Modelagem e simulação da formação de hidrocarbonetos na combustão do gás natural

A exaustão de um veículo de motor a diesel é uma importante fonte de poluentes atmosféricos, pois forma uma matriz complexa composta de poluentes regulados e não regulados pelos órgãos governamentais. Dentre os poluentes regulados podemos citar óxidos de nitrogênio (NOx) e material particulado. Os poluentes não regulados são pouco estudados até hoje e dentre estes encontra-se a classe dos hidrocarbonetos policíclicos aromáticos e seus derivados nitrados (nitro-HPA). Estes são encontrados na exaustão do diesel na forma gasosa ou agregados ao material particulado. Hoje, o interesse em estudos destes compostos vem aumentando, devido às suas atividades carcinogênicas e mutagênicas às quais estão sujeitas as populações dos centros urbanos. O impacto causado pelos nitro-HPA emitidos por motores a ciclo diesel ao ambiente não está ainda completamente estabelecido. Este estudo consiste na modelagem e simulação do processo de combustão de hidrocarbonetos na faixa de C1 a C4 com o objetivo de descrever a formação de compostos aromáticos, principalmente HPA, e óxidos de nitrogênio a partir de modelos cinéticos de combustão propostos na literatura como referência e fazendo uso do software de simulação Kintecus. Este projeto tem como objetivo em longo prazo propor um modelo cinético para combustão do óleo Diesel. Foi iniciada a construção de um modelo cinético de combustão a partir de modelos de hidrocarbonetos simples de C1 a C4, com formação de aromáticos, HPA e óxidos de nitrogênio. Os modelos originais foram avaliados e modificados a fim de estudar como parâmetros do modelo afetam a concentração das espécies de interesse. Foi observado a tendência de formação de benzeno e fulveno em baixas temperaturas e a tendência de formação de antraceno, pireno, fenantreno a temperaturas mais altas. Foi avaliado que a conversão NO-NO2 ocorre em maiores proporções em reações iniciadas a baixas temperaturas, 600 K. Os resultados indicam que propano é o maior responsável por esta conversão. O modelo final obtido resultou da união dos modelos de combustão Hori e Marinov mais inclusão do GRI-Mech 3.0 e reações adicionais de NOx retiradas da base de dados NIST

Perfil dos HPA prioritários na exaustão de veículo a diesel, no combustível diesel utilizado durante os ensaios de emissão veicular e no óleo lubrificante do motor

As concentrações na exaustão e os fatores de emissão dos hidrocarbonetos policíclicos aromáticos (HPA) prioritários de um veículo a diesel e as suas respectivas concentrações no diesel usado durante os ensaios de emissão veicular foram determinados com a finalidade de estimar a contribuição dos HPA provenientes do combustível nas emissões. Os produtos da combustão foram coletados diretamente nas emissões brutas do escapamento, utilizando um sistema de amostragem a volume constante sem diluição dos gases da exaustão. Os HPA associados ao MP foram amostrados de forma estratificada, utilizando um impactador em cascata MOUDI e filtros de fibra de vidro como substratos, e os HPA em fase gasosa foram amostrados usando cartuchos de amberlite XAD-2. A concentração dos HPA no óleo lubrificante do motor também foi monitorada ao longo do tempo até a sua troca após 12.000 km de uso. Após a extração e tratamento das amostras, a identificação e quantificação dos HPA foram realizadas, utilizando cromatografia de fase gasosa acoplada à espectrometria de massas (CG-EM) com injetor de grande volume de vaporização com a temperatura programável (PTV-LVI). Cinco variáveis do PTV-LVI foram otimizadas, utilizando planejamento de experimentos, o que permitiu obter limites de detecção menores do que 2,0 g L-1. Somente 7 dos 16 HPA prioritários foram identificados na exaustão: NAP, ACY, ACE, FLU, FEN, FLT e PYR. Os ensaios de emissão veicular foram realizados com o veículo em modo estacionário, sem aplicação de carga e com baixa velocidade de rotação do motor (1500 rpm), utilizando um diesel com menor teor de enxofre (10 mg kg-1) e com 5% v/v de biodiesel. Esses fatores possivelmente contribuíram para reduzir as emissões dos outros 9 HPA a valores abaixo dos limites de detecção do método desenvolvido. Aproximadamente 80% da massa dos HPA totais associados ao MP estavam presentes em partículas com tamanho entre 1,0 m e 56 nm, e aproximadamente 4,5% estavam presentes em partículas menores do que 56 nm. Partículas menores que 2,5 m são facilmente inaladas e depositadas no trato respiratório e na região alveolar, justificando a preocupação com relação às emissões de HPA associados a partículas provenientes da exaustão veicular de motores a diesel. Somente 5 dos 7 HPA identificados na exaustão foram detectados no diesel: NAP, ACY, FLU, FEN e PYR. A razão entre os fatores de emissão (g L-1diesel) dos HPA na exaustão e suas respectivas concentrações do diesel (g L-1) variaram de 0,01 0,02 a 0,05 0,029, dependendo do HPA. Esses valores indicam que pelo menos 95 a 99% dos HPA identificados no diesel foram destruídos e/ou transformados em outros compostos durante a combustão, e/ou foram retidos no reservatório do óleo lubrificante. Por outro lado, os HPA que tiveram maiores concentrações no diesel também apresentaram maiores fatores de emissão, o que sugere que os HPA provenientes do diesel possuem uma contribuição significativa para as emissões dos HPA totais. O perfil dos HPA prioritários no óleo lubrificante mostrou-se semelhante ao perfil dos HPA no diesel e nas emissões totais, onde o NAP, FEN e PYR foram os HPA majoritários

