Synthesis of Nondestructive Testing Technologies for Geomaterial Applications, May 2005

Current monitoring techniques for determination of compaction of earthwork and asphalt generally involve destructive testing of the materials following placement. Advances in sensor technologies show significant promise for obtaining necessary information through nondestructive and remote techniques. To develop a better understanding of suitable and potential technologies, this study was undertaken to conduct a synthesis review of nondestructive testing technologies and perform preliminary evaluations of selected technologies to better understand their application to testing of geomaterials (soil fill, aggregate base, asphalt, etc.). This research resulted in a synthesis of potential technologies for compaction monitoring with a strong emphasis on moisture sensing. Techniques were reviewed and selectively evaluated for their potential to improve field quality control operations. Activities included an extensive review of commercially available moisture sensors, literature review, and evaluation of selected technologies. The technologies investigated in this study were dielectric, nuclear, near infrared spectroscopy, seismic, electromagnetic induction, and thermal. The primary disadvantage of all the methods is the small sample volume measured. In addition, all the methods possessed some sensitivity to non-moisture factors that affected the accuracy of the results. As the measurement volume increases, local variances are averaged out providing better accuracy. Most dielectric methods with the exception of ground penetrating radar have a very small measurement volume and are highly sensitive to variations in density, porosity, etc.

"Vinci Cosmetics" Fabricación y comercialización de productos cosméticos

Contexto: La idea principal es la creación de una empresa para la fabricación y comercialización de productos cosméticos de alta gama. A pesar del contexto de crisis económica en el que estamos envueltos estos últimos años y del que no parece que acabamos de salir, el sector de la cosmética está resistiendo la situación de forma envidiable. De la crisis, como dicen los economistas, “se saldrá y se volverá, todo es cíclico” y viendo la fortaleza que éste sector está mostrando unido a la necesidad de que nuestra economía abandone sectores muy deteriorados y sin una previsión positiva de futuro, la cosmética se postula con un futuro prometedor dentro del contexto económico español y europeo. “Vinci Cosmetics” es el nombre inicialmente pensado para que la nueva compañía inicie su andadura. Nombre con tintes latinos de la lejana época del imperio romano como homenaje a la rica herencia histórica de la ciudad del autor del proyecto - Tarragona. La cultura por cuidarse y sentirse bien, muy arraigada en la mentalidad latina y mediterránea, es un factor cultural clave para el desarrollo y futura evolución de esta industria. El slogan de la empresa, “Dieta Mediterránea para tu piel”, clarifica en buena medida la idea a desarrollar y los objetivos pretendidos por la estrategia empresarial. Objetivos: El objetivo esencial del TFC es elaborar un estudio detallado para la creación de una empresa de fabricación y comercialización de productos cosméticos de alta gama que abarque el management y la gestión por procesos de la empresa, la función de marketing, el tipo de operaciones y procesos a realizar, la gestión del factor humano y el presupuesto necesario para cubrir este ambicioso proyecto. En detalle, un completo plan de empresa que marque las directrices de la organización industrial que se pretende crear compuesto a su vez por cinco planes: plan de gerencia, plan de marketing, plan de operaciones, plan de recursos humanos y plan económico – financiero. Procedimientos: El proyecto tiene un alto componente de estudio de mercados y de marketing pero pretende también abarcar el management, los procesos de operación, el factor humano y el aspecto económico y financiero de las inversiones y presupuesto necesario. El estudio inicial centrará su esfuerzo en un análisis del mercado de la península ibérica, y, en función del avance y del progreso esperado por la empresa, la compañía podría extender su campo de acción a Europa aunque no antes de un medio plazo. “Vinci Cosmetics” ha adoptado referenciales de sistemas de gestión integrados en toda la organización. Así tenemos principalmente, por un lado, la norma internacional ISO 9001:2008 y, por otro, el Modelo EFQM de Excelencia en la gestión; ambos plasmados a partir de un enfoque basado en procesos que nos garantiza el control continuo y la gestión excelente. Conclusiones: Tras evaluar la situación actual del mercado de la cosmética, las previsiones futuras de éste y las necesidades que una organización industrial necesita, se puede crear - con plenas garantías de éxito como organización empresarial y desde el punto de vista económico - una empresa de cosméticos de alta gama para cubrir las necesidades de una parte de mercado que lo requiere.

