954 resultados para Lourenço Filho, Manoel Bergström, 1897-1970


Relevância:

20.00% 20.00%

Publicador:

Resumo:

O presente trabalho foi desenvolvido com o objetivo de verificar a influência do uso contínuo de vários herbicidas residuais, sobre a distribuição das radicelas de laranjeiras Natal (Citrus sinensis (L.) Osbeck) enxertadas sobre limão Cravo (Cithus limonia Osbeck) e plantadas em janeiro de 1970. O experimento foi instalado no pomar de produção da Faculdade de Ciências Agrárias e Veterinárias do Campus de Jaboticabal (UNESP), em Latossol Roxo distrófico, com 1,6% de matéria orgânica e 51% de argila. O delineamento experimental utilizado foi o de blocos ao acaso, dentro de um esquema fatorial 11x 3x2x2, com três repetições. Os tratamentos utilizados, com as respectivas doses em kg do i.a/ha foram: fluometuron a 4,2; simazíne a 4,8; atrazine a 4,8; bromacil a 3,2;bromacil (40%) + diuron (40%) a 4,8; bromacil (53,3%) + diuron (27,6%) a 4,8; terbacil a 3,2; oxadiazon a 1,5; dichlobenil a 3,0 e 6,0; além de uma testemunha capinada. O estudo das radicel as foi feito pelo método do trado, tendo sido tomadas amostras de solo contendo radicelas, nas distâncias de 80, 160 e 240 cm do tronco, nas camadas de 0 a 15 cm e 15 a 30 cm de profundidade e em duas direções distintas (entrelinhas e entreplantas). Os resultados mostraram que as radicelas localizam-se superficialmente, com 70% delas nos primeiros 15 cm, do total encontrado na camada superficial de 0 a 30 cm de profundidade do solo. Cerca de 75% das radicelas situam-se até a distância de 160 cm do tronco. Na camada mais superficial do solo (0 a 15 cm), a quantidade de radicelas diminuiu de maneira acentuada, à medida que se afastou do tronco. Na camada de 15 a 30 cm de profundidade, ocorreu uma distribuição horizontal mais uniforme, comparada com a da camada de 0 a 15 cm. As radicelas das plantas do cultivar Natal distribuiram-se uniformemente, tanto na direção das plantas da linha vizinha, quanto nas das plantas de uma mesma linha, para o espaçamento de 7,0 m x 7,2 m. Não se detectaram diferenças estatisticamente significativas nas quantidades de radicelas entre as parcelas dos vários tratamentos com herbicidas, excluindo-se desta forma, qualquer efeito negativo de tais produtos químicos sobre o sistema radicular das laranjeiras.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

El estudio Historia y educación de mujeres indígenas que quedan em Missão do Sahy pretende comprender, a través de recerdos y memorias, la transmisión de costumbres y prácticas educativas de un grupo de mujeres en sus relaciones con la familia, la escuela y la religión. El enfoque teórico-metodológico utilizado fue la Historia Oral, un enfoque que oferece la oportunidad de trabajar con la historia de mujeres y la memoria, tratando de reconstruir algunas de las experiencias de estas mujeres que tienen la custodia de las historias y los conocimientos transmitidos por los antepasados, como activistas en las actividades de la Comunidad, los partidos políticos, en la dirección de las asociaciones de la comunidad y los mantenedoras de la iglesia. La encuesta se realizó en el Distrito de Missão do Sahy, un asentamiento franciscano instalado en 1697 y abolida en 1863, em el territorio de Las Jacobinas, la ciudad de Senhor do Bonfim, en el norte de Bahia. El estudio demostró que todavía hay uma fuerte presencia de la práctica de los Padres Franciscanos, los creadores del pueblo, también mostró que las orientaciones religiosas han contribuido significativamente a fortalecer el papel de la mujer en Missão do Sahy como madre y esposa. Este estudio también mostró que el sesgo afecta a las más jóvenes remanescentes que - ni india ni negra - todavia son victimas de discriminación, un hecho que quizás tiene su origen el desconocimiento de la identidad de estas mujeres. Varios autores han contribuido en este estudio: Halbwachs (2006), Bosi (1994) y Pollak (1989) contribuyó a la construcción del estudio de la memoria, Perrot (1988, 2006, 2007) y Del Piore (2007) proporcionaron la base para la historia de la mujer; Machado y otros autores regionales (1993, 2007), Lourenço Pereira da Silva (1906, 1915), Adolfo Silva (1971), Edith Davis (1997), Joseph Davis (2001), Da Paz (2001, 2004), Oro (2008) , Santos (2007), Araujo (2002) y (2008 Vieira Filho) contribuyeron a la construcción de una historiografía de la zona de la investigación. Cronistas Frei Martinho de Nantes (1979) y Frei Venancio Willeke OFM (1994), además de teórico Norbert Elias (1993), de Michel de Certeau (1994) y Philippe Aries (1981), que presentan elementos importantes para el análisis de las pruebas.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The present study aimed to investigate the intellectual, personal and professional tracjetory of José Tavares de Moura Filho. Civil engineer who devoted him self to cartographic cience, though not a cartographer, and to literature. At 65 years old, already with retirement, he devoted his attention to writing his books and see the world, as he said. There were nine books, five of poetry, prose and short stories, and four of cartographic nature. The published his books independently. He wrote and his wife Elza typed. Once ready, he would seek the graphics, later a publisher, to reproduce his writing. He liked to say he would rather to pay for your books than bay a new car, and did so. Died at age of 82 years, leaving a rich material for the young students, those who read, as he always did by dedicating his books. In order to achieve the objectives of this study, we used as a theoretical some authors dealing with historiography, oral history, intellectual intineraries and history of ideas, as Garnica, Nóvoa, Barros, Bosi, Le Goff among others. From this perspective, we constructed an archeology of ideas and the existence of Moura Filho, to point contributions of the teaching of mathematics from his work

