An Analysis of Living Conditions in Rural Villages in China. A New Geography of the Country.

Analysts, politicians and international players from all over the world look at China as one of the most powerful countries on the international scenario, and as a country whose economic development can significantly impact on the economies of the rest of the world. However many aspects of this country have still to be investigated. First the still fundamental role played by Chinese rural areas for the general development of the country from a political, economic and social point of view. In particular, the way in which the rural areas have influenced the social stability of the whole country has been widely discussed due to their strict relationship with the urban areas where most people from the countryside emigrate searching for a job and a better life. In recent years many studies have mostly focused on the urbanization phenomenon with little interest in the living conditions in rural areas and in the deep changes which have occurred in some, mainly agricultural provinces. An analysis of the level of infrastructure is one of the main aspects which highlights the principal differences in terms of living conditions between rural and urban areas. In this thesis, I first carried out the analysis through the multivariate statistics approach (Principal Component Analysis and Cluster Analysis) in order to define the new map of rural areas based on the analysis of living conditions. In the second part I elaborated an index (Living Conditions Index) through the Fuzzy Expert/Inference System. Finally I compared this index (LCI) to the results obtained from the cluster analysis drawing geographic maps. The data source is the second national agricultural census of China carried out in 2006. In particular, I analysed the data refer to villages but aggregated at province level.

Expression profiling und rationale Expressionsoptimierung am Beispiel eines prokaryontischen Wirt-,Vektor-Systems

Durch globale Expressionsprofil-Analysen auf Transkriptom-, Proteom- oder Metabolom-Ebene können biotechnologische Produktionsprozesse besser verstanden und die Erkenntnisse für die zielgerichtete, rationale Optimierung von Expressionssystemen genutzt werden. In der vorliegenden Arbeit wurde die Überexpression einer Glukose-Dehydrogenase (EC 1.1.5.2), die von der Roche Diagnostics GmbH für die diagnostische Anwendung optimiert worden war, in Escherichia coli untersucht. Die Enzymvariante unterscheidet sich in sieben ihrer 455 Aminosäuren vom Wildtyp-Enzym und wird im sonst isogenen Wirt-/Vektor-System in signifikant geringeren Mengen (Faktor 5) gebildet. Das prokaryontische Expressionssystem wurde auf Proteom-Ebene charakterisiert. Die 2-dimensionale differenzielle Gelelektrophorese (DIGE) wurde zuvor unter statistischen Aspekten untersucht. Unter Berücksichtigung von technischen und biologischen Variationen, falsch-positiven (α-) und falsch-negativen (β-) Fehlern sowie einem daraus abgeleiteten Versuchsdesign konnten Expressionsunterschiede als signifikant quantifiziert werden, wenn sie um den Faktor ≥ 1,4 differierten. Durch eine Hauptkomponenten-Analyse wurde gezeigt, dass die DIGE-Technologie für die Expressionsprofil-Analyse des Modellsystems geeignet ist. Der Expressionsstamm für die Enzymvariante zeichnete sich durch eine höhere Variabilität an Enzymen für den Zuckerabbau und die Nukleinsäure-Synthese aus. Im Expressionssystem für das Wildtyp-Enzym wurde eine unerwartet erhöhte Plasmidkopienzahl nachgewiesen. Als potenzieller Engpass in der Expression der rekombinanten Glukose-Dehydrogenase wurde die Löslichkeitsvermittlung identifiziert. Im Expressionsstamm für das Wildtyp-Enzym wurden viele Proteine für die Biogenese der äußeren Membran verstärkt exprimiert. Als Folge dessen wurde ein sog. envelope stress ausgelöst und die Zellen gingen in die stationäre Wuchsphase über. Die Ergebnisse der Proteomanalyse wurden weiterführend dazu genutzt, die Produktionsleistung für die Enzymvariante zu verbessern. Durch den Austausch des Replikationsursprungs im Expressionsvektor wurde die Plasmidkopienzahl erhöht und die zelluläre Expressionsleistung für die diagnostisch interessantere Enzymvariante um Faktor 7 - 9 gesteigert. Um die Löslichkeitsvermittlung während der Expression zu verbessern, wurde die Plasmidkopienzahl gesenkt und die Coexpression von Chaperonen initiiert. Die Ausbeuten aktiver Glukose-Dehydrogenase wurden durch die Renaturierung inaktiven Produkts aus dem optimierten Expressionssystem insgesamt um einen Faktor von 4,5 erhöht. Somit führte im Rahmen dieser Arbeit eine proteombasierte Expressionsprofil-Analyse zur zielgerichteten, rationalen Expressionsoptimierung eines prokaryontischen Modellsystems.

