scientific meetings of European experts in this field over a period of 6 years with feedback from general neurologists and epileptologists to improve its validity and utility. Accordingly, our European group has provided herein updated algorithms for two different levels of methodology: (1) requirements for defining photosensitivity in patients and in family members of known photosensitive patients and (2) requirements for tailored studies in patients with a clear history of visually induced seizures or complaints, and in those already known to be photosensitive.

Contribuição na caracterização de agregados comercializados no Rio Grande do Norte com ênfase na reação álcali-agregado

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES

Segmentação fuzzy de objetos tridimensionais com propriedades texturais

Digital image segmentation is the process of assigning distinct labels to different objects in a digital image, and the fuzzy segmentation algorithm has been used successfully in the segmentation of images from several modalities. However, the traditional fuzzy segmentation algorithm fails to segment objects that are characterized by textures whose patterns cannot be successfully described by simple statistics computed over a very restricted area. In this paper we present an extension of the fuzzy segmentation algorithm that achieves the segmentation of textures by employing adaptive affinity functions as long as we extend the algorithm to tridimensional images. The adaptive affinity functions change the size of the area where they compute the texture descriptors, according to the characteristics of the texture being processed, while three dimensional images can be described as a finite set of two-dimensional images. The algorithm then segments the volume image with an appropriate calculation area for each texture, making it possible to produce good estimates of actual volumes of the target structures of the segmentation process. We will perform experiments with synthetic and real data in applications such as segmentation of medical imaging obtained from magnetic rosonance

A plasticidade acústica de uma população de Boto - Cinza, Sotalia Guianensis (Van Banédén, 1864) (Cetacea, Delphinidae), na região Nordeste do Brasil

The environmental characteristics can modify the acoustics of a species due to habitat, time of day and year. Therefore, this study investigated the relationships between seasons, tide, daily cycle of tides, times of day and different habitat and noise emission of S. guianensis. Sound recordings occurred in the Curral’s Cove and Lagoon Complex of Guaraíras (CLG) in the municipality of Tibau do Sul/RN. Whistles are emitted with lower frequency during rainy season and spring tide while clicks are higher; whistles, clicks and calls have higher frequency during ebb tide. These modifications can be related with turbidity and prey availability. The whistles and clicks occurrence are higher at night probably because luminosity is lower. Furthermore, the whistles and clicks frequency reduction overnight allows the sound to travel longer distance and helps the view which is limited; but the minimum frequency increase was needed to catch the prey. The low occurrence of calls could be related to the small group size. The acoustic changes at night may be partly influenced by light levels as prey availability that is larger in this period. Whistle frequencies and click initial frequency are higher in CLG than Curral’s cove that permitted good precision. However, click central frequency is lower and may be connected to tracking the area. Several factors may be associated with such modifications as background noise, bottom and others. This study supports the hypothesis that S. guianensis presents an acoustic plasticity according to the local conditions where the species is embedded and adapts to the environmental changes.

Caracterização de água de lavagem de filtros em estações de tratamento de água de filtração direta

The water supply and treatment is considered as a great benefit considering that, if done efficiently, provides public health. However, considering the WTP (Water Treatment Plant) is an industry, with its inputs and waste generation, they must be constantly evaluated and monitored to verify the best and most appropriate way to process and dispose their waste, minimizing therefore the potential impacts to the environment. By volume, the most significant waste is the rapid filter backwash water. It is very common the disposal of this waste without treatment in water sources, which are used, for the most part, as a water supply source of a downstream population. This study evaluated quantitative and qualitative parameters in filter backwash water in three WTP - Itaitinga, Maranguape and Pacatuba, located in Ceará State, northeast of Brazil. It was found that the Maranguape WTP, in terms of treatment capacity, is the larger. The Itaitinga WTP is the one that consumes more water during filters washing. The Pacatuba WTP exhibited higher concentration of total suspended and settleable solids, COD and aluminum in the filters backwash water. It is noteworthy that the settleable solids and total suspended solids in all three WTP are above the effluent discharge standard recommended by Resolution 154/2002 of SEMACE (State Superintendent of Environment of Ceará). It was concluded that the filter backwash water from the study WTP exceeded the allowed values for legislation to be disposed directly into surface water bodies. It is suggested as an alternative to treat and recycle the filter backwashing water the construction of sludge settling ponds.

