Emergence and Fate of Siloxanes in Waste Streams: Release Mechanisms, Partitioning and Persistence in Three Environmental Compartments

Siloxanes are widely used in personal care and industrial products due to their low surface tension, thermal stability, antimicrobial and hydrophobic properties, among other characteristics. Volatile methyl siloxanes (VMS) have been detected both in landfill gas and biogas from anaerobic digesters at wastewater treatment plants. As a result, they are released to gas phase during waste decomposition and wastewater treatment. During transformation processes of digester or landfill gas to energy, siloxanes are converted to silicon oxides, leaving abrasive deposits on engine components. These deposits cause increased maintenance costs and in some cases complete engine overhauls become necessary. The objectives of this study were to compare the VMS types and levels present in biogas generated in the anaerobic digesters and landfills and evaluate the energetics of siloxane transformations under anaerobic conditions. Siloxane emissions, resulting from disposal of silicone-based materials, are expected to increase by 29% within the next 10 years. Estimated concentrations and the risk factors of exposure to siloxanes were evaluated based on the initial concentrations, partitioning characteristics and persistence. It was determined that D4 has the highest risk factor associated to bioaccumulation in liquid and solid phase, whereas D5 was highest in gas phase. Additionally, as siloxanes are combusted, the particle size range causes them to be potentially hazardous to human health. When inhaled, they may affix onto the alveoli of the lungs and may lead to development of silicosis. Siloxane-based COD-loading was evaluated and determined to be an insignificant factor concerning COD limits in wastewater. Removal of siloxane compounds is recommended prior to land application of biosolids or combustion of biogas. A comparison of estimated costs was made between maintenance practices for removal of siloxane deposits and installation/operation of fixed-bed carbon absorption systems. In the majority of cases, the installation of fixed-bed adsorption systems would not be a feasible option for the sole purpose of siloxane removal. However they may be utilized to remove additional compounds simultaneously.

The effects and extent of 1,1,1-trichloroethane vapor concentration exposure on workers during solvent vapor degreasing

This study attempted to determine if an excessive amount of 1,1,1 - Trichloroethane was released into the air, the acute effects of exposure and the cause(s) of excessive use. The types of degreasing equipments which were tested in this study are straight vapor and the vapor spray machines. The instruments utilized to obtain the data for this study are Gastech Haline Detector, Organic Vapor Monitor Badge and Personal Sampling Pump. Readings were taken on three different tanks. The data accumulated by this study were obtained during actual cleaning operation. During testing, increased exposure was detected due to exceeding the rate of removal, downward drafts were blowing right over the top of a degreaser and, in some cases, poor general ventilation caused solvent vapor to be blown out of the tank and into the workers' breathing zone, affecting excessive vapor drag out and solvent loss. The results show that, since the characteristics of solvent 1,1,1 - Trichloroethane are well suited to vapor degreasing requirements, by using proper procedures and maintenance, 1,1,1 - Trichloroethane emission during vapor degreasing can be controlled at levels well below the industrial hygiene standard established by OSHA for safe and healthful conditions.

Quantifying confinement effects in ice impact loads

Ships and offshore structures, that encounter ice floes, tend to experience loads with varying pressure distributions within the contact patch. The effect of the surrounding ice adjacent to that which is involved in the contact zone has an influence on the effective strength. This effect has come to be called confinement. A methodology for quantifying ice sample confinement is developed, and the confinement is defined using two non-dimensional terms; a ratio of geometries and an angle. Together these terms are used to modify force predictions that account for increased fracturing and spalling at lower confinement levels. Data developed through laboratory experimentation is studied using dimensional analysis. The characteristics of dimensional analysis allow for easy comparison between many different load cases; provided the impact scenario is consistent. In all, a methodology is developed for analyzing ice impact testing considering confinement effects on force levels, with the potential for extrapolating these tests to full size collision events.

Distribution network reconfiguration validation with uncertain loads - network configuration determination and application

Automatic load transfer (ALT) on the 11 kV network is the process by which circuit breakers on the network are switched to form open points in order to feed load from different primary substations. Some of the potential benefits that may be gained from dynamically using ALT include maximising utilisation of existing assets, voltage regulation and reduced losses. One of the key issues, that has yet to be properly addressed in published research, is how to validate that the modelled benefits really exist. On an 11 kV distribution network where the load is continually changing and the load on each distribution substation is unlikely to be monitored - reduction in losses from moving the normally open point is particularly difficult to prove. This study proposes a method to overcome this problem and uses measured primary feeder data from two parts of the Western Power Distribution 11 kV Network under different configurations. The process of choosing the different configurations is based on a heuristic modelling method of locating minimum voltages to help reduce losses.

