Are we focussing wild dog control the wrong time of the year and going about it the wrong way?

Our evaluation of the predation of calves by wild dogs in the 1990s found that the number of calves killed and frequency of years that calf losses occurred, is higher in baited areas compared to adjoining, non-baited areas of similar size. Calf losses were highest with poor seasonal conditions, low prey numbers and where baited areas were re-colonised by wild dogs soon after baiting. We monitored wild dog “activity” before and after 35 baiting programs in southwest, central west and far north Queensland between 1994 and 2006 and found change in activity depends on the timing of the baiting. Baiting programs conducted between October and April show an increase in dog activity post-baiting (average increase of 219.1%, SEM 100.9, n=9, for programs conducted in October and November; an increase of 82.5%, SEM 54.5, n=7 for programs conducted in March and April; and a decrease in activity of 46.5%, SEM 10.2, n=19 for programs conducted between May and September). We monitored the seasonal activity and dispersal of wild dogs fitted with satellite transmitters 2006 to present. We have found that: • Activity of breeding males and females, whilst rearing and nurturing pups, is focussed around the den between July to September and away from areas of human activity. Activity of breeding groups appears to avoid locations of human activity until juveniles become independent (around late November). • While independent and solitary yearlings often have unstable, elliptically-shaped territories in less favourable areas, members of breeding groups have territories that appear seasonally stable and circular located in more favourable habitats. • Extra-territorial forays of solitary yearlings can be huge, in excess of 200 km. The largest forays we have monitored have occurred when the activity of pack members is focussed around rearing pups and juveniles (August to November). • Where wild dogs have dispersed or had significant territorial expansion, it has occurred within days of baiting programs and onto recently baited properties. • The wild dogs we have tracked have followed netting barrier fences for hundreds of kilometres and lived adjacent to or bypassed numerous grids in the barrier. Based on these studies, we conclude that a proportion of the perceived decline in dog activity between May and September, post baiting, is due to a decline in dog activity in areas associated with human activity. The increase in dog activity post-baiting between October and May (and increased calf predation on baited properties) is likely caused by wild dogs dispersing (juveniles and yearlings) or expanding (adults) their territory into baited, now ‘vacant’, areas. We hypothesise that baiting programs should be focussed in summer and autumn commencing late November as soon as juveniles become independent of adults. We also hypothesise that instead of large, annual or semi-annual baiting programs, laying the same number of baits over 4-6 weeks may be more effective. These hypotheses need to be tested through an adaptive management project.

"Kyllähän täällä tehdään kaikenlaista laidasta laitaan..." : Nuorten työpajatoiminta ja oppiminen työpajoilla työharjoittelijoiden kokemana

Workshops can be seen as a one kind of occupational model in the field of the social employing. The objective of social employing is to support the employment of those persons who are in a weak labour market position and to maintain their ability to function. The objectives of the workshops, which are offering work experience and learning of life management, maintain the same goal as social employment. Workshop services in Finland are relatively little scientifically studied in spite of their fairly long history. The workshop as a concept is still quite sparsely defined and also an unknown occupational model to the large part of people. The starting point for this study was to clarify what the workshops are like, what the services are like and how learning can be seen from the point of view of the workshop services. The objective of this study was to analyse how the apprentices experience the workshop services as well as learning in the workshops and thus describe how the workshops are shaped at the youth workshops. According to earlier studies the apprentices have experienced the workshops as useful periods in their lives and also they believe that other people in society appreciate the experience that apprentices have been received from the workshops. This study can be described as a qualitative study. Its methodological foundation is in phenomenology and especially in existential phenomenology. The research material consisted of seven individual interviews and two group interviews. In the group interviews five apprentices were those who had also participated in the individual interviews and one apprentice who did not participate. The interviewees' ages were between 17-22 years. The interviews were carried out as semi-structured interviews. The method which was utilised in the analysis of the research material is developed by Juha Perttula (2000). This analyse method is based on existential phenomenology. The apprentices considered that significant experiences in the workshop services were the entry to the workshop, the form of activity of the workshop, workshop community, the achieving of life management and work experience, the understanding of the significance of the education and the planning of the future. Regarding to learning the attitude, on-the-job learning, the importance of the mentors, the new information and new skills achieved were significant experiences at the workshop for the apprentices. The apprentices' experiences reflect well the achievement of the objectives which are set for the workshop services. Results of this study are also compatible to the results of earlier studies of apprentices' positive experience of the workshop services. The results can be utilised in developing the workshop services to offer more versatile experiences than before and to improve learning conditions on the workshops. The arranging of the on-the-job learning and the significance of the actions of mentors should also be noticed.