Consumo de carnes por forma de preparo no Brasil.

A plausível associação entre o consumo de carnes e o desenvolvimento do câncer colorretal vem sendo em parte explicada pelo processo de formação de aminas heterocíclicas e hidrocarbonetos aromáticos durante a cocção. No Brasil este tipo de câncer encontra-se entre as três mais frequentes causas de óbito por câncer tanto em homens como em mulheres, sendo as regiões Sul e Sudeste as que apresentam as maiores taxas de mortalidade. Este estudo tem como objetivo estimar o consumo médio per capita e prevalência de carnes segundo formas de preparo no Brasil, com ênfase nas técnicas grelhado/brasa/churrasco e frito. Foram utilizados dados do Inquérito Nacional de Alimentação (INA) que faz parte da Pesquisa de Orçamentos Familiares (POF) realizado entre os anos de 2008 e 2009. Nesse inquérito foram analisadas informações referentes ao consumo alimentar de 34.003 indivíduos com dez anos de idade ou mais, contemplando questões a cerca da quantidade de alimentos consumidos em unidades de medidas caseiras, forma de preparo do alimento e local de consumo (alimentação dentro do domicílio ou quando o alimento foi preparado e consumido fora do domicílio). As medias de carnes em geral foram estratificadas por sexo, escolaridade, quarto de renda, grandes regiões geográficas, situação do domicílio (urbano/rural) e local de consumo (dentro/fora do lar). Para a extração dos valores médios per capita consumidos, foram utilizados os procedimentos survey para levar em consideração os efeitos do desenho amostral. Verificou-se que a maior média per capita de consumo em gramas ocorreu no grupo de carne bovina, e a forma de preparo frito apresentou a maior média per capita de ingestão (31 gramas/ dia). Agrupando-se todos os tipos de carnes em apenas uma classe, "carnes em geral", a forma de preparação frita permaneceu com média de consumo demasiadamente maior que a forma grelhado/brasa/churrasco em todas as variáveis analisadas. Quando desagregado pelas variáveis de interesse, a maior média de consumo per capita de carnes em geral ocorreu na mais alta categoria de escolaridade (21 gramas/ dia) para o tipo grelhado/brasa/churrasco e entre residentes da região Norte (111gramas/ dia) para o tipo frito. As menores médias per capita ocorreram entre os indivíduos no primeiro quarto de renda (1,96 gramas/ dia) para aqueles que consumiram grelhado/brasa/churrasco e para as carnes fritas a menor média foi observada fora do domicílio (20 gramas/ dia). Os achados indicam que existe uma acentuada diferença entre o consumo médio per capita de grelhado/brasa/churrasco e fritos entre as regiões brasileiras, sendo mais evidente quando desagregado por variáveis sócio demográficas.

