Eletroacupuntura aplicada nas fases precoce e tardia da cicatrização do tendão calcanear comum de coelhos após reparo tardio com peritônio bovino conservado em solução supersaturada de sal: aspectos clínicos

Para avaliar o uso da eletroacupuntura (EA) sobre os aspectos clínicos e deambulatórios, 36 coelhos tiveram o tendão calcanear comum seccionado e, após 30 dias, receberam enxerto de peritônio bovino conservado em solução supersaturada de sal. em seguida, os animais foram distribuídos aleatoriamente em três grupos de igual número: no primeiro grupo, os coelhos foram estimulados pela EA do segundo ao 11° dia de pós-operatório (PO) (E10); no segundo grupo do 11o ao 31o dia de PO (E20) e, no terceiro grupo, os animais não foram estimulados (C). Verificou-se, nos animais do E10, durante o PO, ausência de edema e hiperemia no membro tratado pela EA. Não se observou diferença significativa (P>0,05) entre os grupos quanto ao grau de deambulação dos animais. Todos os coelhos tiveram completa recuperação da deambulação até os 51 dias de PO. A utilização da eletroacupuntura na fase precoce da cicatrização do tendão calcanear comum de coelhos impediu a formação de edema e hiperemia. O tratamento com eletroacupuntura no PO não melhorou o desempenho da deambulação.

Aspectos clínicos e radiográficos da osteodistrofia hipertróica em cães: estudo retrospectivo de 16 casos

Descrevem-se 16 casos de osteodistrofia hipertrófica (OH) entre 13.483 casos levantados nos arquivos do Setor de radiologia do Hospital Veterinário Governador Laudo Natel da FCAVJ-UNESP, entre 1° de janeiro de 1977 a 31 de dezembro de 1995. A enfermidade mostrou-se de baixa manifestação clínica, atingindo cães jovens em fase de crescimento, pertencentes às raças de grande porte e supernutridos. Destaca-se ainda, a importância do exame radiográfico seriado no diagnóstico da enfermidade e principalmente como método de avaliação da reversão clínica do processo, mormente quando ocorre bacteremia associada.

Aspectos clínicos e concentração sérica da creatina-quinase e lactato-desidrogenase em cães submetidos à fisioterapia após atrofia muscular induzida

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Alterações morfológicas de tecido laminar do casco e parâmetros clínicos e laboratoriais de equinos com síndrome cólica letal

As afecções gastrintestinais dos cavalos são agravadas por complicações como a laminite, cuja etiopatogenia está relacionada à degradação da membrana basal do tecido laminar por metaloproteinases (MMPs). A ativação das MMPs pode ocorrer devido à liberação local de citocinas inflamatórias ou enzimas provenientes de leucócitos infiltrados no tecido laminar. O objetivo deste trabalho foi avaliar as alterações morfológicas do tecido laminar de equinos com síndrome cólica letal e sua provável associação com parâmetros clínicos e laboratoriais. Observou-se intensa destruição da arquitetura laminar, principalmente nos animais com alterações físicas e laboratoriais mais acentuadas, como tempo de preenchimento capilar prolongado (TPC), membranas mucosas congestas, taquicardia, hemoconcentração e redução nas contagens de plaquetas e leucócitos. Os resultados sinalizam o provável momento do desenvolvimento de lesões do tecido laminar em equinos com síndrome cólica, no qual é possível adotar medidas preventivas contra a laminite.

Evaluation of thyroxine (T4) and progesterone-17-alpha-OH circadian rhythm in swine females (Sus scrofa domestica - Linnaeus, 1758)

No presente trabalho foram utilizadas quatro fêmeas suínas, adultas, mestiças, não-gestantes e sem sinais clínicos de estro, criadas e mantidas sob condições industriais de criação. Objetivou-se avaliar a ocorrência de ritmicidade biológica circadiana para tiroxina e 17-alfa -OH progesterona. Os ensaios para dosagens hormonais foram executados utilizando-se a técnica de radioimunoensaio (RIE) em fase sólida e para isso foi empregado conjunto de reagentes comerciais (COAT-A-COUNT R). As análises séricas de tiroxina mostraram valores mais elevados ao redor das 15 horas, decrescendo a partir dai até atingir níveis menores no intervalo da zero às 4 horas. Quanto a 17-alfa -OH progesterona, observaram-se níveis mais elevados por volta das 3 horas, decrescendo gradativamente ao longo do dia, até atingir menor concentração no intervalo das 12 às 15 horas.