Koulukasvatusta teknologisoituvaan yhteiskuntaan : Kansakoulun opetussuunnitelman rakentuminen, 1945-1952

Education for a Technological Society. Public School Curriculum Construction, 1945-1952. The subject of my research is the significance of technology in the construction process of the public school curriculum during the years 1945-1952. During the period the war reparation and rebuilding placed demands and actions to rationalise and dramatise industry and agriculture. Thereby the ambitions of building a technological country and the reformation of curriculum took place simultaneously. Fordistian terms of reference, of which the principles were mass production, rationalisation and standardisation, a hierarchical division of labour and partition of assignments, provided a model for the developing curriculum. In the research the curriculum is examined as an artefact, which shapes socio-technically under the influence of social and technical factors. In the perspective of socio-technical construction the artefact is represented by the viewpoints of members of relevant social groups. The groups give meaning to the curriculum artefact, which determines the components of the curriculum. The weakness of the curriculum was its ineffectiveness, which was due to three critical problems. Firstly, the curriculum was to be based on scientific work, which meant the development of schools through experiments and scientific research. Secondly, the civilised conseption in the curriculum was to be composed of theoretical knowledge, as well as practical skills. Practical education was useful for both the individual and society. Thirdly, the curriculum was to be reformed in a way that the individuality of the pupil would be taken into account. It was useful for the society that talents and natural abilities of every pupil were observed and used to direct the pupil to the proper place in the social division of labour, according to the "right man in a right place" principle. The solutions to critical problems formed the instructions of the public school curriculum, which described the nature and content of education. Technology and its development were on essential part of the whole school curriculum process. The quality words connected to the development of technology - progress, rationality and effectiveness - were also suitable qualifiers and reasons for the reform of the curriculum. On the other hand, technology set a point of comparison and demand for the development of all phases of education. The view of technology was not clearly deterministic - it was also possible to shape technological society with the help of education. The public school curriculum process indicates how originally the principles of technological systems were shaped to the language of education and accepted in educational content.

Determining and quantifying components of an aquaculture soundscape.

Recirculating aquaculture systems have a unique anthropogenic-based soundscape which is characterized by the type of equipment utilized, the structural configuration of walls, tanks, equipment, the substrate the tanks are situated on and even the activities of the personnel operating the facility. The soundscape of recirculation facilities is inadequately understood and remains poorly characterized, although it is generally accepted that the dominant sounds found in such facilities are within the hearing range of fish. The objective of this study was to evaluate the soundscape in a recirculating aquaculture facility from an intra-tank perspective and determine how the soundscape is shaped by a range of characteristics within the facility. Sounds were recorded across an operating aquaculture facility including different tank designs. The sounds recorded fell within previously measured pressure level ranges for recirculating systems, with the highest maximum sound pressure level (SPL) recorded at 124 dB re 1 mu Pa-2/Hz (with an FFT bin width of 46.9 Hz, centered at 187.5 Hz). The soundscape within the tanks was stratified and positively correlated with depth, the highest sound pressure occurring at the base of the tanks. Each recording of the soundscape was dominated by a frequency component of 187.5 Hz (corresponding centre of the 4th 46.9 Hz FFT analysis bin) that produced the highest observed SPL Analysis of sound recordings revealed that this peak SPL was associated with the acoustic signature of the pump. The soundscape was also evaluated for impacts of tank hood position, time of day, transient sounds and airstone particle size types, all of which were found to appreciably influence sound levels and structure within the tank environment. This study further discusses the distinctiveness of the soundscape, how it is shaped by the various operating components and considers the aquaculture soundscape in relation to natural soundscapes found within aquatic tropical environments.

Linnunkiikut ja kallen kaulukset : Kotitekoiset kuukautissiteet 1900-luvun alkupuolen Suomessa

