Determination of three ultraviolet filters in sunscreen formulations and from skin penetration studies by high-performance liquid chromatography

An analytical procedure to quantify 3-benzophenone, octylmethoxycinnamate and octylsalicylate was validated and employed to assess these ultraviolet filters in sunscreen formulations and from skin penetration studies. The effect of the vehicle on the skin retention of these filters was investigated. HPLC and extraction procedure were found to be reliable when obtaining data for the sunscreen formulations and for evaluation skin penetration. The results demonstrated that a cream gel generated higher epidermal concentrations of these filters than a lotion or cream-based formulation. Additionally, when comparing the skin retentions of each filter using the same formulation, 3-benzophenone showed the highest skin retention.

Development of Collaborative Product Structure Management

The purpose of this thesis is to develop an environment or network that enables effective collaborative product structure management among stakeholders in each unit, throughout the entire product lifecycle and product data management. This thesis uses framework models as an approach to the problem. Framework model methods for development of collaborative product structure management are proposed in this study, there are three unique models depicted to support collaborative product structure management: organization model, process model and product model. In the organization model, the formation of product data management system (eDSTAT) key user network is specified. In the process model, development is based on the case company’s product development matrix. In the product model framework, product model management, product knowledge management and design knowledge management are defined as development tools and collaboration is based on web-based product structure management. Collaborative management is executed using all these approaches. A case study from an actual project at the case company is presented as an implementation; this is to verify the models’ applicability. A computer assisted design tool and the web-based product structure manager, have been used as tools of this collaboration with the support of the key user. The current PDM system, eDSTAT, is used as a piloting case for key user role. The result of this development is that the role of key user as a collaboration channel is defined and established. The key user is able to provide one on one support for the elevator projects. Also the management activities are improved through the application of process workflow by following criteria for each project milestone. The development shows effectiveness of product structure management in product lifecycle, improved production process by eliminating barriers (e.g. improvement of two-way communication) during design phase and production phase. The key user role is applicable on a global scale in the company.

Seurantakomponentin kehitys tapahtumankäsittelyjärjestelmään

Tapahtumat ovat perusta monille nykyaikaisille tietoteknisille palveluille. Yksittäinen tapahtuma voidaan nähdä työtehtävänä, joka käsittelevän järjestelmän tulee suorittaa. Tapahtumankäsittely pyrkii pitämään järjestelmän tunnetussa ja ristiriidattomassa tilassa. Tämä toteutetaan pitämällä huolta, että jokainen tapahtuma joko onnistuu tai epäonnistuu kokonaisuudessaan. Tapahtumankäsittelyjärjestelmät ovat kasvaneet ja yhtäaikaisten käsiteltävien tapahtumien määrä noussut palveluiden siirtyessä yhä enemmän tietoverkkoihin. Samalla järjestelmien kehittäminen ja ylläpito vaikeutuvat, jolloin kehittäjät tarvitsevat parempia työkaluja järjestelmän valvontaan. Tapahtumankäsittelyn seuranta pyrkii seuraamaan järjestelmän sisäistä toimintaa yksittäisen tapahtuman tai osatapahtuman tarkkuudella. Riippuen toteutuksesta kehittäjä voi joko tarkkailla järjestelmää reaaliaikaisesti tai jälkikäteen suorituksen perusteella tallennetun seurantatiedon avulla. Työssä esitellään tapahtumanseurantakomponentin suunnitteluprosessi ratkaisuineen, joka mahdollistaa tapahtumien suorituksen tarkkailun, seurantatiedon tallentamisen sekä tulosten tarkastelun jälkikäteen. Työ on toteutettu osaksi Syncron Tech Oy:n Syncware-ohjelmistoalustaa.