Oxygen consumption in collagenase-liberated rat adipocytes in relation to cell size and age.

Oxygen consumption of collagenase-liberated rat adipocytes was measured by two different techniques: a microspectrophotometric method using hemoglobin as indicator of respiration and a technique using the oxygen electrode. These two completely different techniques gave similar values for oxygen consumption. With the spectrophotometric method, the oxygen consumption of single fat cells was determined. A close positive correlation (r = greater than 0.90) between oxygen consumption and fat cell size was observed in each tissue examined. With the oxygen electrode technique, oxygen consumption of adipocyte suspensions from young (40 days, 180 g) and old (90 days, 480 g) rats was examined. Fat cells of the suspensions were separated into classes of different size by a flotation technique. A significant positive correlation between fat cell size and oxygen consumption was observed in both young (r = 0.88) and old (r = 0.95) rats. However, the slope was much steeper in young rats. At a cell weight of 0.1 microgram the oxygen consumption was 0.364 and 0.086 microL O2/10(6) cells/min-1 in young and old rats, respectively. In the literature, a number of separate metabolic pathways have been found to be related positively to fat cell size and negatively to age. We conclude that these scattered metabolic observations are in agreement with integrated data on energy expenditure as evaluated from oxygen consumption. Estimations of the energy expenditure of adipose tissue indicates that this tissue is responsible for about 1% and 0.5% of the total energy expenditure in young and old rats, respectively.

Characterization of lower-limbs inter-segment coordination during the take-off extension in ski jumping.

Take-off, the most important phase in ski jumping, has been primarily studied in terms of spatio-temporal parameters; little is known about its motor control aspects. This study aims to assess the inter-segment coordination of the shank-thigh and thigh-sacrum pairs using the continuous relative phase (CRP). In total 87 jumps were recorded from 33 athletes with an inertial sensor-based system. The CRP curves indicated that the thighs lead the shanks during the first part of take-off extension and that the shanks rotated faster at the take-off extension end. The thighs and sacrum first rotated synchronously, with the sacrum then taking lead, with finally the thighs rotating faster. Five characteristic features were extracted from the CRP and their relationship with jump length was tested. Three features of the shank-thigh pair and one of the thigh-sacrum pair reported a significant association with jump length. It was observed that athletes who achieved longer jumps had their thighs leading their shanks during a longer time, with these athletes also having a more symmetric movement between thighs and sacrum. This study shows that inter-segment coordination during the take-off extension is related to performance and further studies are necessary to contrast its importance with other ski jumping aspects.

Effect of n-3 fatty acids on cerebral markers and the inflammatory response in sepsis

