Suurlujuusterästen hitsausliitoksen muutosvyöhykkeen metallurgiset muutokset

Tässä kandidaatintyössä käsitellään suurlujuusteräksiä ja niiden hitsausta, keskittyen varsinkin hitsauksessa perusaineeseen syntyvään muutosvyöhykkeeseen. Työn alkuosio on suoritettu kirjallisuustutkimuksena ja siinä käydään läpi yleisesti suurlujuusterästen määrittelyä, valmistustapoja, hitsausta ja hitsaukseen liittyviä erityisnäkökohtia. Työn loppuosassa on tutustuttu suurlujuusteräksiä hitsattaessa syntyvään muutosvyöhykkeeseen koehitsien avulla. Suurlujuusteräksille ei ole luotu yleistä standardisoitua määrittelyasteikkoa, mutta teräksiä aletaan usein pitämään suurlujuusteräksinä kun niiden myötöraja ylittään 460–550 MPa. Tällaisia teräksiä voidaan valmistaa pääasiassa joko nuorruttamalla, termomekaanisesti valssaamalla tai suorakarkaisemalla. Valmistustavalla on suuri vaikutus teräksen hitsattavuuteen. Nuorrutetuille teräksille hitsattaessa muodostuvan muutosvyöhykkeen karkearakeisen osion raekoko voi kasvaa huomattavasti varsinkin suurempia lämmöntuonteja käytettäessä ja täten aiheuttaa merkittävääkin kovuuden kasvua, kuten myös tämän kandidaatintyön koehitseissä havaittiin. Termomekaanisesti valmistetuilla teräksillä ei vastaavanlaista kovuuden kasvua yleensä ilmene. Valmistustavasta riippumatta suurlujuusterästen mekaaniset ominaisuudet vaikuttaisivat heikentyvän kyseisellä vyöhykkeellä suurempia lämmöntuonteja käytettäessä. Suurlujuusterästen hitsausliitosten laatua pyritäänkin parantamaan jatkuvasti esimerkiksi kehittämällä materiaaleista paremmin hitsattavia ja hitsausprosesseista paremmin suurlujuusteräksien erityistarpeita huomioivia.

Energy Efficiency in Electrical Drive Systems: Technical potentials, barriers and policy approaches for small and medium industries in Ghana

Today industries and commerce in Ghana are facing enormous energy challenge. The pressure is on for industries to reduce energy consumption, lower carbon emissions and provide se-cured power supply. Industrial electric motor energy efficiency improvement is one of the most important tools to reduce global warming threat and reduce electricity bills. In order to develop a strategic industrial energy efficiency policy, it is therefore necessary to study the barriers that inhibit the implementation of cost – effective energy efficiency measures and the driving forces that promote the implementation. The aim of this thesis is to analyse the energy consumption pattern of electric motors, study factors that promote or inhibit energy efficiency improvements in EMDS and provide cost – effective solutions that improve energy efficiency to bridge the existing energy efficiency gap in the surveyed industries. The results from this thesis has revealed that, the existence of low energy efficiency in motor-driven systems in the surveyed industries were due to poor maintenance practices, absence of standards, power quality issues, lack of access to capital and limited awareness to the im-portance of energy efficiency improvements in EMDS. However, based on the results pre-sented in this thesis, a policy approach towards industrial SMEs should primarily include dis-counted or free energy audit in providing the industries with the necessary information on potential energy efficiency measures, practice best motor management programmes and estab-lish a minimum energy performance standard (MEPS) for motors imported into the country. The thesis has also shown that education and capacity development programmes, financial incentives and system optimization are effective means to promote energy efficiency in elec-tric motor – driven systems in industrial SMEs in Ghana

Development of a New Welding Product Quality Control and Management System Model for China

