Vicilinas de sementes de leguminosas selvagens:purificação, caracterização, efeito de deletério e mecanismo de ação para bruquídeos e para fungos fitopatogênicos

Globulins fractions of legume seeds of Crotalaria pallida, Erytrina veluntina and Enterolobium contortisiliquum were isolated and submitted to assays against serine, cysteine and aspartic proteinases, as also amylase present in midgut of C. maculatus and Z. subfasciatus. Hemagglutination assays indicated presence of a lectin in E. veluntina globulin fractions. This lectin had affinity to human erythrocytes type A, B and O. Vicilins were purified by chromatography on Sephacryl S-300 followed of a chromatography on Sephacryl S-200, which was calibrated using protein markers. Vicilins from C. pallida (CpV) and E. veluntina (EvV) seeds had a molecular mass of 124.6 kDa and E. contortisiliquum a molecular mass of 151kDa. Eletrophoresis in presence of SDS showed that CpV was constituted by four subunities with apparent molecular mass of 66, 63, 57 and 45 kDa, EvV with three subunities with apparent molecular mass of 45kDa and EcV four subunities, two with 37.1 kDa and two with 25.8 kDa. Non denaturantig eletrophoresis displayed single bands with high homogeneity, where CpV had lower acidic behavior. All vicilins are glycoproteins with carbohydrate contents at 1 to1.5%. Bioassays were done to detect deleterious effects of vicilins against C. maculatus and Z. subfasciatus larvae. CpV, EvV and EcV exhibited a WD50 of 0.28, 0.19 and 1.03%; LD50 0.2, 0.26, and 1.11% respectively to C. maculatus. The dose responses of CpV, EvV and EcV to Z. subfasciatus were: WD50 of 0.12, 0.14, 0.65% and LD50 of 0.09, 0.1, and 0.43% respectively. The mechanism of action of these proteins to bruchids should be based on their properties of bind to chitin present in mid gut of larvae associated with the low digestibility of vicilin. In assays against phytopatogenous fungus, only EcV was capable of inhibit F. solani growth at concentrations of 10 and 20 µg and its action mechanism should be also based in the affinity of EcV to chitin present in the fungi wall

Gestão florestal e propriedade: A floresta, a (sua) propriedade e o alcance das políticas públicas

O trabalho pretende questionar se as necessidades da gestão da floresta e as interacções com o ambiente, justificam o repensar do conceito de propriedade privada, na definição de políticas florestais concretizadoras duma «mundividência ambiental». Estrutura-se em quatro partes: primeiro, procura-se dar uma perspectiva do direito de propriedade privada, a sua perenidade na nossa cultura, sobretudo na cultura jurídica; segundo, analisa-se a dinâmica da propriedade privada da floresta nos últimos séculos, e as soluções de políticas florestais- destacando-se a criação das zonas de intervenção florestal (ZIF); terceiro, estuda-se em concreto o regime de certificação florestal, como forma específica de gestão florestal; quarto, sublinham-se novos desafios ambientais à gestão das florestas, designadamente a identificação dos problemas que emergem em resultado das alterações climáticas, destacando-se o sequestro de carbono e a criação do mercado de carbono. Este estudo não é estanque, faz parte de um mesmo questionamento: é o ambiente um valor para a humanidade ou é um valor em si mesmo? ABSTRACT: The work intends to question if the private property of the forest, toward the necessities of management and interactions with the environment, justifies the rethink of the concept, in forest politics definition, producer of an interactive view of the environment. lt is structured in four parts: first, it intends to give a perspective of the right of private property, its longevity in our culture, the importance of legal quarrel; second, the dynamics of the private property of the forest, in the latest centuries, and the solutions of the implemented forest politics - being distinguished the creation of zones of forest intervention, the ZIF; third, the forest management ­ forest certification; fourth, the environmental source, the identification of problems that emerge in result of climatic alterations, being distinguished the kidnap of carbon and the creation of the carbon market. This study is not tight; it is part of the same reflection: of being the environment a value for the humanity or a value in itself exactly.

