Synthesis and chain-length dependent properties of monodisperse oligo(9,9-di-n-octylfluorene-2,7-vinylene)s

A series of monodisperse oligo(9,9-di-n-octylfluorene-2,7-vinylene)s (OFVs) with fluorene units up to 11 has been synthesized following a divergent approach. Chain length was found to affect not only photophysical properties but also thermal properties. Absorption and photoluminescence spectra are red-shifted with increasing chain length. The effective conjugated length has been extrapolated to be as long as 19 fluorene vinylene units, indicative of a well-conjugated system. With the number of fluorene units > 5, the oligomers exhibit nematic mesomorphism. Glass transition temperature (T-g) and clearing point temperature (T-c) increase with increasing molecular length and with those of OFV11 up to 71 and 230 degrees C, respectively. The oligomers can form uniform films by solution casting for fabrication of light-emitting diodes. With a device structure of ITO/ PEDOT:PSS/OFV11/Ca/Al, a current efficiency of 0.8 cd.A(-1) at a brightness of 1300 cd.m(-2) along with a maximum brightness of 2690 cd.m(-2) have been realized. This performance is notably superior to that of the corresponding polymer.

Hydrothermal synthesis and crystal structure of an unusual compound: [Cu(en)(2)](4)[(SiMo8V4O40)-O-V((VO)-O-IV)(2)][MoO4](2)center dot 5H(2)O

A novel compound [Cu(en)(2)](4)[(SiMo8V4O40)-O-v(V-IV O)(2)] [MoO4](2) . 5H(2)O has been hydrothermally synthesized and structurally characterized by single-crystal X-ray diffraction. Black crystals crystallize in the tetragonal. system, space group 14/m, a = b = 14.019(2) Angstrom, c = 20.341(4) Angstrom, V = 3997.9(11) Angstrom(3), Z = 2, lambda(MoKalpha) = 0.71073 Angstrom (R(F) = 0.0443 for 1819 reflections). Data were collected on a Siemens P4 four-circle diffractometer at 293 K in the range of 1.76 < theta < 24.98degrees using the omega-scan technique. The structure was solved by the direct method and refined by the full-matrix least squares on F-2 method using the SHELXL-97 software. X-ray crystallographic study showed that the title compound contained a bicapped alpha-Keggin fragment [SiMo8 (V4O40)-O-v((VO)-O-IV)(2)](4-) polyoxoanion.

Investigation of proton transfer across the water/1,2-dichloroethane interface by o-phenanthroline using glass micro/nano-pipets and cyclic voltammetry

Facilitated proton transfer across the water/1,2-dichloroethane (DCE) interface supported on the tips of micro- and nano-pipets by o-phenanthroline (Phen) was studied by using cyclic voltammetry. The formed micro- and nano-liquid/liquid interfaces functioned as micro- and nano-electrodes under certain experimental conditions. The dependence of the half-wave potentials on the aqueous solutions acidities was studied and the ratio of association constants between Phen and proton in the aqueous and DCE phases was calculated by the method proposed by Matsuda et al.. The standard rate constant (k(0)) and the transfer coefficient (alpha) evaluated by using nano-pipets were equal to 0.183 +/- 0.054 cm/s and 0.70 +/- 0.09, respectively.

应用玻璃微米/纳米管和循环伏安法研究邻菲咯啉加速质子在水/1,2-二氯乙烷界面的转移过程

利用循环伏安法研究了玻璃微米 /纳米管支持的水 / 1 ,2 -二氯乙烷 ( DCE)界面上邻菲咯啉加速质子的转移过程 .将装有水溶液的微米 /纳米管插入到 DCE溶液中 ,可以形成微米 /纳米级 -液 /液界面 ,在选定的实验条件下 ,其作用类似于微米 /纳米电极 .用微米管考察了此加速转移过程的半波电位与 p H值 ( 1 .1～7.5 )的关系 ,利用 Matsuda等提出的理论公式计算了邻菲咯啉与质子在有机相和水相中的络合常数比 .并用纳米管计算得到邻菲咯啉加速质子在水 / DCE界面转移过程中的标准速率常数 ( k0 )和转移系数 (α)分别为( 0 .1 83± 0 .0 5 4 ) cm/ s和 0 .70± 0 .0

Flexural fatigue behavior of injection-molded composites based on poly(phenylene ether ketone)

Flexural fatigue tests were conducted on injection-molded short fiber composites, carbon fiber/poly(phenylene ether ketone) (PEK-C) and glass fiber/PEK-C (with addition of polyphenylene sulfide for improving adhesion between matrix and fibers), using four-point bending at stress ratio of 0.1. The fatigue behavior of these materials was presented. By comparing the S-N curves and analyzing the fracture surfaces of the two materials, the similarity and difference of the failure mechanisms in the two materials were discussed. It is shown that the flexural fatigue failure of the studied materials is governed by their respective tensile properties. The matrix yielding is main failure mechanism at high stress, while at lower stress the fatigue properties appear fiber and interface dominated. (C) 1997 John Wiley & Sons, Inc.

