Cooperative Lakes Area Monitoring Project-Project Overview, 2007

Water fact sheet for Iowa Department of Natural Resources and the Geological Bureau.

Cooperative Lakes Area Monitoring Project-Silver Lake, 2007

Water fact sheet for Iowa Department of Natural Resources and the Geological Bureau.

Cooperative Lakes Area Monitoring Project-Center Lake, 2007

Water fact sheet for Iowa Department of Natural Resources and the Geological Bureau.

Cooperative Lakes Area Monitoring Project-West Okoboji Lake, 2007

Water fact sheet for Iowa Department of Natural Resources and the Geological Bureau.

Cooperative Lakes Area Monitoring Project-Lower Gar Lake, 2007

Water fact sheet for Iowa Department of Natural Resources and the Geological Bureau.

Cooperative Lakes Area Monitoring Project-Lake Minnewashta, 2007

Water fact sheet for Iowa Department of Natural Resources and the Geological Bureau.

Cooperative Lakes Area Monitoring Project-Upper Gar Lake, 2007

Water fact sheet for Iowa Department of Natural Resources and the Geological Bureau.

Cooperative Lakes Area Monitoring Project-East Okoboji Lake, 2007

Water fact sheet for Iowa Department of Natural Resources and the Geological Bureau.

Cooperative Lakes Area Monitoring Project-Big Spirit Lake, 2007

Water fact sheet for Iowa Department of Natural Resources and the Geological Bureau.

The oceanic base of slope record of the Permian-Triassic crisis: view from Tethys (Oman)

The Oman Mountains provide some of the best sections of Permian and Triassic sediments from ocean sea floor to base-of-slope environments related to the distal South Tethyan margin. The central part of the range exposes the Buday'ah section of oceanic sediments in the so-called "Hawasina allochtons". The locality of Wadi Maqam in the north-western part of the Oman Mountains is among places where the thick Permian-Triassic base-of-slope sediments is exposed (Baud et al., 2001). Overlying 400 m of middle Permian limestones and dolomites, the upper Permian sediments consist of 50 m of ≈ 10 cm thick beds of cherts and dolomites rich in sponge spicules. The top of the Permian units is well bioturbated lime mudstone-wackestone, devoid of cherts and dated as late Changhsingian (Krystyn in Richoz et al., 2005). The boundary yellow shales are overlain by very thinly bedded, laminated microbial platy lime mudstone with H. parvus. The dramatic loss of the burrowing infauna indicates the appearance of oxygen-poor water. These Induan sediments are about 25 m thick and show at the top the first calcirudites, commonly clast-supported (edge-wise conglomerates), and are characterized by tabular clasts representing the sub- in situ reworking of the laminated, platy calcilutite. The very thick Smithian overlying litho-unit (up to 900 m) marks the onset on the base-of-slope of a deep-marine basin in which carbonate submarine fan deposits developed This very thick unit consists essentially of platy limestones, calcarenites and calcirudites. It comprises mainly grey-beige calcilutite, laminated and flaggy, interbedded with sparse beds of fine-grained calcarenite in cm beds. Channelized beds of intraformational calcirudite are also part of this succession which constitutes the greater part of the outcrop available. During the Spathian to Anisian, the sedimentation changes to terrigenous mudstone and siltstone that ended with Ladinian radiolarites.

