Law in the community: the University of Greenwich/Greenwich Association of Disabled People Centre for Independent Living (GAD) research project

The GAD Advocacy Service is funded by the London Borough of Greenwich Directorate of Neighbourhood Services; its remit to support disabled people experiencing Hate Crime, Domestic Violence and Harassment. Run by disabled personnel and giving advice to all disabled people it is unique in London. Since its inception in 2004, the Advocacy Service has been stretched to its limit - there is a need to extend the remit of the Advocacy Service to give specialist legal advice on other issues. In 2003, the CEDRM-UK project was set up in the University of Greenwich Law Department as part of the Disability Rights Promotion International Legal Education and Research Project; its objectives were firstly, to facilitate the collection of data on the effectiveness of legislation in promoting the rights of disabled persons; and secondly, to pilot new methods in teaching and training in Human Rights Law – students acquire an expertise in Human Rights Law through research into the practical application of legislation relating to civil and human rights in the daily life of the community. In July 2007, GAD and CEDRM-UK embarked on a joint project to report on the work of the Advocacy Service and to create a database to support its caseload. The 2008-9 Project team will report on their work and findings relating to facilitating equality in the workplace; the inclusion of cancer, HIV and multiple sclerosis within the legal definition of disability and the implications of the statutory duty to promote disability equality for the provision of extracurricular activities for schoolchildren. [From the Author]

The biocompatibility of resin-modified glass-ionomer cements for dentistry

OBJECTIVES: The biological effects of resin-modified glass-ionomer cements as used in clinical dentistry are described, and the literature reviewed on this topic. METHODS: Information on resin-modified glass-ionomers and on 2-hydroxyethyl methacrylate (HEMA), the most damaging substance released by these materials, has been collected from over 50 published papers. These were mainly identified through Scopus. RESULTS: HEMA is known to be released from these materials and has a variety of damaging biological properties, ranging from pulpal inflammation to allergic contact dermatitis. These are therefore potential hazards from resin-modified glass-ionomers. However, clinical results with these materials that have been reported to date are generally positive. CONCLUSIONS/SIGNIFICANCE: Resin-modified glass-ionomers cannot be considered biocompatible to nearly the same extent as conventional glass-ionomers. Care needs to be taken with regard to their use in dentistry and, in particular, dental personnel may be at risk from adverse effects such as contact dermatitis and other immunological responses.

A methodology for characterising new lead-free solder paste formulations used for flip-chip assembly applications

The paper reports on the investigation of the rheological behaviour new lead-free solder pastes formulations for use in flip-chip assembly applications. The study is made up of three parts; namely the evaluation of the effect of plate geometry, the effect of temperature and processing environment and the effect of torsional frequencies on the rheological measurements. Different plate geometries and rheological tests were used to evaluate new formulations in terms of wall slip characteristics, linear viscoelastic region and shear thinning behaviour. A technique which combines the use of the creep-recovery and dynamic frequency sweep tests was used to further characterise the paste structure, rheological behaviour and the processing performance of the new paste formulations. The technique demonstrated in this study has wide utility for R & D personnel involved in new paste formulation, for implementing quality control procedures used in paste manufacture and packaging and for qualifying new flip-chip assembly lines

Modelling of the time-dependent flow behaviour of lead-free solder pastes used for flip-chip assembly applications

The market for solder paste materials in the electronic manufacturing and assembly sector is very large and consists of material and equipment suppliers and end users. These materials are used to bond electronic components (such as flip-chip, CSP and BGA) to printed circuit boards (PCB's) across a range of dimensions where the solder interconnects can be in the order of 0.05mm to 5mm in size. The non-Newtonian flow properties exhibited by solder pastes during its manufacture and printing/deposition phases have been of practical concern to surface mount engineers and researchers for many years. The printing of paste materials through very small-sized stencil apertures is known to lead to increased stencil clogging and incomplete transfer of paste to the substrate pads. At these very narrow aperture sizes the paste rheology and particle-wall interactions become crucial for consistent paste withdrawal. These non-Newtonian effects must be understood so that the new paste formulations can be optimised for consistent printing. The focus of the study reported in this paper is the characterisation of the rheological properties of solder pastes and flux mediums, and the evaluation of the effect of these properties on the pastes' printing performance at the flip-chip assembly application level. Solder pastes are known to exhibit a thixotropic behaviour, which is recognised by the decrease in apparent viscosity of paste material with time when subjected to a constant shear rate. The proper characterisation of this time-dependent theological behaviour of solder pastes is crucial for establishing the relationships between the pastes' structure and flow behaviour; and for correlating the physical parameters with paste printing performance. In this paper, we present a number of methods which have been developed for characterising the time-dependent and non-Newtonian rheological behaviour of solder pastes and flux mediums as a function of shear rates. We also present results of the study of the rheology of the solder pastes and flux mediums using the structural kinetic modelling approach, which postulates that the network structure of solder pastes breaks down irreversibly under shear, leading to time and shear dependent changes in the flow properties. Our results show that for the solder pastes used in the study, the rate and extent of thixotropy was generally found to increase with increasing shear rate. The technique demonstrated in this study has wide utility for R&D personnel involved in new paste formulation, for implementing quality control procedures used in solder paste manufacture and packaging; and for qualifying new flip-chip assembly lines