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Qualitative study on the meaning of a child s birth to the father. Its general purpose was to comprehend the significance the man attaches to his child s birth and its specific objectives were to identify the man s feelings with regard to his child s birth as well as to verify his attitude toward a child s birth. The study was founded on the theoretical reference system about the man in the gravid-puerperal cycle and the humanization of the assistance. The data were obtained through semistructured interview performed with men accompanying their children s birth whose wives were in the immediate puerperium. This stage occurred in two maternity hospitals in Natal-RN, both of which adopt the principle of safe notherhood in the attendance of women in the process of parturition. The material apprehended from the statements was treated in conformity with the content analysis method in the mode of thematic analysis according to Bardin. Three thematic categories emerged from this process: the father s attitude toward his child s birth, the father s feelings in respect of his child s birth, and the informations received by the father in the course of his child s birth. The speech content was analyzed in accordance with the principles of symbolic interactionism according to Blumer. The results showed that the husbands interact with their respective wives and respond with attitudes of care, help, support, and encouragement within the principles of humanization intermingled with feelings of happiness, restlessness, and suffering leading them to appraise and exalt their consorts. Besides, we verified that the father s attitudes and feelings in the delivery room in the light of symbolic interactionism tend to be influenced by the interaction between him and the attending professionals

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Infrastructure works are included in strategic areas for the social development. For that matter that all of the investments are very important for the social development. When the population has enough water and an acceptable quality, and it includes a wastewater gathering and its treatment, the whole society became less susceptible to the water diseases. Even the Water Supply and the Sewage depend for its perfect operation of reservoirs, or of the accumulation of water to provide the popular necessity, either due to retention or for the treatment wastewarer. These structures present very specific environmental conditions, because the microclimate created around them, like high environmental humidity and for the existence of many harmful substances for the concrete, such as chloride ions presents in water. The reservoir that compose the System of Water Supply of Natal were built between 1970s and 1980s, a period whom the technical and scientific community did not have in-depth studies about the reinforced concrete mechanism of deterioration. Therefore, these reservoirs have been suffered accelerated deterioration progress, and they have been shown many pathological manifestations strikingly visible. In front of all these problems this academic work aims to identify the generally conditions of conservation of all the reservoirs components of the Water Supply System of Natal. This academic work objectives to develop a recuperation plan for use in these reservoirs, in this academic work it was achieved all the survey of pathological manifestation existing in each reservoir. It was made with local visits, photographic recorders of all manifestations viii and realization of in loco tests. The other step consisted in a application of GDE/UnB metodolgy reformulated by Fonseca (2007). In the step of local visits in each reservoir it was evaluated carbonation depth, by spreading a phenolphthalein solution with 1% of concentration; evaluation of contamination of chlorides, by spreading silver nitrate solution with 1% of concentration, and evaluation of width cracks. After the conclusion of all the testings, it was established that all reservoir, studied in this academic work, have showed an advanced deteriorating condition. It´s presents prevalent pathological manifestations as unacceptable cracks, spots, efflorescence and reinforcement corrosion, and in some cases, chlorides contamination. After the conclusion of the testings and its concatenation it was able to implementing, using GDE/UnB methodology, the order of the restoration its service life and initial safety conditions