Introduction ICM+ software encapsulates our 20 years' experience in brain monitoring. It collects data from a variety of bedside monitors and produces time trends of parameters defi ned using confi gurable mathematical formulae. To date it is being used in nearly 40 clinical research centres worldwide. We present its application for continuous monitoring of cerebral autoregulation using near-infrared spectroscopy (NIRS). Methods Data from multiple bedside monitors are processed by ICM+ in real time using a large selection of signal processing methods. These include various time and frequency domain analysis functions as well as fully customisable digital fi lters. The fi nal results are displayed in a variety of ways including simple time trends, as well as time window based histograms, cross histograms, correlations, and so forth. All this allows complex information from bedside monitors to be summarized in a concise fashion and presented to medical and nursing staff in a simple way that alerts them to the development of various pathological processes. Results One hundred and fi fty patients monitored continuously with NIRS, arterial blood pressure (ABP) and intracranial pressure (ICP), where available, were included in this study. There were 40 severely headinjured adult patients, 27 SAH patients (NCCU, Cambridge); 60 patients undergoing cardiopulmonary bypass (John Hopkins Hospital, Baltimore) and 23 patients with sepsis (University Hospital, Basel). In addition, MCA fl ow velocity (FV) was monitored intermittently using transcranial Doppler. FV-derived and ICP-derived pressure reactivity indices (PRx, Mx), as well as NIRS-derived reactivity indices (Cox, Tox, Thx) were calculated and showed signifi cant correlation with each other in all cohorts. Errorbar charts showing reactivity index PRx versus CPP (optimal CPP chart) as well as similar curves for NIRS indices versus CPP and ABP were also demonstrated. Conclusions ICM+ software is proving to be a very useful tool for enhancing the battery of available means for monitoring cerebral vasoreactivity and potentially facilitating autoregulation guided therapy. Complexity of data analysis is also hidden inside loadable profi les, thus allowing investigators to take full advantage of validated protocols including advanced processing formulas.

Development of a Conductometric Test for Frost Resistance of Concrete, HR-272, 1988

Research is described that was aimed at developing a test method which can be reasonably and rapidly performed in the laboratory and in the field to predict, with a high degree of certainty, the behavior of concrete subjected to the action of alternate freezing and thawing. The conductometric evaluation of concrete durability was explored with 3 different test methods: conductometric evaluation of the resistance of concrete to rapid freezing and thawing; conductomtric evaluation of the resistance of concrete to natural freezing and thawing, and conductometric evaluation of the pore size distribution of concrete and its correlation to concrete durability. The study showed that conductance could be used as a viable method for determining the durability of portland cement concrete. This would also allow the continuous monitoring of concrete durability without the removal twice per week from the freeze/thaw chamber. Recommendations for the continued development of these test methods are also included.

Structural investigations into the interaction of hemoglobin and part structures with bacterial endotoxins.

An understanding of details of the interaction mechanisms of bacterial endotoxins (lipopolysaccharide, LPS) with the oxygen transport protein hemoglobin is still lacking, despite its high biological relevance. Here, a biophysical investigation into the endotoxin:hemoglobin interaction is presented which comprises the use of various rough mutant LPS as well as free lipid A; in addition to the complete hemoglobin molecule from fetal sheep extract, also the partial structure alpha-chain and the heme-free sample are studied. The investigations comprise the determination of the gel-to-liquid crystalline phase behaviour of the acyl chains of LPS, the ultrastructure (type of aggregate structure and morphology) of the endotoxins, and the incorporation of the hemoglobins into artificial immune cell membranes and into LPS. Our data suggest a model for the interaction between Hb and LPS in which hemoglobins do not react strongly with the hydrophilic or with the hydrophobic moiety of LPS, but with the complete endotoxin aggregate. Hb is able to incorporate into LPS with the longitudinal direction parallel to the lipid A double-layer. Although this does not lead to a strong disturbance of the LPS acyl chain packing, the change of the curvature leads to a slightly conical molecular shape with a change of the three-dimensional arrangement from unilamellar into cubic LPS aggregates. Our previous results show that cubic LPS structures exhibit strong endotoxic activity. The property of Hb on the physical state of LPS described here may explain the observation of an increase in LPS-mediating endotoxicity due to the action of Hb.