Ativismo Vegano em Natal: uma etnografia de mobilização política, alimentação ética e identidades

This research has vegan groups in the city of Natal-RN as interlocutors, although I also report to other research contexts, such as those located in the cities of Recife (Pernambuco State) and Campina Grande (Paraíba State). Moved by ethical principles based on animal rights, vegans refuse to consume any product with animal origin. To the extent that consumption habits can be considered powerful elements of identification, the relationship between consumption, food, identity, and politics is an important analytical key in the development of this work. As my main theoretical question, I follow the ways by which the vegan discourse (of abolitionist character) takes shape and materializes into actions, demonstrations and political mobilization. Therefore, I aim to present an ethnography of activities performed collectively by these individuals, such as those of a more ludic character (picnics, etc.) as well as those more politically oriented, especially protests and demonstrations in public places.

As necessidades formativas de professores para o trabalho com a educação integral

In Brazil, since the 1990, the country has been operating an extensive transformation in the education system. This situation is justified, among other reasons, the search for answers to the new demands that modern society gives to school, to new technologies and information and communication systems. To better put the Brazilian school that context, the federal government, through the Ministerial Decree No. 17/2007, created the More Education Program as a measure to combat low levels of development of basic education in the capital cities and metropolitan areas, aiming at the implementation of comprehensive education in schools. After the first year since the implementation of the program, there are advances in the permanence of students within the school. But as for the teachers, there is a gap on ownership and consequent acceptance. Considering the reality of the state system of schools of Basic Education in Natal - RN, this study investigates the training needs of teachers in institutions working with More Education Program, envisioning the educational relationship with Macrocampos contained in this national project. Answering this question allows us to absorb the concept of such needs in teachers, as well as to check priority in relation to the continuing education of teachers for this new pedagogical reality.

Modelagem computacional para avaliação da interação entre painéis de alvenaria e estrutura de suporte em concreto armado

The developed study proposes a new computer modeling efficient and easy to apply in usual project situations to evaluate the interaction between masonry panels and support structure. The proposed model simulates the behavior of the wall exclusively using frame finite elements, thus compounding an equivalent frame. The validation was performed in two ways: firstly, through the analysis of various panels of generic plans, comparing the results obtained from equivalent frame model with the ones from a reference model, which uses shell finite elements in discretization of the walls; and in a second step, comparing with the results of the experimental model of Rosenhaupt. The analyzes considered the linear elastic behavior for materials and consisted basically in the evaluation of vertical displacements and efforts in support beams, and tensions at the base of walls. Was also evaluated, from flat and threedimensional modeling of some walls from a real project, important aspects of the wall-beam interaction, e.g.: the presence of openings of doors and windows, arranged in any position; conditions of support and linking of beams; interference of moorings between walls; and consideration of wind action. The analysis of the achieved results demonstrated the efficiency of the proposed modeling, since they have very similar aspects in the distribution of stresses and efforts, always with intensities slightly larger than those of the reference and experimental models.

Estudo de duas pseudoligas de Nb-Cu obtidas pela rota da metalurgia do pó

The Nb-Cu pseudoalloys present themselves as potential substitutes for the alloys from a well known system and already commercially applied, as the W-Cu alloys, used in applications such as heat sinks, electrical contacts and coils for the generation of high magnetic fields. Because it is an immiscible system, where there is mutual insolubility and low wettability of the liquid Cu on the Nb surface, the processing route used in this work was the Powder Metallurgy. Two Nb alloys were used, with additions of 10% and 20% in weight of Cu, and times of 20, 30 and 40 hours for the high energy milling of the starting powders. The milling evolution of the powders is presented through the characterization techniques, such as the LASER diffraction for particle size, XRD, SEM, EDS, DSC, dilatometry, TEM and chemical analysis. After the milling, portions of the loads were submitted to the annealing heat treatment. The process used for the samples consolidation was the hot pressing, which has been applied both on some milled powders samples, as on the annealed powders. Subsequent heat treatments were performed in the samples at temperatures of 1000ºC (solid phase) and 1100ºC (in the Cu liquid phase). All sets of consolidated samples, and also the two sets of the heat treated, were analyzed by XRD, SEM, EDS, density and Vickers microhardness. Moreover, other Nb powder samples with 10% and 20% in weight of Cu obtained by simple mechanical mixing, were consolidated, thermally treated and characterized with the same techniques applied to the others, and the results were compared among themselves. Despite the difficulty of consolidation and densification of the two pseudoalloys of the Nb-Cu system of this study, on the route that passes through the HEM, samples were obtained with densities around 90% of the theoretical density. And, on the processing route of which were only mixed, the values reached up to 97%. Therefore, in this work are also emphasized the processes that made possible these results.