The aim of this thesis was to study what kind of home-made menstrual pads were used in the early 20th century in Finland, how the home-made pads were made and which techniques and materials were used. The use and taking care of menstrual pads were also explored. The history of menstrual pads has been studied in Sweden, Germany and United States but none of those studies has concentrated on home-made pads. Instead, there are many studies about womanhood and menstruation. In many studies home-made menstrual pads are only briefly mentioned. Menstrual pads were not commonly used in Finland at the beginning of the 20th century, but already in the 1940s the use of menstrual pads had become common in every stratum of society. Home-made menstrual pads were used even until the 1960s. In Finland, factory-made disposable menstrual pads became common only in the 1930s and they were only slowly accepted. The study material consisted of nine interviews, three archival inquiries, health care guidebooks from 1893 to 1943 and authentic menstrual pads, menstrual belts and other objects related to them. The interviewed women were born between 1915 and 1939. The narrative approach was used in the study and it also guided the analysis. The interview and archival data were studied according to the basic rules of oral history studies. Literature consisted of publications from several disciplines. The extensive primary material played the most important role in this study. The reconstructions of the menstrual pads were made according to the interviewed women s advice. In Finland there were innumerable variations of home-made menstrual pads. The pads were most commonly crocheted and knitted either by hand or by knitting machine. Pads were also sewn of cloth, old bed linen or old underwear. The menstrual pads were self-made or made by a female relative. Word of mouth was important in spreading information on how to make pads, because there were hardly any instructions available. The biggest pads were 54 cm long and 13 cm wide. The most widely used pad model was a rectangle, which had triangle-shaped ends with a buttonhole or a loop. The pad was attached to the menstrual belt or to the buttons of the suspender belt. Knitted and crocheted pads had one, two or three layers. In sewn pads, there could be even more layers. Cellulose wadding or pieces of cloth could be placed inside the pad to increase the absorption ability. The experiences of the comfort of self-made pads varied. The crocheted and sewn pads were found chafing, knitted ones were found soft and comfortable. The menstrual pads were laborious to wash and boil in lye water. Therefore disposable pads made everyday life easier. The home-made menstrual pads were part of a unique tradition of handicrafts and folk culture. Hand-made pads were one of the most common handicraft products and were a part of every woman s life. Even so, the menstrual pads were unnoticeable. The large number of variations was probably caused by the silence around menstrual topics and by the lack of instructions for making pads. Variations are also explained by the uniqueness of every handicraft product. In Finland the home-made pads were used until relatively recent times. This was caused by the conditions of wartime and the following years and the rarity of commercial pads. Furthermore, until the late 20th century Finland was an agricultural society where all innovations spread slowly. Home-made menstrual pad was a secret handicraft of women and every woman needed to know how to make it by herself.

Collation, analysis and research of thermal benefits of green life in the urban landscapes

This project reviewed international research conducted on the possible role of plants in alleviating high temperatures in our living spaces. The literature review served to identify the work that has already been carried out in the area and to highlight the gaps to be filled by experimental research. A pilot study then investigated the thermal properties of six of the most common landscaping materials. This project clearly shows that plants can play a significant role in modifying the thermal conditions of urban environments. Tall trees can shade nearby buildings and allow for reductions in cooling costs. In addition to basic shading, the dispersal of heat via the plant’s natural transpiration stream has long been recognised as an important component of the urban energy balance. It has been shown that urban temperatures can be up to 7°C higher than nearby rural areas, illustrating the impact of plants on their environment. These benefits argue against the idea of removing plants from landscapes in order to save on water in times of drought. Similarly, the idea of switching to artificial turf is questionable, since artificial turf still requires watering and can reach temperatures that far exceed the safe range for players. While vegetation offers evaporative cooling, non-vegetative, impervious surfaces such as concrete do not, and can therefore cause greater surface and soil temperatures. In addition, the higher temperatures associated with these impervious surfaces can negatively affect the growth of plants in surrounding areas. Permeable surfaces, such as mulches, have better insulating properties and can prevent excessive heating of the soil. However, they can also lead to an increase in reflected longwave radiation, causing the leaves of plants to close their water-conducting pores and reducing the beneficial cooling effects of transpiration. The results show that the energy balance of our surroundings is complicated and that all components of a landscape will have an impact on thermal conditions.

Shaping (reflexive) professional identities across an undergraduate degree programme: A longitudinal case study

In our complex and incongruous professional worlds, where there is no blueprint for dealing with unpredictable people and events, it is imperative that individuals develop reflexive approaches to professional identity building. Notwithstanding the importance of disciplinary knowledge and skills, higher education has a crucial role to play in guiding students to examine and mediate self in relation to context for effective decision-making and action. This paper reports on a small-scale longitudinal project that investigated the ways in which ten undergraduate students over the course of a three-year Radiation Therapy degree shaped their professional identities. Theories of reflexivity and methods of discourse analysis are utilised to understand the ways in which individuals accounted for their professional identity projects at university. The findings suggest that, across time, the participants negotiated professional ‘becoming’ through four distinct kinds of reflexive modalities. These findings have implications for teaching strategies and curriculum design in undergraduate programs.