Protocols for conducting dolphin capture-release health assessment studies

Marine mammals, such as dolphins, can serve as key indicator species in coastal areas by reflecting the effects of natural and anthropogenic stressors. As such they are often considered sentinels of environmental and ecosystem health (Bossart 2006; Wells et al. 2004; Fair and Becker 2000). The bottlenose dolphin is an apex predator and a key component of many estuarine environments in the southeastern United States (Woodward-Clyde Consultants 1994; SCDNR 2005). Health assessments of dolphins are especially critical in areas where populations are depleted, show signs of epidemic disease and/or high mortality and/or where habitat is being altered or impacted by human activities. Recent assessments of environmental conditions in the Indian River Lagoon, Florida (IRL) and the estuarine waters surrounding Charleston, South Carolina (CHS) highlight the need for studies of the health of local bottlenose dolphins. While the condition of southeastern estuaries was rated as fair in the National Coastal Condition Report (U.S. EPA 2001), it was noted that the IRL was characterized by poorer than expected benthic communities, significant sediment toxicity and increased nutrient concentrations. Similarly, portions of the CHS estuary have sediment concentrations of aliphatic aromatic hydrocarbons, select inorganic metals, and some persistent pesticides far in excess of reported bioeffect levels (Hyland et al. 1998). Long-term trends in water quality monitoring and recent scientific research suggest that waste load assimilation, non-point source runoff impacts, contaminated sediments, and toxic pollutants are key issues in the CHS estuary system. Several ‘hot spots’ with high levels of heavy metals and organic compounds have been identified (Van Dolah et al. 2004). High concentrations of anthropogenic trace metals, polychlorinated biphenyls (PCB’s) and pesticides have been found in the sediments of Charleston Harbor, as well as the Ashley and Cooper Rivers (Long et al. 1998). Two superfund sites are located within the CHS estuary and the key contaminants of concern associated with these sites are: polycyclic aromatic hydrocarbons (PAH), lead, chromium, copper, arsenic, zinc and dioxin. Concerns related to the overall health of IRL dolphins and dermatologic disease observed in many dolphins in the area (Bossart et al. 2003) initiated an investigation of potential factors which may have impacted dolphin health. From May-August 2001, 35 bottlenose dolphins died in the IRL during an unusual mortality event (MMC 2003). Many of these dolphins were diagnosed with a variety of skin lesions including proliferative ulcerative dermatitis due to protozoa and fungi, dolphin pox and a vesicular dermatopathy of unknown etiology (Bossart et al. 2003). Multiple species from fish to dolphins in the IRL system have exhibited skin lesions of various known and unknown etiologies (Kane et al. 2000; Bossart et al. 2003; Reif et al. 2006). On-going photo-identification (photo-ID) studies have documented skin diseases in IRL dolphins (Mazzoil et al. 2005). In addition, up to 70% of green sea turtles in the IRL exhibit fibropapillomas, with the highest rates of occurrence being seen in turtles from the southern IRL (Hirama 2001).

Porphyrin detection in denatured cnidarian tissue extracts

Porphyrin metabolic disruption from exposure to xenobiotic contaminants such as heavy metals, dioxins, and aromatic hydrocarbons can elicit overproduction of porphyrins. Measurement of porphyrin levels, when used in conjunction with other diagnostic assays, can help elucidate an organism’s physiological condition and provide evidence for exposure to certain toxicants. A sensitive microplate fluorometric assay has been optimized for detecting total porphyrin levels in detergent solubilized protein extracts from symbiotic, dinoflagellate containing cnidarian tissues. The denaturing buffer used in this modified assay contains a number of potentially interfering components (e.g., sodium dodecyl sulfate (SDS), dithiothreitol (DTT), protease inhibitors, and chlorophyll from the symbiotic zooxanthellae), which required examination and validation. Examination of buffer components were validated for use in this porphyrin assay; while the use of a specific spectrofluorometric filter (excitation 400 ± 15 nm; emission 600 ± 20 nm) minimized chlorophyll interference. The detection limit for this assay is 10 fmol of total porphyrin per μg of total soluble protein and linearity is maintained up to 5000 fmol. The ability to measure total porphyrins in a SDS protein extract now allows a single extract to be used in multiple assays. This is an advantage over classical methods, particularly when tissue samples are limiting, as is often the case with coral due to availability and collection permit restrictions.

