Design and synthesis of efficient mac architectures for high speed decimal processor

Most of the commercial and financial data are stored in decimal fonn. Recently, support for decimal arithmetic has received increased attention due to the growing importance in financial analysis, banking, tax calculation, currency conversion, insurance, telephone billing and accounting. Performing decimal arithmetic with systems that do not support decimal computations may give a result with representation error, conversion error, and/or rounding error. In this world of precision, such errors are no more tolerable. The errors can be eliminated and better accuracy can be achieved if decimal computations are done using Decimal Floating Point (DFP) units. But the floating-point arithmetic units in today's general-purpose microprocessors are based on the binary number system, and the decimal computations are done using binary arithmetic. Only few common decimal numbers can be exactly represented in Binary Floating Point (BF P). ln many; cases, the law requires that results generated from financial calculations performed on a computer should exactly match with manual calculations. Currently many applications involving fractional decimal data perform decimal computations either in software or with a combination of software and hardware. The performance can be dramatically improved by complete hardware DFP units and this leads to the design of processors that include DF P hardware.VLSI implementations using same modular building blocks can decrease system design and manufacturing cost. A multiplexer realization is a natural choice from the viewpoint of cost and speed.This thesis focuses on the design and synthesis of efficient decimal MAC (Multiply ACeumulate) architecture for high speed decimal processors based on IEEE Standard for Floating-point Arithmetic (IEEE 754-2008). The research goal is to design and synthesize deeimal'MAC architectures to achieve higher performance.Efficient design methods and architectures are developed for a high performance DFP MAC unit as part of this research.

Incident-Reporting-Systeme als Möglichkeit zum organisationalem Lernen (nicht nur) aus Fehlern und kritischen Ereignissen