Identification of the major fungitoxic component of cinnamon bark oil

The study was done to identify the most active fungitoxic component of cinnamon bark (Cinnamomum zeylanicum) oil that can be used as a marker for standardization of cinnamon extract or oil based natural preservative of stored seeds. Aspergillus flavus and A. ruber were used as test fungi. The hexane extracted crude oil and the hydro-distilled essential oil from cinnamon bark had complete growth inhibition concentration (CGIC) of 300 and 100 µl/l, respectively. Both oils produced three fractions on preparative thin layer silica-gel chromatography plates. The fraction-2 of either oil was the largest and most active, with CGIC of 200 µl/l, but the fungitoxicity was also retained in the other two fractions. The fraction-1 and 3 of the crude oil reduced growth of both the fungal species by 65%, and those of distilled oil by 45% at 200 µl/l. The CGIC of these fractions from both the sources was above 500 µl/l. The gas chromatography and mass spectrometry (GC-MS) of the fraction-2 of the hexane extract revealed that it contained 61% cinnamaldehyde, 29% cinnamic acid, and two minor unidentified compounds in the proportion of 4% and 6%. The GC-MS of the fraction-2 of the distilled oil revealed that it contained 99.1% cinnamaldehyde and 0.9% of an unidentified compound. The CGIC of synthetic cinnamaldehyde was 300 µl/l and that of cinnamic acid above 500 µl/l. The 1:1 mixture of cinnamaldehyde and cinnamic acid had CGIC of 500 µl/l. The data revealed that cinnamaldehyde was the major fungitoxic component of hexane extract and the distilled essential oil of cinnamon bark, while other components have additive or synergistic effects on total fungitoxicity. It is suggested that the natural seed preservative based on cinnamon oil can be standardized against cinnamaldehyde.

Customer knowledge processing in key account management

The ability of the supplier firm to generate and utilise customer-specific knowledge has attracted increasing attention in the academic literature during the last decade. It has been argued the customer knowledge should treated as a strategic asset the same as any other intangible assets. Yet, at the same time it has been shown that the management of customer-specific knowledge is challenging in practice, and that many firms are better at acquiring customer knowledge than at making use of it. This study examines customer knowledge processing in the context of key account management in large industrial firms. This focus was chosen because key accounts are demanding and complex. It is not unusual for a single key account relationship to constitute a complex web of relationships between the supplier and the key account – thus easily leading to the dispersion of customer-specific knowledge in the supplier firm. Although the importance of customer-specific knowledge generation has been widely acknowledged in the literature, surprisingly little attention has been paid to the processes through which firms generate, disseminate and use such knowledge internally for enhancing the relationships with their major, strategically important key account customers. This thesis consists of two parts. The first part comprises a theoretical overview and draws together the main findings of the study, whereas the second part consists of five complementary empirical research papers based on survey data gathered from large industrial firms in Finland. The findings suggest that the management of customer knowledge generated about and form key accounts is a three-dimensional process consisting of acquisition, dissemination and utilization. It could be concluded from the results that customer-specific knowledge is a strategic asset because the supplier’s customer knowledge processing activities have a positive effect on supplier’s key account performance. Moreover, in examining the determinants of each phase separately the study identifies a number of intra-organisational factors that facilitate the process in supplier firms. The main contribution of the thesis lies in linking the concept of customer knowledge processing to the previous literature on key account management. Moreover, given than this literature is mainly conceptual or case-based, a further contribution is to examine its consequences and determinants based on quantitative empirical data.

Diagnosing and developing knowledge management capability –Knowledge management capability in UPM-Kymmene Wood Oy

The purpose of this case study is to clarify how KM (knowledge management) capability is constructed through six different activities and to explore how this capability can be diagnosed and developed in the three case organizations. The study examines the knowledge management capability of the three factories in UPM-Kymmene Wood Oy, a major Finnish plywood producer. Forest industry is usually considered to be quite hierarchical. The importance of leveraging employee skills and knowledge has been recognized in all types of organizations – including those that mainly deal with tangible resources. However, the largest part of empirical knowledge management literature examines KM in so called knowledge-intensive or knowledge-based organizations. This study extends existing literature by providing an in depth case study into assessment and development of KM activities in these three organizations with little awareness of the KM discourse. This subject is analyzed through literature review, theoretical analysis and empirical research in the case organizations. The study also presents a structured method for evaluating KM activities of a company and for diagnosing the main weaknesses that should be developed in order to achieve KM excellence. The results help in understanding how knowledge management capability is constructed and provide insight into developing and exploiting it within an organization.

