Polissacarídeos sulfatados de interesse farmacológico no camarão litopenaeus schimitti

Sulfated Polysaccharides with unique chemical structures and important biological activities has been found in a diversity of sea invertebrates. For that, to exist a huger interest on the biotechnology field in the research theses sulfated compounds isolated from sea organisms. Despite the privileged brazilian position for these compounds attainment, there are still a few scientific informations about the isolated substances and their biological activities. A head the displayed, the present work has for objectives, to evaluate the pharmacological properties of the glycosaminoglycans isolated from the sea shrimp Litopenaeus schimitti on homeostasis, blood coagulation, leukocytes migration and platelet/leukocyte adhesion. For this, yhe glycosaminoglycans were extracted from crustacean tissues by proteolysis, fractionation with acetone and later submitted to pharmacological assays. The crustacean tissues showed compounds heparin-like, with anticoagulant activity of 45 IU/mg and 90 IU/mg, respectively. These molecules showed low residual hemorrhagic effects in the tested concentration (100 µg/mL), when compared to unfractionated commercial heparin (UFH). Another dermatan sulfate-like compound, predominately constituted for disulfated disaccharides, was isolated from crustacean abdomen. This compound showed an efficient effect on leukocytes migration inhibition, in the concentration of 15 µg/mL, reducing the cellular infiltration in 65% when compared to the controlled animals. In this same concentration, the DS reduced in 60% the protein concentration of the peritoneal exudates. In the concentration, this compound of 0.5 mg/mL, it was capable to reduce in 40% platelet/leukocytes adhesion. Our data demonstrate that these sulfated polysaccharides isolated from the shrimp L. schimitti will can be used as bioactive compounds, appearing as active principles for pharmacological development, anticoagulants and inflammatory response regulators

Uma metodologia para a análise do desempenho sustentável dos postos de revenda de combustível na cidade de Natal/RN, com o uso de data envelopment analysis-DEA

The increasing use of fossil fuels in line with cities demographic explosion carries out to huge environmental impact in society. For mitigate these social impacts, regulatory requirements have positively influenced the environmental consciousness of society, as well as, the strategic behavior of businesses. Along with this environmental awareness, the regulatory organs have conquered and formulated new laws to control potentially polluting activities, mostly in the gas stations sector. Seeking for increasing market competitiveness, this sector needs to quickly respond to internal and external pressures, adapting to the new standards required in a strategic way to get the Green Badge . Gas stations have incorporated new strategies to attract and retain new customers whom present increasingly social demand. In the social dimension, these projects help the local economy by generating jobs and income distribution. In this survey, the present research aims to align the social, economic and environmental dimensions to set the sustainable performance indicators at Gas Stations sector in the city of Natal/RN. The Sustainable Balanced Scorecard (SBSC) framework was create with a set of indicators for mapping the production process of gas stations. This mapping aimed at identifying operational inefficiencies through multidimensional indicators. To carry out this research, was developed a system for evaluating the sustainability performance with application of Data Envelopment Analysis (DEA) through a quantitative method approach to detect system s efficiency level. In order to understand the systemic complexity, sub organizational processes were analyzed by the technique Network Data Envelopment Analysis (NDEA) figuring their micro activities to identify and diagnose the real causes of overall inefficiency. The sample size comprised 33 Gas stations and the conceptual model included 15 indicators distributed in the three dimensions of sustainability: social, environmental and economic. These three dimensions were measured by means of classical models DEA-CCR input oriented. To unify performance score of individual dimensions, was designed a unique grouping index based upon two means: arithmetic and weighted. After this, another analysis was performed to measure the four perspectives of SBSC: learning and growth, internal processes, customers, and financial, unifying, by averaging the performance scores. NDEA results showed that no company was assessed with excellence in sustainability performance. Some NDEA higher efficiency Gas Stations proved to be inefficient under certain perspectives of SBSC. In the sequence, a comparative sustainable performance and assessment analyzes among the gas station was done, enabling entrepreneurs evaluate their performance in the market competitors. Diagnoses were also obtained to support the decision making of entrepreneurs in improving the management of organizational resources and promote guidelines the regulators. Finally, the average index of sustainable performance was 69.42%, representing the efforts of the environmental suitability of the Gas station. This results point out a significant awareness of this segment, but it still needs further action to enhance sustainability in the long term

