Crescimento de mudas de maracujázeiro-amarelo em resposta à adubação com superfosfato simples e pó de rocha

Pesquisas feitas com pó de rocha têm mostrado a potencialidade de alguns resíduos em promover o enriquecimento mineral de solos pobres; prática definida como rochagem do solo. Este trabalho teve como objetivo avaliar o crescimento de mudas de maracujázeiro-amarelo (Passiflora edulis Sims f. flavicarpa Deg.) em resposta à adubação com superfosfato simples e pó de rocha. O experimento foi realizado no período de janeiro a abril de 2006, em casa de vegetação do Instituto de Ciências Agrárias da Universidade Federal de Minas Gerais (ICA-UFMG), localizado em Montes Claros/MG. Os tratamentos, em esquema fatorial 2 x 5, no delineamento em blocos casualizados, com três repetições, corresponderam à adição ao substrato de: duas doses de pó de rocha e cinco de superfosfato simples. Foram avaliados: altura das plantas, diâmetro do caule, número de folhas por planta, área foliar, massas de matéria fresca e seca da raiz, massas de matéria fresca e seca da parte aérea e conteúdo de fósforo na planta. Os resultados indicam aumento do crescimento das mudas com o incremento das doses de superfosfato simples e redução do efeito da adubação fosfatada com a adição de pó de rocha ao substrato, possivelmente relacionados a fenômenos de adsorção por formas de ferro amorfo e/ou por carbonatos, considerando que o pó de rocha provém da desintegração de ardósias, mármore e granito. A dose de superfosfato simples sem adição de pó de rocha, para se obterem mudas de maracujá com melhores características, deve ser de 3,0 a 6,5 kg m-3, enquanto com a adição de pó de rocha, de 6,0 a pelo menos 10,0 kg m-3.

Acúmulo e liberação de P, K, Ca e Mg em crotalária e milheto solteiros e consorciados

As características das leguminosas e gramíneas usadas como plantas de cobertura são bastante conhecidas, mas a velocidade com que os nutrientes associados à biomassa vegetal tornam-se disponíveis às culturas é ainda pouco estudada. O objetivo deste trabalho foi determinar o acúmulo e a taxa de liberação de nutrientes de crotalária e milheto solteiros ou consorciados. O delineamento experimental adotado foi blocos ao acaso, com quatro repetições. Os tratamentos foram crotalária, milheto, crotalária + milheto e vegetação espontânea. O acúmulo de P e Mg foi influenciado pela produção de massa, com valores elevados na crotalária, enquanto o acúmulo de Ca resultou tanto do maior teor quanto da maior produção de massa nos tratamentos com a leguminosa. A liberação de nutrientes dos resíduos apresentou dinâmica semelhante, com duas fases distintas: a primeira com taxas mais elevadas nos primeiros 15 dias e a segunda mais lenta a partir dessa fase. As taxas de liberação de K, Ca e Mg foram semelhantes, independentemente dos tratamentos. Os resíduos da crotalária apresentaram maior liberação de P do que as da vegetação espontânea, com meia vida de 11 dias e a vegetação espontânea de 17 dias. O Ca foi liberado mais lentamente do que os demais nutrientes, e o Mg mais rapidamente. As plantas espontâneas e o milheto apresentam importante potencial na reciclagem de K, e a crotalária se destacou na reciclagem de Ca e Mg.

Fiber average size and distribution dependence on the electrospinning parameters of poly(vinylidene fluoride trifluoroethylene)) membranes for biomedical applications

Poly(vinylidene fluoride-trifluoethylene) electrospun membranes were obtained from a blend of dimethylformamide (DMF) and methylethylketone (MEK) solvents. The inclusion of the MEK to the solvent system promotes a faster solvent evaporation allowing complete polymer crystallization during the jet travelling between the tip and the grounded collector. Several processing parameters were systematically changed to study their influence on fiber dimensions. Applied voltage and inner needle diameter do not have large influence on the electrospun fiber average diameter but in the fiber diameter distribution. On the other hand, the increase of the distance between the needle tip to collector results in fibers with larger average diameter. Independently on the processing conditions, all mats are produced in the electroactive phase of the polymer. Further, MC-3T3-E1cell adhesion was not inhibited by the fiber mats preparation, indicating their potential use for biomedical applications.