Nucleation and growth of metamorphic minerals in contact aureoles

THESIS ABSTRACT Nucleation and growth of metamorphic minerals are the consequence of changing P-T-X-conditions. The thesis presented here focuses on processes governing nucleation and growth of minerals in contact metamorphic environments using a combination of geochemical analytics (chemical-, isotope-, and trace element composition), statistical treatments of spatial data, and numerical models. It is shown, that a combination of textural modeling and stable isotope analysis allows a distinction between several possible reaction paths for olivine growth in a siliceous dolomite contact aureole. It is suggested that olivine forms directly from dolomite and quartz. The formation of olivine from this metastable reaction implies metamorphic crystallization far from equilibrium. As a major consequence, the spatial distribution of metamorphic mineral assemblages in a contact aureole cannot be interpreted as a proxy for the temporal evolution of a single rock specimen, because each rock undergoes a different reaction path, depending on temperature, heating rate, and fluid-infiltration rate. A detailed calcite-dolomite thermometry study was initiated on multiple scales ranging from aureole scale to the size of individual crystals. Quantitative forward models were developed to evaluate the effect of growth zoning, volume diffusion and the formation of submicroscopic exsolution lamellae (<1 µm) on the measured Mg-distribution in individual calcite crystals and compare the modeling results to field data. This study concludes that Mg-distributions in calcite grains of the Ubehebe Peak contact aureole are the consequence of rapid crystal growth in combination with diffusion and exsolution. The crystallization history of a rock is recorded in the chemical composition, the size and the distribution of its minerals. Near the Cima Uzza summit, located in the southern Adamello massif (Italy), contact metamorphic brucite bearing dolomite marbles are exposed as xenoliths surrounded by mafic intrusive rocks. Brucite is formed retrograde pseudomorphing spherical periclase crystals. Crystal size distributions (CSD's) of brucite pseudomorphs are presented for two profiles and combined with geochemistry data and petrological information. Textural analyses are combined with geochemistry data in a qualitative model that describes the formation periclase. As a major outcome, this expands the potential use of CSD's to systems of mineral formation driven by fluid-infiltration. RESUME DE LA THESE La nucléation et la croissance des minéraux métamorphiques sont la conséquence de changements des conditions de pression, température et composition chimique du système (PT-X). Cette thèse s'intéresse aux processus gouvernant la nucléation et la croissance des minéraux au cours d'un épisode de métamorphisme de contact, en utilisant la géochimie analytique (composition chimique, isotopique et en éléments traces), le traitement statistique des données spatiales et la modélisation numérique. Il est montré que la combinaison d'un modèle textural avec des analyses en isotopes stables permet de distinguer plusieurs chemins de réactions possibles conduisant à la croissance de l'olivine dans une auréole de contact riche en Silice et dolomite. Il est suggéré que l'olivine se forme directement à partir de la dolomie et du quartz. Cette réaction métastable de formation de l'olivine implique une cristallisation métamorphique loin de l'équilibre. La principale conséquence est que la distribution spatiale des assemblages de minéraux métamorphiques dans une auréole de contact ne peut pas être considérée comme un témoin de l'évolution temporelle d'un type de roche donné, puisque chaque type de roche suit différents chemins de réactions, en fonction de la température, la vitesse de réchauffement et le taux d'infiltration du fluide. Une étude thermométrique calcite-dolomite détaillée a été réalisée à diverses échelles, depuis l'échelle de l'auréole de contact jusqu'à l'échelle du cristal. Des modèles numériques quantitatifs ont été développés pour évaluer l'effet des zonations de croissance, de la diffusion volumique et de la formation de lamelles d'exsolution submicroscopiques (<1µm) sur la distribution du magnésium mesuré dans des cristaux de calcite individuels. Les résultats de ce modèle ont été comparés ä des échantillons naturels. Cette étude montre que la distribution du Mg dans les grains de calcite de l'auréole de contact de l'Ubehebe Peak (USA) résulte d'une croissance cristalline rapide, associée aux processus de diffusion et d'exsolution. L'histoire de cristallisation d'une roche est enregistrée dans la composition chimique, la taille et la distribution de ses minéraux. Près du sommet Cima Uzza situé au sud du massif d'Adamello (Italie), des marbres dolomitiques à brucite du métamorphisme de contact forment des xénolithes dans une intrusion mafique. La brucite constitue des pseudomorphes rétrogrades du périclase. Les distributions de taille des cristaux (CSD) des pseudomorphes de brucite sont présentées pour deux profiles et sont combinées aux données géochimiques et pétrologiques. Les analyses textorales sont combinées aux données géochimiques dans un modèle qualitatif qui décrit la formation du périclase. Ceci élargit l'utilisation potentielle de la C5D aux systèmes de formation de minéraux controlés par les infiltrations fluides. THESIS ABSTRACT (GENERAL PUBLIC) Rock textures are essentially the result of a complex interaction of nucleation, growth and deformation as a function of changing physical conditions such as pressure and temperature. Igneous and metamorphic textures are especially attractive to study the different mechanisms of texture formation since most of the parameters like pressure-temperature-paths are quite well known for a variety of geological settings. The fact that textures are supposed to record the crystallization history of a rock traditionally allowed them to be used for geothermobarometry or dating. During the last decades the focus of metamorphic petrology changed from a static point of view, i.e. the representation of a texture as one single point in the petrogenetic grid towards a more dynamic view, where multiple metamorphic processes govern the texture formation, including