Utilização do defletómetro de impacto ligeiro, do GeoGauge e do densímetro elétrico para o controlo in situ da qualidade de materiais em obras de pavimentação rodoviária

A presente dissertação procura contribuir para avaliar a utilidade de três equipamentos ligeiros na caracterização in situ de materiais de pavimentação de infraestruturas de transporte. Aquele tipo de avaliação visa o controlo de qualidade dos materiais durante o processo construtivo, embora possa contribuir também para estimar o comportamento previsível dos materiais utilizados. O estudo centrou-se principalmente na utilização do Defletómetro de Impacto Ligeiro (DIL), do GeoGauge (GG) e do Densímetro Elétrico (DE). No entanto, realizaramse complementarmente ensaios com o Cone de Penetração Dinâmica (CPD), com o Gamadensímetro (GD) e com o Indicador de Qualidade de Pavimentos (IQP). O GG e o DIL foram concebidos com o objetivo de medirem o módulo de deformabilidade de camadas constituídas por solo ou por materiais granulares. O DE destina-se a avaliar a qualidade da compactação de camadas de solo. Numa fase inicial do trabalho, fez-se uma recolha bibliográfica sobre as características, os princípios de funcionamento e o modo operatório de cada um dos equipamentos, de modo a apoiar o estudo de caso que se realizou mais tarde no âmbito do trabalho. O estudo bibliográfico centrou-se ainda na procura dos parâmetros que é possível medir com cada um dos equipamentos estudados, bem como na procura de relações entre aqueles parâmetros. Para a realização da campanha de ensaios previamente estabelecida, o estudo incluiu a construção de um modelo físico de pavimento. O pavimento construído, com dimensões em planta da ordem de 2 1,5 m2, é constituído por duas estruturas diferentes, assentes sobre a mesma fundação, com uma espessura total de 29 cm: uma formada por uma camada granular e uma camada betuminosa; a outra constituída por uma camada de solo estabilizado com cimento e uma camada betuminosa. Os materiais constituintes do modelo foram caracterizados em laboratório e/ou in situ com recurso a ensaios convencionais. Nalguns casos recorreu-se às fichas de produto para recolher as propriedades necessárias. Na fundação estudou-se a utilização do DIL, do GG e do DE. Adicionalmente, avaliou-se o solo, com o CPD e com o GD. Nas camadas granular e de solo estabilizado estudou-se a utilização do DIL, do GG e do GD. Na camada betuminosa efetuaram-se ensaios com o DIL e com o IQP. Em cada um dos materiais colocados foi estudada a utilização dos equipamentos individualmente, de modo a obter os parâmetros caracterizadores dos materiais: o CBR (com o CPD), o módulo de deformabilidade (com o DIL, o GG e o CPD), a baridade seca e o teor em água (com o GD e o DE), a baridade (com o IQP). Quando se revelou útil, compararam-se resultados obtidos com os diferentes equipamentos para cada um dos materiais. Em termos gerais, pode afirmar-se que a utilização dos equipamentos testados pode contribuir de forma útil para avaliar os materiais in situ. Contudo, foram detetadas fragilidades no processo de caracterização, particularmente no que diz respeito à análise de sistemas multicamada com o DIL. O processo de calibração necessário à obtenção de resultados fiáveis com o DE revelou-se pouco prático. Além disso, o GG permitiu obter resultados com baixa variabilidade, embora geralmente bastante diferentes dos obtidos com o DIL. Os equipamentos complementares estudados neste trabalho mostraram ser úteis na avaliação dos materiais. Em suma, para que o controlo de qualidade seja efetivo, é necessário estabelecer, através de estudos mais alargados, quais os materiais em os equipamentos estudados podem ser utilizados com propriedade, e quais os critérios de aceitação/rejeição dos materiais que devem ser considerados em cada caso.