Chemical contaminants in the coral Porites astreoides from southwest Puerto Rico

This report presents an initial characterization of chemical contamination in coral tissues (Porites astreoides) from southwest Puerto Rico. It is the second technical report from a project to characterize chemical contaminants and assess linkages between contamination and coral condition. The first report quantified chemical contaminants in sediments from southwest Puerto Rico. This document summarizes the analysis of nearly 150 chemical contaminants in coral tissues. Although only eight coral samples were collected, some observations can be made on the correlations between observed tissue and sediment contaminant concentrations. The concentrations of polycyclic aromatic hydrocarbons (PAHs), typically associated with petroleum spills and the combustion of fossil fuels, and polychlorinated biphenyls (PCBs) in the coral tissues were comparable to concentrations found in adjacent sediments. However, the concentration of a chemical contaminant (e.g., PAHs) in the coral tissues at a particular site was not a good predictor of what was in the adjacent sediments. In addition, the types of PAHs found in the coral tissues were somewhat different (higher ratios of alkylated PAHs) than in sediments. The levels of PCBs and DDT in coral tissues appeared higher just outside of Guanica Bay, and there was evidence of a downstream concentration gradient for these two contaminant classes. The trace elements copper, zinc and nickel were frequently detected in coral tissues, and the concentration in the corals was usually comparable to that found in adjacent sediments. Chromium was an exception in that it was not detected in any of the coral tissues analyzed. Additional work is needed to assess how spatial patterns in chemical contamination affect coral condition, abundance and distribution.

Humic acids in sediments of North-Central Arabian Sea, west coast of India

Sediment samples (28) collected during the ORV Sagar Kanya cruise-29, were analysed for humic acid (HA) concentration from the North-Central Arabian Sea. Generally oceanic samples had more HA concentration than the continental shelf (< 200 m depth) samples. The photo-acoustic infrared spectra of shelf sediment HA indicated the presence of more C-H saturated aliphatic chains, while oceanic HA had few peaks for the above groups. Both the IR spectra indicated the absence of aromatic C = C, carbonyl, ketonic groups. Clayey-silt sediment generally had higher concentration of HA compared to sandy-silt type of sediment.

渤海湾海岸带表层沉积物中黑炭和多环芳烃的分布特征

黑碳（BC）是生物质和化石燃料不完全燃烧产生的高度聚合的碳质混合物，包括木炭 （char/charcoal）和烟炱碳（soot）等形式。黑碳产生后大部分储存在燃烧原地，而烟炱碳 由于粒径较小，易进入大气，滞留一到数周后回到地表。部分土壤黑碳随河流和大气的搬 运作用进入海洋环境，主要汇集在海岸带沉积物中。由于黑碳涉及到气候变化、碳循环、 环境危害、人体健康等诸多问题而成为当前气候与环境领域的研究热点。黑碳在环境介质 中比较稳定，因而可以较好的指示人类能源使用及其对环境质量的影响；同时黑碳具有很 强的吸附性，能显著影响周围介质中持久性有机污染物(如多环芳烃等)的赋存状态和生态 毒理效应。 多环芳烃（PAHs）是指两个或两个以上的苯环以稠环形式结合的芳香族化合物，主要 来源于含碳物质的不完全燃烧过程，在环境中广泛存在。由于PAHs 具有潜在的致癌性、 致畸性和致突变性（“三致”效应）而在环境研究领域中备受关注。另外由于具有主体的 同源性，PAHs 可以指示BC 的来源和环境过程。 海岸带沉积物是包括BC 和PAHs 在内的众多污染物在环境地球化学迁移过程中的主 要载体和归宿，由于受到陆地和海洋双重作用，海岸带对环境污染物尤其敏感。环渤海地 区是我国北方的社会经济中心，工业、农业和交通发达、人口稠密，污染严重。前人的研 究表明渤海湾的BC 和PAHs 污染程度明显高于我国其他海岸带，但受限制于采样区域和 样品数量，不能全面地反应BC 和PAHs 在渤海湾海岸带的分布状况及人类活动对海岸带 环境质量的影响。 本次研究在渤海湾海岸带潮间带、近海及主要入海河流系统布设了多条采样剖面，采 集表层沉积物样品85 个。首先，对国际上较为常用的化学热氧化法（CTO-375）处理沉积 物黑碳样品的方法进行了比对实验和优化，然后对全部样品进行黑碳分析；利用GC-MS 方法对样品中的PAHs（USEPA 的16 种优控物）进行了定量检测；对全部沉积物样品还进 行了粒度分析。 结果表明，该区域内黑碳的含量为0.09 到22.8 mg/g dw，其中，潮间带样品的BC 平 均含量为0.52 ± 0.39 mg/g dw，近海样品为0.84 ± 0.38 mg/g dw，河流样品（海河样品除外） 为1.88 ± 0.89 mg/g dw。BC占总有机碳的比例在潮间带、近海、河流区域分别为18.4 ± 8.3%、 14.5 ± 5.3%、14.2 ± 4.1%。潮间带黑碳存在明显的“北高南低”的趋势（以天津港码头和 海河为界），与近海和河流样品的BC 浓度有相似的变化趋势，反映了BC 在海岸带的运移 扩散具有一定的继承性；河流输入可能是近岸沉积物BC 的主要来源。同时，潮间带沉积 物粒度分析结果表明“北区细”(以粘土质粉砂主)而“南区粗”(以砂为主)，反映了两个区 域不同的水动力条件和沉积环境，可能是造成BC 浓度空间分异的主要原因。 摘要 II 多环芳烃的含量分布为33.1-7658.7 ng/g dw，其中，潮间带样品的PAHs 平均含量为 147.0 ng/g dw，近海样品为170.9 ng/g dw，河流样品（海河样品除外）为1228.5 ng/g dw。 主要成分均为三环和四环多环芳烃。PAHs 也呈现出了与BC 相似的“北高南低”的趋势， 多环芳烃与黑碳的相关性研究表明两者相关性较好（R2=0.59），表明多环芳烃和黑碳的同 源性和继承性。运用比值法（菲/蒽，荧蒽/芘，低环/高环等）对多环芳烃的来源解析显示， 整个研究区域内多环芳烃主要为燃烧源。