non-equilibrium processes. This thesis tries to advance our understanding on the processes governing nucleation and growth of minerals in contact metamorphic environments and their dynamic interplay by using a combination of geochemical analyses (chemical-, isotope-, and trace element composition), statistical treatments of spatial data and numerical models. In a first part the thesis describes the formation of metamorphic olivine porphyroblast in the Ubehebe Peak contact aureole (USA). It is shown that not the commonly assumed succession of equilibrium reactions along a T-t-path formed the textures present in the rocks today, but rather the presence of a meta-stable reaction is responsible for forming the olivine porphyroblast. Consequently, the spatial distribution of metamorphic minerals within a contact aureole can no longer be regarded as a proxy for the temporal evolution of a single rock sample. Metamorphic peak temperatures for samples of the Ubehebe Peak contact aureole were determined using calcite-dolomite. This geothermometer is based on the temperature-dependent exchange of Mg between calcite and dolomite. The purpose of the second part of this thesis was to explain the interfering systematic scatter of measured Mg-content on different scales and thus to clarify the interpretation of metamorphic temperatures recorded in carbonates. Numerical quantitative forward models are used to evaluate the effect of several processes on the distribution of magnesium in individual calcite crystals and the modeling results were then compared to measured field. Information about the crystallization history is not only recorded in the chemical composition of grains, like isotope composition or mineral zoning. Crystal size distributions (CSD's) provide essential information about the complex interaction of nucleation and growth of minerals. CSD's of brucite pseudomorphs formed retrograde after periclase of the southern Adamello massif (Italy) are presented. A combination of the textural 3D-information with geochemistry data is then used to evaluate reaction kinetics and to constrain the actual reaction mechanism for the formation of periclase. The reaction is shown to be the consequence of the infiltration of a limited amount of a fluid phase at high temperatures. The composition of this fluid phase is in large disequilibrium with the rest of the rock resulting in very fast reaction rates. RESUME DE LA THESE POUR LE GRAND PUBLIC: La texture d'une roche résulte de l'interaction complexe entre les processus de nucléation, croissance et déformation, en fonction des variations de conditions physiques telles que la pression et la température. Les textures ignées et métamorphiques présentent un intérêt particulier pour l'étude des différents mécanismes à l'origine de ces textures, puisque la plupart des paramètres comme les chemin pression-température sont relativement bien contraints dans la plupart des environnements géologiques. Le fait que les textures soient supposées enregistrer l'histoire de cristallisation des roches permet leur utilisation pour la datation et la géothermobarométrie. Durant les dernières décennies, la recherche en pétrologie métamorphique a évolué depuis une visualisation statique, c'est-à-dire qu'une texture donnée correspondait à un point unique de la grille pétrogénétique, jusqu'à une visualisation plus dynamique, où les multiples processus métamorphiques qui gouvernent 1a formation d'une texture incluent des processus hors équilibre. Cette thèse a pour but d'améliorer les connaissances actuelles sur les processus gouvernant la nucléation et la croissance des minéraux lors d'épisodes de métamorphisme de contact et l'interaction dynamique existant entre nucléation et croissance. Pour cela, les analyses géochimiques (compositions chimiques en éléments majeurs et traces et composition isotopique), le traitement statistique des données spatiales et la modélisation numérique ont été combinés. Dans la première partie, cette thèse décrit la formation de porphyroblastes d'olivine métamorphique dans l'auréole de contact de l'Ubehebe Peak (USA). Il est montré que la succession généralement admise des réactions d'équilibre le long d'un chemin T-t ne peut pas expliquer les textures présentes dans les roches aujourd'hui. Cette thèse montre qu'il s'agirait plutôt d'une réaction métastable qui soit responsable de la formation des porphyroblastes d'olivine. En conséquence, la distribution spatiale des minéraux métamorphiques dans l'auréole de contact ne peut plus être interprétée comme le témoin de l'évolution temporelle d'un échantillon unique de roche. Les pics de température des échantillons de l'auréole de contact de l'Ubehebe Peak ont été déterminés grâce au géothermomètre calcite-dolomite. Celui-ci est basé sur l'échange du magnésium entre la calcite et la dolomite, qui est fonction de la température. Le but de la deuxième partie de cette thèse est d'expliquer la dispersion systématique de la composition en magnésium à différentes échelles, et ainsi d'améliorer l'interprétation des températures du métamorphisme enregistrées dans les carbonates. Des modèles numériques quantitatifs ont permis d'évaluer le rôle de différents processus sur la distribution du magnésium dans des cristaux de calcite individuels. Les résultats des modèles ont été comparés aux échantillons naturels. La composition chimique des grains, comme la composition isotopique ou la zonation minérale, n'est pas le seul témoin de l'histoire de la cristallisation. La distribution de la taille des cristaux (CSD) fournit des informations essentielles sur les interactions entre nucléation et croissance des minéraux. La CSD des pseudomorphes de brucite retrograde formés après le périclase dans le sud du massif Adamello (Italie) est présentée dans la troisième partie. La combinaison entre les données textorales en trois dimensions et les données géochimiques a permis d'évaluer les cinétiques de réaction et de contraindre les mécanismes conduisant à la formation du périclase. Cette réaction est présentée comme étant la conséquence de l'infiltration d'une quantité limitée d'une phase fluide à haute température. La composition de cette phase fluide est en grand déséquilibre avec le reste de la roche, ce qui permet des cinétiques de réactions très rapides.