Highway Applications for Rammed Aggregate Piers in Iowa Soils, TR-443, 2003

This report describes a study to evaluate Geopier® soil reinforcement technology in transportation construction. Three projects requiring settlement control were chosen for evaluation—an embankment foundation, a box culvert, and a bridge approach fill. For each project, construction observations, in situ soil testing, laboratory material characterization, and performance monitoring were carried out. For the embankment foundation project, Geopier elements were installed within and around an abutment footprint for the new I-35 overpass at the US Highway 5/Interstate 35 interchange in Des Moines, Iowa. Although the main focus of this investigation was to evaluate embankment foundation reinforcement using Geopier elements, a stone column reinforced soil provided an opportunity to compare systems. In situ testing included cone penetration tests (CPTs), pressuremeter tests (PMTs), Ko stepped blade tests, and borehole shear tests (BSTs), as well as laboratory material testing. Comparative stiffness and densities of Geopier elements and stone columns were evaluated based on full-scale modulus load tests and standard penetration tests. Vibrating wire settlement cells and total stress cells were installed to monitor settlement and stress concentration on the reinforcing elements and matrix soil. Settlement plates were also monitored by conventional optical survey methods. Results show that the Geopier system and the stone columns performed their intended functions. The second project involved settlement monitoring of a 4.2 m wide x 3.6 m high x 50 m long box culvert constructed beneath a bridge on Iowa Highway 191 south of Neola, Iowa. Geopier elements were installed to reduce total and differential settlement while ensuring the stability of the existing bridge pier foundations. Benefits of the box culvert and embankment fill included (1) ease of future roadway expansion and (2) continual service of the roadway throughout construction. Site investigations consisted of in situ testing including CPTs, PMTs, BSTs, and dilatometer tests. Consolidated drained triaxial compression tests, unconsolidated undrained triaxial compression test, oedometer tests, and Atterberg limit tests were conducted to define strength and consolidation parameters and soil index properties for classification. Vibrating wire settlement cells, total stress cells, and piezometers were installed for continuous monitoring during and after box culvert construction and fill placement. This project was successful at controlling settlement of the box culvert and preventing downdrag of the bridge foundations, but could have been enhanced by reducing the length of Geopier elements at the ends of the box culvert. This would have increased localized settlement while reducing overall differential settlement. The third project involved settlement monitoring of bridge approach fill sections reinforced with Geopier elements. Thirty Geopier elements, spaced 1.8 m apart in six rows of varying length, were installed on both sides of a new bridge on US Highway 18/218 near Charles City, Iowa. Based on the results of this project, it was determined that future applications of Geopier soil reinforcement should consider extending the elements deeper into the embankment foundation fill, not just the fill itself.

Sugarcane response to nitrogen rates, measured by a canopy reflectance sensor

Abstract:The objective of this work was to evaluate whether a canopy sensor is capable of estimating sugarcane response to N, as well as to propose strategies for handling the data generated by this device during the decision-making process for crop N fertilization. Four N rate-response experiments were carried out, with N rates varying from 0 to 240 kg ha-1. Two evaluations with the canopy sensor were performed when the plants reached average stalk height of 0.3 and 0.5 m. Only two experiments showed stalk yield response to N rates. The canopy sensor was able to identify the crop response to different N rates and the relationship of the nutrient with sugarcane yield. The response index values obtained from the canopy sensor readings were useful in assessing sugarcane response to the applied N rate. Canopy reflectance sensors can help to identify areas responsive to N fertilization and, therefore, improve sugarcane fertilizer management.

Asiakastyytyväisyys metalliteollisuuden yrityksessä

Tämän työn tarkoituksena on analysoida asiakastyytyväisyyttä ja sen mittaamista sekä luoda perusta asiakastyytyväisyyden jatkuvalle seurannalle. Tutkimuksessa luotuja teoreettisia malleja on sovellettu työn empiirisessä osuudessa terästen esikäsittelyyn erikoistuneeseen Oy Flinkenberg Ab:hen. Toteutetut mallit tulevat jatkossa toimimaan yrityksen jatkuvan kehitystyön perustana asiakastyytyväisyyden parantamiseksi. Asiakkaita ja asiakastyytyväisyyttä tarkastellaan monesta näkökulmasta. Teoreettisen viitekehyksen avulla analysoidaan asiakastyytyväisyyden eri tasoja, mitkä tekijät siihen vaikuttavat, miksi sitä mitataan ja kuinka se vaikuttaa yrityksen kannattavuuteen. Työn empiiriseen osaan liittyy yrityksen asiakkaiden keskuudessa tehty asiakastyytyväisyystutkimus sekä puhelinhaastattelut. Lisäksi henkilöstölle tehtiin kysely koskien asiakassuuntautuneisuutta. Tehdyt tutkimukset ja siitä saadut tulokset toimivat vertailupohjana jatkossa suoritettaville asiakastyytyväisyystutkimuksille sekä asiakastyytyväisyyden jatkuvalle seurannalle ja kehittämiselle.

