Investigations of superconducting bismuth cuprates of the general formula Bi2-xPbx(Ca,Sr,Y)n 1 Cun O2n 4 δ

In the (Bi,Pb)-Sr-Cu-O system we have examined many compositions which are either metallic or semiconducting. In the Bi2-xPbx(Ca, Sr)n+1 Cun O2n+4+δ system, we have established the superconducting properties of the n = 1 to 4 members. The Tc increases from n = 1 to 3 and does not increase further when n = 4. In Bi2Ca1-x,YxSr2Cu2Oy, the Tc decreases with increase in x.

Anomalous behavior of hydrodynamic modes in the two dimensional shear flow of a granular material

The growth rates of the hydrodynamic modes in the homogeneous sheared state of a granular material are determined by solving the Boltzmann equation. The steady velocity distribution is considered to be the product of the Maxwell Boltzmann distribution and a Hermite polynomial expansion in the velocity components; this form is inserted into them Boltzmann equation and solved to obtain the coeificients of the terms in the expansion. The solution is obtained using an expansion in the parameter epsilon =(1 - e)(1/2), and terms correct to epsilon(4) are retained to obtain an approximate solution; the error due to the neglect of higher terms is estimated at about 5% for e = 0.7. A small perturbation is placed on the distribution function in the form of a Hermite polynomial expansion for the velocity variations and a Fourier expansion in the spatial coordinates: this is inserted into the Boltzmann equation and the growth rate of the Fourier modes is determined. It is found that in the hydrodynamic limit, the growth rates of the hydrodynamic modes in the flow direction have unusual characteristics. The growth rate of the momentum diffusion mode is positive, indicating that density variations are unstable in the limit k--> 0, and the growth rate increases proportional to kslash} k kslash}(2/3) in the limit k --> 0 (in contrast to the k(2) increase in elastic systems), where k is the wave vector in the flow direction. The real and imaginary parts of the growth rate corresponding to the propagating also increase proportional to kslash k kslash(2/3) (in contrast to the k(2) and k increase in elastic systems). The energy mode is damped due to inelastic collisions between particles. The scaling of the growth rates of the hydrodynamic modes with the wave vector I in the gradient direction is similar to that in elastic systems. (C) 2000 Elsevier Science B.V. All rights reserved.

Positional dependence of material flow in friction stir welding: analysis of joint line remnant and its relevance to dissimilar metal welding

Understanding material flow in friction stir welding is important for production of sound dissimilar metal welding that control the intermixing of two alloys being welded and consequent formation of new constituents which influences the weld properties. In the present experimental investigation material flow patterns are visualised using dissimilar and similar aluminium alloys using a simple innovative ,experiment. The experimental results reveal that only a portion of material transported from the leading edge undergoes chaotic flow and the remaining is deposited systematically in the trailing edge of the weld. Using this information it is shown that the formation of a friction stir welding defect, joint line remnant, does not occur only when the weld interface is on the advancing side. The material flow visualisation study has been utilised to analyse the mechanism of weld formation and its usefulness in improving fatigue properties and for dissimilar metal welds.

The Shannon Cipher System with a Guessing Wiretapper: General Sources

The Shannon cipher system is studied in the context of general sources using a notion of computational secrecy introduced by Merhav & Arikan. Bounds are derived on limiting exponents of guessing moments for general sources. The bounds are shown to be tight for iid, Markov, and unifilar sources, thus recovering some known results. A close relationship between error exponents and correct decoding exponents formfixed rate source compression on the one hand and exponents for guessing moments on the other hand is established.

A general thermodynamic framework for understanding the behaviour of absorption chillers

In this article, a general definition of the process average temperature has been developed, and the impact of the various dissipative mechanisms on 1/COP of the chiller evaluated. The present component-by-component black box analysis removes the assumptions regarding the generator outlet temperature(s) and the component effective thermal conductances. Mass transfer resistance is also incorporated into the absorber analysis to arrive at a more realistic upper limit to the cooling capacity. Finally, the theoretical foundation for the absorption chiller T-s diagram is derived. This diagrammatic approach only requires the inlet and outlet conditions of the chiller components and can be employed as a practical tool for system analysis and comparison. (C) 2000 Elsevier Science Ltd and IIR. All rights reserved.