Finite volume TVD formulation of lattice Boltzmann simulation on unstructured mesh

A numerical scheme is presented for accurate simulation of fluid flow using the lattice Boltzmann equation (LBE) on unstructured mesh. A finite volume approach is adopted to discretize the LBE on a cell-centered, arbitrary shaped, triangular tessellation. The formulation includes a formal, second order discretization using a Total Variation Diminishing (TVD) scheme for the terms representing advection of the distribution function in physical space, due to microscopic particle motion. The advantage of the LBE approach is exploited by implementing the scheme in a new computer code to run on a parallel computing system. Performance of the new formulation is systematically investigated by simulating four benchmark flows of increasing complexity, namely (1) flow in a plane channel, (2) unsteady Couette flow, (3) flow caused by a moving lid over a 2D square cavity and (4) flow over a circular cylinder. For each of these flows, the present scheme is validated with the results from Navier-Stokes computations as well as lattice Boltzmann simulations on regular mesh. It is shown that the scheme is robust and accurate for the different test problems studied.

Integration of clinical information systems in Saudi Arabian health care contexts: A grounded theory exploration

This research examined the implementation of clinical information system technology in a large Saudi Arabian health care organisation. The research was underpinned by symbolic interactionism and grounded theory methods informed data collection and analysis. Observations, a review of policy documents and 38 interviews with registered nurses produced in-depth data. Analysis generated three abstracted concepts that explained how imported technology increased practice and health care complexity rather than enhance quality patient care. The core category, Disseminating Change, also depicted a hierarchical and patriarchal culture that shaped the implementation process at the levels of government, organisation and the individual.

Characterisation of sweetpotato from Papua New Guinea and Australia: Physicochemical, pasting and gelatinisation properties.

The physicochemical and functional properties of flours from 25 Papua New Guinean and Australian sweetpotato cultivars were evaluated. The cultivars (white-, orange-, cream-, and purple-fleshed, and with dry matter, from 15 to 28 g/100 g), were obovate, oblong, elliptic, curved, irregular in shape, and essentially thin-cortexed (1-2 mm). Flour yield was less than 90 g/100 g solids, while starch, protein, amylose, water absorption and solubility indices, as well as total sugars, varied significantly (p < 0.05). Potassium, sodium, calcium, and phosphorus were the major minerals measured, and there were differences in the pasting properties, which showed four classes of shear-thinning and shear-thickening behaviours. Differential scanning calorimetry showed single-stage gelatinisation behaviour, with cultivar-dependent temperatures (61-84 degrees C) and enthalpies (12-27 J/g dry starch). Oval-, round- and angular-shaped granules were observed with a scanning electron microscope, while X-ray diffraction revealed an A-type diffraction pattern in the cultivars, with about 30% crystallinity. This study shows a wide range of sweetpotato properties, reported for the first time.

Capturing "organised crime" in Australian Law

This briefing paper presents and foreshadows ongoing PhD research by the first author into how understandings of organised crime in Australia have been shaped, and the extent to which these perceptions have influenced legislative and policing responses. It begins with an historical survey of significant models of organised crime, then reviews current Australian legislative strategies, and goes on to raise questions about the conceptual model that underpins these strategies. The paper concludes with a discussion of the potential policy implications of this research.

A Story of Organized Crime: Constructing Criminality and Building Institutions

This is a narrative about the way in which a category of crime-to-be-combated is constructed through the discipline of criminology and the agents of discipline in criminal justice. The aim was to examine organized crime through the eyes of those whose job it is to fight it (and define it), and in doing so investigate the ways social problems surface as sites for state intervention. A genealogy of organized crime within criminological thought was completed, demonstrating that there are a range of different ways organized crime has been constructed within the social scientific discipline, and each of these were influenced by the social context, political winds and intellectual climate of the time. Following this first finding, in-depth qualitative interviews were conducted with individuals who had worked at the apex of the policing of organized crime in Australia, in order to trace their understandings of organized crime across recent history. It was found that organized crime can be understood as an object of the discourse of the politics of law and order, the discourse of international securitization, new public management in policing business, and involves the forging of outlaw identities. Therefore, there are multiple meanings of organized crime that have arisen from an interconnected set of social, political, moral and bureaucratic discourses. The institutional response to organized crime, including law and policing, was subsequently examined. An extensive legislative framework has been enacted at multiple jurisdictional levels, and the problem of organized crime was found to be deserving of unique institutional powers and configurations to deal with it. The social problem of organized crime, as constituted by the discourses mapped out in this research, has led to a new generation of increasingly preemptive and punitive laws, and the creation of new state agencies with amplified powers. That is, the response to organized crime, with a focus on criminalization and enforcement, has been driven and shaped by the four discourses and the way in which the phenomenon is constructed within them. An appreciation of the nexus between the emergence of the social problem, and the formation of institutions in response to it, is important in developing a more complete understanding of the various dimensions of organized crime.