Polycyclic aromatic hydrocarbons (PAHs) in river bank soils

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous and found in the atmosphere, aquatic environment, sediments and soils. For environmental risk assessments and the allocation of the polluter it is important to know the PAH sources. PAH contamination sites are usually the result of anthropogenic processes. Three major sources are known: i) petroleum, including crude oil and its refined products and coals (petrogenic PAHs), ii) burning of organic matter (pyrogenic PAHs) and iii) transformation products of natural organic precursors present in the environment (diagenetic processes). In one case elevated PAH concentrations were found in river bank soils when building a retention area along the Mosel River. The source of the PAHs in this area was unclear and required the investigation of possible sources. To evaluate the PAH distribution along the Mosel River, a section of ~ 160 km along the river and a short section along the Saar River were investigated within this study. Concentrations of the Σ16 EPA PAHs were as high as 81 mg kg-1 dry weight (dw). Additionally, coal particles were identified in some soils, which originated from mining activities in the Saarland region. PAH distribution patterns of the 16 EPA PAHs suggest a mainly pyrogenic origin and in some cases a mixture of pyrogenic and petrogenic origin. For a comprehensive investigation five sampling sites were selected. Two sites were located before the confluence of the Mosel and Saar River, one site at the confluence and two sites after the confluence. The examination included typical forensic methods such as PAH distribution patterns of 45 PAHs (including alkylated PAHs), calculation of PAH ratios, determination of PAH alkyl homologues, n-alkanes, principal component analysis (PCA) and coal petrography. The results revealed a mainly pyrogenic source at sampling sites before the confluence of the two rivers. At and after the confluence, a mixture of pyrogenic and petrogenic inputs were present. With the help of coal petrography, coal derived particles could be identified in these soils. Therefore, coal was suggested to be the petrogenic source. It could be shown that sites with diffuse sources of contaminants, like the bank soils of the Mosel River, are difficult to characterize. As previously mentioned for detailed source identifications, the use of various forensic methods is essential. Determination of PAH alkyl homologue series, biomarkers and isotopes are often recommended. Source identification was evaluated using three different methods (i.e. PAH distribution patterns of an extended PAH spectrum, PAH ratios and analyses of n-alkanes). It was assessed if these methods were sufficient for the initial steps in identifying sources of PAHs in selected samples, and if they could be used for decision-making purposes. Point- and non-point sources were identified by applying the three methods and it could be shown that these relatively simple methods are sufficient in determining the primary source. In a last step of this study two soils (one before the confluence of the Mosel and Saar rivers and one after the confluence), and one sediment of the Mosel River were evaluated by investigating the mutagenic potential of the soils and the sediment with a fluctuation version of the Ames-test. The study showed that coal bearing soils at the Mosel River do not exhibit a greater mutagenic potential than other soils or sediments without coal particles.