The Chinese welding industry is growing every year due to rapid development of the Chinese economy. Increasingly, companies around the world are looking to use Chinese enterprises as their cooperation partners. However, the Chinese welding industry also has its weaknesses, such as relatively low quality and weak management. A modern, advanced welding management system appropriate for local socio-economic conditions is required to enable Chinese enterprises to enhance further their business development. The thesis researches the design and implementation of a new welding quality management system for China. This new system is called ‗welding production quality control management model in China‘ (WQMC). Constructed on the basis of analysis of a survey and in-company interviews, the welding management system comprises the following different elements and perspectives: a ‗Localized congenital existing problem resolution strategies‘ (LCEPRS) database, a ‗human factor designed training system‘ (HFDT) training strategy, the theory of modular design, ISO 3834 requirements, total welding management (TWM), and lean manufacturing (LEAN) theory. The methods used in the research are literature review, questionnaires, interviews, and the author‘s model design experiences and observations, i.e. the approach is primarily qualitative and phenomenological. The thesis describes the design and implementation of a HFDT strategy in Chinese welding companies. Such training is an effective way to increase employees‘ awareness of quality and issues associated with quality assurance. The study identified widely existing problems in the Chinese welding industry and constructed a LCEPRS database that can be used in efforts to mitigate and avoid common problems. The work uses the theory of modular design, TWM and LEAN as tools for the implementation of the WQMC system.

Controlling full penetration in MAG welding by the application of infrared thermography and neural network

In this study, an infrared thermography based sensor was studied with regard to usability and the accuracy of sensor data as a weld penetration signal in gas metal arc welding. The object of the study was to evaluate a specific sensor type which measures thermography from solidified weld surface. The purpose of the study was to provide expert data for developing a sensor system in adaptive metal active gas (MAG) welding. Welding experiments with considered process variables and recorded thermal profiles were saved to a database for further analysis. To perform the analysis within a reasonable amount of experiments, the process parameter variables were gradually altered by at least 10 %. Later, the effects of process variables on weld penetration and thermography itself were considered. SFS-EN ISO 5817 standard (2014) was applied for classifying the quality of the experiments. As a final step, a neural network was taught based on the experiments. The experiments show that the studied thermography sensor and the neural network can be used for controlling full penetration though they have minor limitations, which are presented in results and discussion. The results are consistent with previous studies and experiments found in the literature.

Investigation into the determination of arsenic by direct current plasma atomic emission spectrometer

Improvements have been made on the currently available hydride generator system manufactured by SpectraMetrics Incorporated, because the system was found to be unsatisfactory with respect to the following: 1. the drying agent, anhydrous calcium chloride, 2. the special sample tube, 3. the direction of argon flow through the Buchner funnel when it came to dealing with real sample, that is, with reference only to aqueous extracts of soil samples. Changes that were made on the system included the replacement of anhydrous calcium chloride with anhydrous calcium sulphate and the replacement of the special sample tube with a modified one made from silica. Re-directing the flow of argon through the top of the Buchner funnel appeared to make the system compatible with aqueous extracts of soil samples. The interferences from 1000 ~g/mL of nickel(II) , cobalt(II), iron(III), copper(II) have been eliminated with the aid of 1.4 M hydrochloric acid and 1% (weight/volume) L-cystine. Greater than 90% recovery of 0.3 ~g/mL arsenic signal was achieved in each case. Furthermore, 103% of arsenic signal was accomplished in the presence of 1000 ~g/mL cadmium with 5 M Hel. tVhen each of the interferents was present in solution at 1000 ppm, a recovery of 85% was achieved by using 5 M hydrochloric acid and 3% (weight/volume) L-cystine. Without L-cystine and when 1.4 M hydrochloric acid was used, the recoveries were 0% (Ni), 0% (Co), 88% (Fe), 15% (Cu), 18% (Cd). Similarly, a solution containing 1000 ppm of each interferent gave a zero percent recovery of arsenic. The reduction of trivalent and pentavalent arsenic at a pH less than one has also been investigated and shown to be quantitative if peak areas are measured. The reproducibility determination of a 0.3 Vg/mL standard arsenic solution by hydride generation shows a relative standard deviation of 3.4%. The detection limits with and without Porapak Q have been found to be 0.6 ng/mL and 1.0 ng/mL, respectively.

