Engine performance characteristics for biodiesels of different degrees of saturation and carbon chain lengths

This experimental study examines the effect on performance and emission outputs of a compression ignition engine operating on biodiesels of varying carbon chain length and the degree of unsaturation. A well-instrumented, heavy-duty, multi-cylinder, common-rail, turbo-charged diesel engine was used to ensure that the results contribute in a realistic way to the ongoing debate about the impact of biofuels. Comparative measurements are reported for engine performance as well as the emissions of NOx, particle number and size distribution, and the concentration of the reactive oxygen species (which provide a measure of the toxicity of emitted particles). It is shown that the biodiesels used in this study produce lower mean effective pressure, somewhat proportionally with their lower calorific values; however, the molecular structure has been shown to have little impact on the performance of the engine. The peak in-cylinder pressure is lower for the biodiesels that produce a smaller number of emitted particles, compared to fossil diesel, but the concentration of the reactive oxygen species is significantly higher because of oxygen in the fuels. The differences in the physicochemical properties amongst the biofuels and the fossil diesel significantly affect the engine combustion and emission characteristics. Saturated short chain length fatty acid methyl esters are found to enhance combustion efficiency, reduce NOx and particle number concentration, but results in high levels of fuel consumption.

A Review of potential countermeasures for motorcycle and scooter safety practices across APEC for project : Compendium of Best Practices on Motorcycle and Scooter Safety

Motorcyclists and scooter riders are among the most vulnerable road users, across APEC. This report assesses the potential road safety measures that can be used to address these issues and selects measures that could feasibly and effectively be implemented across the Asia Pacific Economic Communities (APEC). The scope of the report is confined to on-road motorcycle riding. While the numbers of injuries resulting from off-road riding (including as part of farm work) are likely to be substantial based on data from other states, many of the issues and measures to reduce trauma in off-road riding would be quite different. A previous report described important motorcycle and scooter safety issues across APEC economies and any current barriers that might exist in implementing potentially effective countermeasures.

Legal Profession Act 2007 : entitlement to itemised bill – meaning of “client” – meaning of “third party payer”

In Legal Services Commissioner and Wright [2010] QSC 168 and Amos v Ian K Fry & Company, the Supreme Court of Queensland considered the scope of some of the provisions of the Legal Profession Act 2007 (Qld), including the definition of “third party payer” in s 301 of the Act.

Personal Injuries Proceedings Act 2002 s 27(1) – duty of respondent to give information and documents

In Hare v Mount Isa City Council [2009] QDC 39 McGill DCJ examined the scope of s 27(1) of the Personal Injuries Proceedings Act 2002 (Qld) and its interpretation by the Court of Appeal in Haug v Jupiters Ltd [2008] 1 Qd R 276. The judge expressed a number of concerns about the Act and the Regulation made under it, that are worthy of consideration by the Legislature.

Supreme Court Act 1995 (Qld) s 253 – whether refusal to stay execution of costs is an order “as to costs only”

In Virgtel Ltd v Zabusky [2009] QCA 92 the Queensland Court of Appeal considered the scope of an order “as to costs only” within the meaning of s 253 of the Supreme Court Act 1995 (Qld) (‘the Act”). The Court also declined to accept submissions from one of the parties after oral hearing, and made some useful comments which serve as a reminder to practitioners of their obligations in that regard.

Low temperature response of nanostructured tungsten oxide thin films toward hydrogen and ethanol

Semiconducting metal oxide based gas sensors usually operate in the temperature range 200–500 °C. In this paper, we present a new WO3 thin film based gas sensor for H2 and C2H5OH, operating at 150 °C. Nanostructured WO3 thin films were synthesized by thermal evaporation method. The properties of the as-deposited films were modified by annealing in air at 300 °C and 400 °C. Various analytical techniques such as AFM, TEM, XPS, XRD and Raman spectroscopy have been employed to characterize their properties. A clear indication from TEM and XRD analysis is that the as-deposited WO3 films are highly amorphous and no improvement is observed in the crystallinity of the films after annealing at 300 °C. Annealing at 400 °C significantly improved the crystalline properties of the films with the formation of about 5 nm grains. The films annealed at 300 °C show no response to C2H5OH (ethanol) and a little response to H2, with maximum response obtained at 280 °C. The films annealed at 400 °C show a very good response to H2 and a moderate response to C2H5OH (ethanol) at 150 °C. XPS analysis revealed that annealing of the WO3 thin films at 400 °C produces a significant change in stoichiometry, increasing the number of oxygen vacancies in the film, which is highly beneficial for gas sensing. Our results demonstrate that gas sensors with significant performance at low operating temperatures can be obtained by annealing the WO3 films at 400 °C and optimizing the crystallinity and nanostructure of the as-deposited films.