Simplified sample handing in mass spectrometry based protein research - focus on protein phosphorylation

The human genome comprises roughly 20 000 protein coding genes. Proteins are the building material for cells and tissues, and proteins are functional compounds having an important role in many cellular responses, such as cell signalling. In multicellular organisms such as humans, cells need to communicate with each other in order to maintain a normal function of the tissues within the body. This complex signalling between and within cells is transferred by proteins and their post-translational modifications, one of the most important being phosphorylation. The work presented here concerns the development and use of tools for phosphorylation analysis. Mass spectrometers have become essential tools to study proteins and proteomes. In mass spectrometry oriented proteomics, proteins can be identified and their post-translational modifications can be studied. In this Ph.D. thesis the objectives were to improve the robustness of sample handling methods prior to mass spectrometry analysis for peptides and their phosphorylation status. The focus was to develop strategies that enable acquisition of more MS measurements per sample, higher quality MS spectra and simplified and rapid enrichment procedures for phosphopeptides. Furthermore, an objective was to apply these methods to characterize phosphorylation sites of phosphopeptides. In these studies a new MALDI matrix was developed which allowed more homogenous, intense and durable signals to be acquired when compared to traditional CHCA matrix. This new matrix along with other matrices was subsequently used to develop a new method that combines multiple spectra from different matrises from identical peptides. With this approach it was possible to identify more phosphopeptides than with conventional LC/ESI-MS/MS methods, and to use 5 times less sample. Also, phosphopeptide affinity MALDI target was prepared to capture and immobilise phosphopeptides from a standard peptide mixture while maintaining their spatial orientation. In addition a new protocol utilizing commercially available conductive glass slides was developed that enabled fast and sensitive phosphopeptide purification. This protocol was applied to characterize the in vivo phosphorylation of a signalling protein, NFATc1. Evidence for 12 phosphorylation sites were found, and many of those were found in multiply phosphorylated peptides

Kuorman tasaus web-palvelimissa

Web-palvelussa sivuston suorituskyky muodostaa suuren osan käyttökokemuksen mielekkyydestä. Sivuston ollessa kuormitetumpi kuin normaalisti, saattaa se toimia tavallista hitaammin. Tasaamalla yhden web-palvelimen kuormaa muille palvelimille, joko laitteisto tai ohjelmistopohjaisella kuormantasauksella, voidaan saavuttaa merkittäviä suorituskykyparannuksia koko palvelulle. Teoriaosassa selvitettiin kuormantasaukseen soveltuvien algoritmien toimintaa sekä tietokantapohjaista replikaatiota, joka välittää saamansa tiedon lähes välittömästi toiselle palvelimelle. Apachen kuormantasausmoduuliin sekä sen sisältämiin algoritmeihin luotiin myös katsaus teoriaosassa. Varsinaisessa työssä luotiin Apachen kuormantasauspalvelimen ja kahden suorituspalvelimen avulla toimiva palvelinjärjestelmä. Kuormantasaimeen asennettiin käyttöön tahmeat sessiot, joiden toimintaa selvitettiin Drupal-ohjelman avulla. Apachessa on ollut ongelmia tahmeiden sessioiden kanssa, mutta työssä huomattiin kaiken toimivan mainiosti. Kuormantasaus ja tietokantojen replikaatio toimi, kuten odotettiin.

Saostuman esto prosessiputken pinnalle

Työn tarkoituksena oli tutkia kirjallisuudessa esitettyjen menetelmien soveltuvuutta estää kalsiumkarbonaatin saostuminen PCC – prosessissa paperikonelinjan massansyöttöputkessa. Menetelmien heikkoudet ja toimivuudet arvioitiin lähdetietojen perusteella, joiden perusteella tehtiin johtopäätelmiä niiden toimivuudesta prosessissa ja käytettävyydestä kalsiumkarbonaattisaostuman muodostumiseen. Kirjallisuusselvitys osoittaa, että saostuma voidaan estää kemiallisesti ja sähkökemiallisesti sekä modifioimalla materiaalipintaa. Lisäksi sen muodostuminen voidaan estää ultraääniaaltojen avulla sekä indusoimalla mahdolliseen saostuskohtaan magneetti- tai sähkökenttä. Kokeellisessa osassa keskityttiin kirjallisuuden perusteella tutkimaan kalsiumkarbonaatin saostumista kaupallisilla menetelmillä. Tutkimuksissa käytettiin erilaisia pinnoitemateriaaleja, ultraääniaaltoja sekä magneettikenttää että liuossähkökemiaa. Näiden lisäksi tutkittiin saostumisen kehittymistä putkipinnalle ajan funktiona. Kokeellisten tulosten perusteella kirjallisuudessa esitetyistä menetelmistä ei suoraan mikään sovellu sellaisenaan tutkitussa prosessissa saostuman muodostumisen estoon. Koeparametrien optimointi muuttamalla tunnettuja parametreja prosessitilanteeseen paransi kalsiumkarbonaatin liukoisuutta. Tämän tutkimuksen tuloksena löytyi menetelmäkuvaus, jolla saostumien muodostuminen putkipinnoille voidaan estää.