Influência da laparoscopia e da laparotomia na gasometria, leucometria diferencial e citocinas em modelo de sepse abdominal em ratos

Laparoscopic surgery is associated with reduced surgical trauma, and less acute phase response, as compared with open surgery. Cytokines are important regulators of the biological response to surgical and anesthetic stress. The aim of this study was to determine if CO2 pneumoperitoneum would change cytokine expression, gas parameters and leukocyte count in septic rats. Methods: Wistar rats were randomly assigned to five groups: control (anesthesia only), laparotomy, CO2 pneumoperitoneum, cecum ligation and puncture by laparotomy, and laparoscopic cecum ligation and puncture. After 30 min of the procedures, arterial blood samples were obtained to determine leukocytes subpopulations by hemocytometer. TNFα, IL-1β, IL-6 were determined in intraperitoneal fluid (by ELISA). Gas parameters were measured on arterial blood, intraperitoneal and subperitoneal exsudates. Results: Peritoneal TNFα, IL-1β and IL-6 concentrations were lower in pneumoperitoneum rats than in all other groups (p<0.05). TNFα, IL-1β and IL-6 expression was lower in the laparoscopic than in laparotomic sepsis (p<0.05). Rats from laparoscopic cecum ligation and puncture group developed significant hypercarbic acidosis in blood and subperitoneal fluid when compared to open procedure group. Total white blood cells and lymphocytes were significantly lower in laparoscopic cecum ligation and puncture rats than in the laparotomic (p<0.01). Nevertheless, the laparotomic cecum ligation rats had a significant increase in blood neutrophils and eosinophils when compared with controls (p<0.05). Conclusions: This study demonstrates that the CO2 pneumoperitoneum reduced the inflammatory and immune response in an animal model of peritonitis with respect to intraperitoneal cytokines, white blood cell count and clinical correlates of sepsis. The pneumoperitoneum produced hypercarbic acidosis in septic animals

Calli induction in leaf explants of coffee elite genotypes

Visando a alcançar alta eficiência na indução de calos a partir de explantes foliares de plantas matrizes de C. arabica com alta heterozigose, por meio da embriogênese somática indireta, foram instalados três experimentos. O primeiro experimento foi conduzido em esquema fatorial 2x5, constituído de dois meios de cultura (BOXTEL & BERTHOULY, 1996 e TEIXEIRA et al., 2004) e cinco genótipos de C. arabica. No segundo experimento, foi avaliado o potencial de produção de calos embriogênicos em 10 genótipos, sendo cada genótipo considerado como um tratamento e, no terceiro experimento, foram avaliadas as variações nas concentrações de 2.4-D (2,5 e 20µM) e 2-iP (2,5 e 20µM) nos meios primário e secundário de TEIXEIRA et al. (2004). As culturas foram mantidas a 25oC, sob obscuridade. Para os genótipos 2.2 e 7.2, verificou-se a superioridade do meio de cultura Teixeira et al. (2004) em relação ao meio BOXTEL & BERTHOULY (1996). No genótipo 4.2, observou-se o comportamento inverso, ou seja, a superioridade do meio BOXTEL & BERTHOULY (1996). Os genótipos 3.0 e 5.0 apresentaram o mesmo comportamento em ambos os meios de cultura estudados, evidenciando que a produção de embriões somáticos é fortemente dependente do genótipo. A indução de calos depende da relação de 2-iP e 2.4-D. A combinação de 20.0µM of 2.4-D e 20.0µM of 2-iP promoveu a maior porcentagem de indução de calos embriogênicos.

Desbaste da limeira-ácida-'Tahiti' (Citrus latifolia Tanaka) com TPA e efeitos na produção

Foram avaliadas concentrações de 0; 10; 20; 40 e 80 mg/L do 3,5,6-TPA (Ácid 3,5,6-tricloro-2-piridil- oxiacético), em sua formulação éster, para desbaste de frutos novos da limeira-ácida-'Tahiti' (Citrus latifolia Tanaka), nas condições ecológicas do Estado de São Paulo. O 3,5,6-TPA, na concentração 10mg/L, foi o tratamento mais eficaz para uso na cultura. Concentrações maiores causaram severos danos às plantas. Essa concentração, aplicada logo após a florada de outubro, reduziu em 65% a produção do mês de fevereiro seguinte. Todavia, as produções dos meses subseqüentes não diferiram entre si. A concentração de 10mg/L causou alongamento dos frutos, aumento da espessura da casca e redução do Brix, na época da colheita.

