Foreign Operation Mode Strategies of Finnish Companies in Russia

The object of this study was to examine foreign operation mode strategies used by Finnish companies in Russia. Thus, it was necessary to understand how Finnish companies have used foreign operation modes and which factors have influenced on their foreign operation mode strategies in Russia. Moreover, the purpose was also to find out that have Finnish companies switched, stretched or combined their foreign operation modes. The study's empirical part was conducted as a semi structured qualitative within-case and cross-case analysis of seven case companies that are selected to represent different industries. There are five Finnish LSEs and two Finnish SMEs as case companies. The results of this study indicated that Finnish companies have mainly used exporting as their initial entry mode to the Russian market. After they had gained understanding and experience of the Russian market, they switched from non-equity and simple foreign operation modes to more challenging and equity demanding foreign operation modes, and established wholly owned operations.

Näyttelijän taide venäläisessä elokuvassa 1907-1919

Väitöskirjan aihe on, kuinka elokuvanäyttelijän taide ja sitä koskeva ajattelu kehittyivät Venäjällä yksityisen elokuvatuotannon vuosina 1907–1919. Tutkimus kuuluu kulttuurihistorian alaan. Sen näkökulma on elokuvan esteettinen historia, ja tutkimus liittyy ns. revisionistisen elokuvahistorian pyrkimykseen arvioida uudelleen näytelmäelokuvan varhaisvaiheita. Analyysi kohdistuu esteettiseen aikalaisajatteluun sekä elokuvatuotannon käytäntöihin ja prosesseihin. Lähteinä on käytetty elokuvanäyttelemistä koskevaa julkista keskustelua, elokuvantekijöiden jättämää muistietoa ja ajalta säilyneitä elokuvia. Käsittely jakautuu kolmeen väljän kronologisesti järjestettyyn lukuun. Luku 2 keskittyy venäläisen fiktioelokuvan varhaisvuosiin 1910-luvun taitteen molemmin puolin. Luku 3 käsittelee pitkän näytelmäelokuvan läpimurrosta alkunsa saanutta keskustelua psykologisesta elokuvasta. Luku 4 etenee maailmansodan vuosina nouseen kuvallisen, ohjaajakeskeisen elokuvakäsityksen kautta kohti varhaisen neuvostoelokuvan ajatusta näyttelijästä ”mallina”. Väitöskirjassa esitetään, että käsitys näyttelemisestä, ja sitä myötä elokuvasta yleensä, kävi tutkittuna ajanjaksona läpi kehämäisen kehityksen, jossa vuorottelivat käsitykset elokuvasta modernina ja elokuvasta traditiona. Tutkimus problematisoi myöhempää elokuvakäsitystä, jonka mukaan elokuvaestetiikan perusyksikkö on otos. Toisin kuin myöhempinä vuosikymmeninä 1910-luvulla näytteleminen oli avainkysymys, jonka kautta lähestyttiin elokuvan olemusta itseään. Venäjällä ajatukset elokuvanäyttelemisestä kehittyivät vuorovaikutuksessa saman ajan teatteriestetiikan kanssa, joskin elokuva miellettiin jo varhain erilliseksi taidemuodoksi. Tsaarinajan elokuvan vaikutusvaltaisimmaksi esteettiseksi ohjelmaksi muodostui psykologinen elokuva, jonka inspiraationa toimi osittain Konstantin Stanislavskin samaan aikaan kehittämä näyttelijäntyön järjestelmä. Elävä näyttelijä ja näyttelijän ”kokeminen” nähtiin ratkaisuna elokuvavälineen keskeisenä ongelmana pidettyyn mekaanisuuteen. Ajan studiokäytännöissä psykologinen lähestymistapa puolestaan merkitsi usein vastausten etsimistä teollisen elokuvatuotannon olosuhteista syntyneisiin ongelmiin.

Gene Regulation in The Human Immune System. Gene Expression Signatures of Th2 Cell Differentiation, Type 1 Diabetes, and Intrauterine Immune Adaptation