Osteoblast, fibroblast and in vivo biological response to poly(vinylidene fluoride) based composite materials

Electroactivematerials can be taken to advantage for the development of sensors and actuators as well as for novel tissue engineering strategies. Composites based on poly(vinylidenefluoride),PVDF,have been evaluated with respect to their biological response. Cell viability and proliferation were performed in vitro both with Mesenchymal Stem Cells differentiated to osteoblasts and Human Fibroblast Foreskin 1. In vivo tests were also performed using 6-week-old C57Bl/6 mice. It was concluded that zeolite and clay composites are biocompatible materials promoting cell response and not showing in vivo pro-inflammatory effects which renders both of them attractive for biological applications and tissue engineering, opening interesting perspectives to development of scaffolds from these composites. Ferrite and silver nanoparticle composites decrease osteoblast cell viability and carbon nanotubes decrease fibroblast viability. Further, carbon nanotube composites result in a significant increase in local vascularization accompanied an increase of inflammatory markers after implantation.

Processing and characterization of alpha-elastin electrospun membranes

Elastin isolated from fresh bovine ligaments was dissolved in a mixture of 1,1,1,3,3,3-Hexafluoro-2-propanol and water and electrospun into fiber membranes under different processing conditions. Fiber mats of randomly and aligned fibers were obtained with fixed and rotating ground collectors and fibrils were composed by thin ribbons whose width depends on electrospinning conditions; fibrils with 721 nm up to 2.12 m width were achieved. After cross-linking with glutaraldehyde, -elastin can uptake as much as 1700 % of PBS solution and a slight increase on fiber thickness was observed. The glass transition temperature of electrospun fiber mats was found to occur at ~ 80 ºC. Moreover, -Elastin showed to be a perfect elastomeric material, and no mechanical hysteresis was found in cycle mechanical measurements. The elastic modulus obtained for oriented and random fibers mats in a PBS solution was 330 ± 10 kPa and 732 ± 165 kPa, respectively. Finally, the electrospinning and cross-linking process does not inhibit MC-3T3-E1 cell adhesion. Cell culture results showed good cell adhesion and proliferation in the cross-linked elastin fiber mats.

Avaliação físico-química e aplicação de modelos matemáticos na predição do comportamento de polpas de manga desidratadas em pó

A manga é uma fruta tropical muito popular em virtude das suas características exóticas e do seu valor nutritivo, sendo bastante apreciada na culinária e na alimentação da população brasileira. Este trabalho teve como objetivo analisar o comportamento higroscópico dos pós de manga das variedades Rosa e Tommy Atkins através de isotermas de adsorção, e as características físico-químicas e minerais tanto destes pós quanto das frutas na sua forma in natura. A partir dos resultados obtidos das análises físico-químicas e minerais para as amostras in natura e em pó, observa-se que as variedades Rosa e Tommy Atkins são estatisticamente semelhantes entre si na maioria dos parâmetros analisados. No entanto, observa-se que a variedade Rosa apresentou uma melhor qualidade nutricional que a variedade Tommy Atkins, notadamente no que se refere ao teor de vitamina C e carotenóides. Para o ajuste das isotermas de adsorção, os modelos de GAB e de Oswin se ajustaram satisfatoriamente aos dados experimentais dos pós de manga, exceto para a variedade Rosa. Também foi detectado que em ambientes com atividade de água elevada (a partir de 0,70) os pós das variedades Rosa e Tommy Atkins apresentam um comportamento mais higroscópico.