Die vorliegende Dissertation betrachtet institutionsinterne lokale (Critical-)Incident-Reporting-Systeme ((C)IRS) als eine Möglichkeit zum Lernen aus Fehlern und unerwünschten kritischen Ereignissen (sogenannte Incidents) im Krankenhaus. Die Notwendigkeit aus Incidents zu lernen, wird im Gesundheitswesen bereits seit den 1990er Jahren verstärkt diskutiert. Insbesondere risikoreichen Organisationen, in denen Incidents fatale Konsequenzen haben können, sollten umfassende Strategien erarbeiten, die sie vor Fehlern und unerwünschten Ereignissen schützen und diese als Lernpotenzial nutzen können. Dabei können lokale IRS als ein zentraler Bestandteil des Risikomanagements und freiwillige Dokumentationssysteme im Krankenhaus ein Teil dieser Strategie sein. Sie können eine Ausgangslage für die systematische Erfassung und Auswertung von individuellen Lerngelegenheiten und den Transfer zurück in die Organisation schaffen. Hierfür sind eine lernförderliche Gestaltung, Implementierung und Einbettung lokaler IRS eine wichtige Voraussetzung. Untersuchungen über geeignete lerntheoretisch fundierte und wirkungsvolle IRS-Modelle und empirische Daten fehlen bisher im deutschsprachigen Raum. Einen entsprechenden Beitrag leistet die vorliegende Fallstudie in einem Schweizer Universitätsspital (800 Betten, 6.100 Mitarbeitende). Zu diesem Zweck wurde zuerst ein Anforderungsprofil an lernförderliche IRS aus der Literatur abgeleitet. Dieses berücksichtigt zum einen literaturbasierte Kriterien für die Gestaltung und Nutzung aus der IRS-Literatur, zum anderen die aus der Erziehungswissenschaft und Arbeitspsychologie entlehnten Gestaltungsbedingungen und Erfolgskriterien an organisationales Lernen. Das Anforderungsprofil wurde in drei empirischen Teilstudien validiert und entsprechend adaptiert. In der ersten empirischen Teilstudie erfolgte eine Standortbestimmung der lokalen IRS. Die Erhebung erfolgte in vier Kliniken mittels Dokumentenanalyse, leitfadengestützter Interviews (N=18), sieben strukturierter Gruppendiskussionen und teilnehmender Beobachtungen über einen Zeitraum von 22 Monaten. Erfolgskritische IRS-Merkmale wurden identifiziert mit dem Ziel einer praxisgerechten lernförderlichen Systemgestaltung und Umsetzung von Incident Reporting unter Betrachtung von organisationalen Rahmenbedingungen, Lernpotenzialen und Barrieren. Die zweite Teilstudie untersuchte zwei Fallbeispiele organisationalen Lernens mittels Prozessbegleitung, welche zu einem verwechslungssicheren Design bei einem Medizinalprodukt und einer verbesserten Patientenidentifikation in Zusammenhang mit Blutentnahmen führten. Für das organisationale Lernen im Spital wurden dabei Chancen, Barrieren und Gestaltungsansätze abgeleitet, wie erwünschte Veränderungen und Lernen unter Nutzung von IRS initiiert werden können und dabei ein besseres Gesundheitsresultat erreicht werden kann. Die dritte Teilstudie überprüfte, inwiefern die Nutzung und Implementierung lokaler IRS mittels einer Mitarbeitervollbefragung zur Sicherheitskultur gefördert werden kann. Hierfür wurde eine positive Interaktion, zwischen einer starken Sicherheitskultur und der Bereitschaft ein IRS zu implementieren und Incidents zu berichten, angenommen. Zum Einsatz kam eine deutschsprachige Version des Hospital Survey on Patient Safety Culture (Patientensicherheitsklimainventar) mit einem Rücklauf von 46.8% (2.897 gültige Fragebogen). In 23 von 37 Kliniken führte laut einer Nachbefragung die Sicherheitskulturbefragung zum Implementierungsentscheid. Dies konnte durch Monitoring der IRS-Nutzung bestätigt werden. Erstmals liegen mit diesen Studien empirische Daten für eine wirkungsvolle und lernförderliche Gestaltung und Umsetzung von lokalen IRS am Beispiel einer Schweizer Gesundheitsorganisation vor. Die Ergebnisse der Arbeit zeigen Chancen und Barrieren für IRS als Berichts- und Lernsysteme im Krankenhaus auf. Als Resultat unsachgemäss gestalteter und implementierter IRS konnte dabei vor allem Lernverhinderung infolge IRS aufgezeigt werden. Blinder Aktionismus und eine fehlende Priorisierung von Patientensicherheit, unzureichende Kompetenzen, Qualifikationen und Ressourcen führten dabei zur Schaffung neuer Fehlerquellen mit einer Verstärkung des Lernens erster Ordnung. Eine lernförderliche Gestaltung und Unterhaltung der lokalen IRS, eingebettet in eine klinikumsweite Qualitäts- und Patientensicherheitsstrategie, erwiesen sich hingegen als wirkungsvoll im Sinne eines organisationalen Lernens und eines kontinuierlichen Verbesserungsprozesses. Patientensicherheitskulturbefragungen erwiesen sich zudem bei entsprechender Einbettung als effektives Instrument, um die Implementierung von IRS zu fördern. Zwölf Thesen zeigen in verdichteter Form auf, welche Gestaltungsprinzipien für IRS als Instrument des organisationalen Lernens im Rahmen des klinischen Risikomanagements und zur Förderung einer starken Patientensicherheitskultur zu berücksichtigen sind. Die Erkenntnisse aus den empirischen Studien münden in ein dialogorientiertes Rahmenmodell organisationalen Lernens unter Nutzung lokaler IRS. Die Arbeit zeigt damit zum einen Möglichkeiten für ein Lernen auf den verschiedenen Ebenen der Organisation auf und weist auf die Notwendigkeit einer (Re-)Strukturierung der aktuellen IRS-Diskussion hin.