The human immune system is constantly interacting with the surrounding stimuli and microorganisms. However, when directed against self or harmless antigens, these vital defense mechanisms can cause great damage. In addition, the understanding the underlying mechanism of several human diseases caused by aberrant immune cell functions, for instance type 1 diabetes and allergies, remains far from being complete. In this Ph.D. study these questions were addressed using genome-wide transcriptomic analyses. Asthma and allergies are characterized by a hyperactive response of the T helper 2 (Th2) immune cells. In this study, the target genes of the STAT6 transcription factor in naïve human T cells were identified with RNAi for the first time. STAT6 was shown to act as a central activator of the genes expression upon IL-4 signaling, with both direct and indirect effects on Th2 cell transcriptome. The core transcription factor network induced by IL-4 was identified from a kinetic analysis of the transcriptome. Type 1 diabetes is an autoimmune disease influenced by both the genetic susceptibility of an individual and the disease-triggering environmental factors. To improve understanding of the autoimmune processes driving pathogenesis in the prediabetic phase in humans, a unique series of prospective whole-blood RNA samples collected from HLA-susceptible children in the Finnish Type 1 Diabetes Prediction and Prevention (DIPP) study was studied. Changes in different timewindows of the pathogenesis process were identified, and especially the type 1 interferon response was activated early and throughout the preclinical T1D. The hygiene hypothesis states that allergic diseases, and lately also autoimmune diseases, could be prevented by infections and other microbial contacts acquired in early childhood, or even prenatally. To study the effects of the standard of hygiene on the development of neonatal immune system, cord blood samples from children born in Finland (high standard of living), Estonia (rapid economic growth) and Russian Karelia (low standard of living) were compared. Children born in Russian Karelia deviated from Finnish and Estonian children in many aspects of the neonatal immune system, which was developmentally more mature in Karelia, resembling that of older infants. The results of this thesis offer significant new information on the regulatory networks associated with immune-mediated diseases in human. The results will facilitate understanding and further research on the role of the identified target genes and mechanisms driving the allergic inflammation and type 1 diabetes, hopefully leading to a new era of drug development.

Johtajan vuorovaikutusosaaminen suomalais-venäläisessä esimies-alaissuhteessa

The participants in the dynamic Finnish working environment are expected to display communication skills, which is emphasized when different cultures meet. The objective of this thesis was to study the required interpersonal communication competence of leaders in a Finnish-Russian superior-subordinate relationship. The leadership was approached from a communicational perspective where leadership emerges in a dyadic relationship between leader and subordinate. The research was conducted as a qualitative case study. The data was gathered from interviews in the target organization. Four superiors and five of their subordinates were interviewed. The qualitative data gathered from the interviews was analyzed by theory-driven content analysis. The representative data was organized and coded in order to establish the main categories, which form a basis of the conclusions of the thesis. Interpersonal communication competence has a significant role alongside substance in leadership. The superiors in the workplace perceive communication as contextual. The findings indicate that there are certain tensions in the relationship between the superiors and their subordinates. The tensions are described as distance, collectiveness and emotions, and verbal expression and understanding. Leadership communication competence is about finding a balance between the tensions based on cultural differences. From the interpersonal communication research tradition point of view, the efficient and appropriate communication competence in this context consists of the knowledge of tensions and challenges, as well as the ability to manage cultural tensions and the motivation to react positively to cultural differences.

Co-creating value with customers as a new approach of entering new market

Global trends associated with development of information technology, globalization, industrial and economic changes are influencing on company and customer domains and thus transforming company-customer relationship. The company centric paradigm with a strong product focus shifts to a customer oriented one with a strong emphasis on customer collaboration. As a result, the customer role changes from a passive observer to an active player. Moreover, global trends contribute to transformation of competitive environment making it tougher and simplifying an access to resources previously considered as unique. All that factors push the companies towards cooperation with customers in order to identify unarticulated needs and finding the best possible solution to existing customer problems. The Master’s Thesis is done for Outotec (Lappeenranta) which considers extension of dewatering business in Russian coal market. Research aims to identify key features of coal preparation and dewatering of fine coal and tailings in Russian preparation plants; analyze the state of Russian coal market and evaluate market potential for Outotec dewatering solutions. The study has a qualitative nature and implements an action research methodology that involves both creation of knowledge and introduction of changes into the system. The base for taking actions is formed by theoretical framework that targets on describing company - customer interaction and has selected co-creation as the most appropriate method of customer involvement. The integration of co-creation approach into an action research cycle allows not only fulfilling the research objectives but also facilitates organizational learning and intraorganizational collaboration, assists in establishing customer contacts and making the first steps into the market, bringing new joint projects to the company and opening real business opportunities.