The Proto-Lucianic Problem in 1 Samuel

The Lucianic text of the Septuagint of the Historical Books witnessed primarily by the manuscript group L (19, 82, 93, 108, and 127) consists of at least two strata: the recensional elements, which date back to about 300 C.E., and the substratum under these recensional elements, the proto-Lucianic text. Some distinctive readings in L seem to be supported by witnesses that antedate the supposed time of the recension. These witnesses include the biblical quotations of Josephus, Hippolytus, Irenaeus, Tertullian, and Cyprian, and the Old Latin translation of the Septuagint. It has also been posited that some Lucianic readings might go back to Hebrew readings that are not found in the Masoretic text but appear in the Qumran biblical texts. This phenomenon constitutes the proto-Lucianic problem. In chapter 1 the proto-Lucianic problem and its research history are introduced. Josephus references to 1 Samuel are analyzed in chapter 2. His agreements with L are few and are mostly only apparent or, at best, coincidental. In chapters 3 6 the quotations by four early Church Fathers are analyzed. Hippolytus Septuagint text is extremely hard to establish since his quotations from 1 Samuel have only been preserved in Armenian and Georgian translations. Most of the suggested agreements between Hippolytus and L are only apparent or coincidental. Irenaeus is the most trustworthy textual witness of the four early Church Fathers. His quotations from 1 Samuel agree with L several times against codex Vaticanus (B) and all or most of the other witnesses in preserving the original text. Tertullian and Cyprian agree with L in attesting some Hebraizing approximations that do not seem to be of Hexaplaric origin. The question is more likely of early Hebraizing readings of the same tradition as the kaige recension. In chapter 7 it is noted that Origen, although a pre-Lucianic Father, does not qualify as a proto-Lucianic witness. General observations about the Old Latin witnesses as well as an analysis of the manuscript La115 are given in chapter 8. In chapter 9 the theory of the proto-Lucianic recension is discussed. In order to demonstrate the existence of the proto-Lucianic recension one should find instances of indisputable agreement between the Qumran biblical manuscripts and L in readings that are secondary in Greek. No such case can be found in the Qumran material in 1 Samuel. In the text-historical conclusions (chapter 10) it is noted that of all the suggested proto-Lucianic agreements in 1 Samuel (about 75 plus 70 in La115) more than half are only apparent or, at best, coincidental. Of the indisputable agreements, however, 26 are agreements in the original reading. In about 20 instances the agreement is in a secondary reading. These agreements are early variants; mostly minor changes that happen all the time in the course of transmission. Four of the agreements, however, are in a pre-Hexaplaric Hebraizing approximation that has found its way independently into the pre-Lucianic witnesses and the Lucianic recension. The study aims at demonstrating the value of the Lucianic text as a textual witness: under the recensional layer(s) there is an ancient text that preserves very old, even original readings which have not been preserved in B and most of the other witnesses. The study also confirms the value of the early Church Fathers as textual witnesses.

A general procedure for generation of curved DNA molecules.

A general method for generation of base-pairs in a curved DNA structure, for any prescribed values of helical parameters--unit rise (h), unit twist (theta), wedge roll (theta R) and wedge tilt (theta T), propeller twist (theta p) and displacement (D) is described. Its application for generation of uniform as well curved structures is also illustrated with some representative examples. An interesting relationship is observed between helical twist (theta), base-pair parameters theta x, theta y and the wedge parameters theta R, theta T, which has important consequences for the description and estimation of DNA curvature.

Distributed nonlinear optimization algorithms for general network problems

There are a number of large networks which occur in many problems dealing with the flow of power, communication signals, water, gas, transportable goods, etc. Both design and planning of these networks involve optimization problems. The first part of this paper introduces the common characteristics of a nonlinear network (the network may be linear, the objective function may be non linear, or both may be nonlinear). The second part develops a mathematical model trying to put together some important constraints based on the abstraction for a general network. The third part deals with solution procedures; it converts the network to a matrix based system of equations, gives the characteristics of the matrix and suggests two solution procedures, one of them being a new one. The fourth part handles spatially distributed networks and evolves a number of decomposition techniques so that we can solve the problem with the help of a distributed computer system. Algorithms for parallel processors and spatially distributed systems have been described.There are a number of common features that pertain to networks. A network consists of a set of nodes and arcs. In addition at every node, there is a possibility of an input (like power, water, message, goods etc) or an output or none. Normally, the network equations describe the flows amoungst nodes through the arcs. These network equations couple variables associated with nodes. Invariably, variables pertaining to arcs are constants; the result required will be flows through the arcs. To solve the normal base problem, we are given input flows at nodes, output flows at nodes and certain physical constraints on other variables at nodes and we should find out the flows through the network (variables at nodes will be referred to as across variables).The optimization problem involves in selecting inputs at nodes so as to optimise an objective function; the objective may be a cost function based on the inputs to be minimised or a loss function or an efficiency function. The above mathematical model can be solved using Lagrange Multiplier technique since the equalities are strong compared to inequalities. The Lagrange multiplier technique divides the solution procedure into two stages per iteration. Stage one calculates the problem variables % and stage two the multipliers lambda. It is shown that the Jacobian matrix used in stage one (for solving a nonlinear system of necessary conditions) occurs in the stage two also.A second solution procedure has also been imbedded into the first one. This is called total residue approach. It changes the equality constraints so that we can get faster convergence of the iterations.Both solution procedures are found to coverge in 3 to 7 iterations for a sample network.The availability of distributed computer systems — both LAN and WAN — suggest the need for algorithms to solve the optimization problems. Two types of algorithms have been proposed — one based on the physics of the network and the other on the property of the Jacobian matrix. Three algorithms have been deviced, one of them for the local area case. These algorithms are called as regional distributed algorithm, hierarchical regional distributed algorithm (both using the physics properties of the network), and locally distributed algorithm (a multiprocessor based approach with a local area network configuration). The approach used was to define an algorithm that is faster and uses minimum communications. These algorithms are found to converge at the same rate as the non distributed (unitary) case.