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developing the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. It s important to point out that, in spite of the loads being normally connected to the transformer s secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This study presents a description of the development model of a representation of simplified grid applied in hybrid load flow for calculation of the voltage variations in a steady-state caused by the wind farm on power system. Also, it proposes an optimal load-flow able to control power factor on connection bar and to minimize the loss. The analysis process on system, led by the wind producer, it has as base given technician supplied by the grid. So, the propose model to the simplification of the grid that allows the necessity of some knowledge only about the data referring the internal network, that is, the part of the network that interests in the analysis. In this way, it is intended to supply forms for the auxiliary in the systematization of the relations between the sector agents. The model for simplified network proposed identifies the internal network, external network and the buses of boulders from a study of vulnerability of the network, attributing them floating liquid powers attributing slack models. It was opted to apply the presented model in Newton-Raphson and a hybrid load flow, composed by The Gauss-Seidel method Zbarra and Summation Power. Finally, presents the results obtained to a developed computational environment of SCILAB and FORTRAN, with their respective analysis and conclusion, comparing them with the ANAREDE

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Eventually, violations of voltage limits at buses or admissible loadings of transmission lines and/or power transformers may occur by the power system operation. If violations are detected in the supervision process, corrective measures may be carried out in order to eliminate them or to reduce their intensity. Loading restriction is an extreme solution and should only be adopted as the last control action. Previous researches have shown that it is possible to control constraints in electrical systems by changing the network topology, using the technique named Corrective Switching, which requires no additional costs. In previous works, the proposed calculations for verifying the ability of a switching variant in eliminating an overload in a specific branch were based on network reduction or heuristic analysis. The purpose of this work is to develop analytical derivation of linear equations to estimate current changes in a specific branch (due to switching measures) by means of few calculations. For bus-bar coupling, derivations will be based on short-circuit theory and Relief Function methodology. For bus-bar splitting, a Relief Function will be derived based on a technique of equivalent circuit. Although systems of linear equations are used to substantiate deductions, its formal solution for each variant, in real time does not become necessary. A priority list of promising variants is then assigned for final check by an exact load flow calculation and a transient analysis using ATP Alternative Transient Program. At last, results obtained by simulation in networks with different features will be presented

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developping the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. Its important to point out that, in spite of the loads being normally connected to the transformers secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The reconfiguration of a distribution network is a change in its topology, aiming to provide specific operation conditions of the network, by changing the status of its switches. It can be performed regardless of any system anomaly. The service restoration is a particular case of reconfiguration and should be performed whenever there is a network failure or whenever one or more sections of a feeder have been taken out of service for maintenance. In such cases, loads that are supplied through lines sections that are downstream of portions removed for maintenance may be supplied by the closing of switches to the others feeders. By classical methods of reconfiguration, several switches may be required beyond those used to perform the restoration service. This includes switching feeders in the same substation or for substations that do not have any direct connection to the faulted feeder. These operations can cause discomfort, losses and dissatisfaction among consumers, as well as a negative reputation for the energy company. The purpose of this thesis is to develop a heuristic for reconfiguration of a distribution network, upon the occurrence of a failure in this network, making the switching only for feeders directly involved in this specific failed segment, considering that the switching applied is related exclusively to the isolation of failed sections and bars, as well as to supply electricity to the islands generated by the condition, with significant reduction in the number of applications of load flows, due to the use of sensitivity parameters for determining voltages and currents estimated on bars and lines of the feeders directly involved with that failed segment. A comparison between this process and classical methods is performed for different test networks from the literature about networks reconfiguration

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work has as main objective to show all the particularities regarding the Three-phase Power Summation Method, used for load flow calculation, in what it says respect to the influence of the magnetic coupling among the phases, as well as to the losses presented in all the existent transformers in the feeder to be analyzed. Besides, its application is detailed in the study of the short-circuits, that happen in the presence of high impedance values, which possess a problem, that is its difficult detection and consequent elimination on the part of common devices of protection. That happens due to the characteristic presented by the current of short¬ circuit, in being generally of the same order of greatness that the load currents. Results of simulations accomplished in several situations will be shown, objectifying a complete analysis of the behavior of the proposed method in several types of short-circuits. Confront of the results obtained by the method with results of another works will be presented to verify its effectiveness

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work aims to predict the total maximum demand of a transformer that will be used in power systems to attend a Multiple Unit Consumption (MUC) in design. In 1987, COSERN noted that calculation of maximum total demand for a building should be different from that which defines the scaling of the input protection extension in order to not overestimate the power of the transformer. Since then there have been many changes, both in consumption habits of the population, as in electrical appliances, so that this work will endeavor to improve the estimation of peak demand. For the survey, data were collected for identification and electrical projects in different MUCs located in Natal. In some of them, measurements were made of demand for 7 consecutive days and adjusted for an integration interval of 30 minutes. The estimation of the maximum demand was made through mathematical models that calculate the desired response from a set of information previously known of MUCs. The models tested were simple linear regressions, multiple linear regressions and artificial neural networks. The various calculated results over the study were compared, and ultimately, the best answer found was put into comparison with the previously proposed model