Application and development of numerical methods for the modelling of innovative gas cooled fission reactors

Innovative gas cooled reactors, such as the pebble bed reactor (PBR) and the gas cooled fast reactor (GFR) offer higher efficiency and new application areas for nuclear energy. Numerical methods were applied and developed to analyse the specific features of these reactor types with fully three dimensional calculation models. In the first part of this thesis, discrete element method (DEM) was used for a physically realistic modelling of the packing of fuel pebbles in PBR geometries and methods were developed for utilising the DEM results in subsequent reactor physics and thermal-hydraulics calculations. In the second part, the flow and heat transfer for a single gas cooled fuel rod of a GFR were investigated with computational fluid dynamics (CFD) methods. An in-house DEM implementation was validated and used for packing simulations, in which the effect of several parameters on the resulting average packing density was investigated. The restitution coefficient was found out to have the most significant effect. The results can be utilised in further work to obtain a pebble bed with a specific packing density. The packing structures of selected pebble beds were also analysed in detail and local variations in the packing density were observed, which should be taken into account especially in the reactor core thermal-hydraulic analyses. Two open source DEM codes were used to produce stochastic pebble bed configurations to add realism and improve the accuracy of criticality calculations performed with the Monte Carlo reactor physics code Serpent. Russian ASTRA criticality experiments were calculated. Pebble beds corresponding to the experimental specifications within measurement uncertainties were produced in DEM simulations and successfully exported into the subsequent reactor physics analysis. With the developed approach, two typical issues in Monte Carlo reactor physics calculations of pebble bed geometries were avoided. A novel method was developed and implemented as a MATLAB code to calculate porosities in the cells of a CFD calculation mesh constructed over a pebble bed obtained from DEM simulations. The code was further developed to distribute power and temperature data accurately between discrete based reactor physics and continuum based thermal-hydraulics models to enable coupled reactor core calculations. The developed method was also found useful for analysing sphere packings in general. CFD calculations were performed to investigate the pressure losses and heat transfer in three dimensional air cooled smooth and rib roughened rod geometries, housed inside a hexagonal flow channel representing a sub-channel of a single fuel rod of a GFR. The CFD geometry represented the test section of the L-STAR experimental facility at Karlsruhe Institute of Technology and the calculation results were compared to the corresponding experimental results. Knowledge was gained of the adequacy of various turbulence models and of the modelling requirements and issues related to the specific application. The obtained pressure loss results were in a relatively good agreement with the experimental data. Heat transfer in the smooth rod geometry was somewhat under predicted, which can partly be explained by unaccounted heat losses and uncertainties. In the rib roughened geometry heat transfer was severely under predicted by the used realisable k − epsilon turbulence model. An additional calculation with a v2 − f turbulence model showed significant improvement in the heat transfer results, which is most likely due to the better performance of the model in separated flow problems. Further investigations are suggested before using CFD to make conclusions of the heat transfer performance of rib roughened GFR fuel rod geometries. It is suggested that the viewpoints of numerical modelling are included in the planning of experiments to ease the challenging model construction and simulations and to avoid introducing additional sources of uncertainties. To facilitate the use of advanced calculation approaches, multi-physical aspects in experiments should also be considered and documented in a reasonable detail.

Sotilaspolitiikka Kremlin Olympoksella. Venäjän sotilasreformin diskursiivinen rakentuminen venäläisessä sanomalehdistössä 2008–2012

Tutkimus käsittelee venäläisessä sanomalehdistössä esiintyvää keskustelua Venäjän sotilasreformista. Tutkimuksessa haluttiin selvittää, millaisia diskursseja keskustelussa käytetään sotilasreformin oikeuttamiseksi ja miten ne toimivat vallankäytön välineenä. Tutkimus on monitieteinen. Se antaa vastauksia kielitieteellisessä kehyksessä kielen ja diskurssin roolista päätöksenteossa, yhteiskuntatieteellisessä kehyksessä venäläisestä mediasta ja päätöksentekojärjestelmästä sekä sotatieteellisessä kehyksessä asevoimien kehityksestä ja sotilaspolitiikasta. Tutkimuksen primääriaineisto muodostuu 220 artikkelista, jotka kerättiin yhdeksästä venäläisestä sanomalehdestä vuosien 2008–2012 ajalta. Venäjän johtohenkilöt ja heitä tukevat sanomalehdet oikeuttivat sotilasreformia julkisessa keskustelussa ensisijaisesti viiden syyn avulla: uhkien lisääntymisellä, sodan kuvan muutoksella, asevoimien kalustollisella ja toiminnallisella jälkeenjääneisyydellä, henkilöstön osaamisen alhaisella tasolla ja tarpeella toiminnan järkeistykseen. Sotilasreformin päätöksiä oikeutettiin vetoamalla niiden huolelliseen suunnitteluun, henkilöstön asialliseen kohteluun ja taloudellisten asioiden vakauteen. Sanomalehdistössä esiintyi paljon toisistaan poikkeavia näkemyksiä kehitykseen tarvittavasta suunnasta. Suurin osa kritisoivista diskursseista keskittyi kritisoimaan reformin toteutusta, ei sen olemassaoloa. Kritiikki keskittyi tiedotuksen ja demokraattisen päätöksenteon puutteeseen sekä epäilyksiin reformin valmisteluprosessista. Venäjän asevoimia ja sotilaspolitiikkaa koskevaa uutisointia on ongelmallista tarkastella ilman diskurssikäytäntöjen huomiointia. Venäjän johdon ja sen legitimiteettiä vahvistavien sanomalehtien diskursiivisen vallankäytön tavoitteena on saada Venäjä näyttämään todellisuutta vahvemmalta ja yhtenäisemmältä. Vaikka venäläinen media ja siinä etenkin televisio ei ole vapaata, sanomalehdistö on verrattain hyvä tiedonlähde. Sen varsin monipuolinen omistajuus tutkimusaineiston rajauksen aikana mahdollisti erilaisten näkökulmien esillepääsyn. Analyyttisimmin sotilasreformista uutisoivat ne sanomalehdet, jotka eivät nähneet länsimaita Venäjän uhkana ja representoivat diskursseissaan liberalistisia arvoja kuten avoimuutta ja demokratiaa. Sanomalehdistön vaatimaton rooli venäläisessä mediakentässä heikentää kuitenkin sen vaikuttavuutta yleiseen mielipiteeseen. Sanomalehtien diskurssikäytäntöjen analysointi ideologioiden ja vallankäytön kautta voi tarjota mahdollisuuksia parantaa venäläisen valtionjohdon päätösten ennustettavuutta.