Chancen und Risiken der Arbeit im E-Business

E-Business, verstanden als ganzheitliche Strategie zur Reorganisation von Geschäftsprozessen, Strukturen und Beziehungen in Unternehmen, bietet für die Arbeitsgestaltung in einer digital vernetzten Welt Chancen und Risiken in Hinblick auf die Humankriterien. Empirische Untersuchungen in 14 Unternehmen zeigen „good practice“-Ansätze im B2B-Feld (Business-to-Business). Untersucht wurden die Tätigkeiten der elektronisch vernetzten Auftragsbearbeitung, des Web-, Content-Managements, der digitalen Druckvorlagenherstellung sowie der CAD- Bauplanzeichnung. Die beobachteten Arbeitsplätze zeigen, dass Arbeitsinhalte eher ganzheitlich und komplex gestaltet sind. Planende, ausführende, kontrollierende und organisierende Anteile weisen auf eine vielfältige Aufgabengestaltung hin, die hohe Anforderungen beinhaltet. Während alle beobachteten Tätigkeiten mit Aufnahme-, Erarbeitungs-, Verarbeitungs-, Übertragungs- und Weitergabeprozessen von Informationen zu tun haben, gibt es Differenzen in Bezug auf den Arbeitsumfang, den Zeitdruck, Fristsetzungen, erwartete Arbeitsleistungen sowie die Planbarkeit der Aufgaben. Die vorgefundenen Aufgabentypen (wenig bis sehr anforderungsreich im Sinne von Denk- und Planungsanforderungen) sind gekennzeichnet durch eine unterschiedlich ausgeprägte Aufgabenkomplexität. Interessant ist, dass, je anforderungsreicher die Aufgabengestaltung, je höher die Aufgabenkomplexität, je größer die Wissensintensität und je niedriger die Planbarkeit ist, desto größer sind die Freiräume in der Aufgabenausführung. Das heißt wiederum, dass bei zunehmenden E-Business-Anteilen mehr Gestaltungsspielräume zur Verfügung stehen. Die bestehenden Chancen auf eine humane Aufgabengestaltung sind umso größer, je höher die E-Business-Anteile in der Arbeit sind. Diese Wirkung findet sich auch bei einem Vergleich der Aufgabenbestandteile wieder. Die negativen Seiten des E-Business zeigen sich in den vorgefundenen Belastungen, die auf die Beschäftigten einwirken. Diskutiert wird die Verschiebung von körperlichen hin zu psychischen und vorrangig informatorischen Belastungen. Letztere stellen ein neues Belastungsfeld dar. Ressourcen, auf welche die Mitarbeiter zurückgreifen können, sind an allen Arbeitsplätzen vorhanden, allerdings unterschiedlich stark ausgeprägt. Personale, organisationale, soziale, aufgabenbezogene und informatorische Ressourcen, die den Beschäftigten zur Verfügung stehen, werden angesprochen. In Bezug auf die Organisationsgestaltung sind positive Ansätze in den untersuchten E-Business-Unternehmen zu beobachten. Der Großteil der untersuchten Betriebe hat neue Arbeitsorganisationskonzepte realisiert, wie die vorgefundenen kooperativen Organisationselemente zeigen. Die kooperativen Organisationsformen gehen allerdings nicht mit einer belastungsärmeren Gestaltung einher. Das vorgefundene breite Spektrum, von hierarchisch organisierten Strukturen bis hin zu prozess- und mitarbeiterorientierten Organisationsstrukturen, zeigt, dass Organisationsmodelle im E-Business gestaltbar sind. Neuen Anforderungen kann insofern gestaltend begegnet und somit die Gesundheit und das Wohlbefinden der Mitarbeiter positiv beeinflusst werden. Insgesamt betrachtet, zeigt E-Business ein ambivalentes Gesicht, das auf der Basis des MTO-Modells (Mensch-Technik-Organisation) von Uhlich (1994) diskutiert wird, indem vernetzte Arbeitsprozesse auf personeller, technischer sowie organisationaler Ebene betrachtet werden. E-business, seen as more than only the transformation of usual business processes into digital ones, furthermore as an instrument of reorganisation of processes and organisation structures within companies, offers chances for a human oriented work organisation. Empirical data of 14 case studies provide good practice approaches in the field of B2B (Business-to-Business). The observed work contents show, that tasks (e.g. order processing, web-, contentmanagement, first print manufacturing and architectural drawing) are well arranged. Executive, organising, controlling and coordinating parts constitute a diversified work content, which can be organised with high demands. Interesting is the result, that the more e-business-parts are within the work contents, on the one hand the higher are the demands of the type of work and on the other hand the larger is the influence on workmanship. The observed enterprises have realised new elements of work organisation, e.g. flexible working time, cooperative leadership or team work. The direct participation of the employees can be strengthened, in particular within the transformation process. Those companies in which the employees were early and well informed about the changes coming up with e-business work, the acceptance for new technique and new processes is higher than in companies which did not involve the person concerned. Structured in an ergonomic way, there were found bad patterns of behaviour concerning ergonomic aspects, because of missing knowledge regarding work-related ergonomic expertise by the employees. E-business indicates new aspects concerning requirements – new in the field of informational demands, as a result of poorly conceived technical balance in the researched SME. Broken systems cause interruptions, which increase the pressure of time all the more. Because of the inadequate usability of software-systems there appear in addition to the informational strains also elements of psychological stress. All in all, work contents and work conditions can be shaped and as a result the health and well-being of e-business-employees can be influenced: Tasks can be structured and organised in a healthfulness way, physiological strain and psychological stress are capable of being influenced, resources are existent and developable, a human work design within e-business structures is possible. The ambivalent face of e-business work is discussed on the basis of the MTO- (Mensch-Technik-Organisation) model (Ulich 1994). Thereby new and interesting results of researches are found out, concerning the personal/human side, the technical side and the organisational side of e-business work.