Obsessed With Work: A multi-causal and multi-rater approach to workaholism

Workaholism is defined as the combination of two underlying dimensions: working excessively and working compulsively. The present thesis aims at achieving the following purposes: 1) to test whether the interaction between environmental and personal antecedents may enhance workaholism; 2) to develop a questionnaire aimed to assess overwork climate in the workplace; 3) to contrast focal employees’ and coworkers’ perceptions of employees’ workaholism and engagement. Concerning the first purpose, the interaction between overwork climate and person characteristics (achievement motivation, perfectionism, conscientiousness, self-efficacy) was explored on a sample of 333 Dutch employees. The results of moderated regression analyses showed that the interaction between overwork climate and person characteristics is related to workaholism. The second purpose was pursued with two interrelated studies. In Study 1 the Overwork Climate Scale (OWCS) was developed and tested using a principal component analysis (N = 395) and a confirmatory factor analysis (N = 396). Two overwork climate dimensions were distinguished, overwork endorsement and lacking overwork rewards. In Study 2 the total sample (N = 791) was used to explore the association of overwork climate with two types of working hard: work engagement and workaholism. Lacking overwork rewards was negatively associated with engagement, whereas overwork endorsement showed a positive association with workaholism. Concerning the third purpose, using a sample of 73 dyads composed by focal employees and their coworkers, a multitrait-multimethod matrix and a correlated trait-correlated method model, i.e. the CT-C(M–1) model, were examined. Our results showed a considerable agreement between raters on focal employees' engagement and workaholism. In contrast, we observed a significant difference concerning the cognitive dimension of workaholism, working compulsively. Moreover, we provided further evidence for the discriminant validity between engagement and workaholism. Overall, workaholism appears as a negative work-related state that could be better explained by assuming a multi-causal and multi-rater approach.

The effect of two-dimensional squat elements on the seismic behavior of building structures

This thesis reports a study on the seismic response of two-dimensional squat elements and their effect on the behavior of building structures. Part A is devoted to the study of unreinforced masonry infills, while part B is focused on reinforced concrete sandwich walls. Part A begins with a comprehensive review of modelling techniques and code provisions for infilled frame structures. Then state-of-the practice techniques are applied for a real case to test the ability of actual modeling techniques to reproduce observed behaviors. The first developments towards a seismic-resistant masonry infill system are presented. Preliminary design recommendations for the seismic design of the seismic-resistant masonry infill are finally provided. Part B is focused on the seismic behavior of a specific reinforced concrete sandwich panel system. First, the results of in-plane psuudostatic cyclic tests are described. Refinements to the conventional modified compression field theory are introduced in order to better simulate the monotonic envelope of the cyclic response. The refinements deal with the constitutive model for the shotcrete in tension and the embedded bars. Then the hysteretic response of the panels is studied according to a continuum damage model. Damage state limits are identified. Design recommendations for the seismic design of the studied reinforced concrete sandwich walls are finally provided.

Two-Dimensional Bin Packing Problem with Guillotine Restrictions

This thesis, after presenting recent advances obtained for the two-dimensional bin packing problem, focuses on the case where guillotine restrictions are imposed. A mathematical characterization of non-guillotine patterns is provided and the relation between the solution value of the two-dimensional problem with guillotine restrictions and the two-dimensional problem unrestricted is being studied from a worst-case perspective. Finally it presents a new heuristic algorithm, for the two-dimensional problem with guillotine restrictions, based on partial enumeration, and computationally evaluates its performance on a large set of instances from the literature. Computational experiments show that the algorithm is able to produce proven optimal solutions for a large number of problems, and gives a tight approximation of the optimum in the remaining cases.

Computer simulations of two-dimensional colloidal crystals under confinement and shear