Koulutuspalveluyrityksen kansainvälinen laajentuminen

Tämän tutkimuksen tarkoituksena on tarkastella kansallisen palveluyrityksen laajentumista uusille kansainvälisille markkinoille. Kohdemaana oli Venäjä. Päähuomio keskittyy ylimmän johdon toimiin, heidän rooliinsa laajentumisessa ja kuinka luoda onnistunut laajentumisstrategia. Tutkimuksen lähtökohdat poikkeavat perinteisistä laajentumistutkimuksista, sillä tässä tutkimuksessa keskitytään yhteen erityiseen tapaukseen ja laajentuminen tapahtuu Venäjän riskialttiille markkinoille. Yritys operoi myös tuotealan sijaan palvelualalla. Tutkimuksen tulokset osoittavat, että laajentuminen uudelle markkina-alueelle on laaja ja monimutkainen prosessi, jota ei tule väheksyä. Partnerin kanssa toimiminen vähentää suoraa riskiä, mutta toisaalta nostaa esiin toisenlaisia haasteita kuten kulttuurien välisiä näkemyseroja johtajuuteen tai jokapäiväiseen toimenpiteiden suorittamiseen. Uudelle markkina-alueelle vaaditaan ympäristöön sopiva strategia ja sen luominen entuudestaan tuntemattomalle alueelle vaatii uusia valmiuksia. Keskeistä on johtaa aktiivisesti halutun strategian toteuttamiseksi muistaen selkeän viestinnän ja realistisen aikataulusuunnittelun. Kilpailijoiden analysointia ei saa unohtaa ja sitä pitää toteuttaa jatkuvalla aikataululla. Toisin kuin useimmat markkinalaajentumista käsittelevät tutkimukset, tämä tutkimus keskittyy ylimmän johdon toimintaan.

Analyzing the Effects of the New Renewable Energy Policy in Russia on Investments into Wind, Solar and Small Hydro Power