Degradação fotocatalítica oxidativa do fenol utilizando carvão obtido da pirólise de diferentes biomassas

The modern industrial progress has been contaminating water with phenolic compounds. These are toxic and carcinogenic substances and it is essential to reduce its concentration in water to a tolerable one, determined by CONAMA, in order to protect the living organisms. In this context, this work focuses on the treatment and characterization of catalysts derived from the bio-coal, by-product of biomass pyrolysis (avelós and wood dust) as well as its evaluation in the phenol photocatalytic degradation reaction. Assays were carried out in a slurry bed reactor, which enables instantaneous measurements of temperature, pH and dissolved oxygen. The experiments were performed in the following operating conditions: temperature of 50 °C, oxygen flow equals to 410 mL min-1 , volume of reagent solution equals to 3.2 L, 400 W UV lamp, at 1 atm pressure, with a 2 hours run. The parameters evaluated were the pH (3.0, 6.9 and 10.7), initial concentration of commercial phenol (250, 500 and 1000 ppm), catalyst concentration (0, 1, 2, and 3 g L-1 ), nature of the catalyst (activated avelós carbon washed with dichloromethane, CAADCM, and CMADCM, activated dust wood carbon washed with dichloromethane). The results of XRF, XRD and BET confirmed the presence of iron and potassium in satisfactory amounts to the CAADCM catalyst and on a reduced amount to CMADCM catalyst, and also the surface area increase of the materials after a chemical and physical activation. The phenol degradation curves indicate that pH has a significant effect on the phenol conversion, showing better results for lowers pH. The optimum concentration of catalyst is observed equals to 1 g L-1 , and the increase of the initial phenol concentration exerts a negative influence in the reaction execution. It was also observed positive effect of the presence of iron and potassium in the catalyst structure: betters conversions were observed for tests conducted with the catalyst CAADCM compared to CMADCM catalyst under the same conditions. The higher conversion was achieved for the test carried out at acid pH (3.0) with an initial concentration of phenol at 250 ppm catalyst in the presence of CAADCM at 1 g L-1 . The liquid samples taken every 15 minutes were analyzed by liquid chromatography identifying and quantifying hydroquinone, p-benzoquinone, catechol and maleic acid. Finally, a reaction mechanism is proposed, cogitating the phenol is transformed into the homogeneous phase and the others react on the catalyst surface. Applying the model of Langmuir-Hinshelwood along with a mass balance it was obtained a system of differential equations that were solved using the Runge-Kutta 4th order method associated with a optimization routine called SWARM (particle swarm) aiming to minimize the least square objective function for obtaining the kinetic and adsorption parameters. Related to the kinetic rate constant, it was obtained a magnitude of 10-3 for the phenol degradation, 10-4 to 10-2 for forming the acids, 10-6 to 10-9 for the mineralization of quinones (hydroquinone, p-benzoquinone and catechol), 10-3 to 10-2 for the mineralization of acids.

Análise de tendência e caracterização sazonal e interanual da evapotranspiração de referência para o sudoeste da amazônia brasileira: Acre, Brasil