In this thesis we are presenting a broadly based computer simulation study of two-dimensional colloidal crystals under different external conditions. In order to fully understand the phenomena which occur when the system is being compressed or when the walls are being sheared, it proved necessary to study also the basic motion of the particles and the diffusion processes which occur in the case without these external forces. In the first part of this thesis we investigate the structural transition in the number of rows which occurs when the crystal is being compressed by placing the structured walls closer together. Previous attempts to locate this transition were impeded by huge hysteresis effects. We were able to determine the transition point with higher precision by applying both the Schmid-Schilling thermodynamic integration method and the phase switch Monte Carlo method in order to determine the free energies. These simulations showed not only that the phase switch method can successfully be applied to systems with a few thousand particles and a soft crystalline structure with a superimposed pattern of defects, but also that this method is way more efficient than a thermodynamic integration when free energy differences are to be calculated. Additionally, the phase switch method enabled us to distinguish between several energetically very similar structures and to determine which one of them was actually stable. Another aspect considered in the first result chapter of this thesis is the ensemble inequivalence which can be observed when the structural transition is studied in the NpT and in the NVT ensemble. The second part of this work deals with the basic motion occurring in colloidal crystals confined by structured walls. Several cases are compared where the walls are placed in different positions, thereby introducing an incommensurability into the crystalline structure. Also the movement of the solitons, which are created in the course of the structural transition, is investigated. Furthermore, we will present results showing that not only the well-known mechanism of vacancies and interstitial particles leads to diffusion in our model system, but that also cooperative ring rotation phenomena occur. In this part and the following we applied Langevin dynamics simulations. In the last chapter of this work we will present results on the effect of shear on the colloidal crystal. The shear was implemented by moving the walls with constant velocity. We have observed shear banding and, depending on the shear velocity, that the inner part of the crystal breaks into several domains with different orientations. At very high shear velocities holes are created in the structure, which originate close to the walls, but also diffuse into the inner part of the crystal.

Verso il consumo sostenibile: i prodotti biologici nelle abitudini alimentari degli italiani

Scegliere di consumare in modo sostenibile significa passare ad un nuovo modello di consumo. Tale modello richiede una maggiore consapevolezza e responsabilità da parte dei consumatori, unite all'adozione di nuovi stili di vita e di scelte d’acquisto, che permettano il raggiungimento di elevati livelli di benessere nel rispetto dell'ambiente. Un notevole sforzo è stato compiuto recentemente dai policy maker per incoraggiare il consumo sostenibile quali implementazioni dello sviluppo sostenibile. Ancora lunga, tuttavia, è la strada da percorrere per raggiungere pienamente questo obiettivo. Tra i prodotti sostenibili, il biologico si è rivelato di gran lunga il più rappresentativo: le statistiche di questo mercato mostrano, infatti, tendenze positive, sebbene il consumo risulti ancora eterogeneo e contenuto rispetto al consumo di alimenti convenzionali. Ciò mostra che il comportamento dei consumatori non è ancora abbastanza reattivo alle suddette politiche. Il presente studio si propone di contribuire alla ricerca sul consumo sostenibile approfondendo i fattori che incoraggiano o impediscono il consumo di prodotti alimentari biologici in Italia. Adottando un nuovo approccio si cerca di capire come i diversi segmenti di diete alimentari affrontino gli alimenti biologici in termini di consumi e di atteggiamenti. Un'analisi multivariata a più fasi è stata condotta su un campione di 3.004 consumatori. Un’analisi delle componenti principali non lineare è stata applicata alle variabili ordinali che misurano il consumo di ventuno categorie di alimenti. Successivamente è stata applicata la cluster analysis che ha dato luogo a quattro segmenti di abitudini alimentari. I prodotti biologici sono diventati parte delle abitudini alimentari in Italia in quasi un terzo della popolazione. Il consumo sembra essersi affermato soprattutto nel segmento con abitudini alimentari sane. Una scarsa attenzione ad una dieta sana, gli stili di vita, il reddito, l'accessibilità, la mancanza di consapevolezza condizionano le abitudini alimentari a scapito di un consumo più sostenibile.