On the photoluminescence of a-C:H films

a-C:H films deposited from methane and helium mixture in a capacitively coupled rf plasma were found to show photoluminescence (PL) with peak intensities at energies far above the Taue gap of these films. Apart from the PL the films were investigated with respect to their IR and UV/VIS absorption properties as well as their Raman spectra were examined. The ultraviolet (UV) and blue luminescence from hard a-C:H thin films are explained by incorporation of polycyclic hydrocarbons from gas-phase reactions in the methane helium plasma into the film.

How polluted is the Yangtze River? Water quality downstream from the Three Gorges Dam

The concentrations of major anions and cations, nitrogen and phosphorus, dissolved and particulate trace elements, and organic pollutants were determined for the middle and lower reaches of the Yangtze River (Changjiang) from below the Three Gorges Dam (TGD) to the mouth at Shanghai in November 2006. The concentration of dissolved inorganic phosphate (DIP) was constant at a low level of 6-8 mu gP/L, but the concentration of nitrate (NO3-) approximately doubled downstream and was closely correlated with K+. This translated to a daily load of well over 1000 It of dissolved inorganic nitrogen (DIN) at Datong. The average concentrations of dissolved Pb (0.078 +/- 0.023 mu g/L), Cd (0.024 +/- 0.009 mu g/L), Cr(0.57 +/- 0.09 mu g/L), Cu (1.9 +/- 0.7 mu g/L), and Ni (0.50 +/- 0.49 mu g/L) were comparable with those in other major world rivers, while As (3.3 +/- 1.3 mu g/L) and Zn (1.5 +/- 0.6 mu g/L) were higher by factors of 5.5 and 2.5, respectively. The trace element contents of suspended particles of As (31 +/- 28 mu g/g), Pb (83 +/- 34 mu g/g), and Ni (52 +/- 16 mu g/g) were close to maximum concentrations recommended for rivers by the European Community (EC). The average concentrations of Cd (2.6 +/- 1.6 mu g/g), Cr (185 +/- 102 mu g/g), Cu (115 +/- 106 mu g/g), and Zn (500 +/- 300 mu g/g) exceeded the EC standards by a factor of two, and Hg (4.4 +/- 4.7 mu g/g) by a factor of 4 to 5. Locally occurring peak concentrations exceed these values up to fourfold, among them the notorious elements As, Hg, and Tl. All dissolved and particulate trace element concentrations were higher than estimates made twenty years ago [Zhang, J., Geochemistry of trace metals from Chinese river/estuary systems: an overview. Estuar Coast Shelf Sci 1995; 41: 631-658.]. The enormous loads of anthropogenic pollutants disposed to the river were diluted by the large water discharge of the Yangtze even during the lowest flow resulting in the relatively low concentration levels of trace elements and organic pollutants observed. We estimated loads of e.g. As, Pb and Ni to the East China Sea to be about 4600 kg As d(-1), 3000 kg Pb d(-1), and 2000 kg Ni d(-1). About 6000 t d(-1) of dissolved organic carbon (DOC) was delivered into the sea at the time of our cruise. We tested for 236 organic pollutants, and only the most infamous were found to be barely above detection limits. We estimated that the load of chlorinated compounds, aromatic hydrocarbons, phenols, and PAHs were between 500 and 3500 kg d(-1). We also detected eight herbicides entering the estuary with loads of 5-350 kg d(-1). The pollutant load, even when at low concentrations, are considerable and pose an increasing threat to the health of the East China Sea ecosystem. (c) 2008 Elsevier B.V. All rights reserved.