Assessment of human skin penetration of two irritant herbicides

Two common herbicides; isoproturon and bentazon, are strong skin irritants and cross the skin barrier easily. Assessment of percutaneous absorption of these substances is a very important step in the evaluation of any dermal or transdermal dose, especially among agricultural workers who frequently have dermal exposures during crop treatment. The aims of the study were to determine the permeation rate of human skin for both herbicides in vitro, and histologically evaluate skin damage due to irritation at different concentrations. Skin penetration was assessed using a dynamic flow-through in vitro penetration system and analysis were performed with ion trap LC-MS (acidified water: acetronitile, C18 column). Two concentrations of bentazon (75 and 150 μg/mL) and isoproturon (125 and 250 μg/mL) in saline solution were applied on excised human skin from several donors. Saline water was used as receptor fluid. Collection times were: 4, 8, and 24 hours. After the experiments, the skin was removed and examined by histopathology for apoptosis, acanthosis, acantholysis and epidermolysis. The skin permeation rate, J, was calculated from the slope of the cumulative amount permeated as a function of time. The lag time, tL, was assigned from the time-axis intercept of the extrapolation of this linearity. Our results showed that tL for bentazon and isoproturon for both concentrations tested were similar; 2, 1.5 hours, respectively. Bentazon had a lowerer J compared to isoproturon; 350, 600 ng/cm2/h, respectively. Some acanthosis was observed after 8 hours of exposure to either of the two substances. In conclusion, our in vitro experiments demonstrate that bentazon and isoproturon cross the skin barrier within 2 hours even at very low concentrations, and showed some signs of skin damage. Future tests involve concentrations found in commercial products.

Interdisciplinary research for the analysis and risk assesment : the case of the municipality of Uspantan Guatemala

Short description of the proposed presentation * lees than 100 words This paper describes the interdisciplinary work done in Uspantán, Guatemala, a city vulnerable to natural hazards. We investigated local responses to landslides that happened in 2007 and 2010 and had a strong impact on the local community. We show a complete example of a systemic approach that incorporates physical, social and environmental aspects in order to understand risks. The objective of this work is to present the combination of social and geological data (mapping), and describe the methodology used for identification and assessment of risk. The article discusses both the limitations and methodological challenges encountered when conducting interdisciplinary research. Describe why it is important to present this topic at the Global Platform in less than 50 words This work shows the benefits of addressing risk in an interdisciplinary perspective, in particular how integrating social sciences can help identify new phenomena and natural hazards and assess risk. It gives a practical example of how one can integrate data from different fields. What is innovative about this presentation? * The use of mapping to combine qualitative and quantitative data. By coupling approaches, we could associate a hazard map with qualitative data gathered by interviews with the population. This map is an important document for the authorities. Indeed, it allows them to be aware of the most dangerous zones, the affected families and the places where it is most urgent to intervene.