Efeitos da dieta hipoprotéica na formação e composição de estruturas dentárias: estudo experimental em ratos Wistar

Protein and caloric malnutrition has been considered one of the most concerned endemic diseases in Brazil and in the world. It has been known that depletion or reduction of proteins as far as meals are concerned can steer irreversible damages upon several organic systems. This study had as aim evaluate the effects the low-protein diet had over the formation and composition of the teeth components. 18 females and 6 males were used for the experiment. 12 from the 18 females had undertaken the low-protein diet (DH) for 03 weeks and the other 6, which remained, and those males had undertaken a controlled diet (DC) for the same period. All animals had the diets during their mating, pregnancy and lactation cycle. As soon as the offsprings had been born, 10 young males and females of each group faced a disease hood analysis to check the teeth germs of their lower fore teeth. The rest of the group had their lactation cycle normally 60 days. Then they were put to death and had their lower fore teeth removed both to be analyzed through a scanning electronic microscopy (SEM) of the structure alterations and to have their calcium checked by an atomic absorption of the phosphorus vanadate-molibdate method and by other minerals EDX method. The animals livers were removed to have their hepatic proteins analyzed as well. The histopatologic study showed that at first day of birth, all animals had their lower fore teeth come out. It was verified that 90% of the animals teeth were in an apposition and calcification period and it was possible to observe the dentin formation from 60% of the 90% already mentioned. Through the SEM method it could be realized that 90% of the animals of the DH group had their lower fore teeth easily broken and no definite shape. In this same group itself, it was also observed long micro fissures 369,66 nm ± 3,45 while the DC group had fissures of 174 nm ± 5,72. Now regarding the calcium and phosphorus concentration, it could be noticed that there was a great reduction of these components and other minerals in the DH group. Almost all minerals, except for the Cl and K, presented higher levels in the DC group enamel.The reduction of the protein input greatly influenced the offsprings´ weight and height. However the hepatic proteins had no important difference between the groups what can make one believe that those animals suffered from protein malnutrition of marasmic kind

Estruturas cerâmicas a base de zircônia e alumina utilizadas na confecção de infra - estruturas para coroas e pontes fixas

The continuous advances in ceramic systems for crowns and bridges infrastructure getting researchers and manufacturers looking for a material that has good mechanical properties and aesthetic. The purpose of this study was to verify in which composition and sintering temperature the ceramic system for infrastructure composed of alumina and zirconia would have the best mechanical properties. With this objective we made in UFRN laboratories 45 test bodies in the form of rectangular bars with the following dimensions: 30mm x 8mm x 3mm, where we separated by the sintering temperature: 1200°C, 1300ºC and 1400ºC, and by comp osition: 33% Zirconia + 67% Alumina; 50% Zirconia + 50% Alumina and 25% Zirconia + 75% Alumina, these test bodies were not infiltrated with glass. Also, were made nine test bodies by a technical from a laboratory with a commercial ceramic system: in the Ceram Zircônia (Vita - Zahnfabrik) with the following dimensions: 20mm x 10mm x 0.5mm, these test bodies following all recommendations of the manufacturer and were infiltrated with glass. Were realized optical and electronic microscopy analyses, hardness testing, resistance to bending in three points, porosity and bulk density. After analysis of the results we verified that with the increasing of sintering temperature, increased the value of resistance to bending, but with the same temperature there was no significant difference between the different compositions, samples made with the commercial ceramic that were infiltrated, presented a resistance to bending six times greater than the samples sintered to 1400°C and which have not been infiltra ted. There was no significant difference between the values of apparent porosity for the samples made in UFRN laboratories, but the samples of commercial ceramic obtained 0% in porosity apparent value. In tests of Rockwell Hardness there is an increase in the value of Hardness, with the increase of sintering temperature for the samples not infiltrated. Samples infiltrated showed similar values as the samples sintered in 1400°C. There was no significant difference between the values of apparent density among samples manufactured in UFRN laboratories and samples made with a commercial ceramic

Relação de alcance em dígrafos transitivos e a propriedade Z

Dissertação (mestrado)—Universidade de Brasília, Instituto de Ciências Exatas, Departamento de Matemática, 2016.

Módulos ambientais de apoio à gestão da propriedade na produção integrada.