Dois ensaios em finanças

In the first chapter, we test some stochastic volatility models using options on the S&P 500 index. First, we demonstrate the presence of a short time-scale, on the order of days, and a long time-scale, on the order of months, in the S&P 500 volatility process using the empirical structure function, or variogram. This result is consistent with findings of previous studies. The main contribution of our paper is to estimate the two time-scales in the volatility process simultaneously by using nonlinear weighted least-squares technique. To test the statistical significance of the rates of mean-reversion, we bootstrap pairs of residuals using the circular block bootstrap of Politis and Romano (1992). We choose the block-length according to the automatic procedure of Politis and White (2004). After that, we calculate a first-order correction to the Black-Scholes prices using three different first-order corrections: (i) a fast time scale correction; (ii) a slow time scale correction; and (iii) a multiscale (fast and slow) correction. To test the ability of our model to price options, we simulate options prices using five different specifications for the rates or mean-reversion. We did not find any evidence that these asymptotic models perform better, in terms of RMSE, than the Black-Scholes model. In the second chapter, we use Brazilian data to compute monthly idiosyncratic moments (expected skewness, realized skewness, and realized volatility) for equity returns and assess whether they are informative for the cross-section of future stock returns. Since there is evidence that lagged skewness alone does not adequately forecast skewness, we estimate a cross-sectional model of expected skewness that uses additional predictive variables. Then, we sort stocks each month according to their idiosyncratic moments, forming quintile portfolios. We find a negative relationship between higher idiosyncratic moments and next-month stock returns. The trading strategy that sells stocks in the top quintile of expected skewness and buys stocks in the bottom quintile generates a significant monthly return of about 120 basis points. Our results are robust across sample periods, portfolio weightings, and to Fama and French (1993)’s risk adjustment factors. Finally, we identify a return reversal of stocks with high idiosyncratic skewness. Specifically, stocks with high idiosyncratic skewness have high contemporaneous returns. That tends to reverse, resulting in negative abnormal returns in the following month.

Ensaios sobre algumas enfermedades d'Angola ... /

Mode of access: Internet.

Memoria sobre as minas da capitania de Minas Geraes : suas descripções, ensaios, e domicilio proprio, á maneira de itinerario /

"Com um appendice sobre a nova lorena diamantina, sua descripção, suas producções mineralógicas, e utilidades que d'este paiz possam resultar ao estado."

Ensaios sobre a statistica das possessões portuguezas na Africa occidental e oriental; na Asia occidental; na China, e na Oceania: escriptos ...

Title of v. 4-5 reads: Ensaios sobre a estatistica das possessões portuguezas ... começados a escrever ... por José Joaquim Lopes de Lima e continuados por Francisco Maria Bordalo.

ORLANDO COSTAS: ENSAIOS NO CAMINHO PARA UMA PASTORAL EVANGÉLICA LATINO-AMERICANA

Nesta pesquisa se propõe analisar a pastoral evangélica latino-americana elaborada por Orlando Costas. Teólogo pastoralista, missiólogo e de origem porto-riquenha, Costas elaborou método e metodologia de pastoral a partir de sua confissão religiosa evangelical em diálogo ecumênico e em consonância crítica com a situação política, econômica, social e religiosa de Porto Rico e da América Latina. Costas, juntamente com Emilio Castro, foi um dos primeiros a lançar as bases para uma pastoral evangélica visando ao homem latino-americano. Criticou o modelo da teologia pastoral norte-atlântica centrada no pastor com sujeito da ação pastoral da igreja alegando ser; repetitiva, profissional e eclesiocêntrica. A pesquisa foi realizada em três passos, que se realizam nos capítulos um, dois e três, respectivamente, compreender o contexto político, econômico, social e religioso da vida de Orlando Costas a partir de Porto Rico, suas experiências de conversão-ruptura dentro da sua tradição religiosa e a nova percepção pastoral; analisar o desenvolvimento histórico teológico da pastoral evangélica, ou seja, os movimentos, conferências, instituições e teólogos que influenciaram o pensamento de Costas; e, apresentar os fundamentos missiológicos e teológicos da pastoral evangélica, em que se demonstra que a pastoral de Costas é missiológico-pastoral, pois assume a missio Dei como princípio arquitetônico e a pastoral como princípio hermenêutico para a ação missional e pastoral. Conclui-se que a proposta de Costas é de uma pastoral evangélica e ecumênica, contextual e autóctone, dentro e fora da igreja.(AU)