Meta-regulation approach of law : a potential legal strategy to develop socially responsible business self-regulation in least developed common law countries

In the corporate regulation landscape, 'meta-regulation' is a comparatively new legal approach. The sketchy role of state promulgated authoritative laws in pluralized society and scepticism in corporate self-regulation's role have resulted in the development of this legal approach. It has opened up possibilities to synthesize corporate governance to add social values in corporate self-regulation. The core of this approach is the fusion of responsive and reflexive legal strategies to combine regulators and regulatees for reaching a particular goal. This paper argues that it is a potential strategy that can be successfully deployed to develop a socially responsible corporate culture for the business enterprises, so that they will be able to acquire social, environmental and ethical values in their self-regulation sustainably. Taking Bangladeshi corporate laws as an instance, this paper also evaluates the scope of incorporating this approach in laws of the least developed common law countries in general.

Psychological wellbeing of refugees resettling in Australia : a literature review prepared for the Australian Psychological Society

This literature review was developed as background for the formulation of an Australian Psychological Society position on the mental health and wellbeing of refugees resettling in Australia. The major aim is to provide a broad overview of the concerns related to refugee mental health and wellbeing within the Australian context. To begin, a brief overview of the definition of a refugee and the scope of refugee movement is provided. Next, the review examines the pre-displacement, post-displacement, systemic and socio-political factors that influence the process of adaptation in refugee resettlement. It then reviews documented approaches to psychological assessment and therapeutic interventions with refugees; and finally it summarises suggestions for assessment and intervention in these practice contexts.

Thermogravimetric analysis of the copper silicate mineral dioptase Cu6[Si6O18]·6H2O

There have been a few studies on the thermal decomposition of dioptase Cu6[Si6O18]·6H2O. The results of these analyses are somewhat conflicting and the conclusions vary among these thermo-analytical studies. The objective of this research is to report the thermal analysis of dioptase from different origins and to show the mechanism of decomposition. Thermal decomposition occurs over a very wide temperature range from around 400 to 730 °C with the loss of water. Two additional mass loss steps are observed at around 793 and 835 °C with loss of oxygen. The infrared spectra of dioptase in the hydroxyl stretching region enables the hydrogen bond distances of water molecules in the dioptase structure to be calculated. The large variation in the hydrogen bond distances offers an explanation as to why the decomposition of dioptase with loss of water occurs over such a wide temperature range.

The role of the board of directors in ensuring a culture of integrity

Corporate scandals are as old as the corporate form itself. Consider, for example, the controversies surrounding the role of one of the first modern corporations, the British East India Company, in the Bengal famine of 1770 and in the Chinese opium trade. Yet it is the increasing scale and scope of unethical acts carried out by individuals in the name, and interests, of corporations that continue to be concerning. Recent revelations surrounding the extent of bribery and covert surveillance used by News Corporation journalists in its British operations continue to shock the world and undermine confidence in that organiszation and journalists in general. Yet despite the systemic nature of many of these unethical activities, corporate leaders generally plead ignorance when transgressions come to light. During the enquity into the News Corporation scandal, Rupert Murdoch, the CEO and chairman, rejected the assertion that he was ultimately 'responsible for this whole fiasco' (House of Commons, 2011, Q.230). Instead, like many corporate leaders before him, Murdoch placed blame on the employees within the newspaper. His responses poses an increasingly important question: Do corporate leaders bear responsibility for the conduct of individuals within a corporation and, if so, why?

Toward an in-depth understanding of cardiovascular interventional nursing : a qualitative study into nursing within the cardiac catheterisation laboratory setting

Introduction: Nursing in the cardiac catheterisation laboratory (CCL) varies globally in terms of scope and deployment. In the US, all allied staff are cross-trained into all CCL roles. The Australian and New Zealand experience has legislative frameworks that reserves specific functions to nurses. Yet, the nursing role within the CCL is poorly researched and defined. Aim: This study sought to gain deeper understanding of the perceived role of CCL nurses in Australia and New Zealand. Method: A descriptive qualitative study using semi-structured in-depth interviews was used. A cross-sectional sample of 23 senior clinical nurses or nursing managers representing 16 CCLs across Australia and New Zealand was obtained. Data were digitally recorded and transcribed verbatim prior to analysis by three researchers. Results: Five major themes emerged from the data. These themes were: 1. The CCL is a unique environment; 2. CCL nursing is a unique and advanced cardiac nursing discipline; 3. The recruitment attributes for CCL nurses are advanced; 4. Education needs to be standardised; and 5. The evidence to support practice is poor. Discussion: The CCL environment is a dynamic, deeply interdisciplinary setting with CCL nursing seen to be a unique advanced practice role. Yet the time has come for a scope of practice, educational standards, guidelines and competencies was expressed by the participants. Conclusion: Nursing in the CCL is an advanced practice role working within a complex interdisciplinary environment. Further work is required to define the role of CCL nurses together with the evidence-base for their practice.