A fruticultura é uma atividade promissora para o desenvolvimento do agronegócio brasileiro, que apresenta um ambiente favorável ao seu crescimento com o aumento do consumo de frutas in natura por parte da população brasileira, possibilidade de avanços nas exportações, capacidade de geração de emprego e renda para a agricultura familiar, valorização de produtores e trabalhadores rurais devido à capacitação e adoção de tecnologias adequadas, e ainda, complementação e segurança alimentar. Entretanto, para a atividade se desenvolver é preciso profissionalizar o setor, ou seja, criar mecanismos de produção de frutas de qualidade para o mercado interno e externo. Diante desta necessidade e das exigências do mercado internacional, o Sistema Agropecuário de Produção Integrada (SAPI) do Ministério da Agricultura, Pecuária e Abastecimento ? MAPA (ANDRIGUETO et al., 2006), tem recebido maior atenção dos governantes, produtores e membros de instituições de pesquisa e desenvolvimento (P&D). A Produção Integrada (PI) é um sistema de produção que preconiza a adoção de tecnologias menos agressivas ao meio ambiente e à saúde humana, visando à qualidade e segurança do alimento, qualidade ambiental, rentabilidade econômica e equidade social (ANDRIGUETO et al., 2006). Este sistema adota práticas sustentáveis, baseadas no uso racional de recursos naturais e na substituição de insumos poluentes, e utiliza ferramentas de monitoramento dos procedimentos e de rastreabilidade. No Brasil, a implantação do sistema de PI teve início no final da década de 90. Neste processo de implantação, são requeridas atividades de capacitação de recursos humanos. Os primeiros projetos de PI priorizaram a disseminação de tecnologias adequadas ao sistema e diretamente relacionadas à condução dos cultivos. No momento atual, com a consolidação da implantação do sistema para várias culturas, os temas ambientais, particularmente os relacionados aos recursos naturais, que compõem a Área Temática 3, do Marco Legal da Produção Integrada de Frutas (ANDRIGUETO & KOSOSKI, 2002) e de todas as Normas Técnicas Específicas oriundas dele, merecem maior atenção.

Análise gráfica de estruturas porosas sobre a ótica da estereologia

In this work we developed a computer simulation program for physics porous structures based on programming language C + + using a Geforce 9600 GT with the PhysX chip, originally developed for video games. With this tool, the ability of physical interaction between simulated objects is enlarged, allowing to simulate a porous structure, for example, reservoir rocks and structures with high density. The initial procedure for developing the simulation is the construction of porous cubic structure consisting of spheres with a single size and with varying sizes. In addition, structures can also be simulated with various volume fractions. The results presented are divided into two parts: first, the ball shall be deemed as solid grains, ie the matrix phase represents the porosity, the second, the spheres are considered as pores. In this case the matrix phase represents the solid phase. The simulations in both cases are the same, but the simulated structures are intrinsically different. To validate the results presented by the program, simulations were performed by varying the amount of grain, the grain size distribution and void fraction in the structure. All results showed statistically reliable and consistent with those presented in the literature. The mean values and distributions of stereological parameters measured, such as intercept linear section of perimeter area, sectional area and mean free path are in agreement with the results obtained in the literature for the structures simulated. The results may help the understanding of real structures.

Simulação computacional de medidas estereológicas em estruturas de metal duro (WC-Co)

This work focuses on the creation and applications of a dynamic simulation software in order to study the hard metal structure (WC-Co). The technological ground used to increase the GPU hardware capacity was Geforce 9600 GT along with the PhysX chip created to make games more realistic. The software simulates the three-dimensional carbide structure to the shape of a cubic box where tungsten carbide (WC) are modeled as triangular prisms and truncated triangular prisms. The program was proven effective regarding checking testes, ranging from calculations of parameter measures such as the capacity to increase the number of particles simulated dynamically. It was possible to make an investigation of both the mean parameters and distributions stereological parameters used to characterize the carbide structure through cutting plans. Grounded on the cutting plans concerning the analyzed structures, we have investigated the linear intercepts, the intercepts to the area, and the perimeter section of the intercepted grains as well as the binder phase to the structure by calculating the mean value and distribution of the free path. As literature shows almost consensually that the distribution of the linear intercepts is lognormal, this suggests that the grain distribution is also lognormal. Thus, a routine was developed regarding the program which made possible a more detailed research on this issue. We have observed that it is possible, under certain values for the parameters which define the shape and size of the Prismatic grain to find out the distribution to the linear intercepts that approach the lognormal shape. Regarding a number of developed simulations, we have observed that the distribution curves of the linear and area intercepts as well as the perimeter section are consistent with studies on static computer simulation to these parameters.