Polttodirektiivien soveltaminen sellutehtaiden ilmapäästömittauksissa

EU:n polttodirektiivit, LCP- ja jätteenpolttodirektiivi ovat arkipäivää suuressa osassa polttolaitoksia Suomessakin lähivuosien kuluessa. Molemmat direktiivit on otettu mukaan Suomen lain-säädäntöön asetuksina, joita on hieman muutettu vastaamaan kansallisia tarpeita. Polttolaitokset tulevat muuttamaan aikaisempia käytäntöjään päästöistä mitattavien komponenttien sekä tarkkailujaksojen että raportoinnin osalta. Mittausten tulokset raportoidaan jatkossa yksikössä mg/Nm3. Jatkuvatoimisia mittausjärjestelmiä on asennettava yhä useampaan laitokseen ja savukaasuista tarkkaillaan pitoisuuksia päästöjen sijaan. Edelleen raportoidaan esim. ympäristölupaviranomaiselle vuosipäästöjen suuruus. Vuonna 2000 voimaan tulleen ympäristönsuojelulain ja -asetuksen velvoittamina toiminnassa olevat sellutehtaat ovat hakeneet uuden lain mukaista ympäristölupaa vuoden 2004 loppuun mennessä. Ympäristöluvan tarvitsevat myös kaikki teholtaan yli 50 MW:n polttolaitokset. Suuria polttolaitoksia koskeva LCP-direktiivi astuu voimaan vuoden 2008 alussa. Siksi uusissa ympäristöluvissa tullaantodennäköisesti vaatimaan myös sellutehtailta ko. direktiivin mukaisia mittaus-järjestelmiä ja päästörajoja. Laitoksissa on jo nyt melko kattavat päästömittausjärjestelmät, sillä myös voimassaolevat ympäristöluvat ja ilmapäästöjen tarkkailuohjelmat velvoittavat päästöjen jatkuvaan seurantaan pääosin samoista savukaasukomponenteista kuin mitä direktiivissäkin edellytetään. Tässä diplomityössä keskitytään LCP- ja jätteenpolttodirektiivien mittausvaatimuksiin, raja-arvoihin sekä raportointiin sekä Metsä-Botnian sellutehtaiden mittausjärjestelmien parantamis-toimenpiteisiin. Yksityiskohtainen toimintamalli on tehty Joutsenon tehtaan laitosta ja mittaus-järjestelmää silmällä pitäen. Sitä voidaan käyttää myös muillatehtailla mallina savukaasupäästöjen mittauksien ja laitteiden päivitysten yhteydessä. Toimintamalliin siirtyminen ei velvoita Metsä-Botnian tehtaita, mutta monet tehtaat haluavat laitteistokannan uusimisen yhteydessä siirtyä direktiivien vaatimuksia vastaavaan järjestelmään.

Luotettavuusarvio typen oksidien päästöjen jatkuvatoimiselle seurantamenetelmälle