JORNAL-LABORATÓRIO, UMA ATIVIDADE PEDAGÓGICA MUITO ALÉM DO EXERCÍCIO DE MARKETING

A relação entre jornal-laboratório e marketing das instituições de ensino superior é analisada no trabalho. Valendo-se do estudo de casos múltiplos, são comparados impressos laboratoriais, reconhecidos no meio acadêmico pelo valor pedagógico do exercício proporcionado aos alunos, com aqueles que circulam como ¬house-organs¬, trazendo informações positivas das respectivas faculdades. Eles são examinados com base nos conceitos de ensino de jornalismo e de marketing, especialmente para instituições educacionais. O objetivo é demonstrar que jornais-laboratório transformados em jornais de empresa, no intuito de atender a necessidades de comunicação das instituições com o mercado, contrariam o que é preconizado pelo ensino de jornalismo e pelo próprio marketing. É possível perceber que impressos laboratoriais que simulam a realidade da profissão, com o propósito pedagógico, estão mais adequados como produto ao mix de comunicação porque levam o estudante, como consumidor, a vivenciar situações marcantes de aprendizado, conforme estabelece o marketing de experiências para levar clientes à lealdade com as organizações.(AU)

O laboratório de ensino de matemática temático centrado nos instrumentos de navegação: uma proposta para o IFRN de Mossoró-RN

This work presents a proposal to build a Mathematics Teaching Laboratory (MTL) whose main theme is the study, construction and use of instruments for navigation and location of mathematical content in an interdisciplinary way approach, and develop a notebook of activities focused on navigational instruments. For this it was necessary a literature review to understand the different conceptions of MTL and its pedagogical implications. The methodology used was literature research, construction and handling of instruments, and pedagogical experimentation. Lorenzato (2006) highlights the importance of an environment and suitable for a professional who can do a good job instruments. The implementation of an LEM can find some obstacles. The lack of support from other teachers or the management, the lack of a suitable place to store the materials produced, the lack of time in the workload of the teacher to prepare the lab activity, etc. Even in unfavorable or adverse conditions, according Lorenzato (2006), its implementation will benefit teachers and students. The lack of teacher training in their initial and continuing education, to use materials, and the lack of manuals with lab activities are also mentioned as factors that keep teachers from MTL. With propóposito assist the teacher of elementary or middle school in building a theme MTL prepared and we are providing a notebook of activities that provides a didactic sequence involving History and Mathematics. The book consists of four accompanied by suggestions for teachers activities, however the teacher has full autonomy to adapt the activities to the reality of your school. Among the instruments of navigation presented in this study chose to build the quadrant due to its simplicity, low cost of material and great teaching potential that this instrument has. But a theme lab is always being built and rebuilt as it is a research environment

Estudo de um sistema de frenagem eletromagnética empregando correntes parasitas

This work deals with the analytical, computational and experimental study of phenomena related to the Eddy current induction in low permeability means for embedded electromagnetic braking systems applications. The phenomena of forces generation in opposing to the variation of stationary magnetic flux produced by DC power supplies, set in motion by the application of an external propulsive force are addressed. The study is motivated by search for solving the problem of speed control of PIGs used to verifying and maintaining pipelines, and is led based on the analytical models synthesis, validated by means of computer simulations in Finite Elements environment, provided by engineering support software; and with experimental tests conducted under controlled laboratory conditions. Finally, a damping systems design methodology based on analyzes results conducted throughout the study is presented

Influência da granulometria e taxas de filtração no tratamento de água utilizando dupla filtração