Context as a Service

In the vision of Mark Weiser on ubiquitous computing, computers are disappearing from the focus of the users and are seamlessly interacting with other computers and users in order to provide information and services. This shift of computers away from direct computer interaction requires another way of applications to interact without bothering the user. Context is the information which can be used to characterize the situation of persons, locations, or other objects relevant for the applications. Context-aware applications are capable of monitoring and exploiting knowledge about external operating conditions. These applications can adapt their behaviour based on the retrieved information and thus to replace (at least a certain amount) the missing user interactions. Context awareness can be assumed to be an important ingredient for applications in ubiquitous computing environments. However, context management in ubiquitous computing environments must reflect the specific characteristics of these environments, for example distribution, mobility, resource-constrained devices, and heterogeneity of context sources. Modern mobile devices are equipped with fast processors, sufficient memory, and with several sensors, like Global Positioning System (GPS) sensor, light sensor, or accelerometer. Since many applications in ubiquitous computing environments can exploit context information for enhancing their service to the user, these devices are highly useful for context-aware applications in ubiquitous computing environments. Additionally, context reasoners and external context providers can be incorporated. It is possible that several context sensors, reasoners and context providers offer the same type of information. However, the information providers can differ in quality levels (e.g. accuracy), representations (e.g. position represented in coordinates and as an address) of the offered information, and costs (like battery consumption) for providing the information. In order to simplify the development of context-aware applications, the developers should be able to transparently access context information without bothering with underlying context accessing techniques and distribution aspects. They should rather be able to express which kind of information they require, which quality criteria this information should fulfil, and how much the provision of this information should cost (not only monetary cost but also energy or performance usage). For this purpose, application developers as well as developers of context providers need a common language and vocabulary to specify which information they require respectively they provide. These descriptions respectively criteria have to be matched. For a matching of these descriptions, it is likely that a transformation of the provided information is needed to fulfil the criteria of the context-aware application. As it is possible that more than one provider fulfils the criteria, a selection process is required. In this process the system has to trade off the provided quality of context and required costs of the context provider against the quality of context requested by the context consumer. This selection allows to turn on context sources only if required. Explicitly selecting context services and thereby dynamically activating and deactivating the local context provider has the advantage that also the resource consumption is reduced as especially unused context sensors are deactivated. One promising solution is a middleware providing appropriate support in consideration of the principles of service-oriented computing like loose coupling, abstraction, reusability, or discoverability of context providers. This allows us to abstract context sensors, context reasoners and also external context providers as context services. In this thesis we present our solution consisting of a context model and ontology, a context offer and query language, a comprehensive matching and mediation process and a selection service. Especially the matching and mediation process and the selection service differ from the existing works. The matching and mediation process allows an autonomous establishment of mediation processes in order to transfer information from an offered representation into a requested representation. In difference to other approaches, the selection service selects not only a service for a service request, it rather selects a set of services in order to fulfil all requests which also facilitates the sharing of services. The approach is extensively reviewed regarding the different requirements and a set of demonstrators shows its usability in real-world scenarios.