Development of an in-situ, non-destructive ultrasonic monitoring technique for solder pastes

This paper concerns the use of a non-destructive ultrasonic technique for characterising the rheological properties of solder paste and specifically, the use of through-mode microsecond ultrasonic pulses for evaluation of viscoelastic properties of paste materials at the molecular level. Ultrasonic techniques are a widely used and a reliable form of non-destructive testing of materials. This is because techniques such as ultrasounds while used for testing or monitoring material properties, has offered immense benefits in applications where access to the sample is restricted or when handling the sample for testing could interfere with the monitoring or analysis process. Very often, this would mean that the measurements taken are not a true representation of the behaviour of the material (due to externally incorporated changes into the material's physical state during the removal or testing process). Ultrasonic based techniques are being increasingly used for quality control and production monitoring functions which requires evaluation of the changes in material properties over wide range of industrial applications such as cement paste quality, plastic/polymer extrusion process, dough, and even sugar content in beverage drinks. In addition, ultrasound techniques are of great interest for their capacity to take rapid measurements in systems which are optically opaque. The viscometer and rheometer are two of the most widely used rheological instruments used in industry for monitoring the quality of solder pastes, during the production and packaging stage. One of the potential limitations of viscometer and rheometer based measurements is that the collection and preparation of the solder paste samples can irreversibly alter the structure and flow behaviour of the sample. Hence the measurement may not represent the actual quality of the whole production batch. Secondly, rheological measurements and the interpretation of rheological data is a very technical and time consuming process, which requires professionally trained R&D personnel. It is for these reasons that materials suppliers (who formulate and produce solder pastes) and solder paste consumers (especially, contract electronics manufacturers) are keen to see the development of simple, easy to use and accurate techniques for the theological characterisation of solder pastes. The results from the work show that the technique can be used by R&D personnel involved in paste formulation and manufacture to monitor the batch-to-batch quality and consistency.

In-situ non-destructive ultrasonic rheology technique for monitoring different lead-free solder pastes for surface mount applications

This paper investigates the application of a non-destructive ultrasonic technique for characterising the rheological properties of solder paste through the use of through-mode microsecond ultrasonic pulses for evaluation of viscoelastic properties of lead-free solder paste containing different types of flux. Ultrasonic techniques offer a robust and reliable form of non-destructive testing of materials where access to the sample is restricted or when sample handling can interfere with the monitoring or analysis process due to externally incorporated changes to the material’s physical state or accidental contamination during the removal or testing process. Ultrasonic based techniques are increasingly used for quality control and production monitoring functions which requires evaluation of changes in material properties for a wide range of industrial applications such as cement paste quality, plastic/polymer extrusion process, dough and even sugar content in beverage drinks. In addition, ultrasound techniques are of great interest for their capability to take rapid measurements in systems which are optically opaque. The conventional industry approach for characterising the rheological properties of suspensions during processing/packaging stage is mainly through the use of viscometer and some through the use of rheometer. One of the potential limitations of viscometer and rheometer based measurements is that the collection and preparation of the solder paste samples can irreversibly alter the structure and flow behaviour of the sample. Hence the measurement may not represent the actual quality of the whole production batch. Secondly, rheological measurements and the interpretation of rheological data is a very technical and time consuming process, which requires professionally trained R&D personnel. The ultrasound technique being proposed provides simple, yet accurate and easy to use solution for the in-situ rheological characterisation of solder pastes which will benefit the materials suppliers (who formulate and produce solder pastes) and solder paste consumers (especially, contract electronics manufacturers). The results from the work show that the technique can be used by R&D personnel involved in paste formulation and manufacture to monitor the batch-to-batch quality and consistency.

Employee reward: alternatives, consequences and contexts

[Book Contents] Introducing Employee Reward Systems; Conceptual and Theoretical Frameworks; The Legal, Employment Relations and Market Context; Base Pay Structures and Relationships; Pay Setting, Composition and Progression; Variable Pay Schemes; Benefits; Pensions; Non-Financial Reward; Rewarding Directors and Executives; International Reward Management; Employee Reward within HRM.