Characterization and treatment of sisal fiber residues for cement-based composite application

Sisal fiber is an important agricultural product used in the manufacture of ropes, rugs and also as a reinforcement of polymeric or cement-based composites. However, during the fiber production process a large amount of residues is generated which currently have a low potential for commercial use. The aim of this study is to characterize the agricultural residues by the production and improvement of sisal fiber, called field bush and refugo and verify the potentiality of their use in the reinforcement of cement-based composites. The residues were treated with wet-dry cycles and evaluated using tensile testing of fibers, scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy. Compatibility with the cement-based matrix was evaluated through the fiber pull-out test and flexural test in composites reinforced with 2 % of sisal residues. The results indicate that the use of treated residue allows the production of composites with good mechanical properties that are superior to the traditional composites reinforced with natural sisal fibers.

Autokaupan automyynnin volyymiasiakkaiden asiakaskannattavuus

Autoalalla automyynnin transaktiokustannukset ovat merkittävä osa myyntikustannuksista. Yritykset pyrkivät alentamaan näitä kustannuksia hakemalla lisää volyymia ja keskittymällä voimakkaammin volyymikauppoihin. Tämän tutkimuksen tarkoituksena on löytää keinoja, joilla autokaupan volyymimyynnin kannattavuutta voidaan parantaa. Tutkimuksen teoreettisessa viitekehyksessä esitettiin teoriamalleja, joita hyödyntämällä autokaupan kovassa kilpailutilanteessa yritykset voisivat menestyä paremmin. Tutkimusmetodina käytettiin ei-kokeellista tutkimusasetelmaa, jossa tieto kerättiin strukturoiduilla kysymyksillä. Tutkimusaineistoksi saatiin kohdeyrityksessä ja joukosta kilpailevien yritysten henkilöiltä haastattelemalla hankittua tietoa. Johtopäätöksenä voidaan todeta, että autokaupassa liikkeenjohdon teoriat ja käytäntö seurailevat toisiaan osin hyvinkin paljon, vaikka tiettyjä ristiriitoja on havaittavissa. Yritysten tietojärjestelmistä saatavan tiedon laadun parantamisella, sovittujen toimintaprosessien noudattamisella ja olemassa olevia toimintatapoja kyseenalaistamalla volyymikaupan tuottavuutta pystytään jo nyt kohentamaan.

Weak phenotypic reversion of ivermectin resistance in a field resistant isolate of Haemonchus contortus by verapamil

Recent advances in anthelmintic resistant phenotype reversion by Pgp modulating drugs in ruminant nematodes indicate that this can be a useful tool to helminth control. The aim of the present study was to evaluate the efficacy of ivermectin (IVM) in combination with verapamil (VRP), in oil or water-based vehicle, against an IVM-resistant field isolate of Haemonchus contortus through a larval migration assay and experimental infection trial. In the in vitro assay was observed a phenotypic reversion of H. contortus resistance to ivermectin at a high concentration of VRP, increasing IVM efficacy from 53.1% to 94.3. In the in vivo trial, IVM + VRP demonstrated 36.02% efficacy compared to the 7.75% of IVM alone. The vehicle formulation showed no influence in efficacy. These are the first results demonstrating the effect of VRP as a partial IVM-resistance phenotype reverser in a field isolate of IVM-resistant H. contortus experimentally inoculated in sheep.