The objective of this research was to investigate monthly climatological, seasonal, annual and interdecadal of the reference evapotranspiration (ETo) in Acre state in order to better understand its spatial and temporal variability and identify possible trends in the region. The study was conducted with data from Rio Branco municipalities, the state capital, Tarauacá and Cruzeiro do Sul considering a 30-year period (1985-2014), from monthly data from weather stations surface of the National Institute of Meteorology. The methodology was held, first, the consistency of meteorological data. Thus, it was made the gap filling in the time series by means of multivariate techniques. Subsequently were performed statistical tests trend (Mann-Kendall) and homogeneity, by Sen's estimator of the magnitude of this trend is estimated, as well as computational algorithms containing parametric and non-parametric tests for two samples to identify from that year the trend has become significant. Finally, analysis of variance technique (ANOVA) was adopted in order to verify whether there were significant differences in average annual evapotranspiration between locations. The indirect method of Penman-Montheith parameterized by FAO was used to calculate the ETo. The results of this work through examination of the descriptive statistics showed that the ETo the annual average was 3.80, 2.92 and 2.86 mm day-1 year, to Rio Branco, Tarauacá and Cruzeiro do Sul, respectively. Featuring quite remarkable seasonal pattern with a minimum in June and a maximum in October, with Rio Branco to town one with the strongest signal (amplitudes) on the other hand, the Southern Cross presented the highest variability among the studied locations. By ANOVA it was found that the average annual statistically different for a significance level of 1% between locations, but the annual average between Cruzeiro do Sul and Tarauacá no statistically significant differences. For the three locations, the 2000s was the one with the highest ETo values associated with warmer waters of the North Atlantic basin and the 80s to lower values, associated with cooler waters of this basin. By analyzing the Mann-kendall and Sen estimator test, there was a trend of increasing the seasonal reference evapotranspiration (fall, winter and spring) on the order of 0.11 mm per decade and that from the years of 1990, 1996 and 2001 became statistically significant to the localities of Cruzeiro do Sul Tarauacá and Rio Branco, respectively. For trend analysis of meteorological parameters was observed positive trend in the 5% level of significance, for average temperature, minimum temperature and solar radiation.

Proposta de modelo de gestão de riscos para uma IFES visando a realização de auditoria baseada em riscos

Organizations are susceptible to the occurrence of many events that may affect the achievement of their objectives. As a result, Brazilian Public Administration supervisory bodies have required institutions to adopt risk management policies. Given the large number of recommendations issued by Federal Audit Court (TCU) to various Federal Institutions of Higher Education (IFES) in this area, it is proposed a risk management model for Universidade Federal do Rio Grande do Norte (UFRN). This is an applied, exploratory and qualitative study. Regarding to technical procedures, it is characterized as documentary analysis, bibliographical research, case study and action research. The bibliographical research was used to support the elaboration of the Risk Management Guide for Federal Institutions of Higher Education (GERIFES). The documentary analysis, in turn, was used with the aim of knowing the organizational structure and the university´s macroprocesses. The author works in the university internal auditing department and shares the same problem. This characterizes the work as an action research. The case study supported both the elaboration of the guide and the simulation of the specific functionality for the university information system, demonstrated through the User Manual Module "Risk Management" proposed for the Integrated System of Property, Administration and Contracts (SIPAC). This manual has been prepared in order to facilitate the use of this tool if it will be incorporated into the university information system. As research results, a risk management model for UFRN was elaborated and a simulation of an informational tool, which is able to manage risks related to events that may affect the achievement of institutional objectives, was provided to the university administration.

Avaliação de duas variedades de Passiflora edulis sobre as respostas comportamentais de camundongos e um possível mecanismo de ação

The medicinal plants constitute a rich source of biologically active compounds used for the treatment of many psychiatric disorders, such as anxiety disorders and depression. Generalized anxiety disorder has increased significantly, being the second most prevalent disorder in care facilities to public health. Depression is considered a chronic and common psychiatric disorder that affects 350 million people of all ages around the world. In this context, the pharmacological intervention conduits have been employed, effective, although leave to be desired when observed adverse effects. The genus Passiflora is commonly commercially known by its fruit, but is also widely used in traditional Brazilian medicine. Passiflora edulis displays considerable morphological variability. This plant produces two types of fruit: Purple (Passiflora edulis Sims fo. edulis) and yellow (Passiflora edulis fo. flavicarpa Degener). This study investigated the central effects of aqueous extract of the leaves of the two varieties of the species Passiflora edulis in tests used to assess behavior related to anxiety and depression, as well as investigating the potential effect of the antidepressant-like fractions of edulis fo. edulis and neuropharmacological mechanisms responsible for this action. To conduct this study used male Swiss mice (2 months old, weighing 30-35 g). The animals received the aqueous extract of the leaves of the two species of Passiflora: edulis fo. edulis (100, 300, 1000 mg / kg) and fractions ethyl acetate, butanol and aqueous waste (25, 50, 75, 100 mg / kg) and edulis fo. flavicarpa (30, 100, 300, 1000 mg / kg) or saline by gavage 60 minutes prior to the maze tests at high cross the open field test, test forced swim test and sedation induced by thiopental. To investigate the mechanism of action of the activity of antidepressant type of fractions the following drugs were used: PCPA (inhibitor of 5-HT synthesis) AMPT (inhibitor of catecholamine synthesis), DSP-4 (noradrenergic neurotoxin) and Sulpiride (antagonist selective dopamine D2 receptor). They were used as a standard positive control, fluoxetine and nortriptyline. The results of the phytochemical profile show very different characteristics to the aqueous extract of the varieties of Passiflora edulis "flavicarpa" and "edulis". The aqueous extracts of both varieties of Passiflora edulis share anxiolytic activity type (edulis fo. edulis 300 mg/kg; edulis fo. flavicarpa 300 and 1000 mg/kg) and antidepressant (edulis fo. edulis 300 mg/kg; edulis fo flavicarpa 1000 mg/kg), while the effect hipolocomotor/sedative was only seen for edulis fo. edulis (1000 mg/kg). Both fractions ethyl acetate, butanol aqueous extract edulis fo. edulis showed activity type antidepressant at a dose of 50 mg/kg in the forced swim test. The data suggest that the effect of antidepressant-like fractions edulis fo. edulis involves catecholaminergic and serotonergic neurotransmission, particularly dopaminergic, there is seen that pre-treatment DSP-4 is not affected antidepressant action of fractions as was dependent activation of dopamine D2 receptors.