Betreuungsbedürfnisse von Patientinnen im Rahmen der gynäkologischen Krebsfrüherkennungsuntersuchung : Entwicklung eines Erfassungsinstrumentes

Da es bis dato kein spezifisches Instrument gibt, um die Betreuungsbedürfnisse von Patientinnen im Rahmen der gynäkologischen Krebsfrüherkennungsuntersuchung zu erfassen, war es das Ziel der vorliegenden explorativen Studie, eben jene subjektiven Betreuungsbedürfnisse aufzudecken und sie in ein praxistaugliches und messbares Format zu überführen - den Fragebogen „Betreuungsbedürfnisse – Gynäkologische Krebsfrüherkennungsuntersuchung (BB-G KFU)“. Wir stellten hierzu folgende Hypothesen auf: Es ist möglich (a) Betreuungsbedürfnisse zu explorieren und in reliablen Skalen abzubilden, (b) die Wichtigkeit der Betreuungsbedürfnisse in Form einer Wertigkeitsrangfolge abzubilden, (c) Determinanten der Betreuungsbedürfnisse (Alter, Sozialstatus, Familienstand, Gesundheitsbezogene Kontrollüberzeugungen) zu detektieren. Wir entwickelten einen Fragebogen auf der Basis einer ausführlichen systematischen Literaturrecherche, Leitfadeninterviews mit gynäkologischen Patientinnen sowie einer Befragung von 18 Experten. Dieser Fragebogen beinhaltete 58 Arzt bezogene Betreuungsbedürfnisse-Items, 12 Arzthelferinnen bezogene Betreuungsbedürfnisse-Items und 21 Praxisorganisation und Praxisstruktur bezogene Betreuungsbedürfnisse-Items. Die Probandinnen bewerteten die Wichtigkeit der Erfüllung jedes Items anhand einer fünfstufigen Antwortskala im Likert-Format (1 = nicht wichtig, 5 = sehr wichtig). Zudem wurden soziodemografische Daten sowie gesundheitsbezogene Kontrollüberzeugungen der Probandinnen erhoben. Im Sinne einer multizentrisch angelegten Querschnittstudie wurde der Fragebogen an 1.000 Patientinnen in zehn gynäkologischen Praxen in drei deutschen Bundesländern ausgegeben. Insgesamt erhielten wir 965 ausgefüllte Fragebögen zurück. Mittels deskriptiver Statistiken konnten die soziodemografischen Daten sowie die einzelnen Betreuungsbedürfnisse-Items ausgewertet werden. Zur Entwicklung reliabler Betreuungsbedürfnis-Skalen wurde der Datensatz einer Hauptkomponentenanalyse (PCA mit Varimax-Rotation) unterzogen. Auf diesem Wege konnte ein Erfassungsinstrument (Fragebogen „Betreuungsbedürfnisse – Gynäkologische Krebsfrüherkennungsuntersuchung (BB-G KFU)“) bestehend aus sieben reliablen Betreuungsbedürfnis-Skalen (BB-S) entwickelt werden, welche die psychosozialen Betreuungsbedürfnisse und -wünsche von Patientinnen mit Bezug auf den Gynäkologen (BB-S-A), die Arzthelferin (BB-S-AH) sowie die Praxisstruktur (BB-S-P) abzubilden vermögen: „Bedürfnis nach Information“ (BB-S-A-I), „Bedürfnis nach Respekt und Einfühlungsvermögen im Rahmen der körperlichen Untersuchung“ (BB-S-A-RE), „Bedürfnis nach Zuwendung und Verfügbarkeit“ (BB-S-A-ZV), „Bedürfnis nach Zuwendung und Service“ (BB-S-AH-ZS), „Bedürfnis nach logistischer Unterstützung“ (BB-S-AH-L), „Bedürfnis nach Basisausstattung und Erreichbarkeit“ (BB-S-P-BE) und „Bedürfnis nach Zusatzausstattung“ (BB-S-P-Z). Die durch die drei arztbezogenen Komponenten (bestehend aus 33 Items) aufgeklärte Gesamtvarianz beträgt 40,29%, die der arzthelferinnenbezogenen 2-Komponentenlösung (11 Items) 48,92%, und die Totalvarianz der zwei Dimensionen mit Bezug auf die Praxisstruktur (19 Items) liegt bei 41,68%. Die Reliabilitäten der sieben Skalen sind als akzeptabel bis sehr gut zu bewerten (Cronbachs α = .71 - .89). Anhand der Korrelationen zum KKG (Fragen zu Kontrollüberzeugungen über Krankheit und Gesundheit von Lohaus und Schmitt) konnten erste positive Hinweise auf die Validität des BB-G KFU gefunden werden. Durch den Vergleich der einzelnen Mittelwerte konnte die hierarchische Organisation der Betreuungsbedürfnisse gemäß ihrer Wichtigkeit sichtbar gemacht werden: Die Arbeit zeigt, dass Patientinnen im Rahmen der gynäkologischen KFU der Informationsvermittlung durch den Arzt (BB-S-A-I; M = 1,51; SD = 0,47) wie auch der ärztlichen Zuwendung und Verfügbarkeit (BB-S-A-ZV; M = 1,39; SD = 0,38) in der Wertigkeitsrangfolge einen besonders hohen Platz einräumen. Die Datenanalysen zeigen zudem eine Abhängigkeit der Betreuungsbedürfnisse vom Alter und vom Sozialstatus der Patientinnen, jedoch nicht vom Familienstand und den gesundheitsbezogenen Kontrollüberzeugungen.