Toxoplasmose canina: aspectos clínicos e patológicos

Inquiries about toxoplasmosis are essential because its zoonotic potential and pathogenicity in pets and production animals. The dog can be involved in the mechanical transmission of the infection by Toxoplasma gondii and in spite of not being the definitive host, it has an epidemiological role in this disease. The high rate of dogs naturally infected by T gondii and the great possibility of adquiring this protozoan, justify the importance of attempting against for the occurrence of this illness. The aim of this article was to demonstrated through literature revision, some clinical aspects, epidemic and pathological of the toxoplasmosis in the canine species.

Aspectos clínicos e patológicos em frangos de corte (Gallus gallus domesticus) infectados experimentalmente com oocistos esporulados de Eimeria acervulina Tyzzer, 1929

No presente estudo, sinais clínicos e alterações patológicas foram avaliados por 30 dias em frangos de corte, linhagem Cobb, machos, com dez dias de idade, infectados com Eimeria acervulina. Foram utilizados 192 animais distribuídos em 3 grupos: grupo A inoculado com 1x10(6) oocistos esporulados; grupo B inoculado com 1x10(5) oocistos esporulados; grupo C inoculado com água destilada. Os sinais clínicos observados foram anorexia, diarréia e apatia. As alterações patológicas macroscópicas observadas foram: enterite, hiperemia seguido de congestão intestinal, excesso de exsudato mucoso no lúmen do intestino delgado, palidez e desidratação muscular, alto acúmulo de bile na vesícula biliar e deposição de gordura hepática. A atrofia de vilosidades e alta presença de células inflamatórias foram as alterações microscópicas observadas no epitélio intestinal. Na análise histopatológica do fígado observaram-se infiltrados inflamatórios e deposição de gordura. Os resultados demonstraram que frangos de corte infectados experimentalmente com E. acervulina apresentam progressivas lesões intestinais de intensidade variável e que essas anormalidades são as principais causas de redução no desenvolvimento da ave.

Qualidade de vida de pessoas com úlcera venosa: associação dos aspectos sociodemográficos, de saúde, assistência e clínicos da lesão

Venous ulcer (VU) is a lower limbs injury resulting from inadequate return of venous blood in feet or legs. Although it is not a deadly disease, it causes chronic wounds, which seriously undermine patients´ quality of life (QOL) and sometimes leads to drastic family, social, economic and psychological changes. In this sense, there are several aspects that may influence the venous ulcers patients´ QOL. The study´s objective aimed on the association of socio-demographic and health, health care and clinical injury on UV patients‟ QOL. Analytical studies, which consider the complexity of factors involved in changes in UV patients‟ QOL has a cross-sectional and quantitative approach. The HUOL Ethics Committee approved this project (n.279/09). The collection of data lasted a period of 3 months in 2010 and it took place at the clinic of Angiology at Hospital Universitário Onofre Lopes (HUOL). The data sample consisted of 60 patients treated by UV angiologists in the HUOL Surgical Clinic. The results were analyzed with SPSS 15.0 by descriptive and inferential statistics. The study was based on UV patients that were predominantly female, average age of 61.4 years, that had low education level and low family income, with occupations requiring long periods of standing or sitting, but mostly retired, unemployed or laid off due to the disease and/or due to chronic diseases associated with the UV. The study took also into consideration patients that used inappropriate products, that were improperly treated by a professional caregiver, that lacked of adequate guidance and compression therapy, that performed no lifting of the lower limbs and regular exercise, that the time of injury were greater than or equal to six months, that were missing specific laboratory tests. The study‟s reference were on recurrent lesions, medium to large lesions area, bed of the lesion (injuries) with fibrin and/or necrosis, with amount of exudate with medium to large, odorless and no signs of infection, with tissue loss between 1st and 2nd degree, without collecting swab or biopsy and with pain. In general, QOL of researched individuals were considered low, the maximum score was 69 points, which the areas that were mostly influenced were the total scores of QOL functional capacity (0.021), emotional (0.000) and social functioning (0.080). Of the 60 individuals, 53.3% had scores between 40 and 69 points in SF-36, and they had the best scores in sociodemographic and health variables (ρ = 0.049). In respect to the assistance and injury characteristics, patients who scored between 40 and 69 points in SF-36 had better scores on these characteristics. By combining the socio-demographic variables, health, and handling characteristics of the injury, we observed a significant difference (ρ = 0.032) when linking them with the QOL total scores. When analyzing separately the domains of the SF-36 scores on the quality of life, we find that the areas that showed statistical significance were functional ability (ρ = 0.035), appearance (ρ = 0.019), emotional (ρ = 0.000), and mental health (ρ = 0.050). Among the socio-demographic characteristics studied, gender and marital status contributed more to the reduction of QOL and among the variables of assistance and the injury, orientation, reference and area of UV contributed the most. By analyzing these five variables all together in accordance with the overall score obtained in the quality of life, we found a significant correlation (ρ = 0.002); with 6.23 times more chances of patients have better QOL in the presence of these five positive factors. By conducting the Mann Whitney U test between all the five demographic variables, health, and clinical care, we found that this combination also proved to be significant (ρ = 0.006). Therefore, patients with these five variables positive tend to have a better QOL. Based on these results, we reject the null hypothesis (H0) and accept the alternative hypothesis (H1) proposed in this study because we noted that the QOL of patients with UV is associated with sociodemographic and health, health care and clinical aspects of the injury