40 years of cancer nursing in Australia : the emergence of a specialty

Over the past 40 years, the nature and scope of cancer nursing practice has been shaped to a large extent by scientific and medical advances, as well as by social, economic and political factors. Nurses’ role in cancer care has evolved from being predominantly functional and dependent in its approach to being a specialty with clearly defined standards of practice underpinned by a growing evidence base and an agreed set of professional performance capabilities. The unique contribution that nurses make to minimising the effects of cancer on a person’s life and improving the patient experience is now well established and Australian cancer nurses are recognised as leaders in the field internationally. Nurses have achieved improved outcomes for people affected by cancer as part of a multidisciplinary team. By being active participants in the Clinical Oncological Society of Australia for at least 30 of the organisation’s 40 year history, Australian cancer nurses have been provided unique opportunities for professional development and inter-professional collaboration. To meet future challenges in delivering quality cancer care, cancer nurses will need to be full partners with consumers and with other health professionals in redesigning health care systems that are more responsive to changes in social, demographic, scientific and technological contexts.

Influence of synthesis route on the catalytic properties of La1−xSrxMnO3

Lanthanum Strontium Manganate (LSM) powders were synthesized by six different routes, namely solid state reaction, drip pyrolysis, citrate, sol-gel, carbonate and oxalate co-precipitation. The LSM samples, produced by firing to 1000 °C for 5 h were then characterized by way of XRD, TPD's of oxygen, TPR and catalytic activity for a simple oxidation reaction, that of carbon monoxide to carbon dioxide. It was found that although the six samples had similar compositions and surface areas they performed quite differently during catalytic characterization. These observed differences correlated more closely to the mode of synthesis, than to the physical properties of the powders, or their impurity levels, indicating that the surface structures created by the different syntheses perform very differently under catalysis conditions. Co-precipitation and drip pyrolysis produced structures that were most efficient at facilitating oxidation type reactions.

In situ imaging of catalytic etching on silver during methanol oxidation conditions by environmental scanning electron microscopy

Polycrystalline silver is used to catalytically oxidise methanol to formaldehyde. This paper reports the results of extensive investigations involving the use of environmental scanning electron microscopy (ESEM) to monitor structural changes in silver during simulated industrial reaction conditions. The interaction of oxygen, nitrogen, and water, either singly or in combination, with a silver catalyst at temperatures up to 973 K resulted in the appearance of a reconstructed silver surface. More spectacular was the effect an oxygen/methanol mixture had on the silver morphology. At a temperature of ca. 713 K pinholes were created in the vicinity of defects as a consequence of subsurface explosions. These holes gradually increased in size and large platelet features were created. Elevation of the catalyst temperature to 843 K facilitated the wholescale oxygen induced restructuring of the entire silver surface. Methanol reacted with subsurface oxygen to produce subsurface hydroxyl species which ultimately formed water in the subsurface layers of silver. The resultant hydrostatic pressure forced the silver surface to adopt a "hill and valley" conformation in order to minimise the surface free energy. Upon approaching typical industrial operating conditions widespread explosions occurred on the catalyst and it was also apparent that the silver surface was extremely mobile under the applied conditions. The interaction of methanol alone with silver resulted in the initial formation of pinholes primarily in the vicinity of defects, due to reaction with oxygen species incorporated in the catalyst during electrochemical synthesis. However, dramatic reduction in the hole concentration with time occurred as all the available oxygen became consumed. A remarkable correlation between formaldehyde production and hole concentration was found.

In situ Raman studies of the selective oxidation of methanol to formaldehyde and ethene to ethylene oxide on a polycrystalline silver catalyst

The combined techniques of in situ Raman microscopy and scanning electron microscopy (SEM) have been used to study the selective oxidation of methanol to formaldehyde and the ethene epoxidation reaction over polycrystalline silver catalysts. The nature of the oxygen species formed on silver was found to depend critically upon the exact morphology of the catalyst studied. Bands at 640, 780 and 960 cm-1 were identified only on silver catalysts containing a significant proportion of defects. These peaks were assigned to subsurface oxygen species situated in the vicinity of surface dislocations, AgIII=O sites formed on silver atoms modified by the presence of subsurface oxygen and O2 - species stabilized on subsurface oxygen-modified silver sites, respectively. The selective oxidation of methanol to formaldehyde was determined to occur at defect sites, where reaction of methanol with subsurface oxygen initially produced subsurface OH species (451 cm-1) and adsorbed methoxy species. Two distinct forms of adsorbed ethene were identified on oxidised silver sites. One of these was created on silver sites modified by the interaction of subsurface oxygen species, and the other on silver crystal planes containing a surface coverage of atomic oxygen species. The selective oxidation of ethene to ethylene oxide was achieved by the reaction between ethene adsorbed on modified silver sites and electrophilic AgIII=O species, whereas the combustion reaction was perceived to take place by the reaction of adsorbed ethene with nucleophilic surface atomic oxygen species. Defects were determined to play a critical role in the epoxidation reaction, as these sites allowed the rapid diffusion of oxygen into subsurface positions, and consequently facilitated the formation of the catalytically active AgIII=O sites.