Mechanical, electrical and electro-mechanical properties of thermoplastic elastomer styrene–butadiene–styrene/multiwall carbon nanotubes composites

Composites of styrene–butadiene–styrene (SBS) block copolymer with multiwall carbon nanotubes were processed by solution casting to investigate the influence of filler content, the different ratios of styrene/butadiene in the copolymer and the architecture of the SBS matrix on the electrical, mechanical and electro-mechanical properties of the composites. It was found that filler content and elastomer matrix architecture influence the percolation threshold and consequently the overall composite electrical conductivity. The mechanical properties are mainly affected by the styrene and filler content. Hopping between nearest fillers is proposed as the main mechanism for the composite conduction. The variation of the electrical resistivity is linear with the deformation. This fact, together with the gauge factor values in the range of 2–18, results in appropriate composites to be used as (large) deformation sensors.

On the origin of the electrical response of vapor grown carbon nanofiber + epoxy composites

The origin of the electrical response of vapor grown carbon nanofiber (VGCNF) + epoxy composites is investigated by studying the electrical behavior of VGCNF with resin, VGCNF with hardener and cured composites, separately. It is demonstrated that the onset of the conductivity is associated to the emergence of a weak disorder regime. It is also shown that the weak disorder regime is related to a hopping depending on the physical properties of the polymer matrix.

Temperature dependence of the electrical conductivity of vapor grown carbon nanofiber/epoxy composites with different filler dispersion levels

The influence of the dispersion of vapor grown carbon nanofibers (VGCNF) on the electrical properties of VGCNF/epoxy composites has been studied. A homogeneous dispersion of the VGCNF does not imply better electrical properties. The presence of well distributed clusters appears to be a key factor for increasing composite conductivity. It is also shown that the main conduction mechanism has an ionic nature for concentrations below the percolation threshold, while above the percolation threshold it is dominated by hopping between the fillers. Finally, using the granular system theory it is possible to explain the origin of conduction at low temperatures.

The role of disorder on the AC and DC electrical conductivity of vapour grown carbon nanofibre/epoxy composites

Four dispersion methods were used for the preparation of vapour grown carbon nanofibre (VGCNF)/epoxy composites. It is shown that each method induces certain levels of VGCNF dispersion and distribution within the matrix, and that these have a strong influence on the composite electrical properties. A homogenous VGCNF dispersion does not necessarily imply higher electrical conductivity. In fact, it is concluded that the presence of well distributed clusters, rather than a fine dispersion, is more important for achieving larger conductivities for a given VGCNF concentration. It is also found that the conductivity can be described by a weak disorder regime.

Multi-scale modeling of the mechanical behavior of polymer-based materials

Polymers have become the reference material for high reliability and performance applications. In this work, a multi-scale approach is proposed to investigate the mechanical properties of polymeric based material under strain. To achieve a better understanding of phenomena occurring at the smaller scales, a coupling of a Finite Element Method (FEM) and Molecular Dynamics (MD) modeling in an iterative procedure was employed, enabling the prediction of the macroscopic constitutive response. As the mechanical response can be related to the local microstructure, which in turn depends on the nano-scale structure, the previous described multi-scale method computes the stress-strain relationship at every analysis point of the macro-structure by detailed modeling of the underlying micro- and meso-scale deformation phenomena. The proposed multi-scale approach can enable prediction of properties at the macroscale while taking into consideration phenomena that occur at the mesoscale, thus offering an increased potential accuracy compared to traditional methods.

Effect of fiber alignment in gelled electrospun membranes based on poly(vinylidene fluoride) for battery applications

Battery separators based on electrospun membranes of poly(vinylidene fluoride) (PVDF) have been prepared in order to study the effect of fiber alignment on the performance and characteristics of the membrane. The prepared membranes show an average fiber diameter of 272 nm and a degree of porosity of 87 %. The gel polymer electrolytes are prepared by soaking the membranes in the electrolyte solution. The alignment of the fibers improves the mechanical properties for the electrospun membranes. Further, the microstructure of the membrane also plays an important role in the ionic conductivity, being higher for the random electrospun membrane due to the lower tortuosity value. Independently of the microstructure, both membranes show good electrochemical stability up to 5.0 V versus Li/Li+. These results show that electrospun membranes based on PVDF are appropriate for battery separators in lithium-ion battery applications, the random membranes showing a better overall performance.