Acurácia dos indicadores clínicos do diagnóstico de enfermagem volume de líquidos excessivo em pacientes submetidos à hemodiálise

Trasnversal study, with the objective of evaluating the accuracy of clinical indicators of nursing diagnosis excessive fluid volume in patients undergoing hemodialysis. The study occurred in two stages, the first consisted of the evaluation of the diagnostic indicators in study; and the second, the diagnostic inference conducted by nurse diagnosticians. The first stage occurred from december 2012 to april 2013, in a University Hospital and a Hemodialysis Clinic in Northeastern of Brazil, with a sample of 100 chronic renal failure patients on hemodialysis. The data were selected through an interview form and a physical examination, organized into spreadsheets and analyzed as to the presence or absence of the indicators of diagnosis excessive fluid volume. In the second step, the spreadsheets were sent to three nurses diagnosticians, who judged the presence or absence of diagnosis in the clientele searched. This step was conducted from july to september 2013. For analysis of the data, we used descriptive and inferential statistics. In the descriptive analysis, we used measures of central tendency and dispersion. In inferential analysis, we used the tests Chi- square, Fisher and prevalence ratios. The accuracy of the clinical indicators pertaining to the diagnosis were measured as to the specificity, sensitivity, predictive values, likelihood ratios and Diagnostic Odds Ratio. Also developed a logistic regression. The results were organized in tables and discussed with literature. This study was approved by the Ethics Committee in Research of the Federal University of Rio Grande do Norte, with Presentation Certificate for Ethics Appreciation nº 08696212.7.0000.5537. The results revealed that the diagnosis studied was present in 82% of patients. The characteristics with prevalence above 50 % that stood out were: azotemia, decreased hematocrit, electrolyte imbalance, intake exceeds output, anxiety, edema, decreased hemoglobin, oliguria and blood pressure changes. Eight defining characteristics were presented statistically significant association with the nursing diagnosis investigated: pulmonary congestion, intake exceeds output, electrolytes imbalance, jugular vein distension, edema, weight gain over short period of time, agitation and adventitious breath sounds. Among these, the 10 characteristics which showed higher prevalence ratios were: edema and weight gain over short period of time. The features with the highest sensitivity were edema, electrolytes imbalance and intake exceeds output and the standing out with greater specificity were: anasarca, weight gain over short period of time, change in respiratory pattern, adventitious breath sounds, pulmonary congestion, agitation and jugular vein distension. The indicators jugular vein distension, electrolytes imbalance, intake exceeds output, increased central venous pressure and edema, together, were identified in the logistic regression model as the most significant predictors. It is concluded that the identification of accurate clinical indicators allow a good prediction of the nursing diagnosis of excessive fluid volume in patients undergoing hemodialysis in order to assist the nurse in the inference process, which will contribute to the success of patient care. In addition, nurses will consider for diagnostic inference not only his clinical experience, but also scientific evidence of the occurrence of excessive fluid volume, contributing to the control of volemia in these patients