Team reflexivity and innovation:the moderating role of team context

We developed and tested a team level contingency model of innovation, integrating theories regarding work demands, team reflexivity - the extent to which teams collectively reflect upon their working methods and functioning -, and team innovation. We argued that highly reflexive teams will be more innovative than teams low in reflexivity when facing a demanding work environment. The relationships between team reflexivity, a demanding work environment (i.e. quality of the physical work environment and work load) and team innovation was examined among 98 primary health care teams (PHCTs) in the UK, comprised of 1137 individuals. Results showed that team reflexivity is positively related to team innovation, and that there is an interaction between team reflexivity, team level workload, and team innovation, such that when team level workload is high, combined with a high level of team reflexivity, team innovation is also higher. The complementary interaction between team reflexivity, quality of physical work environment, and team innovation, showed that when the quality of the work environment is low, combined with a high level of team reflexivity, team innovation was also higher. These results are discussed in the context of the need for team reflexivity and team innovation among teams at work facing high work demands.

Effect of road quality in structural health monitoring under operational conditions

The effect of unevenness in a bridge deck for the purpose of Structural Health Monitoring (SHM) under operational conditions is studied in this paper. The moving vehicle is modelled as a single degree of freedom system traversing the damaged beam at a constant speed. The bridge is modelled as an Euler-Bernoulli beam with a breathing crack, simply supported at both ends. The breathing crack is treated as a nonlinear system with bilinear stiffness characteristics related to the opening and closing of crack. The unevenness in the bridge deck considered is modelled using road classification according to ISO 8606:1995(E). Numerical simulations are conducted considering the effects of changing road surface classes from class A - very good to class E - very poor. Cumulant based statistical parameters, based on a new algorithm are computed on stochastic responses of the damaged beam due to passages of the load in order to calibrate the damage. Possibilities of damage detection and calibration under benchmarked and non-benchmarked cases are considered. The findings of this paper are important for establishing the expectations from different types of road roughness on a bridge for damage detection purposes using bridge-vehicle interaction where the bridge does not need to be closed for monitoring.

Effects of vehicle speed in structural health monitoring from operational conditions of bridges

The effects of vehicle speed for Structural Health Monitoring (SHM) of bridges under operational conditions are studied in this paper. The moving vehicle is modelled as a single degree oscillator traversing a damaged beam at a constant speed. The bridge is modelled as simply supported Euler-Bernoulli beam with a breathing crack. The breathing crack is treated as a nonlinear system with bilinear stiffness characteristics related to the opening and closing of crack. The unevenness of the bridge deck is modelled using road classification according to ISO 8606:1995(E). The stochastic description of the unevenness of the road surface is used as an aid to monitor the health of the structure in its operational condition. Numerical simulations are conducted considering the effects of changing vehicle speed with regards to cumulant based statistical damage detection parameters. The detection and calibration of damage at different levels is based on an algorithm dependent on responses of the damaged beam due to passages of the load. Possibilities of damage detection and calibration under benchmarked and non-benchmarked cases are considered. Sensitivity of calibration values is studied. The findings of this paper are important for establishing the expectations from different vehicle speeds on a bridge for damage detection purposes using bridge-vehicle interaction where the bridge does not need to be closed for monitoring. The identification of bunching of these speed ranges provides guidelines for using the methodology developed in the paper.

Stable carbon and oxygen isotope ratios of benthic and planktonic foraminifera of ODP Hole 171-1049C

Ocean anoxic events were periods of high carbon burial that led to drawdown of atmospheric carbon dioxide, lowering of bottom-water oxygen concentrations and, in many cases, significant biological extinction (Arthur et al., 1990; Erbacher et al., 1996, doi:10.1130/0091-7613(1996)024<0499:EPORAO>2.3.CO;2; Kuypers et al., 1999, doi:10.1038/20659; Jenkyns, 1997; Hochuli et al., 1999, doi:10.1130/0091-7613(1999)027<0657:EOHPAC>2.3.CO;2). Most ocean anoxic events are thought to be caused by high productivity and export of carbon from surface waters which is then preserved in organic-rich sediments, known as black shales. But the factors that triggered some of these events remain uncertain. Here we present stable isotope data from a mid-Cretaceous ocean anoxic event that occurred 112 Myr ago, and that point to increased thermohaline stratification as the probable cause. Ocean anoxic event 1b is associated with an increase in surface-water temperatures and runoff that led to decreased bottom-water formation and elevated carbon burial in the restricted basins of the western Tethys and North Atlantic. This event is in many ways similar to that which led to the more recent Plio-Pleistocene Mediterranean sapropels, but the greater geographical extent and longer duration (~46 kyr) of ocean anoxic event 1b suggest that processes leading to such ocean anoxic events in the North Atlantic and western Tethys were able to act over a much larger region, and sequester far more carbon, than any of the Quaternary sapropels.