Model-Based Troubleshooting of Digital Systems

This thesis describes a methodology, a representation, and an implemented program for troubleshooting digital circuit boards at roughly the level of expertise one might expect in a human novice. Existing methods for model-based troubleshooting have not scaled up to deal with complex circuits, in part because traditional circuit models do not explicitly represent aspects of the device that troubleshooters would consider important. For complex devices the model of the target device should be constructed with the goal of troubleshooting explicitly in mind. Given that methodology, the principal contributions of the thesis are ways of representing complex circuits to help make troubleshooting feasible. Temporally coarse behavior descriptions are a particularly powerful simplification. Instantiating this idea for the circuit domain produces a vocabulary for describing digital signals. The vocabulary has a level of temporal detail sufficient to make useful predictions abut the response of the circuit while it remains coarse enough to make those predictions computationally tractable. Other contributions are principles for using these representations. Although not embodied in a program, these principles are sufficiently concrete that models can be constructed manually from existing circuit descriptions such as schematics, part specifications, and state diagrams. One such principle is that if there are components with particularly likely failure modes or failure modes in which their behavior is drastically simplified, this knowledge should be incorporated into the model. Further contributions include the solution of technical problems resulting from the use of explicit temporal representations and design descriptions with tangled hierarchies.

A Concurrent Smalltalk Compiler for the Message-Driven Processor

This thesis describes Optimist, an optimizing compiler for the Concurrent Smalltalk language developed by the Concurrent VLSI Architecture Group. Optimist compiles Concurrent Smalltalk to the assembly language of the Message-Driven Processor (MDP). The compiler includes numerous optimization techniques such as dead code elimination, dataflow analysis, constant folding, move elimination, concurrency analysis, duplicate code merging, tail forwarding, use of register variables, as well as various MDP-specific optimizations in the code generator. The MDP presents some unique challenges and opportunities for compilation. Due to the MDP's small memory size, it is critical that the size of the generated code be as small as possible. The MDP is an inherently concurrent processor with efficient mechanisms for sending and receiving messages; the compiler takes advantage of these mechanisms. The MDP's tagged architecture allows very efficient support of object-oriented languages such as Concurrent Smalltalk. The initial goals for the MDP were to have the MDP execute about twenty instructions per method and contain 4096 words of memory. This compiler shows that these goals are too optimistic -- most methods are longer, both in terms of code size and running time. Thus, the memory size of the MDP should be increased.

Pi: A Parallel Architecture Interface for Multi-Model Execution

This thesis defines Pi, a parallel architecture interface that separates model and machine issues, allowing them to be addressed independently. This provides greater flexibility for both the model and machine builder. Pi addresses a set of common parallel model requirements including low latency communication, fast task switching, low cost synchronization, efficient storage management, the ability to exploit locality, and efficient support for sequential code. Since Pi provides generic parallel operations, it can efficiently support many parallel programming models including hybrids of existing models. Pi also forms a basis of comparison for architectural components.