Reabilitação de estruturas religiosas desactivadas

Dissertação de Mestrado para a obtenção do grau de Mestre em Arquitectura, apresentada na Faculdade de Arquitectura da Universidade Técnica de Lisboa

Estruturas metodológicas direcionadas ao ensino de cinemática para educandos diagnosticados com TDAH : utilizando o modellus como interface interativa entre a teoria e a experimentação

Dissertação (mestrado)—Universidade de Brasília, Instituto de Física, Programa de Pós-Graduação em Física, 2015.

Desenvolvimento e caracterização de um compósito matriz metálica (CMM): aço EUROFER97 reforçado com Carbeto de Tântalo - TaC

Steel is an alloy EUROFER promising for use in nuclear reactors, or in applications where the material is subjected to temperatures up to 550 ° C due to their lower creep resistance under. One way to increase this property, so that the steel work at higher temperatures it is necessary to prevent sliding of its grain boundaries. Factors that influence this slip contours are the morphology of the grains, the angle and speed of the grain boundaries. This speed can be decreased in the presence of a dispersed phase in the material, provided it is fine and homogeneously distributed. In this context, this paper presents the development of a new material metal matrix composite (MMC) which has as starting materials as stainless steel EUROFER 97, and two different kinds of tantalum carbide - TaC, one with average crystallite sizes 13.78 nm synthesized in UFRN and another with 40.66 nm supplied by Aldrich. In order to improve the mechanical properties of metal matrix was added by powder metallurgy, nano-sized particles of the two types of TaC. This paper discusses the effect of dispersion of carbides in the microstructure of sintered parts. Pure steel powders with the addition of 3% TaC UFRN and 3% TaC commercial respectively, were ground in grinding times following: a) 5 hours in the planetary mill for all post b) 8 hours of grinding in the mill Planetary only for steel TaC powders of commercial and c) 24 hours in the conventional ball mill mixing the pure steel milled for 5 hours in the planetary mill with 3% TaC commercial. Each of the resulting particulate samples were cold compacted under a uniaxial pressure of 600MPa, on a cylindrical matrix of 5 mm diameter. Subsequently, the compressed were sintered in a vacuum furnace at temperatures of 1150 to 1250 ° C with an increment of 20 ° C and 10 ° C per minute and maintained at these isotherms for 30, 60 and 120 minutes and cooled to room temperature. The distribution, size and dispersion of steel and composite particles were determined by x-ray diffraction, scanning electron microscopy followed by chemical analysis (EDS). The structures of the sintered bodies were observed by optical microscopy and scanning electron accompanied by EDS beyond the x-ray diffraction. Initial studies sintering the obtained steel EUROFER 97 a positive reply in relation to improvement of the mechanical properties independent of the processing, because it is obtained with sintered microhardness values close to and even greater than 100% of the value obtained for the HV 333.2 pure steel as received in the form of a bar

Propriedade fotoluminescente da ZrO2: Tb+3, Eu+3, Tm+3 obtida pelo método de polimerização de complexos

Recent studies are investigating a new class of inorganic materials which arise as a promising option for high performance applications in the field of photoluminescence. Highlight for rare earth (TR +3 ) doped, which have a high luminous efficiency, long decay time and being able to emit radiation in the visible range, specific to each element. In this study, we synthesized ZrO2: Tb +3 , Eu +3 , Tm +3 nanoparticles complex polymerization method (CPM). We investigated the influences caused by the heat treatment temperature and the content of dopants in zirconia photoluminescent behavior. The particles were calcined at temperature of 400, 500 and 600 ° C for two hours and ranged in concentration of dopants 1, 2, 4 and 8 mol% TR +3 . The samples were characterized by thermal analysis, X-ray diffraction, photoluminescence of measurements and uv-visible of spectroscopies. The results of X-ray diffraction confirmed the formation of the tetragonal and cubic phases in accordance with the content of dopants. The photoluminescence spectra show emission in the region corresponding simultaneous to blue (450 nm), green (550 nm) and red (615 nm). According to the results, ZrO2 particles co-doped with rare earth ions is a promising material white emission with a potential application in the field of photoluminescence