Efeito de giberelina (GA3) e do bioestimulante 'Stimulate' na indução floral e produtividade do maracujazeiro-amarelo em condições de safra normal

O objetivo do trabalho foi avaliar os efeitos de GA3, nas concentrações de 100; 200 e 300mg L-1 e do bioestimulante Stimulate®, em doses de 2,08; 4,17 e 6,25mL L-1, em duas aplicações via foliar, acrescidas de espalhante adesivo Silwett® a 0,05% e a exposição dos ramos à luminosidade, na indução floral e produtividade do maracujazeiro-amarelo, em condições de safra normal, em Araguari-MG. Aos 30 dias após a primeira aplicação dos tratamentos, iniciaram-se as avaliações do número de flores, com contagens diárias, nos dois lados da espaldeira, nos meses de setembro de 2002 a março de 2003. As colheitas dos frutos foram realizadas semanalmente, no período de novembro de 2002 a abril de 2003, observando-se a produção. O GA3 e o Stimulate não proporcionaram efeito significativo no número de flores, nas sete épocas, assim como no número total de flores. Não houve efeito dos tratamentos para a produtividade e produção total de frutos. Os ramos sob luminosidade pela tarde apresentaram maior número de flores, nos meses de setembro, dezembro, fevereiro e março. A interação entre os tratamentos e a exposição dos ramos à luminosidade não foi significativa para o número de flores, nas épocas avaliadas.

Development and silk production by silkworm larvae after topical application of methoprene

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Florescimento em cana-de-açúcar

O florescimento da cana-de-açúcar é um processo fisiológico complexo formado por vários estádios de desenvolvimento, e cada estádio tem a sua própria necessidade ambiental e fisiológica. Os fatores externos relacionados com o florescimento são: fotoperíodo, temperatura, umidade e radiação solar, além da fertilidade do solo. Por outro lado, os fatores internos envolvem fitocromo, hormônios, florígeno, ácidos nucleicos, dentre outros. A intensidade do processo de florescimento e as consequências na qualidade da cana-de-açúcar variam com a variedade e com o clima. A redução do volume de caldo é o principal fator no qual o florescimento interfere, resultante do aumento do teor de fibras. Como as demais Poaceae, a cana-de-açúcar floresce, frutifica e morre, garantindo a perpetuação da espécie. Dessa forma, o homem procura interferir na natureza tentando evitar o florescimento da cana-de-açúcar, seja por meio de melhoramento genético ou por meio de reguladores vegetais. em áreas comerciais de produção de cana-de-açúcar, onde há condições ideais para o florescimento da cultura, é recomendado o uso de variedade com potencial menos florífero. E, quando não é possível esse manejo varietal, o uso de inibidores do florescimento é a melhor alternativa para evitar mais perdas no conteúdo de sacarose.

Efeito do paclobutrazol e de ácido giberélico na indução floral do maracujazeiro-amarelo em condições de entressafra

Objetivou-se estudar os efeitos de ácido giberélico (GA3) (i.a.), nas concentrações de 50 e 100 mg L-1, acrescido do espalhante adesivo Extravon® a 0,05%, em duas aplicações via foliar e do paclobutrazol (PBZ) (i.a.), em doses de 2 e 4 g por planta, aplicado via solo, em uma única aplicação, na antecipação da floração do maracujazeiro-amarelo, em Araguari-MG. O delineamento experimental empregado foi em parcelas subdivididas, com cinco tratamentos (parcelas) e dois tratamentos (subparcelas), com quatro repetições e quatro plantas por parcela. Foram identificados 12 ramos terciários por parcela, com seis ramos expostos à luminosidade predominante pela manhã e seis com luminosidade predominante à tarde. Avaliaram-se os dois lados da espaldeira aos 103 dias após a primeira aplicação dos tratamentos, observando-se o comprimento dos ramos e de entrenós, número de nós e de botões florais. Os reguladores não promoveram respostas significativas para o comprimento dos entrenós e o número de botões florais. Porém, observaram-se indícios de maior número de botões florais com PBZ 2 g. O maior comprimento dos ramos foi obtido com GA3 100 mg L-1, sob luminosidade, pela manhã. Ao se compararem os tratamentos nas duas condições de luminosidade, o PBZ 4 g, independentemente da condição de luminosidade, proporcionou o menor comprimento dos ramos.