Assembly Design and Evaluation in an Augmented Reality Environment

The technologies and methodologies of assembly design and evaluation in the early design stage are highly significant to product development. This paper looks at a promising technology to mix real components (e.g. physical prototypes, assembly tools, machines, etc.) with virtual components to create an Augmented Reality (AR) interface for assembly process evaluation. The goal of this paper is to clarify the methodologies and enabling technologies of how to establish an AR assembly simulation and evaluation environment. The architecture of an AR assembly system is proposed and the important functional modules including AR environment set-up, design for assembly (DFA) analysis and AR assembly sequence planning in an AR environment are discussed in detail.

Experimental Modeling and Control Strategies on an Open Mobile Robot Platform PRIM

This research work deals with the problem of modeling and design of low level speed controller for the mobile robot PRIM. The main objective is to develop an effective educational tool. On one hand, the interests in using the open mobile platform PRIM consist in integrating several highly related subjects to the automatic control theory in an educational context, by embracing the subjects of communications, signal processing, sensor fusion and hardware design, amongst others. On the other hand, the idea is to implement useful navigation strategies such that the robot can be served as a mobile multimedia information point. It is in this context, when navigation strategies are oriented to goal achievement, that a local model predictive control is attained. Hence, such studies are presented as a very interesting control strategy in order to develop the future capabilities of the system

Data-Driven Text Generation using Neural Networks & Provenance is Complicated and Boring — Is there a solution?

Title: Data-Driven Text Generation using Neural Networks Speaker: Pavlos Vougiouklis, University of Southampton Abstract: Recent work on neural networks shows their great potential at tackling a wide variety of Natural Language Processing (NLP) tasks. This talk will focus on the Natural Language Generation (NLG) problem and, more specifically, on the extend to which neural network language models could be employed for context-sensitive and data-driven text generation. In addition, a neural network architecture for response generation in social media along with the training methods that enable it to capture contextual information and effectively participate in public conversations will be discussed. Speaker Bio: Pavlos Vougiouklis obtained his 5-year Diploma in Electrical and Computer Engineering from the Aristotle University of Thessaloniki in 2013. He was awarded an MSc degree in Software Engineering from the University of Southampton in 2014. In 2015, he joined the Web and Internet Science (WAIS) research group of the University of Southampton and he is currently working towards the acquisition of his PhD degree in the field of Neural Network Approaches for Natural Language Processing. Title: Provenance is Complicated and Boring — Is there a solution? Speaker: Darren Richardson, University of Southampton Abstract: Paper trails, auditing, and accountability — arguably not the sexiest terms in computer science. But then you discover that you've possibly been eating horse-meat, and the importance of provenance becomes almost palpable. Having accepted that we should be creating provenance-enabled systems, the challenge of then communicating that provenance to casual users is not trivial: users should not have to have a detailed working knowledge of your system, and they certainly shouldn't be expected to understand the data model. So how, then, do you give users an insight into the provenance, without having to build a bespoke system for each and every different provenance installation? Speaker Bio: Darren is a final year Computer Science PhD student. He completed his undergraduate degree in Electronic Engineering at Southampton in 2012.

Assessment of the usability of the 'alpha' version of the prototype 'Octopus'-application of the heuristic evaluation model of user's graphic interfaces. 'Evaluación de la utilidad de la versión 'alfa' del prototipo 'Octopus'-uso del modelo de evaluación heurístico de los interfaces gráficos del usuario'.

Resumen basado en el de la publicación

A design of benchmarking method for assessing performance of e-Government systems

This paper is an initial work towards developing an e-Government benchmarking model that is user-centric. To achieve the goal then, public service delivery is discussed first including the transition to online public service delivery and the need for providing public services using electronic media. Two major e-Government benchmarking methods are critically discussed and the need to develop a standardized benchmarking model that is user-centric is presented. To properly articulate user requirements in service provision, an organizational semiotic method is suggested.