Energy harvesting performance of piezoelectric electrospun polymer fibers and polymer/ceramic composites

The energy harvesting efficiency of electrospun poly(vinylidene fluoride), its copolymer vinylidene fluoride-trifluoroethylene and composites of the later with piezoelectric BaTiOon interdigitated electrodes has been investigated. Further, a study of the influence of the electrospinning processing parameters on the size and distribution of the composites fibers has been performed. It is found that the best energy harvesting performance is obtained for the pure poly(vinylidene fluoride) fibers, with power outputs up to 0.03 W and 25 W under low and high mechanical deformation. The copolymer and the composites show reduced power output due to increased mechanical stiffness. The obtained values, among the largest found in the literature, the easy processing and the low cost and robustness of the polymer, demonstrate the applicability of the developed system.

Carbon Nanofiber Type and Content Dependence of the Physical Properties of Carbon Nanofiber Reinforced Polypropylene Composites

The variation of the physical properties of four differ- ent carbon nanofibers (CNFs), based-polymer nano- composites incorporated in the same polypropylene (PP) matrix by twin-screw extrusion process was investigated. Nanocomposites fabricated with CNFs with highly graphitic outer layer revealed electrical isolation-to-conducting behaviors as function of CNF’s content. Nanocomposites fabricated with CNFs with an outer layer consisting on a disordered pyro- litically stripped layer, in contrast, revealed better mechanical performance and enhanced thermal sta- bility. Further, CNF’s incorporation into the polymer increased the thermal stability and the degree of crystallinity of the polymer, independently on the filler content and type. In addition, dispersion of the CNFs’ clusters in PP was analyzed by transmitted light opti- cal microscopy, and grayscale analysis (GSA). The results showed a correlation between the filler concentration and the variance, a parameter which measures quantitatively the dispersion, for all composites. This method indicated a value of 1.4 vol% above which large clusters of CNFs cannot be dispersed effectively and as a consequence only slight changes in mechanical performance are observed. Finally, this study establishes that for tailoring the physical properties of CNF based-polymer nanocomposites, both adequate CNFs structure and content have to be chosen.

No-till corn performance in response to P and fertilization modes

No-tillage systems provide soil changes that affect nutrient dynamics, hence, changing rates and forms of fertilizer application. This study aimed to evaluate the effect of phosphorus (P) and modes of nitrogen (N) and P application in corn under long-term no-tillage in a clayey Oxisol. Two experiments were carried out in the same experimental area and in the same year, in a randomized blocks design with four replications. In experiment I, the treatments consisted of five doses of phosphorus (0, 40, 80, 120 and 160 kg ha-1 of P2O5) applied in the sowing furrow. In experiment II, the treatments consisted of the N and P application modes (topdressing, in the sowing furrow and control - without N and P). Experiment I evaluated the root length, P uptake and grain yield and, the Experiment II, the firing height and yield. The P rates provided linear increases in root length in the 0-10 cm layer, P uptake and grain production. The different modes of application provided differences in the firing height and corn yield. The control treatment (0 kg ha-1 of N and P) provided the highest firing height, superior than those of topdressing and application in the furrow, which were not significantly different. The topdress application of N and P provided an increase in corn yield that exceeded 16 and 42% of the application in the furrow and the control, respectively. Thus, the results confirmed that increasing rates of P2O5, in soil with high initial P content, influence positively corn production factors, but with little significant responses, and the topdress application of N and P on soil with high P content, without water restriction, provided increased grain yield in relation to the application in the furrow.