Morphological, thermal, and mechanical properties of polypropylene/polycarbonate blend

This work deals with the effect of compatibilizer on the morphological, thermal, rheological, and mechanical properties of polypropylene/polycarbonate (PP/ PC) blends. The blends, containing between 0 to 30 vol % of polycarbonate and a compatibilizer, were prepared by means of a twin-screw extruder. The compatibilizer was produced by grafting glycidyl methacrylate (GMA) onto polypropylene in the molten state. Blend morphologies were controlled by adding PP-g-GMA as compatibilizer during melt processing, thus changing dispersion and interfacial adhesion of the polycarbonate phase. With PP-g-GMA, volume fractions increased from 2.5 to 20, and much finer dispersions of discrete polycarbonate phase with average domain sizes decreased from 35 to 3 mu m were obtained. The WAXD spectra showed that the crystal structure of neat PP was different from that in blends. The DSC results suggested that the degree of crystallization of PP in blends decreased as PC content and compatibilizer increased. The mechanical properties significantly changed after addition of PP-g-GMA. (C) 1997 John Wiley & Sons, Inc.

Genetic model of the hydrate system in the fine grain sediments in the northern continental slope of South China Sea

Gas hydrate samples were obtained firstly in China by drilling on the northern margin of South China Sea (SCS). To understand the formation mechanism of this unique accumulation system, this paper discusses the factors controlling the formation of the system by accurate geophysical interpretation and geological analysis, based on the high precision 2-D and 3-D multichannel seismic data in the drilling area. There are three key factors controlling the accumulation of the gas hydrate system in fine grain sediment: (1) large volume of fluid bearing methane gas Joins the formation of gas hydrate. Active fluid flow in the northern South China Sea makes both thermal gas and/or biogenic gas migrate into shallow strata and form hydrate in the gas hydrate stability zone (GHSZ). The fluid flow includes mud diapir and gas chimney structure. They are commonly characterized by positive topographic relief, acoustic turbidity and push-down, and low reflection intensity on seismic profiles. The gas chimneys can reach to GHSZ, which favors the development of BSRs. It means that the active fluid flow has a close relationship with the formation and accumulation of gas hydrate. (2) The episodic process of fracture plays an important role in the generation of gas hydrate. It may provide the passage along which thermogenic or biogenic gas migrated into gas hydrate stability zone (GHSZ) upward. And it increases the pore space for the growth of hydrate crystal. (3) Submarine landslide induced the anomalous overpressure activity and development of fracture in the GHSZ. The formation model of high concentration gas hydrate in the drilling sea area was proposed on the basis of above analysis.

胶州湾及其邻近海域的浮游植物－种类组成与数量变化

研究胶州湾浮游植物的物种组成与时空分布的特点，对于了解该湾生态系统的现状与历史变化趋势以及生态系统对自然条件变化和人类干扰的响应具有重要意义。 本文根据2004年每月一次采集的浮游植物样品，分析了胶州湾浮游植物的物种组成和优势种的时空分布情况。调查发现浮游植物共142种，分属于6门53属，其中硅藻门40属113种，占总物种数的79.6%；甲藻门10属24种，占总物种数的16.9%；其它为金藻门1属2种，裸藻1属1种，绿藻1属2种。浮游植物丰度周年波动范围为11.12－14602.39×104cells/m3，全年平均为1857.55×104cells/m3。全年丰度最高的藻为环纹劳德藻(Lauderia annulata)，出现在2月份，而全年的丰度最高值也出现在2月份。在胶州湾中，硅藻所占比例最大，平均为97.44%，最高为99.95%，最低为82.55%。浮游植物的丰度的周年变化：有两个高峰，分别出现在2月份和10月份，是典型的温带海域双高峰的分布形式。 胶州湾浮游植物的优势种分析，采用Kikvidze等（2002）提出的确定优势种数量的计算方法，再依据各物种的优势度排序最终确定优势种。其中在多样性最低的6月和10月，优势种数目均为1种，分别为丹麦细柱藻（Leptocylindrus danicus）和中肋骨条藻（Skeletonema costatum）。而在多样性指数较低的1月、2月，优势种数目分别为2和3；而在物种多样性比较高的5月、7月、11月，由于分布相对比较分散，所以优势种数量较多。这说明这个方法可以较好地完成对胶州湾浮游植物群落分析时确定优势种的目标。优势种出现频率较多的种类为中肋骨条藻（1、3、4、5、8、10、11、12月）、洛氏角毛藻(Chaetoceros lorenzianus)（7、8、9、11、12月）、尖刺拟菱形藻(Pseudonitzschia pungens)（2、3、5、7月）、加拉星杆藻(Asteronella kariana)（1、2、3、5月）、密联角毛藻(Chaetoceros densus)（5、11、12月）、扭鞘藻(Streptothece thamesis)（7、8、9月）、夜光藻(Noctiluca scintillancs)（4、5、7月）、奇异菱形藻(Nitzschia paradoxa)（5、11、12月）,对这些种的时空分布进行了分析。 对2004年胶州湾的浮游植物数据进行分层聚类分析后，发现可以将胶州湾划分为三个海区：湾南与湾外海区、湾中西部海区、湾东海区。