Prosessiteollisuudessa syntyviä ilmapäästöjä seurataan jatkuvatoimisilla mittausjärjestelmillä. Jatkuvatoimisen päästöjen seurantajärjestelmän tulee tuottaa luotettavaa tietoa prosessin aiheuttamista päästöistä. Päästöjen seurannasta saataviin tuloksiin syntyy aina epävarmuutta, joka koostuu mittausolosuhteiden, mittausjärjestelmän tai mittauksen suorittamisen aiheuttamista epävarmuuksista. Työn alussa on kuvattu Stora Enso Oyj:n Imatran tehtaitten typen oksidien jatkuvatoiminen päästöjen seurantamenetelmä ja selvitetty seurantajärjestelmän suorittama päästöjen laskentamenetelmä. Lisäksi on tuotu esille päästömittaustuloksen epävarmuuteen vaikuttavia tekijöitä kyseisessä järjestelmässä. Selvityksessä merkittävimmäksi järjestelmän luotettavuuteen vaikuttavaksi tekijäksi osoittautui virheellinen mittaustieto, jota voidaan hallita järjestelmässä asettamalla raja-arvo mittaustiedolle ja tehostamalla käytönaikaista valvontaa. Lisäksi korvaamalla häiriöaikainen virheellinen mittaustieto laskennallisella pitoisuuden odotusarvolla päästölaskentaa varten, tuottaa seurantajärjestelmä luotettavampia typen oksidien päästötietoja raportointia varten.

Position sensorless electrically excited synchronous motor drive for industrial use based on direct flux linkage and torque control

Synchronous machines with an AC converter are used mainly in large drives, for example in ship propulsion drives as well as in rolling mill drives in steel industry. These motors are used because of their high efficiency, high overload capacity and good performance in the field weakening area. Present day drives for electrically excited synchronous motors are equipped with position sensors. Most drives for electrically excited synchronous motors will be equipped with position sensors also in future. This kind of drives with good dynamics are mainly used in metal industry. Drives without a position sensor can be used e.g. in ship propulsion and in large pump and blower drives. Nowadays, these drives are equipped with a position sensor, too. The tendency is to avoid a position sensor if possible, since a sensor reduces the reliability of the drive and increases costs (latter is not very significant for large drives). A new control technique for a synchronous motor drive is a combination of the Direct Flux Linkage Control (DFLC) based on a voltage model and a supervising method (e.g. current model). This combination is called Direct Torque Control method (DTC). In the case of the position sensorless drive, the DTC can be implemented by using other supervising methods that keep the stator flux linkage origin centered. In this thesis, a method for the observation of the drift of the real stator flux linkage in the DTC drive is introduced. It is also shown how this method can be used as a supervising method that keeps the stator flux linkage origin centered in the case of the DTC. In the position sensorless case, a synchronous motor can be started up with the DTC control, when a method for the determination of the initial rotor position presented in this thesis is used. The load characteristics of such a drive are not very good at low rotational speeds. Furthermore, continuous operation at a zero speed and at a low rotational speed is not possible, which is partly due to the problems related to the flux linkage estimate. For operation in a low speed area, a stator current control method based on the DFLC modulator (DMCQ is presented. With the DMCC, it is possible to start up and operate a synchronous motor at a zero speed and at low rotational speeds in general. The DMCC is necessary in situations where high torque (e.g. nominal torque) is required at the starting moment, or if the motor runs several seconds at a zero speed or at a low speed range (up to 2 Hz). The behaviour of the described methods is shown with test results. The test results are presented for the direct flux linkage and torque controlled test drive system with a 14.5 kVA, four pole salient pole synchronous motor with a damper winding and electric excitation. The static accuracy of the drive is verified by measuring the torque in a static load operation, and the dynamics of the drive is proven in load transient tests. The performance of the drive concept presented in this work is sufficient e.g. for ship propulsion and for large pump drives. Furthermore, the developed methods are almost independent of the machine parameters.