¿Barreras invisibles? Actitudes de los estudiantes universitarios ante sus compañeros con discapacidad

El presente trabajo analiza los conocimientos, opiniones y actitudes de los estudiantes universitarios sobre sus compañeros con discapacidad. La integración educativa y social de estos estudiantes es objeto de preocupación y estudio en todo el sistema educativo español, incluida la enseñanza superior en la que 21.942 universitarios con discapacidad se encontraban matriculados en el curso 2013-2014. El estudio se realiza en el marco de dos Proyectos de Innovación Educativa[1] de la Universidad de Málaga en los que se examinaron las actitudes del personal docente e investigador, el alumnado en general y el alumnado con discapacidad de esta institución. En este artículo se recogen las perspectivas de los estudiantes sin discapacidad, necesarias para medir el grado de aceptación dentro de las aulas universitarias. Se empleó una encuesta suministrada mediante correo electrónico a la totalidad de la población de estudiantes de la Universidad de Málaga (N= 32.464). El tamaño de la muestra fue de 620 estudiantes, por lo que trabajamos con un margen de error del 3,9% para la estimación de los porcentajes con un nivel de confianza del 95%. Los datos, analizados mediante análisis estadístico, visibilizan la importancia de un elevado grado de información y conocimiento así como de una experiencia directa con la discapacidad. Ambas circunstancias se traducen en actitudes más positivas y favorables. Tan solo el 20% de los alumnos manifestó haber recibido en alguna ocasión cualquier tipo de información sobre este asunto por parte de la Universidad; no obstante, la mayoría valora positivamente la presencia de alumnos con discapacidad en la Universidad, la posibilidad de contar ellos como compañeros de clase y el enriquecimiento que supone esta convivencia dentro del aula. Se discuten posibles acciones para mejorar las actitudes hacia los estudiantes con discapacidad. Además, se plantea incluir una perspectiva que promueva el empoderamiento de estos estudiantes. [1] PIE 10-135 y PIE 13-103.

Monitoring treatment fidelity in a randomised controlled trial of a complex intervention.

Aim. This paper is a report of a study to describe how treatment fidelity is being enhanced and monitored, using a model from the National Institutes of Health Behavior Change Consortium. Background. The objective of treatment fidelity is to minimize errors in interpreting research trial outcomes, and to ascribe those outcomes directly to the intervention at hand. Treatment fidelity procedures are included in trials of complex interventions to account for inferences made from study outcomes. Monitoring treatment fidelity can help improve study design, maximize reliability of results, increase statistical power, determine whether theory-based interventions are responsible for observed changes, and inform the research dissemination process. Methods. Treatment fidelity recommendations from the Behavior Change Consortium were applied to the SPHERE study (Secondary Prevention of Heart DiseasE in GeneRal PracticE), a randomized controlled trial of a complex intervention. Procedures to enhance and monitor intervention implementation included standardizing training sessions, observing intervention consultations, structuring patient recall systems, and using written practice and patient care plans. The research nurse plays an important role in monitoring intervention implementation. Findings. Several methods of applying treatment fidelity procedures to monitoring interventions are possible. The procedure used may be determined by availability of appropriate personnel, fiscal constraints, or time limits. Complex interventions are not straightforward and necessitate a monitoring process at trial stage. Conclusion. The Behavior Change Consortium’s model of treatment fidelity is useful for structuring a system to monitor the implementation of a complex intervention, and helps to increase the reliability and validity of evaluation findings.

Obesity in People with Learning Disabilities: the impact of nurse led health screenings and health promotion activities

Background. Obesity appears to be more common among people with intellectual disabilities, with few studies focusing on achieving weight reduction. Aim. Firstly, to follow up people identified as overweight and obese following special health screening clinics and to determine the actions taken. Secondly, to evaluate the impact of health promotion classes on participants' weight loss. Methods. A clinic led by two learning disbaility nurses was held for all people aged 10 years and over (n=464) who attended special services within the area of one Health and Social Services Trust in Northern Ireland. In a second study, the nurses organised health promotion classes for 20 people over a 6 - 8 week period. Findings. The health screen identified 64% of adults and 26% of 10 - 19 year olds as being overweight or obese. Moreover, those aged 40 - 49 years who were obese had significantly higher levels of blood pressure. However, information obtained from a follow up questionnaire sent after 3 months suggested that of the 122 people identified for wiehgt reduciton, action had been taken for only 34% of them and only three were reported to have lost weight. The health promotion classes, however, led to a significant reduction in weight and body mass index scores. Conclusion. Health screening per se has limited impact on reducing obesity levels in this client group. Rather, health personnel such as general practitioners, nurses and health promotion staff need to work in partnership with service staff, carers and people with intellectual disabiltieis to create more active lifestyles.