扇贝裙多肽的制备与分析

海洋生物是新型的肽类次级代谢物的丰富来源，现已从多种生物中发现一系列高活性的抗肿瘤、抗病毒、抗微生物及心血管疾病的活性多肽。以栉孔扇贝裙为原料，利用酶解的方法制备肽混合物，对其进行分离分析，获得高附加值的混合肽制品。通过一系列酶反应动力学研究，进行最佳用酶及其酶解最佳条件的选择。酶解条件为：酶浓度2500单位/每克样品，酶解温度45 ℃， 使用537酸性蛋白酶和1398中性蛋白酶先后于pH3和pH7左右作用共计5个小时。对所得胨肽混合物进行超滤，分级纯化，选择分子量介于600与4000道尔顿之间的混合肽，测定其氨基酸的组成，含有18种氨基酸，其中天门冬氨酸、谷氨酸、甘氨酸含量最高。通过SDS-PAGE对主要成分进行分离并确定分子量大小，电泳结果显示：混合肽主要含有三至五种多肽成分，分子量介于1000至3000道尔顿之间。通过质谱分析得到验证，并确定五种多肽的分子量分别为1714.32、 1857.97、 2034.53、 2474.77、 2492.80道尔顿。

Seasonal variation of reproduction rates and body size of Calanus sinicus in the Southern Yellow Sea, China

Annual variations of egg production rate (EPR) and clutch size of Calanus sinicus, as well as body size of females (prosome length and dry weight), were investigated at a series of stations in the Southern Yellow Sea by onboard incubation. Calanus sinicus was spawning in all the 11 cruises investigated, and the annual variation of EPR was bimodal. Monthly average EPR was highest from May to July, respectively, 5.97, 5.36 and 6.30 eggs female(-1) d(-1), then decreased dramatically to only 1.37 eggs female(-1) d(-1) in August and attained the lowest 1.07 eggs female(-1) d(-1) in October. In November, average EPR increased again to 4.31 eggs female(-1) d(-1). Seasonal variation of clutch size was similar to EPR, except that it decreased gradually after August rather than dramatically as did EPR. Prosome length of females was maximum in May and minimum in October, but dry weight was highest in November. Monthly average EPR correlated better with prosome length than dry weight, while clutch size was rather determined by dry weight of females. It is suggested that egg production of C. sinicus was active during two discontinuous periods when both surface and bottom temperature fell into its favorite range (i.e. 10-23degreesC), and different reproductive strategies were adopted in these two reproductive peaks: other than the highest EPR, longer prosome length was also achieved by C. sinicus from May to July, while females in November developed shorter bodies but accumulated more energy for reproduction.

Identification of quantitative trait loci for growth-related traits in the Pacific abalone Haliotis discus hannai Ino

The locations and effects of quantitative trait loci (QTL) were estimated for nine characters for growth-related traits in the Pacific abalone (Haliotis discus hannai Ino) using a randomly amplified polymorphic DNA (RAPD), amplification fragment length polymorphism (AFLP) and SSR genetic linkage map. Twenty-eight putatively significant QTLs (LOD > 2.4) were detected for nine traits (shell length, shell width, total weight, shell weight, weight of soft part, muscle weight, gonad and digestive gland weight, mantle weight and gill weight). The percentage of phenotypic variation explained by a single QTL ranged from 8.0% to 35.9%. The significant correlations (P < 0.001) were found among all the growth-related traits, and Pearson's correlation coefficients were more than 0.81. For the female map, the QTL for growth were concentrated on groups 1 and 4 linkage maps. On the male map, the QTL that influenced growth-related traits gathered on the groups 1 and 9 linkage maps. Genetic linkage map construction and QTL analysis for growth-related traits are the basis for the marker-assisted selection and will eventually improve production and quality of the Pacific abalone.

On two species of spider crabs of the genus Doclea (Crustacea : Decapoda : Brachyura : Majidae : Pisinae) from China, one of which is new

A new species of spider crab, Doclea unidentata, is described from the South China Sea. Allied to D. brachyrhynchos Bleeker, 1856, and D. macracanthus Bleeker, 1856, it can easily be distinguished by its very short, unidentate rostrum. The identity of Doclea canalifera Stimpson, 1857, is resolved with the selection of a neotype, and it is here regarded as a senior subjective synonym of D. japonica Ortmann, 1893. The taxonomy of this species as well as the allied D. ovis (Fabricius, 1787) is also discussed.