Meta-analyses qualify metzincins and related genes as acute rejection markers in renal transplant patients

Definition of acute renal allograft rejection (AR) markers remains clinically relevant. Features of T-cell-mediated AR are tubulointerstitial and vascular inflammation associated with excessive extracellular matrix (ECM) remodeling, regulated by metzincins, including matrix metalloproteases (MMP). Our study focused on expression of metzincins (METS), and metzincins and related genes (MARGS) in renal allograft biopsies using four independent microarray data sets. Our own cases included normal histology (N, n = 20), borderline changes (BL, n = 4), AR (n = 10) and AR + IF/TA (n = 7). MARGS enriched in all data sets were further examined on mRNA and/or protein level in additional patients. METS and MARGS differentiated AR from BL, AR + IF/TA and N in a principal component analysis. Their expression changes correlated to Banff t- and i-scores. Two AR classifiers, based on METS (including MMP7, TIMP1), or on MARGS were established in our own and validated in the three additional data sets. Thirteen MARGS were significantly enriched in AR patients of all data sets comprising MMP7, -9, TIMP1, -2, thrombospondin2 (THBS2) and fibrillin1. RT-PCR using microdissected glomeruli/tubuli confirmed MMP7, -9 and THBS2 microarray results; immunohistochemistry showed augmentation of MMP2, -9 and TIMP1 in AR. TIMP1 and THBS2 were enriched in AR patient serum. Therefore, differentially expressed METS and MARGS especially TIMP1, MMP7/-9 represent potential molecular AR markers.

Two-dimensional linear-combination model fitting of magnetic resonance spectra to define the macromolecule baseline using FiTAID, a Fitting Tool for Arrays of Interrelated Datasets

To propose the determination of the macromolecular baseline (MMBL) in clinical 1H MR spectra based on T(1) and T(2) differentiation using 2D fitting in FiTAID, a general Fitting Tool for Arrays of Interrelated Datasets.

Surface-acoustic-wave counterflow micropumps for on-chip liquid motion control in two-dimensional microchannel arrays

Fully controlled liquid injection and flow in hydrophobic polydimethylsiloxane (PDMS) two-dimensional microchannel arrays based on on-chip integrated, low-voltage-driven micropumps are demonstrated. Our architecture exploits the surface-acoustic-wave (SAW) induced counterflow mechanism and the effect of nebulization anisotropies at crossing areas owing to lateral propagating SAWs. We show that by selectively exciting single or multiple SAWs, fluids can be drawn from their reservoirs and moved towards selected positions of a microchannel grid. Splitting of the main liquid flow is also demonstrated by exploiting multiple SAW beams. As a demonstrator, we show simultaneous filling of two orthogonal microchannels. The present results show that SAW micropumps are good candidates for truly integrated on-chip fluidic networks allowing liquid control in arbitrarily shaped two-dimensional microchannel arrays.