Gas, water and volume characteristics during controlled degassing experiments on ODP Leg 164 PCS cores

A pressurized core with CH4 hydrate or dissolved CH4 should evolve gas volumes in a predictable manner as pressure is released over time at isothermal conditions. Incremental gas volumes were collected as pressure was released over time from 29 pressure core sampler (PCS) cores from Sites 994, 995, 996, and 997 on the Blake Ridge. Most of these cores were kept at or near 0ºC with an ice bath, and many of these cores yielded substantial quantities of CH4. Volume-pressure plots were constructed for 20 of these cores. Only five plots conform to expected volume and pressure changes for sediment cores with CH4 hydrate under initial pressure and temperature conditions. However, other evidence suggests that sediment in these five and at least five other PCS cores contained CH4 hydrate before core recovery and gas release. Detection of CH4 hydrate in a pressurized sediment core through volume-pressure relationships is complicated by two factors. First, significant quantities of CH4-poor borehole water fill the PCS and come into contact with the core. This leads to dilution of CH4 concentration in interstitial water and, in many cases, decomposition of CH4 hydrate before a degassing experiment begins. Second, degassing experiments were conducted after the PCS had equilibrated in an ice-water bath (0ºC). This temperature is significantly lower than in situ values in the sediment formation before core recovery. Our results and interpretations for PCS cores collected on Leg 164 imply that pressurized containers formerly used by the Deep Sea Drilling Project (DSDP) and currently used by ODP are not appropriately designed for direct detection of gas hydrate in sediment at in situ conditions through volume-pressure relationships.

Seawater carbonate chemistry and community calcification during Reunion Island coral reef community study, 2007

To assess the contribution of soft-bottoms to the carbon cycle in coral reefs, the net community production (p) was measured in winter at 3 stations on La Saline inner reef flat (Reunion Island). Changes in pH and total alkalinity at different irradiances (I) were assessed using benthic chambers (0.2 m2) during a 1-h incubation. Mean grain size, the silt and clay load and chlorophyll a content of the sediments were analysed in each chamber. Daily community production (P), gross community production (Pg) and community respiration (R) were estimated from p-I curves and daily irradiance variations (PAR, 400-700 nm). Sediment characteristics and chlorophyll a contents did not differ between the three sites, except for the silt and clay fraction at one station. R being higher than Pg (84.88 ± 7.36 and -62.29 ± 3.34 mmolC m-2 d-1 respectively), P value reached 22.59 ± 5.66 mmolC m-2 d-1. The sediments were therefore heterotrophic with a mean Pg/R lower than 1 (0.74 ± 0.05) and appear to be a carbon source. Our data suggested the importance of the degradation process in the functioning of near-reef sediments.

Low cost carriers and the changing fortunes of airports in the UK

This paper investigates how low cost carrier (LCC) developments have affected the traffic and financial performance of UK airports from 2002 to 2014. Considerable growth in traffic was experienced from 2002 to 2007, especially at regional airports as a result of LCC expansion. This was replaced with a more volatile period from 2008 to 2014 where many of the regional airports that experienced the greatest increases in traffic during the early years, then experienced the largest reductions. This has clearly had an impact on their financial well-being, resulting in reduced profits for many airports. It has also meant that many regional airports that seemed like attractive investments as a result of LCC expansion are now less financially appealing, especially given that the LCC sector in the UK appears to be shifting capacity to larger regional airports, and in some cases, London airports.