"Vinci Cosmetics" Fabricación y comercialización de productos cosméticos

Contexto: La idea principal es la creación de una empresa para la fabricación y comercialización de productos cosméticos de alta gama. A pesar del contexto de crisis económica en el que estamos envueltos estos últimos años y del que no parece que acabamos de salir, el sector de la cosmética está resistiendo la situación de forma envidiable. De la crisis, como dicen los economistas, “se saldrá y se volverá, todo es cíclico” y viendo la fortaleza que éste sector está mostrando unido a la necesidad de que nuestra economía abandone sectores muy deteriorados y sin una previsión positiva de futuro, la cosmética se postula con un futuro prometedor dentro del contexto económico español y europeo. “Vinci Cosmetics” es el nombre inicialmente pensado para que la nueva compañía inicie su andadura. Nombre con tintes latinos de la lejana época del imperio romano como homenaje a la rica herencia histórica de la ciudad del autor del proyecto - Tarragona. La cultura por cuidarse y sentirse bien, muy arraigada en la mentalidad latina y mediterránea, es un factor cultural clave para el desarrollo y futura evolución de esta industria. El slogan de la empresa, “Dieta Mediterránea para tu piel”, clarifica en buena medida la idea a desarrollar y los objetivos pretendidos por la estrategia empresarial. Objetivos: El objetivo esencial del TFC es elaborar un estudio detallado para la creación de una empresa de fabricación y comercialización de productos cosméticos de alta gama que abarque el management y la gestión por procesos de la empresa, la función de marketing, el tipo de operaciones y procesos a realizar, la gestión del factor humano y el presupuesto necesario para cubrir este ambicioso proyecto. En detalle, un completo plan de empresa que marque las directrices de la organización industrial que se pretende crear compuesto a su vez por cinco planes: plan de gerencia, plan de marketing, plan de operaciones, plan de recursos humanos y plan económico – financiero. Procedimientos: El proyecto tiene un alto componente de estudio de mercados y de marketing pero pretende también abarcar el management, los procesos de operación, el factor humano y el aspecto económico y financiero de las inversiones y presupuesto necesario. El estudio inicial centrará su esfuerzo en un análisis del mercado de la península ibérica, y, en función del avance y del progreso esperado por la empresa, la compañía podría extender su campo de acción a Europa aunque no antes de un medio plazo. “Vinci Cosmetics” ha adoptado referenciales de sistemas de gestión integrados en toda la organización. Así tenemos principalmente, por un lado, la norma internacional ISO 9001:2008 y, por otro, el Modelo EFQM de Excelencia en la gestión; ambos plasmados a partir de un enfoque basado en procesos que nos garantiza el control continuo y la gestión excelente. Conclusiones: Tras evaluar la situación actual del mercado de la cosmética, las previsiones futuras de éste y las necesidades que una organización industrial necesita, se puede crear - con plenas garantías de éxito como organización empresarial y desde el punto de vista económico - una empresa de cosméticos de alta gama para cubrir las necesidades de una parte de mercado que lo requiere.

Success factors of customer and supplier master data system

Especially in global enterprises, key data is fragmented in multiple Enterprise Resource Planning (ERP) systems. Thus the data is inconsistent, fragmented and redundant across the various systems. Master Data Management (MDM) is a concept, which creates cross-references between customers, suppliers and business units, and enables corporate hierarchies and structures. The overall goal for MDM is the ability to create an enterprise-wide consistent data model, which enables analyzing and reporting customer and supplier data. The goal of the study was defining the properties and success factors of a master data system. The theoretical background was based on literature and the case consisted of enterprise specific needs and demands. The theoretical part presents the concept, background, and principles of MDM and then the phases of system planning and implementation project. Case consists of background, definition of as is situation, definition of project, evaluation criterions and concludes the key results of the thesis. In the end chapter Conclusions combines common principles with the results of the case. The case part ended up dividing important factors of the system in success factors, technical requirements and business benefits. To clarify the project and find funding for the project, business benefits have to be defined and the realization has to be monitored. The thesis found out six success factors for the MDM system: Well defined business case, data management and monitoring, data models and structures defined and maintained, customer and supplier data governance, delivery and quality, commitment, and continuous communication with business. Technical requirements emerged several times during the thesis and therefore those can’t be ignored in the project. Conclusions chapter goes through these factors on a general level. The success factors and technical requirements are related to the essentials of MDM: Governance, Action and Quality. This chapter could be used as guidance in a master data management project.