Dosage Compensation And Sex Determination In Drosophila - Mechanism Of Measurement Of The X/A Ratio

We propose a molecular mechanism for the intra-cellular measurement of the ratio of the number of X chromosomes to the number of sets of autosomes, a process central to both sex determination and dosage compensation in Drosophila melanogaster. In addition to the two loci, da and Sxl, which have been shown by Cline (Genetics, 90, 683, 1978)and others to be involved in these processes, we postulate two other loci, one autosomal (ω) and the other, X-linked (π). The product of the autosomal locus da stimulates ω and initiates synthesis of a limited quantity of repressor. Sxl and π ,both of which are X-linked, compete for this repressor as well as for RNA polymerase. It is assumed that Sxl has lower affinity than π for repressor as well as polymerase and that the binding of polymerase to one of these sites modulates the binding affinity of the other site for the enzyme. It can be shown that as a result of these postulated interactions transcription from the Sxl site is proportional to the X/A ratio such that the levels of Sxl+ product are low in males, high in females and intermediate in the intersexes. If, as proposed by Cline, the Sxl- product is an inhibitor of X chromosome activity, this would result in dosage compensation. The model leads to the conclusion that high levels of Sxl+ product promote a female phenotype and low levels, a male phenotype. One interesting consequence of the assumptions on which the model is based is that the level of Sxl+ product in the cell, when examined as a function of increasing repressor concentration, first goes up and then decreases, yielding a bell-shaped curve. This feature of the model provides an explanation for some of the remarkable interactions among mutants at the Sxl, da and mle loci and leads to several predictions. The proposed mechanism may also have relevance to certain other problems, such as size regulation during development, which seem to involve measurement of ratios at the cellular level.

Sensory Systems in Sawfishes. 1. The Ampullae of Lorenzini

The distribution and density of the ampullary electroreceptors in the skin of elasmobranchs are influenced by the phylogeny and ecology of a species. Sensory maps were created for 4 species of pristid sawfish. Their ampullary pores were separated into pore fields based on their innervation and cluster formation. Ventrally, ampullary pores are located in 6 areas (5 in Pristis microdon), covering the rostrum and head to the gills. Dorsally, pores are located in 4 areas (3 in P. microdon), which cover the rostrum, head and may extend slightly onto the pectoral fins. In all species, the highest number of pores is found on the dorsal and ventral sides of the rostrum. The high densities of pores along the rostrum combined with the low densities around the mouth could indicate that sawfish use their rostrum to stun their prey before ingesting it, but this hypothesis remains to be tested. The directions of ampullary canals on the ventral side of the rostrum are species specific. P. microdon possesses the highest number of ampullary pores, which indicates that amongst the study species this species is an electroreception specialist. As such, juvenile P. microdon inhabit low-visibility freshwater habitats.

Two varieties of the invasive liana, cat’s claw creeper, Macfadyena unguis-cati (Bignoniaceae) in Queensland, Australia

The invasive liana cat’s claw creeper, Macfadyena unguis-cati, native to tropical Central and South America, is a major environmental weed in Queensland and New South Wales (NSW). Two morphologically distinct cat’s claw creeper varieties occur in Australia, a ‘short-pod’ variety that is widespread through Queensland and NSW and a ‘long-pod’ variety restricted to a few sites in southeast Queensland. In this study we report the differences in the above-ground morphological, phenological and reproductive traits between the two varieties. The ‘long-pod’ variety has significantly larger leaves, larger pods, and larger number of seeds per pod than the ‘short-pod’ variety. The ‘short-pod’ variety has a slightly wider pods, and thicker leaves than the ‘long-pod’ variety. Both varieties have a yellow trumpet shaped flower, but the flower of the ‘long-pod’ variety has a deeper hue of yellow than the ‘short-pod’ flower. The fruits of the ‘short-pod’ variety mature in late summer to early autumn while the fruits of ‘long-pod’ variety mature in late winter to early spring. The more widespread nature of the ‘short-pod’ variety could potentially be due to a preference for this variety as an ornamental plant, due to its more presentable foliage characteristics and shorter pods, in contrast to the ‘long-pod’ variety.