Minorities, Measured Cognitive Skills and the Earnings of Canadians (Working Paper 26)

This paper uses the Statistics Canada Survey of Literacy Skills in Daily Use (LSUDA) to investigate minority-“white”(i.e., non-minority) income differences and the role education and English/French literacy and numeracy skills play in those patterns. There are three principal sets of findings. First, among males, some visible minority groups have substantially lower levels of the measured language and number skills than whites and other more economically successful minorities, and in some cases these differences play a significant role in explaining the observed income patterns. The minority-white income gaps are, however, much smaller for women, and the literacy and numeracy variables do not have much of a role to play in explaining those differences. Second, for men, the minority-white income gaps are largely confined to immigrants, and there are no significant differences amongst the native-born once various factors which affect incomes (including education and the literacy and numeracy measures) are taken into account. For women, though, minority-white income differences only emerge for certain Canadian-born groups when they are differentiated from immigrants, for whom different gaps become apparent. Finally, the measured returns to literacy and numeracy differ significantly by ethnic group and sex. Various implications of the findings are discussed.

Brazilian Social Segurity and Social Work: reflections on the Continuous Cash Benefit Programme

Guaranteed under the Federal Constitution of 1988, Brazilian social security covers rights relating to health, social welfare and social care. The Continuous Cash Benefit Programme (BPC) was approved as part of social care policy and is regulated under the Social Care Act (Ley Orgánica de Asistencia Social) of 1993. This benefit guarantees a minimum monthly income for persons with disabilities and for older adults. Certain requirements must be satisfied in order to obtain the assistance: medical and social assessment of disabled persons, a minimum age of 65 years for older adults, and, in both cases, the value of per capita income for the nuclear family in question, which must be lower than a quarter of the minimum wage. Regulation of the BPC has incorporated advances and setbacks in terms of legislation and implementation. In this framework, this article presents a theoretical reflection, an analysis of the legislation on the matter, and some reflections on the challenges that it poses for social workers.

The prognostic impact of clinical and molecular features in hairy cell leukaemia variant and splenic marginal zone lymphoma.

Hairy cell leukaemia variant (HCL-variant) and splenic marginal zone lymphoma (SMZL) are disorders with overlapping features. We investigated the prognostic impact in these disorders of clinical and molecular features including IGH VDJ rearrangements, IGHV gene usage and TP 53 mutations. Clinical and laboratory data were collected before therapy from 35 HCL-variant and 68 SMZL cases. End-points were the need for treatment and overall survival. 97% of HCL-variant and 77% of SMZL cases required treatment (P = 0·009). Survival at 5 years was significantly worse in HCL-variant [57% (95% confidence interval 38-73%)] compared with SMZL [84% (71-91%); Hazard Ratio 2·25 (1·20-4·25), P = 0·01]. In HCL-variant, adverse prognostic factors for survival were older age (P = 0·04), anaemia (P = 0·01) and TP 53 mutations (P = 0·02). In SMZL, splenomegaly, anaemia and IGHV genes with >98% homology to the germline predicted the need for treatment; older age, anaemia and IGHV unmutated genes (100% homology) predicted shorter survival. IGHV gene usage had no impact on clinical outcome in either disease. The combination of unfavourable factors allowed patients to be stratified into risk groups with significant differences in survival. Although HCL-variant and SMZL share some features, they have different outcomes, influenced by clinical and biological factors.

Molecular characterization of complete and incomplete immunoglobulin heavy chain gene rearrangements in hairy cell leukemia.

PURPOSE: We analyzed patients with hairy cell leukemia (HCL) to achieve a better understanding of the differentiation stage reached by HCL cells and to define the key role of the diversification of cell surface makers, especially CD25 expression. PATIENTS AND METHODS: We analyzed 38 previously untreated patients with HCL to characterize their complete (VDJ(H)) and incomplete (DJ(H)) immunoglobulin (Ig) heavy chain (IgH) rearrangements, including somatic hypermutation pattern and gene segment use. RESULTS: A correlation between immunophenotypic profile and molecular data was seen. All 38 cases showed monoclonal amplifications: VDJ(H) in 97%, DJ(H) in 42%, and both in 39%. Segments from the D(H)3 family were used more in complete compared with incomplete rearrangements (45% vs. 12%; P <.005). Furthermore, comparison between molecular and immunophenotypic characteristics disclosed differences in the expression of CD25 antigen; CD25(-) cases, a phenotype associated with HCL variant, showed complete homology to the germline in 3 of 5 cases (60%), whereas this characteristic was never observed in CD25(+) cases (P <.005). Moreover, V(H)4-34, V(H)1-08, and J(H)3 segments appeared in 2, 1, and 2 CD25(-) cases, respectively, whereas they were absent in all CD25(+) cases. CONCLUSION: These results support that HCL is a heterogeneous entity including subgroups with different molecular characteristics, which reinforces the need for additional studies with a larger number of patients to clarify the real role of gene rearrangements in HCL.