Estratégias para intervenções de reparação e reforço em estruturas de betão armado

Já se passaram algumas décadas desde que o betão é o principal material de construção que ergue cidades e estruturas nas civilizações contemporâneas. Num passado não muito longínquo, a área da durabilidade, manutenção e prevenção das estruturas de betão não foi vista como prioridade, chegando a ser negligenciada, por consequência hoje existem graves problemas nalgumas construções de betão. Por outro lado, devido ao excedente de construção habitacional em Portugal e à, a atual conjuntura económica/financeira que a Europa atravessa, o setor da construção tem sofrido um abrandamento acentuado. A consciência e postura de sustentabilidade das novas gerações e entidades competentes, acentuou a necessidade de preservar, reparar e reforçar muito do património no parque habitacional português e europeu. O projeto de intervenção numa estrutura nunca é abordada da mesma maneira, não existem duas estruturas iguais, e há particularidades neste tipo de projetos que não existem num projeto de uma estrutura nova. Para intervir numa estrutura já construída é necessário um conhecimento abrangente em várias temáticas, tais como: regulamentação, métodos de avaliação de segurança, definição das características mecânicas dos materiais, técnicas de reparação e reforço, metodologias de diagnostico e intervenção, comportamento estrutural, etc. Atualmente existe muita informação acerca da temática de reparação e reforço de estruturas de betão armado, no entanto há ainda alguma falta de documentação onde a informação aparece de forma integral e objetiva. Consideando o apresentado anteriormente, tentou-se compilar informação sobre os principais assuntos que interessam a um projeto de reparação/reforço de estruturas de betão armado, nomeadamente as normas e legislação aplicável, exemplos de metodologias de inspeção e intervenção, os principais ensaios em laboratório e in situ para caracterização dos materiais, principais técnicas de reparação/reforço. Sobre este tópico e a título de exemplo, aprofundou-se com mais detalhe as considerações relativas ao dimensionamento com reforço com FRP´s.

Aditivação de pastas geopoliméricas com tetraborato de sódio e látex não iônico para cimentação de Poços de Petróleo

The development of activities in the oil and gas sector has been promoting the search for materials more adequate to oilwell cementing operation. In the state of Rio Grande do Norte, the cement sheath integrity tend to fail during steam injection operation which is necessary to increase oil recovery in reservoir with heavy oil. Geopolymer is a material that can be used as alternative cement. It has been used in manufacturing of fireproof compounds, construction of structures and for controlling of toxic or radioactive waste. Latex is widely used in Portland cement slurries and its characteristic is the increase of compressive strength of cement slurries. Sodium Tetraborate is used in dental cement as a retarder. The addition of this additive aim to improve the geopolymeric slurries properties for oilwell cementing operation. The slurries studied are constituted of metakaolinite, potassium silicate, potassium hydroxide, non-ionic latex and sodium tetraborate. The properties evaluated were: viscosity, compressive strength, thickening time, density, fluid loss control, at ambient temperature (27 ºC) and at cement specification temperature. The tests were carried out in accordance to the practical recommendations of the norm API RP 10B. The slurries with sodium tetraborate did not change either their rheological properties or their mechanical properties or their density in relation the slurry with no additive. The increase of the concentration of sodium tetraborate increased the water loss at both temperatures studied. The best result obtained with the addition of sodium tetraborate was thickening time, which was tripled. The addition of latex in the slurries studied diminished their rheological properties and their density, however, at ambient temperature, it increased their compressive strength and it functioned as an accelerator. The increase of latex concentration increased the presence of water and then diminished the density of the slurries and increased the water loss. From the results obtained, it was concluded that sodium tetraborate and non-ionic latex are promising additives for geopolymer slurries to be used in oilwell cementing operation