The contamination of water sources of public drinking by waste originated by anthropogenic activities has brought various risks to human health. Among the consequences of such activities can highlight the bloom of microalgae and cyanobacteria, which have the potential to produce toxins dangerous to humans, and the presence of humic substances that are generated by the decomposition of natural organic matter (NOM), such as vegetation. When found in water sources for public supply, present negative aspects conferring high color, odor and taste. The double filtration technology has good efficiency in water with the presence of cyanobacteria and different quality variations. Therefore, this study aimed to evaluate the behavior of the technique of double filtration with pre-oxidation for water purifiers the lagoon of Extremoz-RN, which currently has high concentrations of cyanobacteria. The research is summarized in four phases: the first phase turned to static tests in jarteste equipment in the laboratory and subsequent phases were tested in the Pilot Plant of Double Filtration. For the second and third stage filtration rates were tested filtration rates of 120 and 180 m3 / m2 .day for ascending boulders filters and 160 and 240 m3 / m2 .day in the filters in quick sand descendants. The last phase aimed to evaluate the double filtration with pre-oxidation. The results demonstrated that the system could produce double filtration in all trials of good quality water according to the Decree nº. 2914/11 of the Ministry of Health. The use of preoxidation favored the removal of microcystin and color at the end of the tests, reaching a percentage of color removal around 60%. The analysis of variance in the data, enabled prove that the filtration rates of 180 m3 / m2.d the gravel filter and 240 m3 /m2 .d in rapid filters, were the most significant for the removal of turbidity. The ascending filter of boulder 4 with particle size finer filter layer showed the best performance and the best means of turbidity and apparent color. The rapid filter downward 1 was more efficient in removing turbidity reaching removal about 100%

Ambiente de inovação no Laboratório de Inovação Tecnológica em Saúde – LAIS/UFRN: mapeamento, interações e gerenciamento

Innovation has become an increasingly central issue of great reputation, not only in literature but also in management practices, becoming a strategic issue for managers of organizations. Allied to this, there is a high degree of competitiveness on the market, which contributes to the complexity of decision making, since managers need to maintain a continuous cycle of renewal processes and products. Thus, market pressures for new alternatives encourage innovation within organizations as a foundation for culture change in pursuit of survival and increased competitiveness, making it essential to know the factors that promote the advancement of organizational environments targeted innovation. Confirming this view, Bouchikhi and Kimberly (2001) symbolically expressed the idea with two statements: (1) companies need to innovate to survive, otherwise they die; and (2) the wide recognition of this need, as well as the difficulty to encourage and support innovation and entrepreneurship in business, has generated a mini-industry research and consulting in management focused on these topics. This study is characterized as descriptive with qualitative and quantitative methods. As for the planning of the research, it was decided to bibliographical research and the case study. The research, developed here, is meant to examine the organizational environment of a laboratory focused on technological innovation in health, which is a reference in research and technology of Rio Grande do Norte, and ensure that it presents opportunities to develop innovations. Therefore, the technologies developed by the Laboratório de Inovação Tecnológica em Saúde - LAIS/UFRN were mapped and then a questionnaire with the stakeholders of LAIS/UFRN was applied. This questionnaire is closed and Likert scale. As a result, it follows that the dimensions 1, 6, 7 and 8 are the most influential to form an innovative environment at LAIS.

Avaliação da conformidade dos blocos cerâmicos produzidos em algumas cerâmicas no Rio Grande do Norte

The final quality of the works accomplished by the building construction industry depends directly on the quality of the materials supplied and used during all their phases of execution. The federal government participation and several state programs have established conditions to stimulate and require the increment of the quality level in the building construction industry´s product chain. These programs aim at the product conformity to the technical standards. Within this context, the evaluation program of the ceramic product conformity in Rio Grande do Norte state is assessing the conformity degree to Brazilian Technical Standards of ceramic bricks and tiles made in the ceramic production area in the state. In this work, is determine the degree of conformity of the sealing ceramic bricks made by some companies in different areas of the state, such as Assú, São Gonçalo do Amarante, Apodi, Parelhas, São José do Mipibu e Macaíba. Using the technical standards as a point of reference, we attempted to reproduce in the laboratory the experimental procedures to the analysis execution, according to the specifications. It was possible to determine that none of the evaluated samples are in strict conformity with the current technical standards, what reflects the real situation of the products available on the market.

Topologia de gerador de distúrbios elétricos baseada em conversores de potência

Electrical disturbances such as voltage sags, interruptions and voltage unbalances might cause serious problems for the end-user and for the companies of generation and transmission of energy. Few years ago, those companies have been using methods and equipments of protection to avoid the disturbances’ presence or to mitigate their effects on the power system. Disturbances generators are used to analyse the behavior of electrical and electronic equipments affected by disturbances. The analysis of those failures allows the development of appropriated protection equipments. In this paper, the development of a disturbances generator based on power converters is presented. The disturbance generator developed is able to generate some symmetrical disturbances, such as: voltage sags, voltage swells and harmonic distortion. The control strategy used in the disturbance generator is based on discrete and repetitive control. The steps of the design of the control and of the filter used for reducing harmonic in the output, are detailed in the text. Are presented the obtained results on computational simulations and the obtained results on laboratory tests.