Millimeter-Wave Soldier-to-Soldier Communications for Covert Battlefield Operations

Mobile ad hoc networking of dismounted combat personnel is expected to play an important role in the future of network-centric operations. High-speed, short-range, soldier-to-soldier wireless communications will be required to relay information on situational awareness, tactical instructions, and covert surveillance related data during special operations reconnaissance and other missions. This article presents some of the work commissioned by the U. K. Ministry of Defence to assess the feasibility of using 60 GHz millimeter-wave smart antenna technology to provide covert communications capable of meeting these stringent networking needs. Recent advances in RF front-end technology, alongside physical layer transmission schemes that could be employed in millimeter-wave soldier-mounted radio, are discussed. The introduction of covert communications between soldiers will require the development of a bespoke directive medium access layer. A number of adjustments to the IEEE 802.11 distribution coordination function that will enable directional communications are suggested. The successful implementation of future smart antenna technologies and direction of arrival-based protocols will be highly dependent on thorough knowledge of transmission channel characteristics prior to deployment. A novel approach to simulating dynamic soldier-to-soldier signal propagation using state-of-the-art animation-based technology developed for computer game design is described, and important channel metrics such as root mean square angle and delay spread for a team of four networked infantry soldiers over a range of indoor and outdoor environments is reported.

Channel characterization for single- and multiple-antenna wearable systems used for indoor body-to-body communications

In this paper, an analysis of radio channel characteristics for single- and multiple-antenna bodyworn systems for use in body-to-body communications is presented. The work was based on an extensive measurement campaign conducted at 2.45 GHz representative of an indoor sweep and search scenario for fire and rescue personnel. Using maximum-likelihood estimation in conjunction with the Akaike information criterion (AIC), five candidate probability distributions were investigated and from these the kappa - mu distribution was found to best describe small-scale fading observed in the body-to-body channels. Additional channel parameters such as autocorrelation and the cross-correlation coefficient between fading signal envelopes were also analyzed. Low cross correlation and small differences in mean signal levels between potential dual-branch diversity receivers suggested that the prospect of successfully implementing diversity in this type application is extremely good. Moreover, using selection combination, maximal ratio, and equal gain combining, up to 8.69-dB diversity gain can be made available when four spatially separated antennas are used at the receiver. Additional improvements in the combined envelopes through lower level crossing rates and fade durations at low signal levels were also observed.

Vitamins C and E for prevention of pre-eclampsia in women with type 1 diabetes (DAPIT): a randomised placebo-controlled trial.

Background
Results of several trials of antioxidant use during pregnancy have not shown a reduction in pre-eclampsia, but the eff ect in women with diabetes is unknown. We aimed to assess whether supplementation with vitamins C and E reduced incidence of pre-eclampsia in women with type 1 diabetes.

Methods
We enrolled women from 25 UK antenatal metabolic clinics in a multicentre randomised placebo-controlled trial. Eligibility criteria were type 1 diabetes preceding pregnancy, presentation between 8 weeks’ and 22 weeks’ gestation, singleton pregnancy, and age 16 years or older. Women were randomly allocated in a 1:1 ratio to receive1000 mg vitamin C and 400 IU vitamin E (a-tocopherol) or matched placebo daily until delivery. The randomisation sequence was stratifi ed by centre with balanced blocks of eight patients. All trial personnel and participants were masked to treatment allocation. The primary endpoint was pre-eclampsia, which we defi ned as gestational hypertension with proteinuria. Analysis was by modifi ed intention to treat. This study is registered, ISRCTN27214045.

Findings
Between April, 2003, and June, 2008, 762 women were randomly allocated to treatment groups (379 vitamin supplementation, 383 placebo). The primary endpoint was assessed for 375 women allocated to receive vitamins, and 374 allocated to placebo. Rates of pre-eclampsia did not differ between vitamin (15%, n=57) and placebo (19%, 70)groups (risk ratio 0·81, 95% CI 0·59–1·12). No adverse maternal or neonatal outcomes were reported.

Interpretation
Supplementation with vitamins C and E did not reduce risk of pre-eclampsia in women with type 1 diabetes. However, the possibility that vitamin supplementation might be benefi cial in women with a low antioxidant status at baseline needs further testing.