The effect of social skills training on grade 3 students' self-esteem, moral development and perceptions of classroom environment

Two Grade 3 classes were used to study the effects of a formal social skills training program. Specifically, comparisons were made on self-esteem, classroom environment, and moral development to see whether changes occurred as a direct result of social skills training. One group participated in the social skills program, while the other group did not. It was hypothesized that formal social skills training would improve students' selfesteem, moral development, and the classroom environment. At the end of the program, however, data from class observations, teacher interviews, journal of the social skills training group teacher, and measures of self-esteem, classroom environment and moral development did not support this hypothesis. Although the social skills training group scored significantly higher in class cohesiveness, they did not show marked improvement in the other measures. In fact, in some measures (e.g., friction and competitiveness), they demonstrated greater scores at both pretest and posttests. The social skills training group was, however, able to vocalize and utilize the strategies of several skills which had been a focus of the program, suggesting that formal social skills training is a useful tool for presenting and reinforcing some specific behaviours.

Transfection of newt blastema mesenchyme using the techniques of lipofection and direct gene transfer

The regenerating amphibian limb provides a useful system for studying genes involved in the establishment of positional information. While a number of candidate genes that may playa role in pattern formation have been identified, their function in vivo is unknown in this system. To better ascertain the role of these genes, it would be useful to be able to alter their normal patterns of expression in vivo and to assess the effects of this misexpression on limb pattern. In order to achieve this, a method of introducing a plasmid containing the eDNA of a gene of interest into a newt blastema (a growth zone of mesenchymal progenitor cells) is needed. Unfortunately, most commonly used transfection techniques cannot be used with newt blastema cells. In this study, I have used the techniques of lipofection and direct gene transfer to introduce plasmid DNA containing reporter genes into the cells of a regenerating newt limb. The technique of lipofection was most effective when the blastema cells were transfected in vitro. The optimal ratio for transfection was shown to be 1:3 DNA:Lipofectin (W/w) , and an increase in the amount of DNA present in the mixture (1:3 ratio maintained) resulted in a corresponding increase in gene expression. The technique of direct gene transfer was used to transfect newt blastema cells with and without prior complex formation with Lipofectin. Injection of plasmid DNA alone provided the most 3 promising results. It was possible to introduce plasmid DNA containing the reporter gene ~-galactosidase and achieve significant gene expression in cells associated with the injection site. In the future, it would be interesting to use this technique to inject plasmid DNA containing a gene which may have a role in pattern formation into specific areas of the newt blastema and to analyze the resulting limb pattern that emerges.

Rotational analysis of the 5 1 0 6 1 0 band of formyl chloride

Please consult the paper edition of this thesis to read. It is available on the 5th Floor of the Library at Call Number: Z 9999 C54 L434 1989

Determining rotational direction of rotation structures using prolate shaped grains within till

Micromorphology is used to analyze a wide range of sediments. Many microstructures have, as yet, not been analyzed. Rotation structures are the least understood of microstructures: their origin and development forms the basis of this thesis. Direction of rotational movement helps understand formative deformational and depositional processes. Twenty-eight rotation structures were analyzed through two methods of data extraction: (a) angle of grain rotation measured from Nikon NIS software, and (b) visual analyses of grain orientation, neighbouring grainstacks, lineations, and obstructions. Data indicates antithetic rotation is promoted by lubrication, accounting for 79% of counter-clockwise rotation structures while 21 % had clockwise rotation. Rotation structures are formed due to velocity gradients in sediment. Subglacial sediments are sheared due to overlying ice mass stresses. The grains in the sediment are differentially deformed. Research suggests rotation structures are formed under ductile conditions under low shear, low water content, and grain numbers inducing grain-to-grain interaction.

Photograph - Baie Comeau, welding railway line

A photograph of men working to weld the railway line at Baie Comeau. The caption reads, "Welding railway line as rails joined immediately behind the temporary staff house".