Influência do retardante de chamas nas propriedades mecânicas e flamabilidade em compósitos poliméricos de epóxi/fibra de curauá

Currently, there is a great search for materials derived from renewable sources. The vegetable fibers as reinforcement for polymer matrixes, has been used as an alternative to replace synthetic fibres, being biodegradable and of low cost. The present work aims to develop a composite material with epoxy resin reinforced with curauá fibre with the addition of alumina trihydrate (aluminum hydroxide, Al(OH)3) as a flame retardant, which was used in proportions of 10 %, 20% and 30% of the total volume of the composite. The curauá fibers have gone through a cleaning process with an alkaline bath of sodium hydroxide (NaOH ), parallelized by hand and cut carding according to the default length . They were molded composites with fibers 30cm. Composites were molded in a Lossy Mold with unidirectional fibres in the proportion of 20% of the total volume of the composite. The composites were prepared in the Chemical Processing Laboratory of the Textile Engineering Department at UFRN. To measure the performance of the material, tests for the resistance to traction and flexion were carried out. with samples that were later analyzed in the Electronic Microscopy Apparatus (SEM ). The composites showed good mechanical properties by the addition of flame retardant and in some cases, leaving the composite more vulnerable to breakage. These mechanical results were analyzed by chi-square statistical test at the 5% significance level to check for possible differences between the composite groups. Flammability testing was conducted based on the standard Underwriters Laboratory 94 and the material showed a satisfactory result taking their average burn rate (mm / min) decreasing with increasing addition of the flame retardant composite.

Avaliação da aplicabilidade de correlações matemáticas e redes neurais na predição de parâmetros de especificação do diesel

Diesel fuel is one of leading petroleum products marketed in Brazil, and has its quality monitored by specialized laboratories linked to the National Agency of Petroleum, Natural Gas and Biofuels - ANP. The main trial evaluating physicochemical properties of diesel are listed in the resolutions ANP Nº 65 of December 9th, 2011 and Nº 45 of December 20th, 2012 that determine the specification limits for each parameter and methodologies of analysis that should be adopted. However the methods used although quite consolidated, require dedicated equipment with high cost of acquisition and maintenance, as well as technical expertise for completion of these trials. Studies for development of more rapid alternative methods and lower cost have been the focus of many researchers. In this same perspective, this work conducted an assessment of the applicability of existing specialized literature on mathematical equations and artificial neural networks (ANN) for the determination of parameters of specification diesel fuel. 162 samples of diesel with a maximum sulfur content of 50, 500 and 1800 ppm, which were analyzed in a specialized laboratory using ASTM methods recommended by the ANP, with a total of 810 trials were used for this study. Experimental results atmospheric distillation (ASTM D86), and density (ASTM D4052) of diesel samples were used as basic input variables to the equations evaluated. The RNAs were applied to predict the flash point, cetane number and sulfur content (S50, S500, S1800), in which were tested network architectures feed-forward backpropagation and generalized regression varying the parameters of the matrix input in order to determine the set of variables and the best type of network for the prediction of variables of interest. The results obtained by the equations and RNAs were compared with experimental results using the nonparametric Wilcoxon test and Student's t test, at a significance level of 5%, as well as the coefficient of determination and percentage error, an error which was obtained 27, 61% for the flash point using a specific equation. The cetane number was obtained by three equations, and both showed good correlation coefficients, especially equation based on aniline point, with the lowest error of 0,816%. ANNs for predicting the flash point and the index cetane showed quite superior results to those observed with the mathematical equations, respectively, with errors of 2,55% and 0,23%. Among the samples with different sulfur contents, the RNAs were better able to predict the S1800 with error of 1,557%. Generally, networks of the type feedforward proved superior to generalized regression.