Avaliação de duas variedades de Passiflora edulis sobre as respostas comportamentais de camundongos e um possível mecanismo de ação

The medicinal plants constitute a rich source of biologically active compounds used for the treatment of many psychiatric disorders, such as anxiety disorders and depression. Generalized anxiety disorder has increased significantly, being the second most prevalent disorder in care facilities to public health. Depression is considered a chronic and common psychiatric disorder that affects 350 million people of all ages around the world. In this context, the pharmacological intervention conduits have been employed, effective, although leave to be desired when observed adverse effects. The genus Passiflora is commonly commercially known by its fruit, but is also widely used in traditional Brazilian medicine. Passiflora edulis displays considerable morphological variability. This plant produces two types of fruit: Purple (Passiflora edulis Sims fo. edulis) and yellow (Passiflora edulis fo. flavicarpa Degener). This study investigated the central effects of aqueous extract of the leaves of the two varieties of the species Passiflora edulis in tests used to assess behavior related to anxiety and depression, as well as investigating the potential effect of the antidepressant-like fractions of edulis fo. edulis and neuropharmacological mechanisms responsible for this action. To conduct this study used male Swiss mice (2 months old, weighing 30-35 g). The animals received the aqueous extract of the leaves of the two species of Passiflora: edulis fo. edulis (100, 300, 1000 mg / kg) and fractions ethyl acetate, butanol and aqueous waste (25, 50, 75, 100 mg / kg) and edulis fo. flavicarpa (30, 100, 300, 1000 mg / kg) or saline by gavage 60 minutes prior to the maze tests at high cross the open field test, test forced swim test and sedation induced by thiopental. To investigate the mechanism of action of the activity of antidepressant type of fractions the following drugs were used: PCPA (inhibitor of 5-HT synthesis) AMPT (inhibitor of catecholamine synthesis), DSP-4 (noradrenergic neurotoxin) and Sulpiride (antagonist selective dopamine D2 receptor). They were used as a standard positive control, fluoxetine and nortriptyline. The results of the phytochemical profile show very different characteristics to the aqueous extract of the varieties of Passiflora edulis "flavicarpa" and "edulis". The aqueous extracts of both varieties of Passiflora edulis share anxiolytic activity type (edulis fo. edulis 300 mg/kg; edulis fo. flavicarpa 300 and 1000 mg/kg) and antidepressant (edulis fo. edulis 300 mg/kg; edulis fo flavicarpa 1000 mg/kg), while the effect hipolocomotor/sedative was only seen for edulis fo. edulis (1000 mg/kg). Both fractions ethyl acetate, butanol aqueous extract edulis fo. edulis showed activity type antidepressant at a dose of 50 mg/kg in the forced swim test. The data suggest that the effect of antidepressant-like fractions edulis fo. edulis involves catecholaminergic and serotonergic neurotransmission, particularly dopaminergic, there is seen that pre-treatment DSP-4 is not affected antidepressant action of fractions as was dependent activation of dopamine D2 receptors.