This thesis presents an analysis of recently enacted Russian renewable energy policy based on capacity mechanism. Considering its novelty and poor coverage by academic literature, the aim of the thesis is to analyze capacity mechanism influence on investors’ decision-making process. The current research introduces a number of approaches to investment analysis. Firstly, classical financial model was built with Microsoft Excel® and crisp efficiency indicators such as net present value were determined. Secondly, sensitivity analysis was performed to understand different factors influence on project profitability. Thirdly, Datar-Mathews method was applied that by means of Monte Carlo simulation realized with Matlab Simulink®, disclosed all possible outcomes of investment project and enabled real option thinking. Fourthly, previous analysis was duplicated by fuzzy pay-off method with Microsoft Excel®. Finally, decision-making process under capacity mechanism was illustrated with decision tree. Capacity remuneration paid within 15 years is calculated individually for each RE project as variable annuity that guarantees a particular return on investment adjusted on changes in national interest rates. Analysis results indicate that capacity mechanism creates a real option to invest in renewable energy project by ensuring project profitability regardless of market conditions if project-internal factors are managed properly. The latter includes keeping capital expenditures within set limits, production performance higher than 75% of target indicators, and fulfilling localization requirement, implying producing equipment and services within the country. Occurrence of real option shapes decision-making process in the following way. Initially, investor should define appropriate location for a planned power plant where high production performance can be achieved, and lock in this location in case of competition. After, investor should wait until capital cost limit and localization requirement can be met, after that decision to invest can be made without any risk to project profitability. With respect to technology kind, investment into solar PV power plant is more attractive than into wind or small hydro power, since it has higher weighted net present value and lower standard deviation. However, it does not change decision-making strategy that remains the same for each technology type. Fuzzy pay-method proved its ability to disclose the same patterns of information as Monte Carlo simulation. Being effective in investment analysis under uncertainty and easy in use, it can be recommended as sufficient analytical tool to investors and researchers. Apart from described results, this thesis contributes to the academic literature by detailed description of capacity price calculation for renewable energy that was not available in English before. With respect to methodology novelty, such advanced approaches as Datar-Mathews method and fuzzy pay-off method are applied on the top of investment profitability model that incorporates capacity remuneration calculation as well. Comparison of effects of two different RE supporting schemes, namely Russian capacity mechanism and feed-in premium, contributes to policy comparative studies and exhibits useful inferences for researchers and policymakers. Limitations of this research are simplification of assumptions to country-average level that restricts our ability to analyze renewable energy investment region wise and existing limitation of the studying policy to the wholesale power market that leaves retail markets and remote areas without our attention, taking away medium and small investment into renewable energy from the research focus. Elimination of these limitations would allow creating the full picture of Russian renewable energy investment profile.

Narrow Gap flux-cored arc welding of high strength shipbuilding steels

This thesis is part of the Arctic Materials Technologies Development –project. The research of the thesis was done in cooperation with Arctech Helsinki Shipyard, Lappeenranta University of Technology and Kemppi Oy. Focus of the thesis was to study narrow gap flux-cored arc welding of two high strength steels with three different groove angles of 20°, 10° and 5°. Welding of the 25 mm thick E500 TMCP and 10 mm thick EH36 steels was mechanized and Kemppi WisePenetration and WiseFusion processes were tested with E500 TMCP steel. EH36 steel test pieces were welded without Wise processes. Shielding gases chosen were carbon dioxide and a mixture of argon and carbon dioxide. Welds were tested with non-destructive and destructive testing methods. Radiographic, visual, magnetic particle and liquid penetrant testing proved that welds were free from imperfections. After non-destructive testing, welds were tested with various destructive testing methods. Impact strength, bending, tensile strength and hardess tests proved that mechanized welding and Wise processes produced quality welds with narrower gap. More inconsistent results were achieved with test pieces welded without Wise processes. Impact test results of E500 TMCP exceeded the 50 J limit on weld, set by Russian Maritime Register of Shipping. EH36 impact test results were much closer to the limiting values of 34 J on weld and 47 on HAZ. Hardness values of all test specimens were below the limiting values. Bend testing and tensile testing results fulfilled the the Register requirements. No cracking or failing occurred on bend test specimens and tensile test results exceeded the Register limits of 610 MPa for E500 TMCP and 490 MPa for EH36.

Forest inventory information needs in Northwest Russia

This thesis applies the customer value hierarchy model to forestry in order to determine strategic options to enhance the value of LiDAR technology in Russian forestry. The study is conducted as a qualitative case study with semi-structured interviews as a main source of the primary data. The customer value hierarchy model constitutes a theoretical base for the research. Secondary data incorporates information on forest resource management, LiDAR technology and Russian forestry. The model is operationalised using forestry literature and forms a basis for analyses of primary data. Analyses of primary data coupled with comprehension of Russian forest inventory system and knowledge on global forest inventory have led to conclusions on the forest inventory methods selection criteria and the organizations that would benefit the most from LiDAR technology use. The thesis recommends strategic options for LiDAR technology’s value enhancement in Russian forestry.

Baltic. Gulf of Finland. Sheet VII, Hogland to St. Petersburg / Hydrographic Office.

0-meridiaani: Greenwich.

The northern provinces of Sweden and Norway with part I, of Russia / published under the superintendence of the Society for the Diffusion of Useful Knowledge.

[N. 1:4400000].

Russia in Europe / engraved by J. & C. Walker.

Janamittakaavat: Russian verstes ; English miles.

Russia or Moscovy in Europe. Drawn by the latest authorities, by Tho.s Kitchin geo.r.

Janamittakaava: Russian wersts.