Concepção de uma Estratégia de Geoconservação para Cabo Verde e sua Aplicação à Ilha de Santiago

A singularidade de certos registos geológicos impressos em rochas, as peculiaridades estruturais e dinâmicas dos diversos elementos dos geossistemas, a análise dos seus valores intrínsecos, bem como da sua vulnerabilidade e dos perigos de degradação que os podem afectar, entre outros parâmetros, são factores que concorrem para a necessidade de assegurar a conservação do património geológico. É neste contexto que surge a geoconservação que preconiza a gestão do património geológico com base num conjunto de medidas e acções para a identificação, manutenção ou recuperação do valor natural dos elementos da geodiversidade numa perspectiva de sustentabilidade dos recursos geológicos que integram a componente abiótica do sistema natural. A geoconservação, à escala internacional, tem um desenvolvimento irregular. Enquanto algumas regiões estão bastante avançadas, como na Europa, outras revelam ainda alguma inércia relativamente à implementação de iniciativas que se devem enquadrar no âmbito da conservação da Natureza e do ordenamento do território. Em África, são ainda pontuais os exemplos de geoconservação pelo que, este trabalho, pretende ser promotor de uma política de geoconservação neste continente. No presente trabalho, concebemos uma estratégia de geoconservação para Cabo Verde e aplicamo-la, a título de exemplo, à ilha de Santiago. A metodologia utilizada, baseada em critérios internacionalmente reconhecidos e aceites para o inventário do património geológico de valor científico, consiste no estabelecimento de “categorias temáticas” que representam as características e evolução geológica do arquipélago. Foram propostas nove categorias para Cabo Verde e, para cada uma delas, foram inventariados diversos locais de interesse, dos quais 40 foram propostos como geossítios na ilha de Santiago. Com base nestes geossítios, propuseram-se linhas metodológicas para as etapas subsequentes que integram uma estratégia de geoconservação, nomeadamente, a quantificação, classificação, conservação, valorização, divulgação e monitorização de geossítios. Embora a conservação da geodiversidade esteja prevista, embora de forma pouco clara, na actual legislação ambiental cabo-verdiana, a execução desta estratégia de geoconservação poderá representar um dos primeiros passos para a definição, caracterização e valorização, sistemáticas, do património geológico nacional e contribuir para a implementação de uma política de sustentabilidade ambiental para o país.

Inundações urbanas: desafios ao ordenamento do território. O caso da Cidade da Praia (Cabo Verde)

Pela sua posição geográfica e particulares condições climáticas, devidas à sua inserção na faixa saheliana com caraterísticas de marcada aridez, Cabo Verde é um arquipélago com condições naturais adversas, pautado principalmente pela seca prolongada. Muitas vezes esta conjuntura é interpolada por curtos períodos de fortes chuvadas que podem originar cheias e inundações nos principais centros urbanos. Os eventos ocorridos revelam consequências graves, desde prejuízos na agricultura, perda de animais, destruição de infra-estruturas, perda de bens materiais e, mesmo, vítimas humanas mortais. Este estudo tem como objetivos principais: (i) perceber os problemas e desafios que se colocam à cidade da Praia (maior centro urbano do país, com forte crescimento e expansão urbana) perante situações de inundação; (ii) contribuir para o maior conhecimento das causas e consequências dessas inundações; (iii) definir quais as áreas de maior suscetibilidade às cheias e quais as que possuem um maior risco potencial. Optou-se por uma metodologia integrada, através do levantamento bibliográfico, cartográfico, numérico e percetivo (com base em entrevistas e inquéritos). Para o estudo das bacias hidrográficas foram calculados índices morfométricos, definidas classes de permeabilidade do substrato geológico e aplicado o método multicritério de Reis (2011) para a definição das áreas suscetíveis às cheias. Analisaram-se as precipitações máximas diárias anuais e respetivos períodos de retorno, com a aplicação do método de Gumbel. A análise de notícias de jornais, referentes ao período compreendido entre 1980 e 2011, foi fundamental para o conhecimento da distribuição espácio-temporal dos eventos perigosos de inundação em Cabo Verde e na cidade da Praia. Os resultados obtidos revelam um significativo grau de suscetibilidade às cheias na cidade da Praia. As áreas de maior risco potencial às inundações encontram-se no setor central da cidade, resultante da conjugação da convergência do escoamento das três ribeiras principais, da elevada densidade populacional e de construção desordenada nos leitos de cheia e nas áreas deprimidas, onde se acumulam as águas.