Electrical Machine Product Development; Transmission to Lean Approach

The requirements set by the market for electrical machines become increasingly demanding requiring more sophisticated technological solutions. Companies producing electrical ma-chines are challenged to develop machines that provide competitive edge for the customer for example through increased efficiency, reliability or some customer specific special requirement. The objective of this thesis is to derive a proposal for the first steps to transform the electrical machine product development process of a manufacturing company towards lean product development. The current product development process in the company is presented together with the processes of four other companies interviewed for the thesis. On the basis of current processes of the electrical machine industry and the related literature, a generalized electrical machine product development process is derived. The management isms and –tools utilized by the companies are analyzed. Adoption of lean Pull-Event –reviews, Oobeya –management and Knowledge based product development are suggested as the initial steps of implementing lean product development paradigm in the manufacturing company. Proposals for refining the cur-rent product development process and increasing the stakeholder involvement in the development projects are made. Lean product development is finding its way to Finnish electrical machine industry, but the results will be available only after the methods have been implemented and adopted by the companies. There is some enthusiasm about the benefits of lean approach and if executed successfully it will provide competitive edge for the Finnish electrical machine industry.

Avoimet tuotealustat ja allianssit älytelevisiomarkkinoilla

Älytelevisiomarkkinat ovat nykyisellään pirstaloituneet eri valmistajien kehittäessä omia älytelevisioalustoitaan, mikä tekee sovelluskehittämisestä erittäin työlästä, kun kehitystyö pitää tehdä jokaiselle alustalle erikseen. LG:n ja Philipsin perustama Smart TV Alliance pyrkii yksinkertaistamaan sovelluskehittäjien työtä, samalla houkutellen lisää kehittäjiä alalle. Työssä tutustutaan tuotealustoihin, avoimeen ja suljettuun innovaatioon, sekä alliansseihin. Lisäksi perehdytään älytelevisioihin sekä tietenkin itse Smart TV Allianceen. Lisäksi tarkastellaan nykyistä markkina-asetelmaa ja arvioidaan yksittäisten toimijoiden tilannetta ja mahdollisia toimenpiteitä. Työn painopiste on fyysisen laitevalmistajan ja käyttöjärjestelmän kehittäjän/ylläpitäjän näkökulmasta. Työn kannalta tärkeässä roolissa ovat ohjelmistopohjaiset tuotealustat. Eritoten työssä käsitellään älytelevisioiden ohjelmistoa tuotealustana, mutta hyvä vaihtoehtoinen ja eritoten monille käytännönläheisempi esimerkki on tietokoneen käyttöjärjestelmä, kuten Microsoft Windows tai useat Linux-pohjaiset käyttöjärjestelmät. Keskeisenä ominaisuutena näissä kaikissa on, että itse käyttöjärjestelmä toimii yhteisenä pohjana, jonka päälle voidaan rakentaa muuta toiminnallisuutta, kuten pelejä ja toimistosovelluksia.

Optimization and Measuring Techniques for Collect-and-Place Machines in Printed Circuit Board Industry

This thesis considers optimization problems arising in printed circuit board assembly. Especially, the case in which the electronic components of a single circuit board are placed using a single placement machine is studied. Although there is a large number of different placement machines, the use of collect-and-place -type gantry machines is discussed because of their flexibility and increasing popularity in the industry. Instead of solving the entire control optimization problem of a collect-andplace machine with a single application, the problem is divided into multiple subproblems because of its hard combinatorial nature. This dividing technique is called hierarchical decomposition. All the subproblems of the one PCB - one machine -context are described, classified and reviewed. The derived subproblems are then either solved with exact methods or new heuristic algorithms are developed and applied. The exact methods include, for example, a greedy algorithm and a solution based on dynamic programming. Some of the proposed heuristics contain constructive parts while others utilize local search or are based on frequency calculations. For the heuristics, it is made sure with comprehensive experimental tests that they are applicable and feasible. A number of quality functions will be proposed for evaluation and applied to the subproblems. In the experimental tests, artificially generated data from Markov-models and data from real-world PCB production are used. The thesis consists of an introduction and of five publications where the developed and used solution methods are described in their full detail. For all the problems stated in this thesis, the methods proposed are efficient enough to be used in the PCB assembly production in practice and are readily applicable in the PCB manufacturing industry.