A laboratory study on risk assessment of microcystin-RR in cropland

The persistence time and risk of microcystin-RR (MC-RR) in cropland via irrigation were investigated under laboratory conditions. In order to evaluate the efficiency of the potential adsorption and biodegradation of MC-RR in cropland and the persistence time of MC-RR for crop irrigation, high performance liquid chromatography (HPLC) was used to quantify the amount of MC-RR in solutions. Our study indicated that MC-RR could be adsorbed and biodegraded in cropland soils. MC-RR at 6.5 mg/L could be completely degraded within 6 days with a lag phase of 1 - 2 days. In the presence of humic acid, the same amount of MC-RR could be degraded within 4 days without a lag phase. Accordingly, the persistence time of MC-RR in cropland soils should be about 6 days. This result also suggested the beneficial effects of the organic fertilizer utilization for the biodegradation of MC-RR in cropland soils. Our studies also demonstrated that MC-RR at low concentration (< 10 mu g/L) could accelerate the growth of plants, while high concentration of MC-RR (> 100 mu g/L) significantly inhibited the growth of plants. High sensitivity of the sprouting stage plants to MC-RR treatments as well as the strong inhibitory effects resulting from prolonged irrigation further indicated that this MC-RR growth-inhibition may vary with the duration of irrigation and life stage of the plants. (c) 2007 Published by Elsevier Ltd.

Rapid bioassay as indicator of potentially harmful effects for dioxin-like compounds in sample of Ya-Er Lake, China: Requirements for clean-up and comparison to chemical analysis

A rapid bioassay was established measuring the extracts of wildlife samples which were taken from Ya-Er Lake area, China. In extracts of these samples containing PCDD/Fs and PCBs, bioassay and chemically derived TCDD-equivalents (TEQs) were nearly identical. Our results indicate this bioassay is an excellent complement to chemical residue analysis and a useful tool in understanding the complex interactions of halogenated hydrocarbons. However, it must be mentioned that the proper prior clean-up method is very important for using the bioassay.

微生物固定化方法修复多环芳烃污染土壤

针对传统游离微生物修复技术的缺点和弊端，提出了采用固定化微生物技术修复受多环芳烃污染的非流体介质的新课题。本文筛选出2株高效降解菌，并进行了固定化载体筛选，优化并确定了3种固定化工艺。通过实验室模拟实验，考察了固定化菌对PAHs污染非流体介质的修复能力，最后通过扫描电子显微镜（SEM）分析，对固定化微环境强化修复机制进行了初步探讨。 细菌芽孢杆菌（Bacillus sp.，SB02）和真菌毛霉（Mucor sp.，SF06）对土壤中的Pyr、BaP降解率高，降解速率快，为高效降解微生物。 碱化后的泥炭土适宜作为细菌固定化载体；玉米芯适宜作为真菌固定化载体；改性后蛭石适宜作为混合菌固定化载体。这些载体来源广泛，成本低廉，工艺简单，安全无毒。 将固定化菌应用于Pyr、BaP污染土壤的修复，考察了初始接种量、环境温度、土壤含水量对固定化菌降解Pyr、BaP的影响，固定化菌对不同系列浓度Pyr、BaP的降解，以及固定化菌在不灭菌土壤中对Pyr、BaP的降解，表明固定化菌对土壤中Pyr和BaP的降解率均高出游离菌20%，固定化混和菌降解效果最好，其次是固定化真菌，再次是固定化细菌。 SEM分析了固定化颗粒的微观结构和微生物在颗粒内部的形态变化，结果表明颗粒内部丰富的疏松多孔结构和巨大的比表面积为微生物提供了适宜的生存空间，使吸附固定化成为可能。 固定化菌对沈抚灌区PAHs污染土壤修复效果非常理想，经过6个月，土壤中总PAHs的去除率达70.3%，高于游离菌。