Avaliação de indicadores internos em ensaios de digestibilidade

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sistema híbrido para detecção e diagnóstico de falhas em sistemas dinâmicos

The industries are getting more and more rigorous, when security is in question, no matter is to avoid financial damages due to accidents and low productivity, or when it s related to the environment protection. It was thinking about great world accidents around the world involving aircrafts and industrial process (nuclear, petrochemical and so on) that we decided to invest in systems that could detect fault and diagnosis (FDD) them. The FDD systems can avoid eventual fault helping man on the maintenance and exchange of defective equipments. Nowadays, the issues that involve detection, isolation, diagnose and the controlling of tolerance fault are gathering strength in the academic and industrial environment. It is based on this fact, in this work, we discuss the importance of techniques that can assist in the development of systems for Fault Detection and Diagnosis (FDD) and propose a hybrid method for FDD in dynamic systems. We present a brief history to contextualize the techniques used in working environments. The detection of fault in the proposed system is based on state observers in conjunction with other statistical techniques. The principal idea is to use the observer himself, in addition to serving as an analytical redundancy, in allowing the creation of a residue. This residue is used in FDD. A signature database assists in the identification of system faults, which based on the signatures derived from trend analysis of the residue signal and its difference, performs the classification of the faults based purely on a decision tree. This FDD system is tested and validated in two plants: a simulated plant with coupled tanks and didactic plant with industrial instrumentation. All collected results of those tests will be discussed

Fresamento com ar quente: uma proposta para minimizar a formação de trincas térmicas em ferramentas de metal duro

This work presents the results, analyses and conclusions about a study carried out with objective of minimizing the thermal cracks formation on cemented carbide inserts during face milling. The main focus of investigation was based on the observation that milling process is an interrupted machining process, which imposes cyclic thermal loads to the cutting tool, causing frequent stresses changes in its superficial and sub-superficial layers. These characteristics cause the formation of perpendicular cracks from cutting edge which aid the cutting tool wear, reducing its life. Several works on this subject emphasizing the thermal cyclic behavior imposed by the milling process as the main responsible for thermal cracks formation have been published. In these cases, the phenomenon appears as a consequence of the difference in temperature experienced by the cutting tool with each rotation of the cutter, usually defined as the difference between the temperatures in the cutting tool wedge at the end of the cutting and idle periods (T factor). Thus, a technique to minimize this cyclic behavior with objective of transforming the milling in an almost-continuous process in terms of temperature was proposed. In this case, a hot air stream was applied into the idle period, during the machining process. This procedure aimed to minimize the T factor. This technique was applied using three values of temperature from the hot air stream (100, 350 e 580 oC) with no cutting fluid (dry condition) and with cutting fluid mist (wet condition) using the hot air stream at 580oC. Besides, trials at room temperature were carried out. Afterwards the inserts were analyzed using a scanning electron microscope, where the quantity of thermal cracks generated in each condition, the wear and others damages was analyzed. In a general way, it was found that the heating of the idle period was positive for reducing the number of thermal cracks during face milling with cemented carbide inserts. Further, the cutting fluid mist application was effective in reducing the wear of the cutting tools.

Mecanismos de desgaste de poliuretano em ensaios de microabrasão

Wear mechanisms and thermal history of two non-conforming sliding surfaces was investigated in laboratory. A micro-abrasion testing setup was used but the traditional rotative sphere method was substituted by a cylindrical surface of revolution which included seven sharp angles varying between 15o to 180o. The micro-abrasion tests lead to the investigation on the polyurethane response at different contact pressures. For these turned counterfaces with and without heat treatment. Normal load and sliding speeds were changed. The sliding distance was fixed at 5 km in each test. The room and contact temperatures were measured during the tests. The polyurethane was characterized using tensile testing, hardness Shore A measurement, Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC) and Thermomechanical Analyze (TMA). The Vickers micro-hardness of the steel was measured before and after the heat treatment and the metallographic characterization was also carried out. Worn surface of polyurethane was analysed using Scanning Electron Microscope (SEM) and EDS (Electron Diffraction Scanning) microanalyses. Single pass scratch testing in polyurethane using indenters with different contact angles was also carried out. The scar morphology of the wear, the wear mechanism and the thermal response were analyzed in order to correlate the conditions imposed by the pressure-velocity pair to the materials in contact. Eight different wear mechanisms were identified on the polyurethane surface. It was found correlation between the temperature variation and the wear scar morphology.