The British Intervention in South Russia 1918-1920

Soon after the Bolshevik Revolution of 1917, a three-year civil war broke out in Russia. As in many other civil wars, foreign powers intervened in the conflict. Britain played a leading role in this intervention and had a significant effect on the course of the war. Without this intervention on the White side, the superiority of numbers in manpower and weaponry of the Bolsheviks would have quickly overwhelmed their opponents. The aim of this dissertation is to explain the nature and role of the British intervention on the southern, and most decisive, front of the Civil War. The political decision making in London is studied as a background, but the focus of the dissertation is on the actual implementation of the British policy in Russia. The British military mission arrived in South Russia in late 1918, and started to provide General Denikin s White army with ample supplies. General Denikin would have not been able to build his army of more than 200,000 men or to make his operation against Moscow without the British matériel. The British mission also organized the training and equipping of the Russian troops with British weapons. This made the material aid much more effective. Many of the British instructors took part in fighting the Bolsheviks despite the orders of their government. The study is based on primary sources produced by British departments of state and members of the British mission and military units in South Russia. Primary sources from the Whites, including the personal collections of several key figures of the White movement and official records of the Armed Forces of South Russia are also used to give a balanced picture of the course of events. It is possible to draw some general conclusions from the White movement and reasons for their defeat from the study of the British intervention. In purely material terms the British aid placed Denikin s army in a far more favourable position than the Bolsheviks in 1919, but other military defects in the White army were numerous. The White commanders were unimaginative, their military thinking was obsolete, and they were incapable of organizing the logistics of their army. There were also fundamental defects in the morale of the White troops. In addition to all political mistakes of Denikin s movement and a general inability to adjust to the complex situation in Revolutionary Russia, the Whites suffered a clear military defeat. In South Russia the Whites were defeated not because of the lack of British aid, but rather in spite of it.

Flow forecasts in general planning of municipal water and sewage works

Vuorokausivirtaaman ennustaminen yhdyskuntien vesi- ja viemärilaitosten yleissuunnittelussa.

Methods in general model localization

The aim of this study was to evaluate and test methods which could improve local estimates of a general model fitted to a large area. In the first three studies, the intention was to divide the study area into sub-areas that were as homogeneous as possible according to the residuals of the general model, and in the fourth study, the localization was based on the local neighbourhood. According to spatial autocorrelation (SA), points closer together in space are more likely to be similar than those that are farther apart. Local indicators of SA (LISAs) test the similarity of data clusters. A LISA was calculated for every observation in the dataset, and together with the spatial position and residual of the global model, the data were segmented using two different methods: classification and regression trees (CART) and the multiresolution segmentation algorithm (MS) of the eCognition software. The general model was then re-fitted (localized) to the formed sub-areas. In kriging, the SA is modelled with a variogram, and the spatial correlation is a function of the distance (and direction) between the observation and the point of calculation. A general trend is corrected with the residual information of the neighbourhood, whose size is controlled by the number of the nearest neighbours. Nearness is measured as Euclidian distance. With all methods, the root mean square errors (RMSEs) were lower, but with the methods that segmented the study area, the deviance in single localized RMSEs was wide. Therefore, an element capable of controlling the division or localization should be included in the segmentation-localization process. Kriging, on the other hand, provided stable estimates when the number of neighbours was sufficient (over 30), thus offering the best potential for further studies. Even CART could be combined with kriging or non-parametric methods, such as most similar neighbours (MSN).

Optimal infinite-horizon feedback laws for a general class of constrained discrete-time systems: stability and moving-horizon approximations

Stability results are given for a class of feedback systems arising from the regulation of time-varying discrete-time systems using optimal infinite-horizon and moving-horizon feedback laws. The class is characterized by joint constraints on the state and the control, a general nonlinear cost function and nonlinear equations of motion possessing two special properties. It is shown that weak conditions on the cost function and the constraints are sufficient to guarantee uniform asymptotic stability of both the optimal infinite-horizon and movinghorizon feedback systems. The infinite-horizon cost associated with the moving-horizon feedback law approaches the optimal infinite-horizon cost as the moving horizon is extended.