土壤中PAHs的光催化降解动力学及机制研究

本文以土壤为介质，以三环的菲（Phe）、四环的芘（Pyr）和五环的苯并[a]芘（BaP）为目标污染物，研究了紫外灯照射下土壤中多环芳烃（PAHs）的降解，并以半导体纳米TiO2和Fe2O3为催化剂研究了土壤中PAHs的催化降解，对光降解及光催化降解的动力学进行了研究，在室内条件下考察了土壤条件和环境因子对光降解及光催化降解PAHs的影响；研究了太阳光照条件下土壤pH值对光降解和催化降解的影响和腐殖酸对光降解的影响；初步探讨了纳米TiO2催化光降解土壤中PAHs的机制。 研究结果表明：土壤中PAHs的紫外光降解符合一级动力学模型，土壤中PAHs光降解与土壤厚度呈显著负相关，土壤粒径对紫外光解PAHs有显著影响，温度从20 ℃升高到30 ℃，光解速率逐渐增加，在PAHs污染土壤的光降解中腐殖酸起敏化作用，随着紫外辐射强度的增加，光降解速率加快。 纳米TiO2和Fe2O3均能促进土壤中PAHs的紫外光降解，PAHs光催化降解符合一级动力学模型，在酸性和碱性土壤条件下，光催化降解PAHs的速率均高于中性，在不同光质条件下，TiO2 、Fe2O3催化光降解PAHs的速率发生变化，随着紫外辐射强度的增加，光催化降解速率常数增加，半衰期减少；腐殖酸促进TiO2 、Fe2O3催化土壤中PAHs的光降解，腐殖酸在这个过程中起着敏化作用。 在太阳光照射下酸性和碱性土壤中PAHs的降解快于中性，PAHs污染土壤中在加入腐殖酸后光降解速率加快，在酸性条件下催化降解最快，在碱性和中性条件下相差不大。 土壤中PAHs存在着PAH的光致电离、电子向O2的转移的两种降解途径；在有催化剂TiO2条件下，由于催化剂在光照后形成的电子-空穴能够氧化还原污染物，PAH的光致电离、电子向O2的转移的引起的降解，共同促进了土壤中PAHs的光催化降解。

植物与微生物联合修复多环芳烃污染土壤及机理研究

本文以多环芳烃污染土壤为研究对象，以菲（Phe）、芘（Pyr）和苯并[a]芘（BaP）为目标污染物，以建立生态、经济、高效污染土壤修复技术为目标，在研究植物与微生物联合修复多环芳烃污染土壤效果的基础上，重点研究了植物与微生物联合修复污染土壤过程中多环芳烃的去除机制。 研究结果表明：种植苜蓿和黑麦草能够促进土壤中多环芳烃的去除，提高土壤中多环芳烃的去除率。植物根际土壤中多环芳烃的去除速度快于于非根际土壤。在植物与高效降解菌联合作用过程中，植物的存在强化了菌剂对土壤中多环芳烃的去除作用。苜蓿和黑麦草与高效降解菌的联合作用使菲、芘和苯并[a]芘去除率分别比对照土壤提高了26.64%、30.41%、32.04%和26.93%、27.43%、30.15%。 植物根和茎叶中菲、芘和苯并[a]芘的含量与土壤污染物浓度正相关，但其吸收积累作用对土壤中多环芳烃去除的贡献率小于0.34%。植物对土壤多环芳烃污染的修复作用主要源于植物生长显著提高了根际微生物的降解活性。 植物根际微生物的数量和土壤酶活性显著高于非根际土壤。植物根系的存在提高了土壤中微生物的数量和酶活性，从而提高了土壤中PAHs的去除率。这是根际土壤中多环芳烃去除的主要机制。 模拟根际修复，研究了添加根系分泌物对土壤中芘降解的影响。添加20mg/kg根系分泌物土壤中细菌数量为未添加根系分泌物土壤的19.43-36.29倍，真菌为3.05-6.60倍，土壤中芘的半衰期比未添加根系分泌物处理减少10.91天。植物根系分泌物是影响根际修复的一个重要原因。