Estudo da influência de compostos recalcitrantes na remoção de matéria orgânica biodegradável no tratamento de efluente de refinarias de petróleo

Petroleum Refinery wastewaters (PRW) have hart-to-degrade compounds, such as: phenols, ammonia, cyanides, sulfides, oils and greases and the mono and polynuclear aromatic hydrocarbons: benzene, toluene and xylene (BTX), acenaphthene, nitrobenzene and naphtalene. It is known that the microrganisms activity can be reduced in the presence of certain substances, adversely affecting the biological process of wastewater treatment. This research was instigated due the small number of studies regarding to this specific topic in the avaiable literature. This body of work ims to evaluate the effect of toxic substances on the biodegradability of the organic material found in PRW. Glucose was chosen as the model substrate due to its biodegradable nature. This study was divided into three parts: i) a survey of recalcitants compounds and the removal of phenol by using both biological and photochemical-biological processes; ii) biomass aclimation and iii) evaluation of the inhibitory effect certain compounds have on glucose biodegradation. The phenol degradation experiments were carried out in an activity sludge system and in a photochemical reactor. The results showed the photochemical-biological process to be more effective on phenol degradation, suggesting the superioruty of a combined photochemical-biological treatment when compared with a simple biological process for phenol removal from industry wastewaters. For the acclimation step, was used an activated sludge from industrial wastewaters. A rapid biomass aclimation to a synthetic solution composed of the main inhibitory compouns fpund in a PRW was obtained using the following operation condition: (pH = 7,0; DO ≥ 2,0 mg/L; RS = 20 days e qH = 31,2 and 20,4 hours), The last part was consisted of using respirometry evaluation toxicity effects of selected compounds over oxygen uptake rate to adaptated and non adaptated biomass in the presence of inhibitory compounds. The adaptated sludge showed greater degration capacity, with lower sensibility to toxic effects. The respirometry has proved to be very practical, as the techiniques used were simple and rapid, such as: Chemical Oxygen Demand (COD), Dissolved Oxygen (DO), and Volatile Suspended Solids (VSS). Using the latter it is possible to perform sludge selection to beggingthe process; thus allowing its use for aerobic treatment system`s behacior prediction

Análise da adição de resíduo oriundo do tratamento de esgotos em massa cerâmica utilizada para fabricação de telhas

Sludge of Wastewater Treatment Plants (WTPs) disposal is a problem for any municipality, for this reason the amount of sludge production is now a key issue in selecting treatment methods. It is necessary to investigate new applications for this waste type, due to the restrictions imposed by the environmental organs. The raw materials used in the Red Ceramic, are generally very heterogeneous, for this reason, such materials can tolerate the presence of different types of wastes. In Rio Grande do Norte, the roof tiles production corresponds to 60,61% from the total of ceramic units produced. Due to the importance of the ceramic industry of roof tiles for the state, allied to the environmental problem of the sludge disposal, this work had for objective to verify the possibility of the incorporation of sewage sludge in ceramic body used for production of roof tiles. In the research, sludge originating from drying beds of WTP of the Central Campus from UFRN and clays originating from a ceramic industry from Goianinha/RN were used. The raw materials were characterized by techniques of: analysis of particles distribution by diffraction to laser; real density; consistence limits; chemical analysis by X-ray fluorescence; mineralogical analysis by X-ray diffraction; organic matter; and solids content. Five batches of roof tiles were manufactured in the approximate dosages of 2%, 4%, 6%, 8% and 10%. To evaluate the properties of each final product, tests of water absorption, impermeability, bending strength, leachability and solubility were accomplished. The roof tiles manufactured with sludge presented characteristics similar to the roof tiles without sludge in relation to the environmental risk. The results showed that it is possible to use approximately up to 4% of sludge in ceramic bodies for production of roof tiles. However, it is observed that the high amount of organic matter (71%) present in the sludge is shown as factor that limits the sludge incorporation in ceramic bodies, worsening the quality of the roof tiles. It is necessary the use of mixtures of different raw materials under point of view of the granulometry and of the other chemical and mineralogical properties for the obtaining of a satisfactory mass to the production of ceramic roof tiles