Micropropagation of fig (Ficus carica L.) 'Roxo de Valinhos' plants

An in vitro protocol for Ficus carica cv. 'Roxo de Valinhos' was optimized. Nodal explants containing two buds were excised from field-grown mature plants, and transferred to different proliferation media consisting of combinations of distinct concentrations of activated charcoal with benzyladenine (BA), kinetin with gibberellic acid (GA(3)), and WPM (woody plant medium) with kinetin. The regular strength of WPM in combination with 0.5 mg l(-1) kinetin was the best condition for shoot proliferation of Ficus carica 'Roxo de Valinhos' plants. The addition of activated charcoal in the medium completely inhibited shoot proliferation. The inclusion of BA in the medium induced excessive callus formation as well as small and vitrified shoots, while GA(3) induced excessive elongation associated with vitrification, chlorosis, and tip-burned shoots.

Transgenic lettuce seedlings carrying hepatitis B virus antigen HBsAg

The obtainment of transgenic edible plants carrying recombinant antigens is a desired issue in search for economic alternatives viewing vaccine production. Here we report a strategy for genetic transformation of lettuce plants (Lactuca sativa L.) using the surface antigen HBsAg of hepatitis B virus. Transgenic lettuce seedlings were obtained through the application of a regulated balance of plant growth regulators. Genetic transformation process was acquired by cocultivation of cotyledons with Agrobacterium tumefaciens harboring the recombinant plasmid. It is the first description of a lettuce Brazilian variety Vitória de Verão genetically modified.

Proteome of the phytopathogen Xanthomonas citri subsp citri: a global expression profile

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Uso de técnicas de otimização baseadas em derivadas como suporte do planejamento operacional de redes de distribuição de energia elétrica

The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developing the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. It s important to point out that, in spite of the loads being normally connected to the transformer s secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity

Efeitos de três análogos do hormônio juvenil aplicados em bicho-da-seda, Bombyx mori L. (Lepidoptera: Bombycidae)

Análogos do hormônio juvenil (AHJ) têm sido testados como reguladores de crescimento de Bombyx mori L., com vistas ao incremento da produção de casulos. Esses produtos, quando aplicados em doses adequadas, prolongam o período larval. Os efeitos da aplicação de AHJ podem variar com o produto, a linhagem e o momento de aplicação. Este estudo teve por objetivo avaliar o efeito da aplicação tópica, em diferentes momentos, de três análogos do hormônio juvenil sobre o crescimento dos insetos e a produção de seda da linhagem brasileira C115xN108 do bicho-da-seda. Os produtos piriproxifem, metoprene e fenoxicarbe foram aplicados em larvas do bicho-da-seda a 24h, 48h, 72h e 96h após o início do quinto ínstar (HQI) e seus efeitos sobre características biológicas larvais e adultas e a produção de seda foram avaliados. Independentemente do momento de aplicação, os três produtos afetaram todos os parâmetros avaliados. A reserva de nutrientes acumulada durante o período larval prolongado dos insetos tratados foi destinada ao crescimento das glândulas sericígenas e, também, convertida em peso corporal, com conseqüentes incrementos na produção de seda. Aplicações entre 48 e 72 HQI provocaram os maiores incrementos na biomassa e na produção de casulos de B. mori. Variações no momento de aplicação de 24h e 96h não influenciaram a emergência ou a oviposição de adultos de B. mori, nem a viabilidade dos ovos.

Uso de técnicas de otimização baseadas em derivadas como suporte do planejamento operacional de redes de distribuição de energia elétrica

The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developping the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. Its important to point out that, in spite of the loads being normally connected to the transformers secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity